Study of plasma activated water effect on heavy metal bioaccumulation by Cannabis sativa Using Laser-Induced Breakdown Spectroscopy.

Contamination of the environment with toxic metals such as cadmium or lead is a worldwide issue. The accumulator of metals Cannabis sativa L. has potential to be utilized in phytoremediation, which is an environmentally friendly way of soil decontamination. Novel non-thermal plasma-based technologies may be a helpful tool in this process. Plasma activated water (PAW), prepared by contact of gaseous plasma with water, contains reactive oxygen and nitrogen species, which enhance the growth of plants. In this study, C. sativa was grown in a short-term toxicity test in a medium which consisted of plasma activated water prepared by dielectric barrier discharge with liquid electrode and different concentrations of cadmium or lead. Application of PAW on heavy metal contaminated C. sativa resulted in increased growth under Pb contamination as was determined by ecotoxicology tests. Furthermore, the PAW influence on the bioaccumulation of these metals as well as the influence on the nutrient composition of plants was studied primarily by applying Laser-induced breakdown spectroscopy (LIBS). The LIBS elemental maps show that C. sativa accumulates heavy metals mainly in the roots. The results present a new proof-of-concept in which PAW could be used to improve the growth of plants in heavy metal contaminated environment, while LIBS can be implemented to study the phytoremediation efficiency.

Laser Irradiation of Gd-Si and Gd-Si-Ge Colloid Mixtures for the Fabrication of Compound Nanoparticles.

Binary (Gd5 Si4 , GdSi) and ternary (Gd5 Si2 Ge2 ) compound nanoparticles (NPs) were prepared by laser irradiation of a mixture of colloidal solutions containing NPs of the relevant elements. It is assumed that the compound NPs are formed by heating, co-melting, and chemical interactions in the alloyed droplets. The blackbody-like radiation of the heated NPs was used for temperature control of the NP-preparation process. The obtained results demonstrate that laser irradiation of colloidal NPs provides unique possibilities not only for the synthesis of compound NPs but also for control of their phase composition and size. The synthesized Gd-based compound NPs exhibited magnetic transition at an ordering temperature, TC , in the range of 310-320 K. Thus, the magnetic properties of the synthesized particles confirm their potential for biomedical applications, in particular, for magnetic hyperthermia treatment.

Atmospheric Pressure Microwave Plasma Jet for Organic Thin Film Deposition.

In this work, the potential of a microwave (MW)-induced atmospheric pressure plasma jet (APPJ) in film deposition of styrene and methyl methacrylate (MMA) precursors is investigated. Plasma properties during the deposition and resultant coating characteristics are studied. Optical emission spectroscopy (OES) results indicate a higher degree of monomer dissociation in the APPJ with increasing power and a carrier gas flow rate of up to 250 standard cubic centimeters per minute (sccm). Computational fluid dynamic (CFD) simulations demonstrate non-uniform monomer distribution near the substrate and the dependency of the deposition area on the monomer-containing gas flow rate. A non-homogeneous surface morphology and topography of the deposited coatings is also observed using atomic force microscopy (AFM) and SEM. Coating chemical analysis and wettability are studied by XPS and water contact angle (WCA), respectively. A lower monomer flow rate was found to result in a higher C-O/C-C ratio and a higher wettability of the deposited coatings.