Molecular detection of Orientia tsutsugamushi in ectoparasites & their small mammal hosts captured from scrub typhus endemic areas in Madurai district, India.

BACKGROUND OBJECTIVES: Scrub typhus, caused by Orientia tsutsugamushi present in small mammals harbouring the ectoparasites. A study was undertaken to detect the pathogen present in small mammals and its ectoparasites in the scrub typhus-reported areas. METHODS: The small mammals (rodents/shrews) and its ectoparasites were screened for O. tsutsugamushi using nested PCR amplification of the groEL gene. Small mammals were collected by trapping and screened for ectoparasites (mites, ticks and fleas) by combing method. RESULTS: All the chigger mites collected were tested negative for O. tsutsugamushi . Interestingly, adult non-trombiculid mites ( Oribatida sp., Dermanyssus gallinae ), fleas ( Xenopsylla astia, X. cheopis, Ctenophalides felis and Ctenophalides sp.) and ticks ( Rhipicephalus sanguineus , R. haemaphysaloides ) screened were found to be positive for O. tsutsugamushi , which the authors believe is the first report on these species globally. Bandicota bengalensis with O. tsutsugamushi infection is reported for the first time in India. The O. tsutsugamushi groEL sequences from the positive samples were similar to the reference strains, Karp and Ikeda and phylogenetically clustered in clade IV with less evolutionary divergence. The blood samples of Rattus rattus , Suncus murinus and B. bengalensis collected from this area were tested positive for O. tsutsugamushi ; interestingly, the sequence similarity was much pronounced with their ectoparasites indicating the transmission of the pathogen to host or vice versa . INTERPRETATION CONCLUSIONS: The outcome of the present investigations widened our scope on the pathogens present in ectoparasites and rodents/shrews from this area. This will help to formulate the required vector control methods to combat zoonotic diseases.

Neonatal Paenibacilliosis: Paenibacillus Infection as a Novel Cause of Sepsis in Term Neonates With High Risk of Sequelae in Uganda.

BACKGROUND: Paenibacillus thiaminolyticus may be an underdiagnosed cause of neonatal sepsis. METHODS: We prospectively enrolled a cohort of 800 full-term neonates presenting with a clinical diagnosis of sepsis at 2 Ugandan hospitals. Quantitative polymerase chain reaction specific to P. thiaminolyticus and to the Paenibacillus genus were performed on the blood and cerebrospinal fluid (CSF) of 631 neonates who had both specimen types available. Neonates with Paenibacillus genus or species detected in either specimen type were considered to potentially have paenibacilliosis, (37/631, 6%). We described antenatal, perinatal, and neonatal characteristics, presenting signs, and 12-month developmental outcomes for neonates with paenibacilliosis versus clinical sepsis due to other causes. RESULTS: Median age at presentation was 3 days (interquartile range 1, 7). Fever (92%), irritability (84%), and clinical signs of seizures (51%) were common. Eleven (30%) had an adverse outcome: 5 (14%) neonates died during the first year of life; 5 of 32 (16%) survivors developed postinfectious hydrocephalus (PIH) and 1 (3%) additional survivor had neurodevelopmental impairment without hydrocephalus. CONCLUSIONS: Paenibacillus species was identified in 6% of neonates with signs of sepsis who presented to 2 Ugandan referral hospitals; 70% were P. thiaminolyticus. Improved diagnostics for neonatal sepsis are urgently needed. Optimal antibiotic treatment for this infection is unknown but ampicillin and vancomycin will be ineffective in many cases. These results highlight the need to consider local pathogen prevalence and the possibility of unusual pathogens when determining antibiotic choice for neonatal sepsis.

Morphological and molecular characterization of Aedes aegypti variant collected from Tamil Nadu, India.

BACKGROUND & OBJECTIVES: Accurate mosquito species identification is the basis of entomological surveys and effective vector control. Mosquito identification is either done morphologically using diagnostic features mentioned in taxonomic keys or by molecular methods using cytochrome oxidase subunit 1 (coxI) and Internal transcribed spacer 2 (ITS2). METHODS: We performed a larval survey for Aedes mosquitoes from eight different geographical regions in Tamil Nadu, India. The mosquitoes collected during the survey were characterized using both morphological and molecular markers. RESULTS: During an entomological survey from eight different geographical regions in Southern India, a morphological variety named Aedes aegypti var. luciensis was observed. The variant mosquitoes were characterized using both morphological and molecular markers. The variant mosquitoes differed only in the dark scaling of 5th segment of hind-tarsi. Around one third to two third of the 5th segment in variant mosquitoes was dark which has been described as white in identification keys. No other significant difference was observed in adults or immature stages. The variation was heritable and coexisting in the field with the type form mosquitoes. Comparison of the genetic profile of coxI and ITS2 were similar in variant and the type form indicating both of them to be conspecific. INTERPRETATION & CONCLUSION: The morphological variant mosquitoes were found genetically similar to the Ae. aegypti type form. However, considering its high prevalence and coexistence with Ae. aegypti type form in different geographical regions, detailed studies on bionomics, ecology, genetics, behavior as well as its plausible role in disease transmission are warranted.

Analysis and correction of compositional bias in sparse sequencing count data.

BACKGROUND: Count data derived from high-throughput deoxy-ribonucliec acid (DNA) sequencing is frequently used in quantitative molecular assays. Due to properties inherent to the sequencing process, unnormalized count data is compositional, measuring relative and not absolute abundances of the assayed features. This compositional bias confounds inference of absolute abundances. Commonly used count data normalization approaches like library size scaling/rarefaction/subsampling cannot correct for compositional or any other relevant technical bias that is uncorrelated with library size. RESULTS: We demonstrate that existing techniques for estimating compositional bias fail with sparse metagenomic 16S count data and propose an empirical Bayes normalization approach to overcome this problem. In addition, we clarify the assumptions underlying frequently used scaling normalization methods in light of compositional bias, including scaling methods that were not designed directly to address it. CONCLUSIONS: Compositional bias, induced by the sequencing machine, confounds inferences of absolute abundances. We present a normalization technique for compositional bias correction in sparse sequencing count data, and demonstrate its improved performance in metagenomic 16s survey data. Based on the distribution of technical bias estimates arising from several publicly available large scale 16s count datasets, we argue that detailed experiments specifically addressing the influence of compositional bias in metagenomics are needed.

Fe-Dy Nanogranular Thin Films: Investigation of Structural, Microstructural and Magnetic Properties.

A series of Fe100-xDyx thin films with the concentration range x = 6 to 35 were fabricated by dc magnetron sputtering process. X-ray diffraction and TEM studies revealed that films have separate Fe and Dy nanograins and that there is no intermixing of Fe and Dy thus forming nanogranular films. This unmixed behaviour in our thin films is very different from the bulk Fe-Dy alloys where several stoichiometric compounds can be formed. Magnetic properties of the films have been systematically studied. The contribution to the total magnetization is due to the Fe grains and the Dy grains are paramagnetic down to 4 K. The saturation magnetization of all the samples is significantly lower than that of bulk Fe due to the existence of superparamagnetic Fe grains. Upon increasing x, the in-plane magnetic anisotropy is found to decrease and the samples become isotropic. The zero field cooled and field cooled magnetization measurements also confirmed the presence of the superparamagnetic Fe grains.

Regulated CRISPR Modules Exploit a Dual Defense Strategy of Restriction and Abortive Infection in a Model of Prokaryote-Phage Coevolution.

CRISPRs offer adaptive immunity in prokaryotes by acquiring genomic fragments from infecting phage and subsequently exploiting them for phage restriction via an RNAi-like mechanism. Here, we develop and analyze a dynamical model of CRISPR-mediated prokaryote-phage coevolution that incorporates classical CRISPR kinetics along with the recently discovered infection-induced activation and autoimmunity side effects. Our analyses reveal two striking characteristics of the CRISPR defense strategy: that both restriction and abortive infections operate during coevolution with phages, driving phages to much lower densities than possible with restriction alone, and that CRISPR maintenance is determined by a key dimensionless combination of parameters, which upper bounds the activation level of CRISPRs in uninfected populations. We contrast these qualitative observations with experimental data on CRISPR kinetics, which offer insight into the spacer deletion mechanism and the observed low CRISPR prevalence in clinical isolates. More generally, we exploit numerical simulations to delineate four regimes of CRISPR dynamics in terms of its host, kinetic, and regulatory parameters.

Evaluating the Surface Characteristics of Stainless Steel, TMA, Timolium, and Titanium-niobium Wires: An in vivo Scanning Electron Microscope Study.

BACKGROUND: Recent metallurgical research and advancement in material science has benefited orthodontists in the selection of an appropriate wire size and alloy type, which is necessary to provide an optimum and predictable treatment results. The purpose of the study was to clinically evaluate and compare the surface characteristics of 16 x 22 stainless steel, Titanium molybdenum alloy, timolium, and titanium-niobium before and after placing them in a patient's mouth for 3 months using a scanning electron microscope (SEM). MATERIALS AND METHODS: The total sample size was 40, which were divided into four groups (group 1 - stainless steel wires, 10 samples, group 2 - TMA wires, 10 samples, group 3 - timolium wires, 10 samples, and group 4 - titanium-niobium wires, 10 samples), and these were further subdivided into 5 each. The first subgroup of five samples was placed in the patient's mouth and was evaluated under SEM, and another subgroup of five samples was directly subjected to the SEM. RESULTS: Scanning electron microscopic evaluation of surface characteristics of unused 16 x 22 rectangular stainless steel wire under 500 x magnification showed an overall smooth surface. Stainless steel wire samples placed in the patient's mouth showed black hazy patches, which may be interoperated as areas of stress. TMA unused wires showed multiple small voids of areas and small craters with fewer elevated regions. The TMA wire samples placed in the patient's mouth showed black hazy patches and prominent ridges, making the wire rougher. Timolium unused archwires showed heavy roughness and voids, whereas wires tested in the patient's mouth showed homogeneous distribution of deep cracks and craters. Unused titanium-niobium archwires showed uniform prominent striations and ridges with occasional voids, whereas wires used in the patient's mouth showed prominent huge voids that could be interpreted as maximum stress areas. CONCLUSION: Stainless steel (group 1) used and unused wires showed smooth surface characteristics when compared with all the other three groups followed by timolium, which was superior to titanium-niobium wires and TMA wires. CLINICAL SIGNIFICANCE: Timolium wires are superior to titanium-niobium wires and TMA wires.

Wide Composite Resection of Sternal Metastasis & Reconstruction Using Titanium Mesh Implant and Myocutaneous Flap in Differentiated Thyroid Carcinoma: Case Report of Two Cases.

Differentiated Thyroid carcinoma (DTC) with distant skeletal metastases is associated with a very poor prognosis and are unfortunately resistant to radioiodine therapy (RIT). Surgical removal of the metastases in such selected cases is a beneficial adjunct to RIT. We report two cases of DTC with sternal metastases whom we successfully managed with surgical resection of the sternal lesion with reconstruction of the chest wall defect using titanium mesh implant and myocutaneous flap.

Paenibacillus spp infection among infants with postinfectious hydrocephalus in Uganda: an observational case-control study.

BACKGROUND: Paenibacillus thiaminolyticus is a cause of postinfectious hydrocephalus among Ugandan infants. To determine whether Paenibacillus spp is a pathogen in neonatal sepsis, meningitis, and postinfectious hydrocephalus, we aimed to complete three separate studies of Ugandan infants. The first study was on peripartum prevalence of Paenibacillus in mother-newborn pairs. The second study assessed Paenibacillus in blood and cerebrospinal fluid (CSF) from neonates with sepsis. The third study assessed Paenibacillus in CSF from infants with hydrocephalus. METHODS: In this observational study, we recruited mother-newborn pairs with and without maternal fever (mother-newborn cohort), neonates (aged ≤28 days) with sepsis (sepsis cohort), and infants (aged ≤90 days) with hydrocephalus with and without a history of neonatal sepsis and meningitis (hydrocephalus cohort) from three hospitals in Uganda between Jan 13, 2016 and Oct 2, 2019. We collected maternal blood, vaginal swabs, and placental samples and the cord from the mother-newborn pairs, and blood and CSF from neonates and infants. Bacterial content of infant CSF was characterised by 16S rDNA sequencing. We analysed all samples using quantitative PCR (qPCR) targeting either the Paenibacillus genus or Paenibacillus thiaminolyticus spp. We collected cranial ultrasound and computed tomography images in the subset of participants represented in more than one cohort. FINDINGS: No Paenibacillus spp were detected in vaginal, maternal blood, placental, or cord blood specimens from the mother-newborn cohort by qPCR. Paenibacillus spp was detected in 6% (37 of 631 neonates) in the sepsis cohort and, of these, 14% (5 of 37 neonates) developed postinfectious hydrocephalus. Paenibacillus was the most enriched bacterial genera in postinfectious hydrocephalus CSF (91 [44%] of 209 patients) from the hydrocephalus cohort, with 16S showing 94% accuracy when validated by qPCR. Imaging showed progression from Paenibacillus spp-related meningitis to postinfectious hydrocephalus over 1-3 months. Patients with postinfectious hydrocephalus with Paenibacillus spp infections were geographically clustered. INTERPRETATION: Paenibacillus spp causes neonatal sepsis and meningitis in Uganda and is the dominant cause of subsequent postinfectious hydrocephalus. There was no evidence of transplacental transmission, and geographical evidence was consistent with an environmental source of neonatal infection. Further work is needed to identify routes of infection and optimise treatment of neonatal Paenibacillus spp infection to lessen the burden of morbidity and mortality. FUNDING: National Institutes of Health and Boston Children's Hospital Office of Faculty Development.

Analysis of mobility based COVID-19 epidemic model using Federated Multitask Learning.

Aggregating a massive amount of disease-related data from heterogeneous devices, a distributed learning framework called Federated Learning(FL) is employed. But, FL suffers in distributing the global model, due to the heterogeneity of local data distributions. To overcome this issue, personalized models can be learned by using Federated multitask learning(FMTL). Due to the heterogeneous data from distributed environment, we propose a personalized model learned by federated multitask learning (FMTL) to predict the updated infection rate of COVID-19 in the USA using a mobility-based SEIR model. Furthermore, using a mobility-based SEIR model with an additional constraint we can analyze the availability of beds. We have used the real-time mobility data sets in various states of the USA during the years 2020 and 2021. We have chosen five states for the study and we observe that there exists a correlation among the number of COVID-19 infected cases even though the rate of spread in each case is different. We have considered each US state as a node in the federated learning environment and a linear regression model is built at each node. Our experimental results show that the root-mean-square percentage error for the actual and prediction of COVID-19 cases is low for Colorado state and high for Minnesota state. Using a mobility-based SEIR simulation model, we conclude that it will take at least 400 days to reach extinction when there is no proper vaccination or social distance.

Differential richness inference for 16S rRNA marker gene surveys.

BACKGROUND: Individual and environmental health outcomes are frequently linked to changes in the diversity of associated microbial communities. Thus, deriving health indicators based on microbiome diversity measures is essential. While microbiome data generated using high-throughput 16S rRNA marker gene surveys are appealing for this purpose, 16S surveys also generate a plethora of spurious microbial taxa. RESULTS: When this artificial inflation in the observed number of taxa is ignored, we find that changes in the abundance of detected taxa confound current methods for inferring differences in richness. Experimental evidence, theory-guided exploratory data analyses, and existing literature support the conclusion that most sub-genus discoveries are spurious artifacts of clustering 16S sequencing reads. We proceed to model a 16S survey's systematic patterns of sub-genus taxa generation as a function of genus abundance to derive a robust control for false taxa accumulation. These controls unlock classical regression approaches for highly flexible differential richness inference at various levels of the surveyed microbial assemblage: from sample groups to specific taxa collections. The proposed methodology for differential richness inference is available through an R package, Prokounter. CONCLUSIONS: False species discoveries bias richness estimation and confound differential richness inference. In the case of 16S microbiome surveys, supporting evidence indicate that most sub-genus taxa are spurious. Based on this finding, a flexible method is proposed and is shown to overcome the confounding problem noted with current approaches for differential richness inference. Package availability: https://github.com/mskb01/prokounter.

Genetic structure and connectivity among Aedes aegypti populations within Madurai city in Southern India.

We investigated the genetic variability and differentiation among 12 Ae. aegypti populations collected within the Madurai city in Tamil Nadu state of Southern India. Genotyping of 12 microsatellite markers in 353 individual samples showed moderate levels of genetic diversity among 12 populations. UPGMA tree, hierarchical clustering, Bayesian clustering and Discriminant Analysis on Principal Components roughly divided these populations into two genetic clusters: main city populations and the populations located at the border of the corporation limit. Significant positive correlation between genetic and geographic distance was observed among 12 populations, however, the correlation was non-significant within each genetic cluster. Population assignment and divMigrate graph depicted less migration between two groups. Overall, the findings of this study provided an overview of Ae. aegypti population structure within an urban setting in India that have implications in effective implementation of vector control in the city area.

A parameter estimation technique for stochastic self-assembly systems and its application to human papillomavirus self-assembly.

Virus capsid assembly has been a key model system for studies of complex self-assembly but it does pose some significant challenges for modeling studies. One important limitation is the difficulty of determining accurate rate parameters. The large size and rapid assembly of typical viruses make it infeasible to directly measure coat protein binding rates or deduce them from the relatively indirect experimental measures available. In this work, we develop a computational strategy to deduce coat-coat binding rate parameters for viral capsid assembly systems by fitting stochastic simulation trajectories to experimental measures of assembly progress. Our method combines quadratic response surface and quasi-gradient descent approximations to deal with the high computational cost of simulations, stochastic noise in simulation trajectories and limitations of the available experimental data. The approach is demonstrated on a light scattering trajectory for a human papillomavirus (HPV) in vitro assembly system, showing that the method can provide rate parameters that produce accurate curve fits and are in good concordance with prior analysis of the data. These fits provide an insight into potential assembly mechanisms of the in vitro system and give a basis for exploring how these mechanisms might vary between in vitro and in vivo assembly conditions.

A framework for assessing 16S rRNA marker-gene survey data analysis methods using mixtures.

BACKGROUND: There are a variety of bioinformatic pipelines and downstream analysis methods for analyzing 16S rRNA marker-gene surveys. However, appropriate assessment datasets and metrics are needed as there is limited guidance to decide between available analysis methods. Mixtures of environmental samples are useful for assessing analysis methods as one can evaluate methods based on calculated expected values using unmixed sample measurements and the mixture design. Previous studies have used mixtures of environmental samples to assess other sequencing methods such as RNAseq. But no studies have used mixtures of environmental to assess 16S rRNA sequencing. RESULTS: We developed a framework for assessing 16S rRNA sequencing analysis methods which utilizes a novel two-sample titration mixture dataset and metrics to evaluate qualitative and quantitative characteristics of count tables. Our qualitative assessment evaluates feature presence/absence exploiting features only present in unmixed samples or titrations by testing if random sampling can account for their observed relative abundance. Our quantitative assessment evaluates feature relative and differential abundance by comparing observed and expected values. We demonstrated the framework by evaluating count tables generated with three commonly used bioinformatic pipelines: (i) DADA2 a sequence inference method, (ii) Mothur a de novo clustering method, and (iii) QIIME an open-reference clustering method. The qualitative assessment results indicated that the majority of Mothur and QIIME features only present in unmixed samples or titrations were accounted for by random sampling alone, but this was not the case for DADA2 features. Combined with count table sparsity (proportion of zero-valued cells in a count table), these results indicate DADA2 has a higher false-negative rate whereas Mothur and QIIME have higher false-positive rates. The quantitative assessment results indicated the observed relative abundance and differential abundance values were consistent with expected values for all three pipelines. CONCLUSIONS: We developed a novel framework for assessing 16S rRNA marker-gene survey methods and demonstrated the framework by evaluating count tables generated with three bioinformatic pipelines. This framework is a valuable community resource for assessing 16S rRNA marker-gene survey bioinformatic methods and will help scientists identify appropriate analysis methods for their marker-gene surveys.

Octamer and heat shock elements regulate transcription from the AcMNPV polyhedrin gene promoter.

The baculovirus expression vector system exploits the polyhedrin (polh) promoter for high expression of foreign proteins in insect cells. The mechanism of basal and hyperactivated transcription from this promoter, however, remains poorly understood. We have analyzed the 4-kb upstream region of the polh promoter; deletion of two separate parts of the 4-kb upstream region, harboring the Oct binding site and the heat shock element, respectively, resulted in significant reduction of reporter gene expression regulated by the polh promoter. Insect cell host factors could bind to these elements in vitro. Moreover, these elements could activate polh transcription during viral infection when present upstream of a minimal polh promoter in transient expression reporter assays. Our results suggest the possible existence of transcription factors belonging to the POU and heat shock transcription factor family in Spodoptera frugiperda cells and support the hypothesis that host proteins may play a major role in activating transcription from the polh promoter.

Effect of Implant Abutment Acid Etching on the Retention of Crowns Luted with Different Cements: An In Vitro Comparative Evaluation.

BACKGROUND: Air abrasion of the implant abutment surface improves the bond strength of luting agents. However, the effect of acid etching and combination of air abrasion and acid etching on the bond strength of various luting agents under masticatory load is yet to be documented. PURPOSE: The purpose of this study was to evaluate the effect of implant abutment surface modifications on the tensile bond strength (TBS) of cast metal copings (CMCs) luted with different luting agents, subjected to cyclic fatigue loads. MATERIALS AND METHODS: A total of 150 Ni-Cr CMCs were made on commercially pure titanium (Cp-Ti) laboratory analogues. The samples were categorized into three groups based on surface modifications and five subgroups for luting agents. The CMCs were cemented to the respective surface-modified groups, stored in distilled water at 37°C for 24 hours, and then subjected to load cycling, followed by tensile loading. One-way analysis of variance (ANOVA) was used to compare the mean bond strength between luting agents. RESULTS: Self-adhesive resin cement showed the highest TBS followed by resin-modified glass ionomer cement, zinc polycarboxylate, and zinc phosphate cement. Non-eugenol temporary cement showed least TBS values on all modified abutment surfaces. CONCLUSION: Air abrasion + acid etching (HY) provided the greatest TBS followed by acid-etched (AE) surface only. Air-abraded (AA) surface yielded the least TBS for luting agents.

Hybrid metagenomic assembly enables high-resolution analysis of resistance determinants and mobile elements in human microbiomes.

Characterization of microbiomes has been enabled by high-throughput metagenomic sequencing. However, existing methods are not designed to combine reads from short- and long-read technologies. We present a hybrid metagenomic assembler named OPERA-MS that integrates assembly-based metagenome clustering with repeat-aware, exact scaffolding to accurately assemble complex communities. Evaluation using defined in vitro and virtual gut microbiomes revealed that OPERA-MS assembles metagenomes with greater base pair accuracy than long-read (>5×; Canu), higher contiguity than short-read (~10× NGA50; MEGAHIT, IDBA-UD, metaSPAdes) and fewer assembly errors than non-metagenomic hybrid assemblers (2×; hybridSPAdes). OPERA-MS provides strain-resolved assembly in the presence of multiple genomes of the same species, high-quality reference genomes for rare species (<1%) with ~9× long-read coverage and near-complete genomes with higher coverage. We used OPERA-MS to assemble 28 gut metagenomes of antibiotic-treated patients, and showed that the inclusion of long nanopore reads produces more contiguous assemblies (200× improvement over short-read assemblies), including more than 80 closed plasmid or phage sequences and a new 263 kbp jumbo phage. High-quality hybrid assemblies enable an exquisitely detailed view of the gut resistome in human patients.

Structure, morphology and magnetization of Fe-Pd thin films.

Several Fe(100-x)Pd(x0 thin films with x = 24-35 have been investigated to understand their structural, morphological and magnetic properties. The lattice spacing d111 obtained from the X-ray diffraction peaks shows a gradual increase with increasing x and this behaviour is attributed to the increasing substitution of Pd with larger atomic radius. While the atomic force microscopy images on selected samples showed surface roughness in the range 2-4 nm the scanning electron microscopy image of a Fe71Pd29 sample showed slightly dark and bright regions due to the large undulations of the surface of the films. We presume that these undulations are due to shape memory twin variants. In-plane magnetization measurements were carried out on selected films in applied magnetic fields up to 30 kOe. For three samples, the saturation magnetization is about 1300 emu/cc whereas for the Fe71Pd29 film it is about 950 emu/cc. The remanence ratio of the films is approximately in the range 50-70%. The behaviour of coercivity of our samples is believed to be due to grain size effect that generally plays a predominant role in thin films with nanometer size grains.

Nanogranular Fe-Cu-Ag thin films: structure, microstructure and giant magnetoresistance.

Fe(x)Cu(y)Ag(z) granular thin films with several compositions were prepared by dc magnetron sputtering. These films consist of small Fe magnetic particles embedded in a nonmagnetic CuAg matrix. Structure, microstructure, morphology and magnetotransport properties were studied. The compositions of these samples were determined by energy-dispersive X-ray analysis. X-ray diffraction results showed strong Ag(111) peaks and broad Cu(111) peaks in all the samples. The variation of the (111) lattice spacings indicates a partial intermixing of Fe, Cu and Ag atoms. Microstructural studies using transmission electron microscopy (TEM) on a selected sample showed only Ag reflections and no reflection from Cu and Fe. Both XRD and TEM studies did not reveal any diffraction peak due to Fe and Cu for this sample. The fitting of the experimental grain size data obtained from TEM micrograph to the lognormal distribution function has allowed an estimation of the average grain diameter of 3.7 nm. The surface image of the Fe22Ag78 film observed using a scanning electron microscope showed the presence of droplet like Ag particles on the film surface. The Cu substitution results in smooth films without any Ag particles on the surface. Surface morphology by atomic force microscopy shows that the Fe39Cu13Ag48 film has a surface roughness of 0.75 nm. Finally, we have obtained a maximum giant magnetoresistance ratio of 3.2% in these films measured at 300 K for an in-plane magnetic field of 20 kOe.