Effect of Static Jahn-Teller Distortion on the Li+ Transport in a Copper Hexacyanoferrate Framework.

Prussian blue (PB) and its analogues (PBAs) are potential cathode-active materials for rechargeable lithium-ion batteries. Although a body of research has assessed the performances of various PB/PBA cathodes with an eye to practical use, the underlying Li+-transport mechanism is still unclear. Focusing on copper hexacyanoferrate (CuHCF), a PBA that exhibits static Jahn-Teller (JT) distortion, we theoretically investigate how the framework's distortion affects the pathways and energetics of the Li+ transport. Density functional theory calculations of a local structure model of CuHCF reveal that the static JT distortion makes the favorable Li+-transport pathways quasi-two-dimensional, contrary to an intuitive picture of isotropic Li+ diffusion within the regular jungle-gym framework. The pathways are mutually interconnected, thereby creating an almost barrierless transport network. To better understand the distortion-induced transport anisotropy, we visually analyze the framework's electronic structure and noncovalent Li+-framework interactions. This study helps deepen the fundamental understanding of intrinsic Li+-transport properties of a distorted porous framework.

A solvent-compatible filter-transfer method of semi-transparent carbon-nanotube electrodes stacked with silver nanowires.

Low-density films of single-walled carbon nanotubes (SWNTs) can be used as a semi-transparent top electrode for all-solution-processed film devices; however, their semiconductor characteristics vary depending on the experimental factors in their dispersion into solvents, and the sublayers are damaged as a result of solvent incompatibility. In this study, we report a solvent-compatible filter-transfer method for SWNT films stacked with silver nanowires (AgNWs), and evaluate the semiconductor characteristics through the p/n heterojunction with a Si wafer (SWNT/Si). AgNWs and SWNTs were successively filtered through their aqueous dispersion solutions using a membrane filter. The stacked semi-transparent films (AgNW/SWNT films with controlled densities) were successfully transferred onto glass plates and Si wafers. The transmittance at 550 nm revealed a window between 60% and 80% with a narrow sheet resistance range between 11 and 23 Ω â–¡-1. The power conversion efficiency (PCE) of SWNT/Si was improved to 11.2% in a junction area of 0.031 cm2 through the use of spin-coated Nafion resins; however, the accumulated resistance of SWNTs drastically reduced the PCE to 2% as the area increased to ≥0.5 cm2. AgNWs maintained the PCE within a range of 10.7% to 8.6% for an area ranging from 0.031 cm2 to 1.13 cm2. All of the photovoltaic parameters were dependent on the junction areas, suggesting that AgNWs function as an effective current-collector layer on the semiconductor layer of SWNTs without direct contact of AgNWs with the Si surface. In addition, we report a solvent-compatible experiment for transferring AgNW/SWNT films onto a solvent-sensitive perovskite material (CH3NH3PbI3).

Microvascular Decompression for Glossopharyngeal Neuralgia in the Semi-Sitting Position: A Report of Two Cases.

The semi-sitting position is well known to neurosurgeons. However, there are few reports of microvascular decompression surgery for glossopharyngeal neuralgia performed using the semi-sitting position. The semi-sitting position is not widely adopted in Japan, but it is considered to be a very useful neurosurgical position. Microvascular decompression surgery for glossopharyngeal neuralgia is a relatively rare procedure, and the semi-sitting position is very effective, considering the possibility of intraoperative cardiac arrest and postoperative complications of lower cranial nerve palsy. This report describes two cases of glossopharyngeal neuralgia operated in the semi-sitting position. Microvascular decompression was performed on both patients, and postoperative pain controls were good and no complications were observed. We show that the use of the semi-sitting position to perform microvascular decompression for glossopharyngeal neuralgia provides an excellent surgical view of the brainstem.

Investigation of the Image Contrast in an Ultra-Low Voltage Scanning Electron Microscope Using an Auger Electron Spectrometer.

Surface-sensitive information on a bulk sample can be obtained by using a low incident electron energy (low accelerating voltage/landing voltage) in a scanning electron microscope (SEM). However, topography and composition contrast obtained at low incident electron energies may not be intuitive and should be analyzed carefully. By combining an Auger electron spectrometer (AES) with a low incident electron energy SEM (LE-SEM), we investigated the SEM contrast carefully by separating the secondary electron (SE) and back-scattered electron (BSE) components with high accuracy. For this, we modified an AES to measure the electron energy in the range of 0­0.6 keV with a sample bias voltage of 0 to −0.3 keV. We could clearly observe reversed brightness of gold and carbon (graphite) in BSE images when the energy of the incident electrons was reduced to 0.2­0.3 keV. In addition, reflected electron energy spectroscopy (REELS) is known to be a tool for chemical state analysis of the sample. We demonstrated that it is possible to study the electron states of graphite, diamond, and graphene by acquiring low incident energy REELS spectra from their surfaces with the newly modified AES. This will be a new method for analyzing the electron states of local areas of a surface.

Interpretation of the Role of Composition on the Inclusion Efficiency of Monovalent Cations into Cobalt Hexacyanoferrate.

Cobalt hexacyanoferrate of various compositions was prepared in flow mode and the role of the vacancy on the structure, thermogravimetric (TG) properties, and the adsorption efficiency was studied. The material, Nay Co[Fe(CN)6 ]1-x ⋅z H2 O, with a minimum vacancy of x=0.014 to the highest x=0.47, was obtained. The TG-differential scanning calorimetry (DSC) profile showed a distinct influence of the vacancy on the water release temperature. Materials with x>0.35 showed a smooth release of water at a relatively lower temperature. However, for the materials with x<0.35, water release took place in multiple steps, suggesting the existence of various forms of water. The FTIR profiles supported the existence of free and bonded water molecules. However, the materials with multiple water peaks in the FTIR spectra showed a shift of the major XRD peaks when heated at 285 °C in N2 atmosphere. Regarding the effect of the vacancy on the adsorption behavior, for NH4 , the adsorption was found to be proportional to the number of Na atoms in the material, confirming the ion-exchange process. On the contrary, the materials with low vacancy and high Na content showed nominal Cs adsorption capacity. Interestingly, the K adsorption capacity was found to be in between that of the other two ions. This means the ionic size decides the rate of placement into the interstitial sites. For larger ions like Cs, the ease of percolation via the vacancy decides the overall adsorption efficiency.

Ferrihydrite Particle Encapsulated within a Molecular Organic Cage.

Metal oxides with sizes of a few nanometers show variable crystal and electronic structures depending on their dimensions, and the synthesis of metal oxide particles with a desired size is a key technology in materials science. Although discrete metal oxide particles with an average diameter ( d) smaller than 2 nm are expected to show size-specific properties, such ultrasmall metal oxide particles are significantly limited in number. In nature, on the other hand, nanosized ferrihydrite (Fh), which is ferric oxyhydroxide, occurs as a result of biomineralization in ferritin, an iron storage protein cage. Here we describe the synthesis of Fh particles using a covalent molecular organic cage (MOC) derived from 8 + 12 cyclocondensation of triaminocyclohexane with a diformylphenol derivative. At the initial reaction stage, eight iron ions accumulated at the metal binding sites in the cage cavity, and Fh particles ( d = 1.9 ± 0.3 nm) encapsulated within the cage (Fh@MOC) formed with a quite narrow size distribution. The formation process of the Fh particle in the organic cage resembles the biomineralization process in the natural iron storage protein, and the present method could be applicable to the synthesis of other metal oxide particles. Fh@MOC is soluble in common organic solvents and shows substantial redox activity in MeCN.

Wisely Designed Phthalocyanine Derivative for Convenient Molecular Fabrication on a Substrate.

An axial-substituted silicon phthalocyanine derivative, SiPc(OR)2 (R = C4H9), that is soluble in organic solvent is conveniently synthesized. This silicon phthalocyanine derivative reacts with a hydroxyl group on a substrate and then with another phthalocyanine derivative under mild conditions. The accumulation number of the phthalocyanine molecules on the substrates is easily controlled by the immersion time. On the basis of AFM (atomic force microscopy) images, the surface of the phthalocyanine-modified glass substrate has uneven structures on the nanometer scale. ITO electrodes modified with the composition of the phthalocyanine derivative and PCBM show stable cathodic photocurrent generation upon light irradiation.

Improvement of the Heat Resistance of Prussian Blue Nanoparticles in a Clay Film Composed of Smectite Clay and ε-Caprolactam.

Prussian blue (PB) is limited in its application by its breakdown at elevated temperatures. To improve the heat resistance of PB, we prepared a composite film comprising PB nanoparticles (NPs), smectite clay, and an organic compound. The composite film had a microstructure in which PB NPs were intercalated between smectite/organic compound layers. The predominant oxidation temperature of the PB NPs in the composite film was around 500 °C in air, higher than the oxidation temperature of bulk PB in air (250 °C). This improvement in the oxidation temperature may be due to the composite film acting as a barrier to oxygen gas. These results indicate the effectiveness of clay materials for the improvement of heat resistance for low-temperature decomposition compounds, not only PB but also other porous coordination polymers.

Dual-Functional Surfactant-Templated Strategy for Synthesis of an In Situ N2 -Intercalated Mesoporous WO3 Photoanode for Efficient Visible-Light-Driven Water Oxidation.

N2 -Intercalated crystalline mesoporous tungsten trioxide (WO3 ) was synthesized by a thermal decomposition technique with dodecylamine (DDA) as a surfactant template with a dual role as an N-atom source for N2 intercalation, alongside its conventional structure-directing role (by micelle formation) to induce a mesoporous structure. N2 physisorption analysis showed that the specific surface area (57.3 m2 g-1 ) of WO3 templated with DDA (WO3 -DDA) is 2.3 times higher than that of 24.5 m2 g-1 for WO3 prepared without DDA (WO3 -bulk), due to the mesoporous structure of WO3 -DDA. The Raman and X-ray photoelectron spectra of WO3 -DDA indicated intercalation of N2 into the WO3 lattice above 450 °C. The UV/Vis diffuse-reflectance spectra exhibited a significant shift of the absorption edge by 28 nm, from 459 nm (2.70 eV) to 487 nm (2.54 eV), due to N2 intercalation. This could be explained by the bandgap narrowing of WO3 -DDA by formation of a new intermediate N 2p orbital between the conduction and valance bands of WO3 . A WO3 -DDA-coated indium tin oxide (ITO) electrode calcined at 450 °C generated a photoanodic current under visible-light irradiation below 490 nm due to photoelectrochemical water oxidation, as opposed to below 470 nm for ITO/WO3 -bulk. The incident photon-to-current conversion efficiency (IPCE=24.5 %) at 420 nm and 0.5 V versus Ag/AgCl was higher than that of 2.5 % for ITO/WO3 -bulk by one order of magnitude due to N2 intercalation and the mesoporous structure of WO3 -DDA.

Grain-Boundary-Free Super-Proton Conduction of a Solution-Processed Prussian-Blue Nanoparticle Film.

A porous crystal family has been explored as alternatives of Nafion films exhibiting super-proton conductivities of ≥10-2  S cm-1 . Here, the proton-conduction natures of a solution-processed film of nanoparticles (NPs) have been studied and compared to those of a Nafion film. A mono-particle film of Prussian-blue NPs is spontaneously formed on a self-assembled monolayer substrate by a one-step solution process. A low-temperature heating process of the densely packed, pinhole-free mono-particle NP film enables a maximum 105 -fold enhancement of proton conductivity, reaching ca. 10-1  S cm-1 . The apparent highest conductivity, compared to previously reported data of the porous crystal family, remains constant against humidity changes by an improved water-retention ability of the film. In our proposed mechanism, the high-performing solution-processed NP film suggests that heating leads to the self-restoration of hydrogen-bonding networks throughout their innumerable grain boundaries.

Plasmon-assisted photocurrent generation from silver nanoparticle monolayers combined with porphyrins via their different chain-length alkylcarboxylates.

Three-typed porphyrin derivatives with a different chain-length alkylcarboxylic acid as their peripheral anchor group have been prepared. Anodic photocurrents were observed in a simple system where the porphyrin derivatives were directly anchored on an indium tin oxide (ITO) electrode. Cathodic photocurrents and their plasmon-assisted enhancement appeared from an Ag nanoparticle (Ag NP) composite monolayer combined with the porphyrin derivatives on the ITO electrode. In the photocurrent generation mechanism, Ag NPs played both the roles as photon- and energy-transfer to the porphyrin derivatives. The plasmon-assisted enhancement was affected by the chain-lengths of the peripheral anchor groups.

[Effect of landiolol hydrochloride for intraoperative tachycardia--multicenter questionnaire study].

BACKGROUND: The purpose of this study was to evaluate effects of landiolol hydrochloride, which is an ultra-short-acting beta-1 selective blocker, for intraoperative tachycardia and to establish practical methods of administration of the drug. METHODS: We retrospectively examined by multicenter questionnaires the effects and practical methods of administration of landiolol for 100 patients who showed tachycardia needing treatment during anesthesia. The techniques for anesthesia and administration of landiolol were entrusted to each anesthesiologist. RESULTS: One case was excluded because the dose of landiolol hydrochloride was uncertain. Fifty-nine patients received an intravenous bolus injection of landiolol, and continuous injection was performed in 34 patients. Six patients had both bolus and continuous injections. In the 99 patients, heart rate was significantly reduced to desired levels. The time required to reduce heart rate by more than 10% after injection was shorter in the bolus group than in the continuous group. Bolus injection, however, did not reduce blood pressure. Although low-dose continuous administration significantly reduced blood pressure, treatment for increasing blood pressure was not needed in any of the patients. CONCLUSIONS: Information obtained by the questionnaire suggests that bolus injection and/or low-dose continuous administration of landiolol, which are not described in the drug information documents, are effective and safe for treatment of tachycardia during anesthesia.

Self-Assembly and -Cross-Linking Lamellar Films by Nanophase Separation with Solvent-Induced Anisotropic Structural Changes.

In this study, we have prepared thermally and chemically stable lamellar polymer films via humid annealing. The amphiphilic polymer poly(N-dodecyl acrylamide-stat-3-(trimethoxysilyl)propyl acrylate) [p(DDA/TMSPA)] forms a self-assembled lamellar structure via annealing at 60 °C under 98% relative humidity (humid annealing) due to nanophase separation between the hydrophobic dodecyl side and main chains with the amide groups that contain adsorbed water. Moreover, a self-cross-linking reaction of TMSPA proceeds during the humid annealing. As a result, the lamellar films maintain their structure even when annealed above their glass-transition temperature. On the other hand, the films swell when immersed in toluene. The highly ordered lamellar structure collapses due to the swelling but can be re-established by subsequent humid annealing. A multilayer freestanding film can be exfoliated via sonication in toluene. The exfoliated multilayer films initially form a dome-shaped structure, which is converted to a plate-shaped structure upon humid annealing. In their entirety, these results reveal that the molecular-scale movement associated with the formation of the lamellar structure induces a macroscopic structural change. Consequently, p(DDA/TMSPA) can be considered as a new stimulus-responsive polymer.

Size-tunable synthesis of iron oxide nanocrystals by continuous seed-mediated growth: role of alkylamine species in the stepwise thermal decomposition of iron(II) oxalate.

The properties of inorganic nanoparticles (NPs) are governed by their size. Therefore, tuning the size of NPs is a fundamental technique in nanoscience. However, the size-tunable synthesis of inorganic NPs is generally carried out in a dilute solution, which produces large quantities of waste. Herein, we report the predictable size-tunable synthesis of Fe3O4 NPs by the stepwise thermal decomposition of iron(II) oxalate (Fe(ox)). Monodisperse Fe3O4 seed crystals were synthesized by the thermal decomposition of oleylamine-coordinated iron oxalate (Fe(ox)-OAm) in a small amount of oleylamine, followed by continuous seed-mediated growth of Fe3O4 NPs. The thermal decomposition behavior of Fe(ox) in oleylamine with and without N,N-diethyl-1,3-diaminopropane (dedap) revealed the important role of dedap in the stepwise thermal decomposition of Fe(ox). The size of the Fe3O4 NPs was easily tuned via the stepwise thermal decomposition of Fe(ox) by controlling the amount of decomposed Fe(ox) in a small amount of an alkylamine mixture. The particle diameter was predicted from the size of the Fe3O4 seed crystals and the amount of decomposed Fe(ox). Finally, the size dependency of magnetic properties of the synthesized Fe3O4 NPs was studied. This continuous seed-mediated growth method based on the stepwise thermal decomposition of metal oxalate can be applied to control the size of a variety of metal and metal oxide NPs.

Estimation of the head elevation angle that causes clinically important venous air embolism in a semi-sitting position for neurosurgery: a retrospective observational study.

INTRODUCTION: The benefits of a sitting position for neurosurgery involving the posterior fossa remain controversial. The main concern is the risk of venous air embolism (VAE). A recent study showed that the rate of VAE was higher when the head was elevated to 45° than when it was elevated to 30°. However, the degree of head elevation that causes clinically important VAE is unclear. The purpose of this study was to estimate the head elevation angle at which the probability of VAE is 50% by using EtCO2 monitoring to detect of VAE. METHODS: The anesthesia records of 23 patients who underwent neurosurgery in a sitting position were reviewed retrospectively. Intraoperative ventilation was set to maintain EtCO2 at approximately 38-42 mmHg. The head elevation angle in each case was determined from a photograph taken by the anesthesiologist or brain surgeon. Nineteen of the 23 cases had photographs available that contained a horizontal reference in the background. Seven cases were treated as VAE during the operation. Six of these cases met the criteria for VAE in this study. Data analysis was performed on a total of 18 patients. The angle between the line connecting the hip joint and the shoulder joint and the horizontal reference was obtained by ImageJ software. Logistic regression was performed using the Python programming language to determine the head elevation angle at which the probability of air embolism was 50%. RESULTS: The decision boundary in the logistic regression was 35.7°. This head elevation angle was the boundary where the probability of VAE was 50%. CONCLUSION: The angle of head elevation that caused clinically important VAE was estimated to be 35.7°.

An exclusive deposition method of silver nanoparticles on TiO2 particles via low-temperature decomposition of silver-alkyldiamine complexes in aqueous media.

An exclusive deposition method of Ag nanoparticles (NPs) on TiO2 particles has been developed. Ag NPs supported on TiO2 particles, Ag x /TiO2, with various Ag weight ratios versus total weights of Ag and TiO2 between x = 2 and 16 wt% are prepared via low-temperature thermal decomposition of Ag(i)-alkyldiamine complexes generated by a reaction between AgNO3 and N,N-dimethyl-1,3-propanediamine (dmpda) in an aqueous medium suspending TiO2 particles. The thermal decomposition of the Ag(i)-alkyldiamine complexes is accelerated by TiO2 particles in the dark, indicating that the reaction catalytically occurs on the TiO2 surfaces. Under optimised reaction conditions, the thermal decomposition of the complex precursors is completed within 3 hours at 70 °C, and Ag NPs are almost exclusively deposited on TiO2 particles with high conversion efficiencies (≥95%) of the precursor complexes. The thermal decomposition rates of the precursor complexes are strongly influenced by the chemical structure of a family of water-soluble dmpda analogues, and dmpda with both primary and tertiary amino groups is adopted as a suitable candidate for the exclusive deposition method. The number-averaged particle sizes of the Ag NPs are 6.4, 8.4, 11.8 and 15.2 nm in the cases of Ag x /TiO2, x = 2, 4, 8 and 16, respectively. To the best of our knowledge, the as-prepared Ag x /TiO2 samples show one of the highest catalytic abilities for the hydrogenation reduction of 4-nitrophenol into 4-aminophenol as a model reaction catalysed by Ag NPs.

Ion transportation by Prussian blue nanoparticles embedded in a giant liposome.

A new type of artificial giant liposome incorporating ion transport channels and using nanoparticles of metal organic frameworks was demonstrated. The micropores of Prussian blue nanoparticles served as ion transport channels between the outer and inner phases of liposomes.

Electrochemical control of the elution property of Prussian blue nanoparticle thin films: mechanism and applications.

We found a method for controlling the elution property of a thin film of water-dispersible Prussian blue (w-PB) nanoparticles using a simple electrochemical treatment. The thin film of the w-PB nanoparticles fabricated by the spin-coating method was unstable in water and eluted easily. However, after electrochemical reduction and oxidation, the film did not elute in water. To clarify the mechanism, we investigated films using ultraviolet-visible absorption spectroscopy, X-ray photoemission spectroscopy, and atomic force microscopy. We propose herein that the change in the elution property occurs because of alkali cation exchange from Na(+) to K(+). We also demonstrated that this elution-control technique is effective for the fabrication of w-PB nanoparticle nanostructures such as multilayered thin films.

Direct transformation into silver nanoparticles via thermal decomposition of oxalate-bridging silver oleylamine complexes.

Silver(I) oxalate, Ag2(C2O4), reacts with two equivalents of oleylamine (Ag:oleylamine = 1:1 mole/mole) to form an oxalate-bridged silver-oleylamine complex, [(oleylamine)Ag(micro-C2O4)Ag(oleylamine)]. The precursor complex is thermally decomposed at approximately 150 degrees C with CO2 evolution to produce Ag nanoparticles with approximately 11 nm dimension. The Ag nanoparticles contain approximately 12 wt% of oleylamines as the surface stabilizer. In the synthetic mechanism, the oxalate ligand acts as a two-electron reducing agent. The precursor complex is directly transformed into oleylamine-stabilized Ag nanoparticles in high yields of more than 80% without any additional synthetic organic solvents and reducing agents.

Preparation of Hierarchically Assembled Silver Nanostructures based on the Morphologies of Crystalline Peptide-Silver(I) Complexes.

The preparation of a hierarchically assembled Ag nanostructures based on a nanocrystalline assembly was demonstrated using an Ag(I) complex of a dipeptide (AspDap). By heating under N2 gas, a spherical assembly of a nanocrystalline dipeptide-Ag(I) complex (diameter 4-5 µm), which has a morphology similar to the assembled structure of the dipeptide, was transformed to an assembly of Ag nanostructures, where the micrometre-order crystalline morphology was maintained. In addition, detailed scanning electron microscopy studies revealed that Ag nanoparticles (diameter ca. 10 nm) were formed on the surface of the Ag nanostructure. When the Ag(I) ions were reduced to Ag(0), this phenomenon exhibited surface dependence due to the anisotropic two-dimensional Ag(I) arrangement in the crystals. Thermogravimetric measurements and X-ray photoelectron spectroscopy revealed that the reduction proceeds in a stepwise manner around 200-250 °C, together with the removal of primary and secondary carboxylic groups in the dipeptide. Comparison with the heating process of the crystalline Ag(I) complex of ß-alanine indicated that stepwise reduction is key for maintaining the original micrometre-order morphology.