Further thermo-stabilization of thermophilic rhodopsin from Thermus thermophilus JL-18 through engineering in extramembrane regions.

It is known that a hyperthermostable protein tolerable at temperatures over 100°C can be designed from a soluble globular protein by introducing mutations. To expand the applicability of this technology to membrane proteins, here we report a further thermo-stabilization of the thermophilic rhodopsin from Thermus thermophilus JL-18 as a model membrane protein. Ten single mutations in the extramembrane regions were designed based on a computational prediction of folding free-energy differences upon mutation. Experimental characterizations using the UV-visible spectroscopy and the differential scanning calorimetry revealed that four of ten mutations were thermo-stabilizing: V79K, T114D, A115P, and A116E. The mutation-structure relationship of the TR constructs was analyzed using molecular dynamics simulations at 300 K and at 1800 K that aimed simulating structures in the native and in the random-coil states, respectively. The native-state simulation exhibited an ion-pair formation of the stabilizing V79K mutant as it was designed, and suggested a mutation-induced structural change of the most stabilizing T114D mutant. On the other hand, the random-coil-state simulation revealed a higher structural fluctuation of the destabilizing mutant S8D when compared to the wild type, suggesting that the higher entropy in the random-coil state deteriorated the thermal stability. The present thermo-stabilization design in the extramembrane regions based on the free-energy calculation and the subsequent evaluation by the molecular dynamics may be useful to improve the production of membrane proteins for structural studies.

Membrane protein structure determination by SAD, SIR, or SIRAS phasing in serial femtosecond crystallography using an iododetergent.

The 3D structure determination of biological macromolecules by X-ray crystallography suffers from a phase problem: to perform Fourier transformation to calculate real space density maps, both intensities and phases of structure factors are necessary; however, measured diffraction patterns give only intensities. Although serial femtosecond crystallography (SFX) using X-ray free electron lasers (XFELs) has been steadily developed since 2009, experimental phasing still remains challenging. Here, using 7.0-keV (1.771 Å) X-ray pulses from the SPring-8 Angstrom Compact Free Electron Laser (SACLA), iodine single-wavelength anomalous diffraction (SAD), single isomorphous replacement (SIR), and single isomorphous replacement with anomalous scattering (SIRAS) phasing were performed in an SFX regime for a model membrane protein bacteriorhodopsin (bR). The crystals grown in bicelles were derivatized with an iodine-labeled detergent heavy-atom additive 13a (HAD13a), which contains the magic triangle, I3C head group with three iodine atoms. The alkyl tail was essential for binding of the detergent to the surface of bR. Strong anomalous and isomorphous difference signals from HAD13a enabled successful phasing using reflections up to 2.1-Å resolution from only 3,000 and 4,000 indexed images from native and derivative crystals, respectively. When more images were merged, structure solution was possible with data truncated at 3.3-Å resolution, which is the lowest resolution among the reported cases of SFX phasing. Moreover, preliminary SFX experiment showed that HAD13a successfully derivatized the G protein-coupled A2a adenosine receptor crystallized in lipidic cubic phases. These results pave the way for de novo structure determination of membrane proteins, which often diffract poorly, even with the brightest XFEL beams.

Strategy for Stabilization of CutA1 Proteins Due to Ion-Ion Interactions at Temperatures of over 100 °C.

In order to elucidate the contribution of charged residues to protein stabilization at temperatures of over 100 °C, we constructed many mutants of the CutA1 protein ( EcCutA1) from Escherichia coli. The goal was to see if one can achieve the same stability as for a CutA1 from hyperthermophile Pyrococcus horikoshii that has the denaturation temperature near 150 °C. The hydrophobic mutant of EcCutA1 ( Ec0VV) with denaturation temperature ( Td) of 113.2 °C was used as a template for mutations. The highest Td of Ec0VV mutants substituted by a single charged residue was 118.4 °C. Multiple ion mutants were also constructed by combination of single mutants and found to have an increased thermostability. The highest stability of multiple mutants was a mutant substituted by nine charged residues that had a Td of 142.2 °C. To evaluate the energy of ion-ion interactions of mutant proteins, we used the structural ensemble obtained by a molecular dynamics simulation at 300 K. The Td of ionic mutants linearly increases with the increments of the computed energy of ion-ion interactions for ionic mutant proteins even up to the temperatures near 140 °C, suggesting that ion-ion interactions cumulatively contribute to the stabilization of a protein at high temperatures.

Availability of NHS-biotin labeling to identify free protein lysine revealed by experiment and MD simulation.

It is known that the crystallizability of protein molecules may be improved by replacing their surface lysine residues with other residue types. Here an experimental method to identify surface lysine residues by NHS-biotin chemical modification combined with MALDI-TOF MS was proposed and was evaluated using PH1033 protein from Pyrococcus horikoshii. Interestingly, the biotinylation experiment with a protein-reagent molar ratio of 1:1 revealed that only seven of twenty-two lysine residues in the protein comprising 144 residues were labeled. To investigate the result, we analyzed structures from a molecular-dynamics simulation mimicking the experiment. A logistic regression analysis revealed that the biotinylation was significantly correlated with four factors relevant to the local environment of lysine residues: the solvent accessibility, the electrostatic energy, the number of hydrogen bonds, and the estimated pKa value. This result is overall in agreement with that from the same analysis on the crystal structure. However, reflecting the flexibility of the protein molecule in solution state, the factors except for the electrostatic energy were highly variable in the MD structures depending upon the protonation state of Tyr87. The present procedure of biotin-labeling can avoid lysine residues with extensive intramolecular interactions that are incompatible with the rational design of protein crystals.

The first crystal structure of NAD-dependent 3-dehydro-2-deoxy-D-gluconate dehydrogenase from Thermus thermophilus HB8.

2-Keto-3-deoxygluconate (KDG) is one of the important intermediates in pectin metabolism. An enzyme involved in this pathway, 3-dehydro-3-deoxy-D-gluconate 5-dehydrogenase (DDGDH), has been identified which converts 2,5-diketo-3-deoxygluconate to KDG. The enzyme is a member of the short-chain dehydrogenase (SDR) family. To gain insight into the function of this enzyme at the molecular level, the first crystal structure of DDGDH from Thermus thermophilus HB8 has been determined in the apo form, as well as in complexes with the cofactor and with citrate, by X-ray diffraction methods. The crystal structures reveal a tight tetrameric oligomerization. The secondary-structural elements and catalytically important residues of the enzyme were highly conserved amongst the proteins of the NAD(P)-dependent SDR family. The DDGDH protomer contains a dinucleotide-binding fold which binds the coenzyme NAD(+) in an intersubunit cleft; hence, the observed oligomeric state might be important for the catalytic function. This enzyme prefers NAD(H) rather than NADP(H) as the physiological cofactor. A structural comparison of DDGDH with mouse lung carbonyl reductase suggests that a significant difference in the α-loop-α region of this enzyme is associated with the coenzyme specificity. The structural data allow a detailed understanding of the functional role of the conserved catalytic triad (Ser129-Tyr144-Lys148) in cofactor and substrate recognition, thus providing substantial insights into DDGDH catalysis. From analysis of the three-dimensional structure, intersubunit hydrophobic interactions were found to be important for enzyme oligomerization and thermostability.

Crystal structures of type IIIH NAD-dependent D-3-phosphoglycerate dehydrogenase from two thermophiles.

In the L-Serine biosynthesis, D-3-phosphoglycerate dehydrogenase (PGDH) catalyzes the inter-conversion of D-3-phosphoglycerate to phosphohydroxypyruvate. PGDH belongs to 2-hydroxyacid dehydrogenases family. We have determined the crystal structures of PGDH from Sulfolobus tokodaii (StPGDH) and Pyrococcus horikoshii (PhPGDH) using X-ray diffraction to resolution of 1.77Å and 1.95Å, respectively. The PGDH protomer from both species exhibits identical structures, consisting of substrate binding domain and nucleotide binding domain. The residues and water molecules interacting with the NAD are identified. The catalytic triad residues Glu-His-Arg are highly conserved. The residues involved in the dimer interface and the structural features responsible for thermostability are evaluated. Overall, structures of PGDHs with two domains and histidine at the active site are categorized as type IIIH and such PGDHs structures having this type are reported for the first time.

Crystal structure studies of NADP+ dependent isocitrate dehydrogenase from Thermus thermophilus exhibiting a novel terminal domain.

NADP(+) dependent isocitrate dehydrogenase (IDH) is an enzyme catalyzing oxidative decarboxylation of isocitrate into oxalosuccinate (intermediate) and finally the product α-ketoglutarate. The crystal structure of Thermus thermophilus isocitrate dehydrogenase (TtIDH) ternary complex with citrate and cofactor NADP(+) was determined using X-ray diffraction method to a resolution of 1.80 Å. The overall fold of this protein was resolved into large domain, small domain and a clasp domain. The monomeric structure reveals a novel terminal domain involved in dimerization, very unique and novel domain when compared to other IDH's. And, small domain and clasp domain showing significant differences when compared to other IDH's of the same sub-family. The structure of TtIDH reveals the absence of helix at the clasp domain, which is mainly involved in oligomerization in other IDH's. Also, helices/beta sheets are absent in the small domain, when compared to other IDH's of the same sub family. The overall TtIDH structure exhibits closed conformation with catalytic triad residues, Tyr144-Asp248-Lys191 are conserved. Oligomerization of the protein is quantized using interface area and subunit-subunit interactions between protomers. Overall, the TtIDH structure with novel terminal domain may be categorized as a first structure of subfamily of type IV.

Integrated database of information from structural genomics experiments.

Information from structural genomics experiments at the RIKEN SPring-8 Center, Japan has been compiled and published as an integrated database. The contents of the database are (i) experimental data from nine species of bacteria that cover a large variety of protein molecules in terms of both evolution and properties (http://database.riken.jp/db/bacpedia), (ii) experimental data from mutant proteins that were designed systematically to study the influence of mutations on the diffraction quality of protein crystals (http://database.riken.jp/db/bacpedia) and (iii) experimental data from heavy-atom-labelled proteins from the heavy-atom database HATODAS (http://database.riken.jp/db/hatodas). The database integration adopts the semantic web, which is suitable for data reuse and automatic processing, thereby allowing batch downloads of full data and data reconstruction to produce new databases. In addition, to enhance the use of data (i) and (ii) by general researchers in biosciences, a comprehensible user interface, Bacpedia (http://bacpedia.harima.riken.jp), has been developed.

Anomalous signal from S atoms in protein crystallographic data from an X-ray free-electron laser.

X-ray free-electron lasers (FELs) enable crystallographic data collection using extremely bright femtosecond pulses from microscopic crystals beyond the limitations of conventional radiation damage. This diffraction-before-destruction approach requires a new crystal for each FEL shot and, since the crystals cannot be rotated during the X-ray pulse, data collection requires averaging over many different crystals and a Monte Carlo integration of the diffraction intensities, making the accurate determination of structure factors challenging. To investigate whether sufficient accuracy can be attained for the measurement of anomalous signal, a large data set was collected from lysozyme microcrystals at the newly established `multi-purpose spectroscopy/imaging instrument' of the SPring-8 Ångstrom Compact Free-Electron Laser (SACLA) at RIKEN Harima. Anomalous difference density maps calculated from these data demonstrate that serial femtosecond crystallography using a free-electron laser is sufficiently accurate to measure even the very weak anomalous signal of naturally occurring S atoms in a protein at a photon energy of 7.3 keV.

Imaging fully hydrated whole cells by coherent x-ray diffraction microscopy.

Nanoscale imaging of biological specimens in their native condition is of long-standing interest, in particular with direct, high resolution views of internal structures of intact specimens, though as yet progress has been limited. Here we introduce wet coherent x-ray diffraction microscopy capable of imaging fully hydrated and unstained biological specimens. Whole cell morphologies and internal structures better than 25 nm can be clearly visualized without contrast degradation.

Ambient temperature structure of phosphoketolase from Bifidobacterium longum determined by serial femtosecond X-ray crystallography.

Phosphoketolase and transketolase are thiamine diphosphate-dependent enzymes and play a central role in the primary metabolism of bifidobacteria: the bifid shunt. The enzymes both catalyze phosphorolytic cleavage of xylulose 5-phosphate or fructose 6-phosphate in the first reaction step, but possess different substrate specificity in the second reaction step, where phosphoketolase and transketolase utilize inorganic phosphate (Pi) and D-ribose 5-phosphate, respectively, as the acceptor substrate. Structures of Bifidobacterium longum phosphoketolase holoenzyme and its complex with a putative inhibitor, phosphoenolpyruvate, were determined at 2.5 Šresolution by serial femtosecond crystallography using an X-ray free-electron laser. In the complex structure, phosphoenolpyruvate was present at the entrance to the active-site pocket and plugged the channel to thiamine diphosphate. The phosphate-group position of phosphoenolpyruvate coincided well with those of xylulose 5-phosphate and fructose 6-phosphate in the structures of their complexes with transketolase. The most striking structural change was observed in a loop consisting of Gln546-Asp547-His548-Asn549 (the QN-loop) at the entrance to the active-site pocket. Contrary to the conformation of the QN-loop that partially covers the entrance to the active-site pocket (`closed form') in the known crystal structures, including the phosphoketolase holoenzyme and its complexes with reaction intermediates, the QN-loop in the current ambient structures showed a more compact conformation with a widened entrance to the active-site pocket (`open form'). In the phosphoketolase reaction, the `open form' QN-loop may play a role in providing the binding site for xylulose 5-phosphate or fructose 6-phosphate in the first step, and the `closed form' QN-loop may help confer specificity for Pi in the second step.

Purification, crystallization and preliminary X-ray diffraction studies of the ATP-binding subunit of an ABC transporter from Geobacillus kaustophilus.

ATP-binding cassette (ABC) transporters, also known as traffic ATPases, form a large family of integral membrane proteins responsible for the translocation of a variety of chemically diverse substrates across the lipid bilayers of cellular membranes of both prokaryotes and eukaryotes by the hydrolysis of ATP. The ATP-binding subunit of an ABC transporter from Geobacillus kaustophilus, a homodimeric enzyme, was overexpressed in Escherichia coli and purified. Crystals were obtained using the microbatch-under-oil method at 291 K. X-ray diffraction data to 1.6 Šresolution were collected on SPring-8 beamline BL26B1. The crystals belonged to the orthorhombic space group I222, with unit-cell parameters a=54.94, b=78.63, c=112.96 Å. Assuming the presence of a dimer in the asymmetric unit gave a crystal volume per protein weight (VM) of 2.32 Å3 Da(-1) and a solvent content of 47%; this was consistent with the results of a dynamic light-scattering experiment, which showed a dimeric state of the protein in solution. Molecular-replacement trials using the crystal structure of HisP from the Salmonella typhimurium ATP-binding subunit of an ABC transporter as a search model did not provide a satisfactory solution, indicating that the two ATP-binding subunits of ABC transporters have substantially different structures.

Nondestructive cellular-level 3D observation of mouse kidney using laboratory-based X-ray microscopy with paraffin-mediated contrast enhancement.

For three-dimensional observation of unstained bio-specimens using X-ray microscopy with computed tomography (CT), one main problem has been low contrast in X-ray absorption. Here we introduce paraffin-mediated contrast enhancement to visualize biopsy samples of mouse kidney using a laboratory-based X-tray microscope. Unlike conventional heavy-atom staining, paraffin-mediated contrast enhancement uses solid paraffin as a negative contrast medium to replace water in the sample. The medium replacement from water to paraffin effectively lowers the absorption of low-energy X-rays by the medium, which eventually enhances the absorption contrast between the medium and tissue. In this work, paraffin-mediated contrast enhancement with 8 keV laboratory X-rays was used to visualize cylindrical renal biopsies with diameters of about 0.5 mm. As a result, reconstructed CT images from 19.4 h of data collection achieved cellular-level resolutions in all directions, which provided 3D structures of renal corpuscles from a normal mouse and from a disease model mouse. These two structures with and without disease allowed a volumetric analysis showing substantial volume differences in glomerular subregions. Notably, this nondestructive method presents CT opacities reflecting elemental composition and density of unstained tissues, thereby allowing more unbiased interpretation on their biological structures.

Compact laboratory-based X-ray microscope enabling nondestructive 3D structure acquisition of mouse nephron with high speed and better user accessibility.

X-ray microscopes adopting computed tomography enable nondestructive 3D visualization of biological specimens at micron-level resolution without conventional 2D serial sectioning that is a destructive/laborious method and is routinely used for analyzing renal biopsy in clinical diagnosis of kidney diseases. Here we applied a compact commercial system of laboratory-based X-ray microscope to observe a resin-embedded osmium-stained 1-mm strip of a mouse kidney piece as a model of renal biopsy, toward a more efficient diagnosis of kidney diseases. A reconstructed computed tomography image from several hours of data collection using CCD detector allowed us to unambiguously segment a single nephron connected to a renal corpuscle, which was consistent with previous reports using serial sectioning. Histogram analysis on the segmented nephron confirmed that the proximal and distal tubules were distinguishable on the basis of their X-ray opacities. A 3D rendering model of the segmented nephron visualized a convoluted structure of renal tubules neighboring the renal corpuscle and a branched structure of efferent arterioles. Furthermore, another data collection using scientific complementary metal-oxide semiconductor detector with a much shorter data acquisition time of 15 min provided similar results from the same samples. These results suggest a potential application of the compact laboratory-based X-ray microscope to analyze mouse renal biopsy.

Development of an Outward Proton Pumping Rhodopsin with a New Record in Thermostability by Means of Amino Acid Mutations.

We have developed a methodology for identifying further thermostabilizing mutations for an intrinsically thermostable membrane protein. The methodology comprises the following steps: (1) identifying thermostabilizing single mutations (TSSMs) for residues in the transmembrane region using our physics-based method; (2) identifying TSSMs for residues in the extracellular and intracellular regions, which are in aqueous environment, using an empirical force field FoldX; and (3) combining the TSSMs identified in steps (1) and (2) to construct multiple mutations. The methodology is illustrated for thermophilic rhodopsin whose apparent midpoint temperature of thermal denaturation Tm is ∼91.8 °C. The TSSMs previously identified in step (1) were F90K, F90R, and Y91I with ΔTm ∼5.6, ∼5.5, and ∼2.9 °C, respectively, and those in step (2) were V79K, T114D, A115P, and A116E with ΔTm ∼2.7, ∼4.2, ∼2.6, and ∼2.3 °C, respectively (ΔTm denotes the increase in Tm). In this study, we construct triple and quadruple mutants, F90K+Y91I+T114D and F90K+Y91I+V79K+T114D. The values of ΔTm for these multiple mutants are ∼11.4 and ∼13.5 °C, respectively. Tm of the quadruple mutant (∼105.3 °C) establishes a new record in a class of outward proton pumping rhodopsins. It is higher than Tm of Rubrobacter xylanophilus rhodopsin (∼100.8 °C) that was the most thermostable in the class before this study.

Visualization of internal 3D structure of small live seed on germination by laboratory-based X-ray microscopy with phase contrast computed tomography.

BACKGROUND: The visualization of internal 3D-structure of tissues at micron resolutions without staining by contrast reagents is desirable in plant researches, and it can be achieved by an X-ray computed tomography (CT) with a phase-retrieval technique. Recently, a laboratory-based X-ray microscope adopting the phase contrast CT was developed as a powerful tool for the observation of weakly absorbing biological samples. Here we report the observation of unstained pansy seeds using the laboratory-based X-ray phase-contrast CT. RESULTS: A live pansy seed within 2 mm in size was simply mounted inside a plastic tube and irradiated by in-house X-rays to collect projection images using a laboratory-based X-ray microscope. The phase-retrieval technique was applied to enhance contrasts in the projection images. In addition to a dry seed, wet seeds on germination with the poorer contrasts were tried. The phase-retrieved tomograms from both the dry and the wet seeds revealed a cellular level of spatial resolutions that were enough to resolve cells in the seeds, and provided enough contrasts to delineate the boundary of embryos manually. The manual segmentation allowed a 3D rendering of embryos at three different stages in the germination, which visualized an overall morphological change of the embryo upon germination as well as a spatial arrangement of cells inside the embryo. CONCLUSIONS: Our results confirmed an availability of the laboratory-based X-ray phase-contrast CT for a 3D-structural study on the development of small seeds. The present method may provide a unique way to observe live plant tissues at micron resolutions without structural perturbations due to the sample preparation.

Structural and functional characterization of thermostable biocatalysts for the synthesis of 6-aminopurine nucleoside-5'-monophospate analogues.

The present work describes the functional and structural characterization of adenine phosphoribosyltransferase 2 from Thermus thermophilus HB8 (TtAPRT2). The combination of structural and substrate specificity data provided valuable information for immobilization studies. Dimeric TtAPRT2 was immobilized onto glutaraldehyde-activated MagReSyn®Amine magnetic iron oxide porous microparticles by two different strategies: a) an enzyme immobilization at pH 8.5 to encourage the immobilization process by N-termini (MTtAPRT2A, MTtAPRT2B, MTtAPRT2C) or b) an enzyme immobilization at pH 10.0 to encourage the immobilization process through surface exposed lysine residues (MTtAPRT2D, MTtAPRT2E, MTtAPRT2F). According to catalyst load experiments, MTtAPRT2B (activity: 480 IU g-1biocatalyst, activity recovery: 52%) and MTtAPRT2F (activity: 507 IU g-1biocatalyst, activity recovery: 44%) were chosen as optimal derivatives. The biochemical characterization studies demonstrated that immobilization process improved the thermostability of TtAPRT2. Moreover, the potential reusability of MTtAPRT2B and MTtAPRT2F was also tested. Finally, MTtAPRT2F was employed in the synthesis of nucleoside-5'-monophosphate analogues.

Structure of a haloacid dehalogenase superfamily phosphatase PH1421 from Pyrococcus horikoshii OT3: oligomeric state and thermoadaptation mechanism.

PH1421 from the hyperthermophilic archaeon Pyrococcus horikoshii OT3 is a hypothetical protein belonging to the haloacid dehalogenase (HAD) superfamily. To gain insight into its biological function and thermostabilization mechanism, the crystal structure of PH1421 has been determined at 1.6 A resolution. The crystallographic asymmetric unit contains a homodimer. The monomeric protomer is composed of two distinct domains, a small cap domain and a large core domain, which agrees well with the typical domain organization of HAD subfamily II. Based on structure-based amino-acid sequence alignment and enzymatic analysis, PH1421 is suggested to be a magnesium-dependent phosphatase that is similar to the dimeric HAD phosphatase TA0175 from the mesothermophilic archaeon Thermoplasma acidophilum. Further comparison between the crystal structures of PH1421 and TA0175 revealed a marked structural similarity in the interprotomer dimer association. The common dimer interface with interprotomer twofold symmetry is characterized by a well conserved hydrophobic core consisting of the beta1-alpha1 loop and helices alpha1 and alpha2 of the core domain and additional contacts including the beta7-beta8 loop of the cap domain, which constitutes part of the putative active site of the enzyme. Several factors that potentially contribute to the higher thermal stability of PH1421 were identified: (i) an increase in intraprotomer hydrophobic interactions, (ii) a decrease in denaturation entropy from amino-acid composition and (iii) an increased number of intraprotomer ion pairs. These results suggest that the PH1421 protomer itself has an intrinsically higher thermal stability when compared with the mesothermophilic orthologue TA0175.

Systematic study on crystal-contact engineering of diphthine synthase: influence of mutations at crystal-packing regions on X-ray diffraction quality.

It is well known that protein crystallizability can be influenced by site-directed mutagenesis of residues on the molecular surface of proteins, indicating that the intermolecular interactions in crystal-packing regions may play a crucial role in the structural regularity at atomic resolution of protein crystals. Here, a systematic examination was made of the improvement in the diffraction resolution of protein crystals on introducing a single mutation of a crystal-packing residue in order to provide more favourable packing interactions, using diphthine synthase from Pyrococcus horikoshii OT3 as a model system. All of a total of 21 designed mutants at 13 different crystal-packing residues yielded almost isomorphous crystals from the same crystallization conditions as those used for the wild-type crystals, which diffracted X-rays to 2.1 A resolution. Of the 21 mutants, eight provided crystals with an improved resolution of 1.8 A or better. Thus, it has been clarified that crystal quality can be improved by introducing a suitable single mutation of a crystal-packing residue. In the improved crystals, more intimate crystal-packing interactions than those in the wild-type crystal are observed. Notably, the mutants K49R and T146R yielded crystals with outstandingly improved resolutions of 1.5 and 1.6 A, respectively, in which a large-scale rearrangement of packing interactions was unexpectedly observed despite the retention of the same isomorphous crystal form. In contrast, the mutants that provided results that were in good agreement with the designed putative structures tended to achieve only moderate improvements in resolution of up to 1.75 A. These results suggest a difficulty in the rational prediction of highly effective mutations in crystal engineering.

Crystal structures of shikimate dehydrogenase AroE from Thermus thermophilus HB8 and its cofactor and substrate complexes: insights into the enzymatic mechanism.

Shikimate dehydrogenase (EC 1.1.1.25) catalyses the fourth step of the shikimate pathway which is required for the synthesis of the aromatic amino acids and other aromatic compounds in bacteria, microbial eukaryotes, and plants. The crystal structures of the shikimate dehydrogenase AroE from Thermus thermophilus HB8 in its ligand-free form, binary complexes with cofactor NADP+ or substrate shikimate, and the ternary complex with both NADP(H) and shikimate were determined by X-ray diffraction method at atomic resolutions. The crystals are nearly isomorphous with the asymmetric unit containing a dimer, each subunit of which has a bi-domain structure of compact alpha/beta sandwich folds. The two subunits of the enzyme display asymmetry in the crystals due to different relative orientations between the N- and C-terminal domains resulting in a slightly different closure of the interdomain clefts. NADP(H) is bound to the more closed form only. This closed conformation with apparent higher affinity to the cofactor is also observed in the unliganded crystal form, indicating that the NADP(H) binding to TtAroE may follow the selection mode where the cofactor binds to the subunit that happens to be in the closed conformation in solution. Crystal structures of the closed subunits with and without NADP(H) show no significant structural difference, suggesting that the cofactor binding to the closed subunit corresponds to the lock-and-key model in TtAroE. On the other hand, shikimate binds to both open and closed subunit conformers of both apo and NADP(H)-liganded holo enzyme forms. The ternary complex TtAroE:NADP(H):shikimate allows unambiguous visualization of the SDH permitting elucidation of the roles of conserved residues Lys64 and Asp100 in the hydride ion transfer between NADP(H) and shikimate.