Efficient Near-Infrared Luminescence of Self-Assembled Platinum(II) Complexes: From Fundamentals to Applications.

ConspectusDesigning bright and efficient near-infrared (NIR) emitters has drawn much attention due to numerous applications ranging from biological imaging, medical therapy, optical communication, and night-vision devices. However, polyatomic organic and organometallic molecules with energy gaps close to the deep red and NIR regime are subject to dominant nonradiative internal conversion (IC) processes, which drastically reduces the emission intensity and exciton diffusion length of organic materials and hence hampers the optoelectronic performances. To suppress nonradiative IC rates, we suggested two complementary approaches to solve the issues: exciton delocalization and molecular deuteration. First, exciton delocalization efficiently suppresses the molecular reorganization energy through partitioning to all aggregated molecules. According to the IC theory together with the effect of exciton delocalization, the simulated nonradiative rates with the energy gap ΔE = 104 cm-1 decrease by around 104 fold when the exciton delocalization length equals 5 (promoting vibronic frequency ωl = 1500 cm-1). Second, molecular deuterations reduce Franck-Condon vibrational overlaps and vibrational frequencies of promoting modes, which decreases IC rates by 1 order of magnitude in comparison to the rates of nondeuterated molecules under ΔE of 104 cm-1. Although deuteration of molecules has long been attempted to increase emission intensity, the results have been mixed. Here, we provide a robust derivation of the IC theory to demonstrate its validity, especially to emission in the NIR region.The concepts are experimentally verified by the strategic design and synthesis of a class of square-planar Pt(II) complexes, which form crystalline aggregates in vapor deposited thin films. The packing geometries are well characterized by the grazing angle X-ray diffraction (GIXD), showing domino-like packing arrangements with the short ππ separation of 3.4-3.7 Å. Upon photoexcitation, such closely packed assemblies exhibit intense NIR emission maximized in the 740-970 nm region through metal-metal-to-ligand charge transfer (MMLCT) transition with unprecedented photoluminescent quantum yield (PLQY) of 8-82%. To validate the existence of exciton delocalization, we applied time-resolved step-scan Fourier transform UV-vis spectroscopy to probe the exciton delocalization length of Pt(II) aggregates, which is 5-9 molecules (2.1-4.5 nm) assuming that excitons mainly delocalized along the direction of ππ stacking. According to the dependence of delocalization length vs simulated IC rates, we verify that the observed delocalization lengths contribute to the high NIR PLQY of the aggregated Pt(II) complexes. To probe the isotope effect, both partially and completely deuterated Pt(II) complexes were synthesized. For the case of the 970 nm Pt(II) emitter, the vapor deposited films of per-deuterated Pt(II) complexes exhibit the same emission peak as that of the nondeuterated one, whereas PLQY increases ∼50%. To put the fundamental studies into practice, organic light-emitting diodes (OLEDs) were fabricated with a variety of NIR Pt(II) complexes as the emitting layer, showing the outstanding external quantum efficiencies (EQEs) of 2-25% and the remarkable radiances 10-40 W sr-1 m-2 at 740-1002 nm. The prominent device performances not only successfully prove our designed concept but also reach a new milestone for highly efficient NIR OLED devices.This Account thus summarizes our approaches about how to boost the efficiency of the NIR emission of organic molecules from an in-depth fundamental basis, i.e., molecular design, photophysical characterization, and device fabrication. The concept of the exciton delocalization and molecular deuteration may also be applicable to a single molecular system to achieve efficient NIR radiance, which is worth further investigation in the future.

Effects of Deuterium Isotopes on Pt(II) Complexes and Their Impact on Organic NIR Emitters.

Insight into effect of deuterium isotopes on organic near-IR (NIR) emitters was explored by the use of self-assembled Pt(II) complexes H-3-f and HPh-3-f, and their deuterated analogues D-3-f and DPh-3-f, respectively (Scheme 2). In vacuum deposited thin film, albeit having nearly identical emission spectral feature maximized at ~810 nm, H-3-f and D-3-f exhibit remarkable difference in photoluminescence quantum yield (PLQY) of 29 % and 50 %, respectively. Distinction in PLQY is also observed for HPh-3-f (800 nm, 50 %) and DPh-3-f (798 nm, 67 %). We then elucidated the theoretical differences in the impact on near-infrared (NIR) luminescence between Pt(II) complexes and organic small molecules upon deuteration. The results establish a general guideline for the deuteration on NIR emission efficiency. From a perspective of practical application, NIR OLEDs based on D-3-f and DPh-3-f emitters attain EQEmax of 15.5 % (radiance 31,287 mW Sr-1 m-2 ) and 16.6 % (radiance of 32,279 mW Sr-1 m-2 ) at 764 nm and 796 nm, respectively, both of which set new records for NIR OLEDs of >750 nm.

Tuning Electrochemical Stability of 5,10-Ditolylphenazine-Based Antiaromatic Materials for Unipolar Memristor toward Artificial Synapses Application.

Three organic conjugated small molecules, DTA-DTPZ, Cz-DTPZ, and DTA-me-DTPZ comprising an antiaromatic 5,10-ditolylphenazine (DTPZ) core and electron-donating peripheral substituents with high HOMOs (-4.2 to -4.7 eV) and multiple reversible oxidative potentials are reported. The corresponding films sandwiched between two electrodes show unipolar and switchable hysteresis current-voltage (I-V) characteristics upon voltage sweeping, revealing the prominent features of nonvolatile memristor behaviors. The numerical simulation of the I-V curves suggests that the carriers generated by the oxidized molecules lead to the increment of conductance. However, the accumulated carriers tend to deteriorate the device endurance. The electroactive sites are fully blocked in the dimethylated molecule DTA-me-DTPZ, preventing the irreversible electrochemical reaction, thereby boosting the endurance of the memristor device over 300 cycles. Despite the considerable improvement in endurance, the decrement of on/off ratio from 105 to 101 after 250 cycles suggests that the excessive charge carriers (radical cations) remains a problem. Thus, a new strategy of doping an electron-deficient material, CN-T2T, into the unipolar active layer was introduced to further improve the device stability. The device containing DTA-me-DTPZ:CNT2T (1:1) blend as the active layer retained the endurance and on/off ratio (∼104) upon sweeping 300 cycles. The molecular designs and doping strategy demonstrate effective approaches toward more stable metal-free organic conjugated small-molecule memristors.

Harnessing 2D Ruddlesden-Popper Perovskite with Polar Organic Cation for Ultrasensitive Multibit Nonvolatile Transistor-Type Photomemristors.

Photomemristors have been regarded as one of the most promising candidates for next-generation hardware-based neuromorphic computing due to their potentials of fast data transmission and low power consumption. However, intriguingly, so far, photomemristors seldom display truly nonvolatile memory characteristics with high light sensitivity. Herein, we demonstrate ultrasensitive photomemristors utilizing two-dimensional (2D) Ruddlesden-Popper (RP) perovskites with a highly polar donor-acceptor-type push-pull organic cation, 4-(5-(2-aminoethyl)thiophen-2-yl)benzonitrile+ (EATPCN+), as charge-trapping layers. High linearity and almost zero-decay retention are observed in (EATPCN)2PbI4 devices, which are very distinct from that of the traditional 2D RP perovskite devices consisting of nonpolar organic cations, such as phenethylamine+ (PEA+) and octylamine+ (OA+), and traditional 3D perovskite devices consisting of methylamine+ (MA+). The 2-fold advantages, including desirable spatial crystal arrangement and engineered energetic band alignment, clarify the mechanism of superior performance in (EATPCN)2PbI4 devices. The optimized (EATPCN)2PbI4 photomemristor also shows a memory window of 87.9 V and an on/off ratio of 106 with a retention time of at least 2.4 × 105 s and remains unchanged after >105 writing-reading-erasing-reading endurance cycles. Very low energy consumptions of 1.12 and 6 fJ for both light stimulation and the reading process of each status update are also demonstrated. The extremely low power consumption and high photoresponsivity were simultaneously achieved. The high photosensitivity surpasses that of a state-of-the-art commercial pulse energy meter by several orders of magnitude. With their outstanding linearity and retention, rabbit images have been rebuilt by (EATPCN)2PbI4 photomemristors, which truthfully render the image without fading over time. Finally, by utilizing the powerful ∼8 bits of nonvolatile potentiation and depression levels of (EATPCN)2PbI4 photomemristors, the accuracies of the recognition tasks of CIFAR-10 image classification and MNIST handwritten digit classification have reached 89% and 94.8%, respectively. This study represents the first report of utilizing a functional donor-acceptor type of organic cation in 2D RP perovskites for high-performance photomemristors with characteristics that are not found in current halide perovskites.

A New Dioxasilepine-Aryldiamine Hybrid Electron-Blocking Material for Wide Linear Dynamic Range and Fast Response Organic Photodetector.

A new dioxasilepine and aryldiamine hybrid material DPSi-DBDTA is designed to act as the electron-blocking layer (EBL) for vacuum-processed organic photodetector (OPD). The O-Si-O-linked cyclic structure leads DPSi-DBDTA to have dipolar character, high LUMO, and good thermal and morphology stability suitable for vacuum deposition. An initial trial with C60-based single active layer OPD device manifests the superior capability of DPSi-DBDTA for dark current suppression compared to the typical aryldiamines. Here, the bare and MoO3-doped DPSi-DBDTA is further examined as EBLs for the visible light responsive OPD comprising DTDCPB/C70 bulk heterojunction (BHJ) as the active layer. In sync with the result of C60-based OPD, the low dark current density and high specific detectivity D* (7.085 × 1012 cm Hz1/2 W-1) are achieved. The device with 5% MoO3-doped EBL can exhibit a wide linear dynamic range (LDR) up to 154.166 dB, which is attributed to suppression of both dark current density and carrier recombination. Additionally, the devices also manifest fast time-resolved performance in both frequency and transient response measurements. Especially for the device with 20% MoO3-doped EBL, a wide cutoff frequency response 692.047 kHz and record-high transient response demonstrating ≤0.683 µs for transient photovoltage (TPV) and ≤0.478 µs for transient photocurrent (TPC) have been realized, which is possibly owing to the balance of mobility that mitigates the damage from traps. Such submicrosecond response is comparable with the state-of-the-art perovskite-PDs and Si-PDs.

Left ventricular myocardium segmentation on arterial phase of multi-detector row computed tomography.

RATIONALE AND OBJECTIVES: Variation of left ventricular myocardial volumes correlates closely with ischemic heart diseases. In clinical practice, because physicians and radiologists rely much on myocardial contour to diagnose many different cardiac diseases, automatic segmentation of left ventricular myocardium and quantifying myocardium characteristics is clinically beneficial. This paper presents a hybrid segmentation method for left ventricular myocardium on arterial phase of multi-detector row computed tomography (MDCT) imaging. MATERIALS AND METHODS: The proposed method utilizes an intensity transformation equation as a preprocessing procedure to enhance contrast and reduce noise in MDCT imaging. By setting the centroid of left ventricle (LV) as an initial seed, the conventional region growing method is employed to identify the endocardial contour of LV cavity for each slice. Then the level-set method (LSM) utilizes the extracted endocardial contour as initial contour to delineate the epicardium of LV. The two extracted contours are integrated to form the region of interest (ROI) of the LV. Finally, the ROIs from all slices are combined to obtain the volume of the whole LV myocardium. RESULTS: Twenty-two healthy patients who had no symptoms of ischemic heart disease are applied to evaluate the performance of the proposed method. Compared with manual contours delineated by two experienced experts, the contouring results from computer simulation reveal that the proposed method always identifies similar contours as that obtained by the manual sketching. CONCLUSION: The proposed method provides a robust and fast automatic contouring for LV myocardium on arterial phase of MDCT. The potential role of this technique may save much of the time required to manually sketch a precise contour with high stability.