RESUMO
Glucose belongs among the most important substances in both physiology and industry. Current food and biotechnology praxis emphasizes its on-line continuous monitoring and regulation. These provoke increasing demand for systems, which enable fast detection and regulation of deviations from desired glucose concentration. We demonstrated control of glucose concentration by feedback regulation equipped with in situ optical fiber glucose sensor. The sensitive layer of the sensor comprises oxygen-dependent ruthenium complex and preimmobilized glucose oxidase both entrapped in organic-inorganic polymer ORMOCER®. The sensor was placed in the laboratory bioreactor (volume 5 L) to demonstrate both regulations: the control of low levels of glucose concentrations (0.4 and 0.1 mM) and maintenance of the glucose concentration (between 2 and 3.5 mM) during stationary phase of cultivation of Saccharomyces cerevisiae. Response times did not exceed 6 min (average 4 min) with average deviation of 4%. Due to these regulation characteristics together with durable and long-lasting (≥2 month) sensitive layer, this feedback regulation system might find applications in various biotechnological processes such as production of low glucose content beverages.
Assuntos
Saccharomyces cerevisiae , Retroalimentação , Glucose , Glucose Oxidase , Fibras ÓpticasRESUMO
In this study, we show the repetitive detection of toluene on a tapered optical fiber element (OFE) with an attached layer of Pseudomonas putida TVA8 bioluminescent bioreporters. The bioluminescent cell layer was attached on polished quartz modified with (3-aminopropyl)triethoxysilane (APTES). The repeatability of the preparation of the optical probe and its use was demonstrated with five differently shaped OFEs. The intensity of measured bioluminescence was minimally influenced by the OFE shape, possessing transmittances between 1.41% and 5.00%. OFE probes layered with P. putida TVA8 were used to monitor liquid toluene over a two-week period. It was demonstrated that OFE probes layered with positively induced P. putida TVA8 bioreporters were reliable detectors of toluene. A toluene concentration of 26.5 mg/L was detected after <30 min after immersion of the probe in the toluene solution. Additional experiments also immobilized constitutively bioluminescent cells of E. coli 652T7, on OFEs with polyethyleneimine (PEI). These OFEs were repetitively induced with Lauria-Bertani (LB) nutrient medium. Bioluminescence appeared 15 minutes after immersion of the OFE in LB. A change in pH from 7 to 6 resulted in a decrease in bioluminescence that was not restored following additional nutrient inductions at pH 7. The E. coli 652T7 OFE probe was therefore sensitive to negative influences but could not be repetitively used.
Assuntos
Técnicas Biossensoriais , Hidrocarbonetos Aromáticos/análise , Medições Luminescentes , Escherichia coli , Fibras Ópticas , Pseudomonas putida , Tolueno/análiseRESUMO
Mercury is a ubiquitous environmental pollutant of dominantly anthropogenic origin. A critical concern for human health is the introduction of mercury to the food chain; therefore, monitoring of mercury levels in agricultural soil is essential. Unfortunately, the total mercury content is not sufficiently informative as mercury can be present in different forms with variable bioavailability. Since 1990, the use of bioreporters has been investigated for assessment of the bioavailability of pollutants; however, real contaminated soils have rarely been used in these studies. In this work, a bioassay with whole-cell bacterial bioreporter Escherichia coli ARL1 was used for estimation of bioavailable concentration of mercury in 11 soil samples. The bioreporter emits bioluminescence in the presence of Hg(II). Four different pretreatments of soil samples prior to the bioassay were tested. Among them, laccase mediated extraction was found to be the most suitable over water extraction, alkaline extraction, and direct use of water-soil suspensions. Nevertheless, effect of the matrix on bioreporter signal was found to be severe and not possible to be completely eliminated by the method of standard addition. In order to elucidate the matrix role, influences of humic acid and selected metal ions present in soil on the bioreporter signal were tested separately in laboratory solutions. Humic acids were found to have a positive effect on the bioreporter growth, but a negative effect on the measured bioluminescence, likely due to shading and Hg binding resulting in decreased bioavailability. Each of the tested metal ions solutions affected the bioluminescence signal differently; cobalt (II) positively, iron (III) negatively, and the effects of iron (II) and nickel (II) were dependent on their concentrations. In conclusion, the information on bioavailable mercury estimated by bioreporter E. coli ARL1 is valuable, but the results must be interpreted with caution. The route to functional bioavailability bioassay remains long.
Assuntos
Técnicas Biossensoriais , Substâncias Húmicas , Mercúrio , Poluentes do Solo , Monitoramento Ambiental , Escherichia coli , Mercúrio/análise , Solo , Poluentes do Solo/análiseRESUMO
Cell wall envelopes treated with sodium hydroxide and spray-dried were used as mercury sorbents. The sorbent having sorption capacity 17.7 ± 0.1 µmol/g determined was employed for preconcentration of mercury containing 1-10 ng/L. After preconcentration, bioavailable mercury was detected in samples of soil, stream, and tap water via induction of bioluminescence of E. coli ARL1. Iron and manganese at concentrations of tenth microgram per liter interfered bioluminescence detection of mercury. In tap water was detected semiquantitatively 0.127 ± 0.1 nmol/L by the induction of bioluminescence of E. coli ARL1 in medium with tryptone after preconcentration using a method of standard addition.
Assuntos
Técnicas Biossensoriais/métodos , Escherichia coli/genética , Escherichia coli/metabolismo , Mercúrio/análise , Medições Luminescentes , Solo/química , Água/químicaRESUMO
This review summarizes principles and current stage of development of fiber-optic chemical sensors (FOCS) and biosensors (FOBS). Fiber optic sensor (FOS) systems use the ability of optical fibers (OF) to guide the light in the spectral range from ultraviolet (UV) (180 nm) up to middle infrared (IR) (10 µm) and modulation of guided light by the parameters of the surrounding environment of the OF core. The introduction of OF in the sensor systems has brought advantages such as measurement in flammable and explosive environments, immunity to electrical noises, miniaturization, geometrical flexibility, measurement of small sample volumes, remote sensing in inaccessible sites or harsh environments and multi-sensing. The review comprises briefly the theory of OF elaborated for sensors, techniques of fabrications and analytical results reached with fiber-optic chemical and biological sensors.
Assuntos
Bioensaio/instrumentação , Técnicas Biossensoriais/instrumentação , Tecnologia de Fibra Óptica/instrumentação , Fibras Ópticas , Técnicas de Química Analítica/instrumentação , Desenho de Equipamento , HumanosRESUMO
In this paper, we analysed the steady state fluorescence spectra of cell suspensions containing healthy and carcinoma fibroblast mouse cells, using a genetic-algorithm-spectra-decomposition software (GASpeD). In contrast to other deconvolution algorithms, such as polynomial or linear unmixing software, GASpeD takes into account light scatter. In cell suspensions, light scatter plays an important role as it depends on the number of cells, their size, shape, and coagulation. The measured fluorescence spectra were normalized, smoothed and deconvoluted into four peaks and background. The wavelengths of intensities' maxima of lipopigments (LR), FAD, and free/bound NAD(P)H (AF/AB) of the deconvoluted spectra matched published data. In deconvoluted spectra at pH = 7, the fluorescence intensities of the AF/AB ratio in healthy cells was always higher in comparison to carcinoma cells. In addition, the AF/AB ratio in healthy and carcinoma cells were influenced differently by changes in pH. In mixtures of healthy and carcinoma cells, AF/AB decreases when more than 13% of carcinoma cells are present. Expensive instrumentation is not required, and the software is user friendly. Due to these attributes, we hope that this study will be a first step in the development of new cancer biosensors and treatments with the use of optical fibers.
Assuntos
Algoritmos , Carcinoma , Animais , Camundongos , Fluorescência , Espectrometria de Fluorescência , Software , Técnicas de Cultura de CélulasRESUMO
Initially described in 1990, Pseudomonas fluorescens HK44 served as the first whole-cell bioreporter genetically endowed with a bioluminescent (luxCDABE) phenotype directly linked to a catabolic (naphthalene degradative) pathway. HK44 was the first genetically engineered microorganism to be released in the field to monitor bioremediation potential. Subsequent to that release, strain HK44 had been introduced into other solids (soils, sands), liquid (water, wastewater), and volatile environments. In these matrices, it has functioned as one of the best characterized chemically-responsive environmental bioreporters and as a model organism for understanding bacterial colonization and transport, cell immobilization strategies, and the kinetics of cellular bioluminescent emission. This review summarizes the characteristics of P. fluorescens HK44 and the extensive range of its applications with special focus on the monitoring of bioremediation processes and biosensing of environmental pollution.
Assuntos
Bioensaio/instrumentação , Técnicas Biossensoriais/instrumentação , Monitoramento Ambiental/instrumentação , Pseudomonas fluorescens/efeitos dos fármacos , Pseudomonas fluorescens/fisiologia , Espectrometria de Fluorescência/instrumentação , Desenho de Equipamento , Análise de Falha de EquipamentoRESUMO
Living cells of the lux-based bioluminescent bioreporter Pseudomonas putida TVA8 were encapsulated in a silica hydrogel attached to the distal wider end of a tapered quartz fiber. Bioluminescence of immobilized cells was induced with toluene at high (26.5 mg/L) and low (5.3 mg/L) concentrations. Initial bioluminescence maxima were achieved after >12 h. One week after immobilization, a biofilm-like layer of cells had formed on the surface of the silica gel. This resulted in shorter response times and more intensive bioluminescence maxima that appeared as rapidly as 2 h after toluene induction. Considerable second bioluminescence maxima were observed after inductions with 26.5 mg toluene/L. The second and third week after immobilization the biosensor repetitively and semiquantitatively detected toluene in buffered medium. Due to silica gel dissolution and biofilm detachment, the bioluminescent signal was decreasing 20-32 days after immobilization and completely extinguished after 32 days. The reproducible formation of a surface cell layer on the wider end of the tapered optical fiber can be translated to various whole cell bioluminescent biosensor devices and may serve as a platform for in-situ sensors.
RESUMO
In the continuous systems, such as continuous beer fermentation, immobilized cells are kept inside the bioreactor for long periods of time. Thus an important factor in the design and performance of the immobilized yeast reactor is immobilized cell viability and physiology. Both the decreasing specific glucose consumption rate (q(im)) and intracellular redox potential of the cells immobilized to spent grains during continuous cultivation in bubble-column reactor implied alterations in cell physiology. It was hypothesized that the changes of the physiological state of the immobilized brewing yeast were due to the aging process to which the immobilized yeast are exposed in the continuous reactor. The amount of an actively growing fraction (X(im)act) of the total immobilized biomass (X(im)) was subsequently estimated at approximately X(im)act = 0.12 g(IB) g(C)(-1) (IB = dry immobilized biomass, C = dry carrier). A mathematical model of the immobilized yeast biofilm growth on the surface of spent grain particles based on cell deposition (cell-to-carrier adhesion and cell-to-cell attachment), immobilized cell growth, and immobilized biomass detachment (cell outgrowth, biofilm abrasion) was formulated. The concept of the active fraction of immobilized biomass (X(im)act) and the maximum attainable biomass load (X(im)max) was included into the model. Since the average biofilm thickness was estimated at ca. 10 microm, the limitation of the diffusion of substrates inside the yeast biofilm could be neglected. The model successfully predicted the dynamics of the immobilized cell growth, maximum biomass load, free cell growth, and glucose consumption under constant hydrodynamic conditions in a bubble-column reactor. Good agreement between model simulations and experimental data was achieved.
Assuntos
Cerveja/microbiologia , Biofilmes/crescimento & desenvolvimento , Reatores Biológicos/microbiologia , Técnicas de Cultura de Células/métodos , Grão Comestível/microbiologia , Saccharomyces cerevisiae/fisiologia , Aderência Bacteriana/fisiologia , Catálise , Proliferação de Células , Células Imobilizadas/fisiologia , Simulação por Computador , Fermentação/fisiologia , Cinética , Modelos BiológicosRESUMO
Microorganism Pseudomonas species P2 metabolizes polychlorinated biphenyls (PCBs) and biphenyl, producing the whole spectrum of intermediates, among them coloured intermediates, which are suitable for the monitoring of PCBs degradation by optical sensors. Knowledge of chemical structures and conditions of development of colour metabolites is necessary for application of optical analytical methods. The main goal of this work was the isolation and identification of intermediates from the biodegradation of the mixture of low chlorinated biphenyls (Delor-103), which is based on the solid phase extraction (SPE) of the whole mixture using LiChrolut EN cartridges, then silylation of the extract as one way to the identification of one part of intermediates by GC-MS, and acetylation of the extract as a way for the further concentration and analysis of more polar chlorobiphenylols and chlorobiphenyldiols. The combination of SPE and following acetylation allows to obtain chlorobiphenylols and chlorobiphenyldiols as an almost pure fraction. The acetylation method could be also used instead SPE procedure with the same final concentration effect. Using the simulation mass spectrometry program, two new compounds, dihydrodihydroxytrichloro- and tetrahydrodihydroxytrichlorobiphenyl, as silylderivatives, were identified.
Assuntos
Monitoramento Ambiental/métodos , Poluentes Ambientais/isolamento & purificação , Bifenilos Policlorados/isolamento & purificação , Biodegradação Ambiental , Monitoramento Ambiental/instrumentação , Cromatografia Gasosa-Espectrometria de Massas , Bifenilos Policlorados/química , Pseudomonas/crescimento & desenvolvimentoRESUMO
The immobilization of cells or enzymes is a promising tool for the development of biosensors, yet the interactions between the fixative materials and the cells are not fully understood, especially with respect to their impact on both cell metabolism and cell-to-cell signaling. We show that the spatiotemporal dynamics of waves of metabolic synchronization of yeast cells provides a new criterion to distinguish the effect of different gels on the cellular metabolism, which otherwise could not be detected. Cells from the yeast Saccharomyces carlsbergensis were immobilized into agarose gel, silica gel (TMOS), or a mixture of TMOS and alginate. We compared these immobilized cells with respect to their ability to generate temporal, intracellular oscillations in glycolysis as well as propagating, extracellular synchronization waves. While the temporal dynamics, as measured by the period and the number of oscillatory cycles, was similar for all three immobilized cell populations, significant differences have been observed with respect to the shape of the waves, wave propagation direction and velocity in the three gel matrices used.
Assuntos
Células Imobilizadas/metabolismo , Géis/química , Saccharomyces cerevisiae/metabolismo , Células Imobilizadas/química , Enzimas Imobilizadas/química , Enzimas Imobilizadas/metabolismo , Glicólise , NADP/metabolismo , Saccharomyces cerevisiae/química , Sílica Gel/química , Fatores de TempoRESUMO
In this work, we have compared the entrapment of free or previously immobilized glucose oxidase using a sol-gel technique. The preimmobilization was carried out on Sepabeads (a porous support) derivatized with glutaraldehyde as the functional group. The prior immobilization of the enzyme permitted to maintain the enzyme activity intact after the formation of the sol-gel. In fact, only 10% of the enzyme activity was lost whereas the soluble enzyme lost 60% of its initial activity. Additionally, enzyme leakage from the sol-gel matrix was avoided, which was relatively high when entrapping the soluble enzyme (39% of the enzyme activity was released after 16 h of incubation in a buffered solution). Moreover, the immobilized enzyme, inside the porous support, cannot be in contact with the sol-gel, and, therefore, it maintained the stability achieved by means of the multipoint covalent attachment on the Sepabeads support.