Zernike representation of corneal topography height data after nonmechanical penetrating keratoplasty.

PURPOSE: To demonstrate a mathematical method for decomposition of discrete corneal topography height data into a set of Zernike polynomials and to demonstrate the clinical applicability of these computations in the postkeratoplasty cornea. METHODS: Fifty consecutive patients with either Fuchs' dystrophy (n = 20) or keratoconus (n = 30) were seen at 3 months, 6 months, and 1 year (before suture removal) and again after suture removal following nonmechanical trephination with the excimer laser. Patients were assessed using regular keratometry, corneal topography (TMS-1, simulated keratometry [SimK]), subjective refraction, and best-corrected visual acuity (VA) at each interval. A set of Zernike coefficients with radial degree 8 was calculated to fit two model surfaces: a complete representation (TOTAL) and a representation with parabolic terms only to define an approximate spherocylindrical surface (PARABOLIC). The root mean square error (RMS) was calculated comparing the corneal raw height data with TOTAL (TOTALRMS) and PARABOLIC (PARABOLICRMS). The cylinder of subjective refraction was correlated with the keratometric readings, the SimK, and the respective Zernike parameter. Visual acuity was correlated with the tilt components of the Zernike expansion. RESULTS: The measured corneal surface could be approximated by the composed surface 1 with TOTALRMS < or = 1.93 microm and by surface 2 with PARABOLICRMS < or = 3.66 microm. Mean keratometric reading after suture removal was 2.8+/-0.6 D. At all follow-up examinations, the SimK yielded higher values, whereas the keratometric reading and the refractive cylinder yielded lower values than the respective Zernike parameter. The correlation of the Zernike representation and the refractive cylinder (P = 0.02 at 3 months, P = 0.05 at 6 months and at 1 year, and P = 0.01 after suture removal) was much better than the correlation of the SimK and refractive cylinder (P = 0.3 at 3 months, P = 0.4 at 6 months, P = 0.2 at 1 year, and P = 0.1 after suture removal). Visual acuity increased from 0.23+/-0.10 at the 3-month evaluation to 0.54+/-0.19 after suture removal. After suture removal, there was a statistically significant inverse correlation between VA and tilt (P = 0.02 in patients with keratoconus and P = 0.05 in those with Fuchs' dystrophy). CONCLUSIONS: Zernike representation of corneal topography height data renders a reconstruction of clinically relevant corneal topography parameters with a marked reduction of redundance and a small error. Correlation of amount/axis of refractive cylinder with respective Zernike parameters is more accurate than with keratometry or respective SimK values of corneal topography analysis.

Stromal thermal effects induced by nonmechanical (2.94-mum) erbium:YAG laser corneal trephination.

OBJECTIVE: To determine stromal thermal changes after erbium (Er):YAG laser corneal trephination with the use of 2 open masks. METHODS: Corneal trephination was performed in 89 enucleated pig eyes with an Er:YAG laser (400-microsecond pulse duration), 4 open masks (2 metallic and 2 ceramic) for both donors and recipients, and an automated globe rotation device. Different combinations of laser settings were used: pulse energy, 100, 200, and 400 mJ; repetition rate, 2 and 5 Hz; and spot size, 1.3 and 3.2 mm. Thermal effects in corneal stroma and regularity of the cut edges were quantitatively assessed by light microscopy, transmission and scanning electron microscopy. RESULTS: Best regularity and minimal thermal effects of the cut were observed with the use of ceramic masks at 200 mJ, 2 Hz, and 3.2-mm spot size, with middepth thermal changes of 18 +/- 2 microm. Effects increased with cut depth and were lower in donor corneas and with the use of ceramic masks (P<.001). Regularity of the cut was higher in the donors (P = .05) with lower repetition rates (P<.001). CONCLUSIONS: Even with the "free-running" Er:YAG laser mode, features of the trephination cut resembling those created by the 193-nm excimer laser along metal mask were achieved. Ceramic masks may be more suitable than metal masks. The Er:YAG laser seems to have the potential to be a compact and low-cost alternative in nonmechanical trephination for penetrating keratoplasty. CLINICAL RELEVANCE: Thermal effects after corneal trephination with the free-running Er:YAG laser (2.94 mm) are limited and predictable.

Endothelium and pachymetry of clear corneal grafts 15 to 33 years after penetrating keratoplasty.

PURPOSE: To evaluate long-term endothelial cell count and thickness of clear corneal grafts after penetrating keratoplasty. METHODS: Specular microscopy and ultrasonic pachymetry were performed in 20 eyes (14 eyes that were keratoconus, three aphakic/pseudophakic bullous keratopathy, one Fuchs dystrophy, one had herpetic keratitis, and one avascular scar after injury) of 18 patients (mean age +/- SD 58+/-15 years; range, 34 to 82 years) with a mean follow-up of 22+/-6 years (range, 15 to 33 years). RESULTS: Mean endothelial cell count was 808+/-194 cells per mm2 (range, 575 to 1243 cells/mm2), and thickness was 608+/-75 microm (range, 430 to 751 microm). Endothelial cell count was neither correlated with thickness (P = .25, r2 = .08) nor with follow-up interval (P = .31, r2 = .028). We observed predominantly enlarged endothelial cells and mild polymegethism. No graft rejections were recorded. CONCLUSION: Despite a reduced cell density, the dehydration function of the endothelium may still be sufficient in corneal grafts up to 33 years after penetrating keratoplasty.

Experimental evaluation of two current-generation automated microkeratomes: the Hansatome and the Supratome.

PURPOSE: To compare flap dimensions, cut quality, and blade deterioration after reuse in an experimental setting using two current-generation microkeratomes for laser-assisted in situ keratomileusis. METHODS: Two pivoting-head principle microkeratomes, the Hansatome and the Supratome, were used to perform a corneal flap in 50 freshly enucleated pig cadaver eyes, with an intended thickness of 160 microm. Provided stainless steel blades were used from one to five times. Flap diameter was measured by planimetry and thickness calculated using ultrasonic pachymetry at three different locations. Scanning electron microscopy of stromal beds and blades' cutting edges were performed to assess the cut and blade deterioration after repeated use. RESULTS: Mean flap central thickness (Hansatome/Supratome) was 151 microm (SD 18)/192 microm (SD 32). Progressive thinning/thickening of the flap was observed in the direction toward the hinge (P = .003/P = .021). Mean vertical flap diameters of 8.9 mm (SD 0.3)/8.0 mm (SD 0.4) differed significantly (P = .001). No correlation was found between thickness and diameter (r = 0.03, P = .935/r = 0.12, P = .603). At scanning electron microscopy, smooth cuts were observed with both keratomes using a new blade. Periodical chatter lines at keratectomy edge were present and were more pronounced after blade reuse. Cut quality, blade deterioration, and small tissue remnants on the blade surface were noted with repeated blade use, especially using the Supratome. CONCLUSIONS: Local flap thickness and flap diameter variations are inherent to the instrument used. Comparable cut-surface quality can be obtained with new blades. Although cut and blade deterioration appears to be minor after two reuses, the presence of tissue remnants on the blade surface still limits its reuse.

Experimental correction of irregular corneal astigmatism using topography-based flying-spot-mode excimer laser photoablation.

PURPOSE: To present a novel experimental approach for treating irregular corneal astigmatism. METHODS: After decomposition of topographic analysis data into orthogonal Zernike polynomials, a regular target surface was defined, and the ablation profile was calculated. In a polymethylmethacrylate with an irregular surface, computer-controlled ablation was performed using a 193-nm excimer laser in "flying-spot mode." RESULTS: The difference between flattest and steepest hemimeridians in the 3-mm zone, surface regularity index, and surface asymmetry index were reduced from 8.7 to 1.1 diopters, 1.19 to 0.39, and 1.84 to 0.14, respectively. CONCLUSION: Tying corneal topography into laser software offers a straightforward concept for correction of irregular corneal astigmatism in an experimental model.

Evaluation of corneal flap dimensions and cut quality using the Automated Corneal Shaper microkeratome.

PURPOSE: To evaluate flap dimensions and cut deterioration with repeated blade use in an automated microkeratome. METHODS: The Automated Corneal Shaper (Chiron-Adatomed, Munich, Germany), 160-microm plate attached, was used to make a corneal flap in 90 pig cadaver eyes, reusing blades up to five times. Flap diameter was measured by planimetry and thickness was calculated by ultrasound pachymetry. Scanning electron microscopy of stromal beds and blade cutting edges was performed to assess cut deterioration after repeated blade use. RESULTS: Mean flap central thickness was 125 +/- 32 microm. Mean vertical flap diameter was 7.6 +/- 0.4 mm. No correlation was found between thickness and diameter (r = 0.15, P = .45). Progressive thinning of the flap was observed in the direction of the flap hinge. Smooth cuts (using new blades) with periodic chatter lines at the keratectomy edge and in the stromal bed were observed with scanning electron microscopy. Increasing tissue remnants on the stromal bed and decreasing cut quality occurred with repeated blade use. Blades showed larger tissue remnants, nicks, and even folds on the cutting edge proportional to the number of times blades were used. CONCLUSION: Satisfactory cut quality and reproducibility were obtained after a single use of stainless steel blades in the Automated Corneal Shaper microkeratome. Cut quality was degraded dramatically by repeated use of blades.

Evaluation of corneal flap dimensions and cut quality using a manually guided microkeratome.

BACKGROUND: To evaluate reproducibility of corneal flap dimensions and cut quality with repeated blade use with a manually guided microkeratome in pig eyes. METHODS: Corneal flaps were created using a manually guided microkeratome (Model One, Moria) with an intended 130-microns cut depth in 130 enucleated pig eyes. Flap thickness was calculated by pachymetry and diameter was estimated by means of applanation lenses compared to planimetry. Histology and scanning electron microscopy of samples and blades were performed to evaluate the keratectomy surface and blade cutting edge after repeated use of the blades. RESULTS: Mean flap central thickness was 135 microns (SD, 37 microns). The mean diameter of 8.4 mm (SD, 0.4 mm) correlated significantly (P < .001) to the intended diameter (r = .79). Mean difference from the intended diameter was 0.8 mm (SD, 0.3 mm; range, 0.04 to 1.4 mm). Scanning electron microscopy showed even and smooth cuts with chatter lines at the keratectomy edge using new blades. After repeated blade use, increasing cut irregularity, folds, and tissue remnants on the corneal bed surface, and nicks and tissue remnants at the cutting edge of the blades were observed. CONCLUSION: Reproducible flap dimensions were obtained using the Moria One microkeratome on pig eyes. The cut surface was regular and smooth with a new blade, but surface quality deteriorated considerably after repeated use of the same blade.

"Orientation teeth" in non-mechanical laser corneal trephination for penetrating keratoplasty: 2.94 microm Er:YAG v 193 nm ArF excimer laser.

BACKGROUND/AIMS: "Orientation teeth" at the donor trephination margin and correspondent "notches" at the host margin facilitate graft orientation and avoid "horizontal torsion" induced by asymmetric suture placement. In this study the quality and reproducibility of these structures created by non-mechanical laser corneal trephination were compared using two laser emissions. METHODS: The procedure was performed in 20 enucleated pigs' eyes using open metal masks with eight "orientation teeth/notches" (0.3 x 0.15 mm, base x height), an automated globe rotation device, and either a 193 nm ArF excimer laser or a Q switched 2.94 microm Er:YAG laser. "Teeth/notches" were analysed by planimetry and scanning electron microscopy (SEM). RESULTS: Mean size was 0.30 (0.027) x 0. 16 (0.017) mm for "teeth" and 0.30 (0.035) x 0.15 (0.021) mm for "notches" (excimer), and 0.31 (0.022) x 0.16 (0.015) mm and 0.30 (0.031) x 0.14 (0.021) mm respectively (Er:YAG). Overall, variability of notches was higher than that of teeth. By SEM, comparable cut regularity and sustained ablation profile were observed with both lasers. However, the corneal surface at the cut edge appeared slightly elevated (

Lens opacities after nonmechanical versus mechanical corneal trephination for keratoplasty in keratoconus.

PURPOSE: To compare the lens opacity formation after penetrating keratoplasty (PKP) using nonmechanical excimer laser corneal trephination and mechanical motor trephination. SETTTING: University Eye Clinic, University of Erlangen-Nürnberg, Erlangen, Germany. METHODS: Ninety-six patients with keratoconus (96 eyes) and clear crystalline lenses were randomly assigned to the nonmechanical trephination (NMT) group (n = 46; 35 men; mean age 38.2 years +/- 10.8 [SD]) or the mechanical trephination (MT) group (n = 50; 35 men; mean age 34.4 +/- 9.0 years). Suturing and postoperative treatment were identical. Dilated pupil biomicroscopy and slitlamp lens photography were performed preoperatively and postoperatively at 3 month intervals. Opacities were identified as cortical, nuclear, and posterior subcapsular and graded from 1 (mild) to 3 (severe). RESULTS: Mean follow-up in the NMT/MT group was 3.2 +/- 1.3 years/3.4 +/- 1.1 years. Overall, incident opacities appeared in 23.9%/32.0% of eyes (4.3%/6.0% cortical; 19. 6%/26.0% posterior subcapsular; 0%/0% nuclear) (P =.833). All cortical opacities in both groups were grade 1; posterior subcapsular opacities were grade 1 in 66.6%/61.5% of eyes and grade 2 in 22.2%/30.8% of eyes. One patient in each group presented grade 3 posterior subcapsular opacities. No differences between trephination methods were seen in a 5 year Kaplan-Meier cumulative risk of lens opacity formation (P =.763 cortical, P =.530 posterior subcapsular). CONCLUSIONS: In addition to its optical advantages, nonmechanical corneal trephination appears to have no adverse impact on cataract formation after PKP for keratoconus.

Experimental 193-nm excimer laser trephination with divergent cut angles in penetrating keratoplasty.

PURPOSE: To study the morphologic properties of divergent cut angles after nonmechanical trephination for penetrating keratoplasty in donors and recipients and to assess its implications for donor-recipient stability in an experimental porcine model. METHODS: An excimer laser 193-nm corneal trephination was performed in 30 enucleated porcine eyes by using a modified "open mask" (stainless steel sheet 10CrNi18), to obtain round donor buttons and corresponding recipient beds 7 mm in diameter at the level of Bowman's layer. An automated globe-rotation device allowed different cut angles toward the optical axis. Three cut angles were intended: 0 degrees, 15 degrees divergent, and 35 degrees divergent. Quality of the cuts was assessed by means of histology and scanning electron microscopy (SEM). In a different setting, after alignment of the donor button and corresponding recipient bed in an artificial anterior chamber, intracameral pressure was increased stepwise, modifying the height of a bottle of balanced saline solution connected to the chamber. Criterion for "instability" was the movement of the donor button in all four quadrants during observation with a surgical microscope (x12). RESULTS: Reproducible cut angles and smooth cut surfaces of donors and recipients were confirmed by histologic and SEM evaluation. Macroscopically, a good alignment of a divergent donor button in a corresponding recipient bed was achieved. Instability of the donor buttons occurred with a water column niveau at 2 cm in the 0 degrees cut, at 3 cm in 15 degrees divergent cuts, and at 4.5 cm in 35 degrees divergent cuts. CONCLUSION: The stability of a corneal donor button in a recipient bed seems to increase in proportion with the degree of divergence of the trephination angle. Considering the good histologic quality and macroscopic alignment obtained, divergent cut angles may allow a reduction of sutures, assuring a water-tight wound closure in penetrating keratoplasty.

Design of computer-generated hologram with ring focus for nonmechanical corneal trephination with Er:YAG laser in penetrating keratoplasty.

PURPOSE: To calculate a beam-shaping optical element for homogeneous intensity distribution within a focal ring to be used in nonmechanical trephination with the Er:YAG laser in penetrating keratoplasty instead of a spot guiding device. METHODS: The phase distribution behind a holographic optical element (HOE) k psi(u) can be described by the addition of the hologram phase phiH(u) to the beam phase phiE(u): k psi(u) = phiH(u) + phiE(u), k = 2pi/lambda, where u denotes the coordinates inside the hologram aperture, k an integer, and lambda the laser wavelength. To avoid discontinuous wavefronts leading to speckle noise, a smooth phase function is necessary. After transforming the hologram aperture coordinates into the focal plane x in a focal distance f, psi can be retrieved from the slope equation: inverted delta psi(u) = x(u) - u/f. RESULTS: Creating a ring focus can be reduced to an essentially one-dimensional problem by separation of variables due to the symmetry condition. We calculated a computer-generated eight-level phase-only HOE with 4096 x 4096 pixels from a Gaussian-distributed 2.94 Er:YAG laser spot with a beam diameter of 10 mm and a focal distance of 100 mm. Thereby, a ring focus with an inner/outer radius of 7/8 mm can be created. To avoid Poisson's spo, the symmetry of the problem was broken by circular modulation of the phase leading to a spiral-like structure. The calculated efficiency of the HOE relating the energy within the ring to the total energy was 91%. CONCLUSION: With an HOE it is possible to redistribute the energy along the desired focal ring. The HOE design can be adapted to the intensity distribution of the impinging laser beam with its characteristic aperture shape. A circular homogeneous corneal trephination depth is possible, because the energy fluctuation from pulse to pulse does not locally affect the ablation process. A ring focus for the Er:YAG laser has the potential to render superfluous a manual beam control via micromanipulator and to allow a more rapid and more regular corneal trephination along aperture masks.

[Correlation between semi-quantitative classification of corneal topography and the coefficient of Fourier transformation after non-mechanical perforating keratoplasty]. / Korrelation zwischen semiquantitativer Klassifizierung der Hornhauttopographie und den Koeffizienten der Fourier-Zerlegung nach nichtmechanischer perforierender Keratoplastik.

BACKGROUND: Semiquantitative classification of corneal topography after penetrating keratoplasty has the potential for focusing information about the areal dioptric power of the cornea. The purpose of this study was to objectify the procedure of manual semiquantitative classification using a Fourier transform of corneal topography power data and to correlate both methods. PATIENTS AND METHODS: Fifty patients each (30 keratoconus, 20 Fuchs dystrophy) underwent nonmechanical trephination (excimer laser MEL60, Aesculap-Meditec, Jena) in penetrating keratoplasty. All procedures (7.5-mm trephination diameter in Fuchs, 8.0 mm in keratoconus, double-running 10-0 nylon suture) were done by one surgeon. Pre-, intra- and postoperative treatment were identical. At the follow-up examinations, the keratometric astigmatism, qualitative and quantitative criteria of the automatic videokeratography, visual acuity and refraction were assessed. Corneal topography was classified both manually and based on Fourier coefficients. RESULTS: After a mean follow-up of 24 +/- 5 months, keratometric net astigmatism was 3.0 and 2.7 D with keratoconus and Fuchs dystrophy. Corneal topography analysis showed a higher orthogonality of the bow-tie shape and less asymmetry between opposite hemimeridians with increasing follow-up after keratoplasty. The semiquantitative classification showed a statistically significant correlation with the classification based on Fourier coefficients, especially with higher astigmatism and after suture removal (P = 0.04/0.01 before/after suture removal). DISCUSSION: After nonmechanical trephination, the semiquantitative classification of corneal topography can be synthetized using Fourier analysis of corneal dioptric power data. In the future, this method may be favored for prediction of potential best-corrected visual acuity after penetrating keratoplasty.

[Reproducibility and validity of a new automatic method of specular microscopy analysis of corneal endothelium]. / Reproduzierbarkeit und Validität eines neuen automatisierten Verfahrens der spiegelmikroskopischen Hornhautendothelanalyse.

PURPOSE: This prospective study was designed to test the reproducibility of a new automated technique for analyzing the corneal endothelium and to assess the validity of the technique by comparing it with a standard method. SUBJECTS AND METHODS: We used a contact specular microscope combined with a video camera (Tomey EM-1000) and a computer (IBM compatible PC, 486DX33) with suitable software (Tomey EM-1100, version 0.94). Video images of the corneal endothelium (area: 0.312 mm2) were passed directly into the computer input by means of a frame grabber and were automatically processed. The area to be analyzed could be varied by location and size (5580-135,150 microns2), depending on the quality of the image. Healthy corneas of 67 volunteers (age: 30.9 +/- 8.6 years) were examined. One examiner measured cell density three times in each of 42 eyes (retest-stability); three different examiners made one measurement in each of 25 eyes (objectivity). We evaluated the cell density determined by the computer after automated analysis and assessed the corrected cell density. This second result was obtained after the examiner had corrected the processed image by drawing in cell boundaries that the computer had not recognized or erasing cell boundaries the computer had sketched in by mistake. Additionally, a photograph of the corneal endothelium (specular microscope Bio Optics LSM 2000 A) was obtained from 40 volunteers to be used for manual cell counting applying a "fixed-frame" technique (validity). RESULTS: The corrected values showed a high retest-stability (reliability coefficient r = 0.943) and a high objectivity (r = 0.904). The values obtained by the automated method (2415 +/- 214 cells/mm2) did not differ significantly from those obtained by manual cell counting (2431 +/- 228 cells/mm2) (P = 0.898). The uncorrected values (2252 +/- 190 cells/mm2) were on average 7.2 +/- 2.6% lower than the corrected ones (177 +/- 69 cells/mm2). Retest-stability (r = 0.856) and objectivity (r = 0.737) of the uncorrected values were satisfactory. The uncorrected value was significantly lower than the value of manual cell counting (P < 0.001). The size of the analyzed area (range 12,750-84,708 microns2; average 31,438 +/- 10,655 microns2) had no significant effect on cell density (Spearman's correlation coefficient k = -0.150, P = 0.093). CONCLUSION: The automated method for analyzing the corneal endothelium quickly produces valid, reproducible results in normal corneas, provided that the correction mode of the software is applied.

[Results of the first 1,000 consecutive elective nonmechanical keratoplasties using the excimer laser. A prospective study over more than 12 years]. / Ergebnisse der ersten 1.000 konsekutiven elektiven nichtmechanischen Keratoplastiken mit dem Excimerlaser. Eine prospektive Studie über mehr als 12 Jahre.

BACKGROUND AND PURPOSE: The purpose of this prospective clinical cross-sectional study was to analyse indications, intraoperative, perioperative and postoperative pecularities and complications as well as postoperative functional and morphologic results of the first 1000 consecutive elective round laser keratoplasties. PATIENTS AND METHODS: The age of the 480 females and 520 males (362 x keratoconus), who had been operated on between 07/1989 and 04/2002 ranged from 20 to 92 years (mean 55+/-19). A total of 6 microsurgeons performed 718 x PK only, 222 x a triple procedure and 60 x additional IOL manoeuvres. Recipient and donor trephinations were accomplished with an 193 nm excimer laser (Carl Zeiss Meditec, Jena, Germany) from the epithelial side. RESULTS: In 895 eyes with perioperative corneal erosion, epithelial healing took not more than 3 days in half of cases. During a follow-up period of 1.9+/-1.5 years, in 35 eyes episodes of acute diffuse (8 irreversible) and in 12 eyes episodes of chronic focal (5 irreversible) endothelial immunologic graft reactions (4.7%) occurred between 6 weeks and 4.7 years after PK. Before/after suture removal, median values of astigmatism were 1.5 diopters (D)/2.5 D refractive, 3.0 D/3.3 D keratometric, and 4.0 D/4.2 D topographic. Best-corrected visual acuity was 0.50/0.60, respectively. CONCLUSIONS: More than 12 years of experience with this new technique indicate that besides optical advantages, nonmechanical trephination does not cause intraoperative or postoperative disadvantages for the patient. Under standardised surgical conditions a massive increase of astigmatism after suture removal seems to be avoidable with laser trephination in most cases due to reduction of decentration,"vertical tilt" and especially "horizontal torsion".

[Immunologic transplant reactions after non-mechanical corneal trepanation with the excimer laser]. / Immunologische Transplantatreaktionen nach nichtmechanischer Hornhauttrepanation mit dem Excimerlaser.

BACKGROUND: Nonmechanical trephination has been established as the standard procedure in penetrating keratoplasty (PK) for avascular corneal diseases at our institution. The purpose of this study was to analyze the incidence and reversibility of immunologic graft reactions after nonmechanical trephination and to detect potentially causative factors. PATIENTS AND METHODS: Out of a total series of 400 nonmechanical PKs, 286 consecutive procedures with sufficient follow-up performed between 07/1989 and 09/1997 were included in the study (104 x keratoconus, 78 x Fuchs' dystrophies, 31 x bullous keratopathies, 28 x ulcers, 25 x avascular scars, 12 x stromal dystrophies, 4 x buphthalmos, 4 x others; 202 x PK only, 84 x combined procedures; 276 first PK). The age of the 138 females and 148 males at the time of surgery ranged from 16 to 89 (mean 55 +/- 19) years. The recipient and donor trephinations were performed from the epithelial side using an 193-mm excimer laser (MEL50 or MEL60, Aesculap-Meditec, 1.5 x 1.5 mm spot mode, 16-24 mJ/pulse, repetition rate 30 or 25/s; metal masks). The shape of the recipient trephination was either circular with four or eight "orientation teeth" (n = 251; 5.0-8.0 mm diameter) or elliptical (n = 35, 6.0 x 7.0 to 7.5 x 8.5 mm diameter). In 62% of procedures fresh or short-term-preserved donor tissue was used, and in 38% of procedures the donor tissue was organ-culture-preserved. RESULTS: During a mean follow-up of 22 +/- 18 months (maximum 7.7 years), 10 acute diffuse (3 irreversible; 1.0%) and 3 chronic focal endothelial graft reactions occurred (4.5%) not earlier than 4 months and not later than 35 months after PK. Elective procedures (3.5%) resulted in significantly (P = 0.01) less reactions than acute corneal ulcers (14.3%). After 1, 2 and 3 years, the cumulative reaction rates (Kaplan-Meier values) were 1.3%, 6.3% and 13.9% in elective procedures, none of which, however, occurred after 26 elliptical trephinations. With fresh or short-term-preserved donor tissue (4.2%), graft reactions did not happen more frequently but earlier (12 +/- 6 months) than with organ-culture-preserved donor tissue (2.2%, 30 +/- 6 months). In patients with keratoconus (4.9%), reactions occurred more frequently (P = 0.05, LogRank) and earlier than in patients with Fuchs' dystrophy (1.3%). CONCLUSIONS: In addition to well-established optical advantages, nonmechanical trephination seems to have no immunologic drawbacks.

[Phototherapeutic keratectomy for recurrent corneal erosion syndrome (e-PTK). Report on 116 consecutive interventions]. / Phototherapeutische Kera-tektomie bei rezidivierender Erosio corneae (e-PTK). Bericht über 116 konsekutive Eingriffe.

BACKGROUND AND AIMS: Patients with recurrent corneal erosion syndrome can suffer both psychologically and socially due to excessive pain. After the failure of conservative treatment, conventional surgical interventions, such as anterior stromal puncture have been suggested. The purpose of this study was to assess the morphological and functional results of minimally invasive excimer laser phototherapeutic keratectomy (e-PTK) for treatment of recurrent corneal erosion syndrome and in particular, to evaluate the cumulative recurrence rate. PATIENTS AND METHODS: Between July 1990 and January 2001, 116 e-PTKs have been performed mostly in the acute stage of the disease in this single center study. In 15 eyes an unsuccessful PTK had previously been performed elsewhere. Reasons for the erosion included trauma ( n=80), Cogan's epithelial dystrophy ( n=14), bullous keratopathy ( n=2), and in 20 cases no cause could be detected. A manually guided spot profile was applied in 99 cases (pulse energy 10 mJ, repetition rate 2/s or 3/s, 66-330 pulses). In 17 cases a scanning slit procedure was applied (intended ablation per scan 1 microm, repetition rate 20/s, 447-1,017 pulses). The broad deepithelialisation of Bowman's layer was treated with defocussed overlapping laser pulses. RESULTS: Complete epithelial closure was achieved after an average of 2.3+/-1.3 (median 2) days, the mean follow-up was 2.2+/-1.6 years with a maximum of 5.6 years. Best corrected visual acuity increased from 0.6+/-0.4 preoperatively to 0.9+/-0.3 postoperatively. The keratometric central power remained constant (preoperative 43.0+/-2.2 D (diopters), postoperative 43.3+/-1.9 D). The median keratometric astigmatism remained constant at 1.0 D. Only in 2 patients was an iatrogenic, not completely reversible irregular astigmatism of more than 2 D induced during the learning curve. The spherical equivalent did not change significantly (-1.0+/-3.3 D preop., -1.1+/-3.4 D postop.). In 9 eyes (7.8%) a recurrent epithelial defect occurred after 2-24 (average 8+/-6) months. The cumulative 1-year recurrence rate was 6.5%, the 2-year recurrence rate was 11.5%, the 3-, 4-, and 5-year recurrence rates were all 13.6%. CONCLUSIONS: For recurrent corneal erosion syndrome, e-PTK performed with low pulse energy and low number of pulses can be considered an effective treatment modality to achieve a fast and mostly durable epithelial closure. Even after broad removal of the loose epithelium, change of refraction or induction of an irregular astigmatism with visual loss seems to be the exception.

Ellipsoidal fitting of corneal topography data after arcuate keratotomies with compression sutures.

BACKGROUND AND OBJECTIVE: After paired arcuate keratotomies and compression sutures (AK) for treatment of high postkeratoplasty astigmatism, corneal topography tends to be irregular. The purpose of this study was to demonstrate a mathematical method for approximation of discrete corneal topography power data with an ellipsoid for better appreciation of the clinical outcome after AK. PATIENTS AND METHODS: Thirty-one eyes of 28 consecutive patient who underwent AK for excessive postkeratoplasty astigmatism were studied. Regular keratometry, corneal topography (TMS-1), subjective refraction, and best-corrected visual acuity (VA) were assessed preoperatively and at 1 week and 1 year postoperatively. A simplex algorithm was applied for fitting an ellipsoidal surface to raw corneal topography power data. A set of parameters (meridional power, axis, and asphericity) were calculated. The cylinder of subjective refraction was correlated with the keratometric readings, the simulated keratometry (SimK) of the topography system, and the respective parameters of the model surface. RESULTS: Keratometric astigmatism and the cylinder of the model surface decreased from 8.1 +/- 3.2 and 7.9 +/- 2.9 D preoperatively to 4.5 +/- 2.1 and 5.3 +/- 2.0 D after 1 year, respectively. The asphericity in both meridional cross sections changed from a prolate ellipse preoperatively to an ablate ellipse at the early postoperative follow-up stage. Regarding the cylinder axis, there was a significant correlation of the model surface with the refractive cylinder at all examinations (P < .05), whereas there was no significant correlation of the SimK axis and the refractive cylinder axis. CONCLUSION: The approximation of corneal topography power data with an ellipsoidal model surface renders reconstruction of clinically relevant corneal topography parameters, including corneal asphericity with a marked data compression. Even in markedly irregular corneal surfaces, such as after AK, the correlation of amount/axis of refractive cylinder with the model surface parameters is more accurate than it is with respective SimK values of corneal topography analysis.

The regularity of laser keratectomy depth in nonmechanical trephination for penetrating keratoplasty.

BACKGROUND AND OBJECTIVES: To study the regularity of laser keratectomy depth in nonmechanical trephination for penetrating keratoplasty (PK) and to assess its implications on astigmatism and visual acuity (VA). PATIENTS AND METHODS: In this retrospective clinicopathologic study, the authors enrolled 26 women and 32 men (mean age 54 +/- 20 years) with either keratoconus (n = 27) or Fuchs' dystrophy (n = 31), who underwent excimer laser (193 nm) trephination using a manually guided beam. Donor cornea trephination was performed using an artificial anterior chamber and either an automated rotation device (n = 27) or a manually guided beam (n = 31). The minimum residual corneal thickness (MRCT) and the random residual corneal thickness (RRCT), requiring division with scissors in excised patient buttons or corneoscleral donor rims, were assessed in a masked fashion using histologic sections. The postkeratoplasty keratometric net astigmatism, the subjective cylinder, and the VA were evaluated before and after suture removal. RESULTS: In patients with keratoconus, the mean MRCT (13% +/- 14%) and RRCT (38% +/- 20%) were significantly higher than in the patients with Fuchs' dystrophy (7% +/- 11% and 26% +/- 15%, respectively) (P < .01). When an automated rotation device for trephination of the donor cornea was used, the mean MRCT (2% +/- 4%) and RRCT (14% +/- 11%) were significantly smaller than when a manually guided laser beam was employed (15% +/- 12% and 38% +/- 15%, respectively) (P < .001). After suture removal, the VA increased significantly with automated trephination (P = .04), but not with manually guided trephination of the donor cornea (P = .24). However, after a mean follow-up of 30 +/- 8 months, the differences in the mean keratometric astigmatism, refractive cylinder, and VA after automated trephination (3.0 D, 2.6 D, 20/29, respectively) compared with those after manually guided trephination of the donor cornea (4.3 D, 3.9 D, 20/33, respectively) did not reach statistical significance. CONCLUSIONS: The regularity of donor trephination depth can be significantly improved by using an automated rotation device instead of a manually guided beam. Although residual postkeratoplasty astigmatism was not directly related to trephination depth, the improvement of the functional results after suture removal seems to be promoted by automated trephination.

Graft decentration in penetrating keratoplasty: nonmechanical trephination with the excimer laser (193 nm) versus the motor trephine.

BACKGROUND AND OBJECTIVE: Graft decentration is an obvious cause of postkeratoplasty astigmatism. The purpose of this study was to compare graft decentration after nonmechanical trephination with the excimer laser (193 nm) with that after mechanical motor-trephination in 50 consecutive patients with Fuchs' dystrophy and 50 patients with keratoconus. PATIENTS AND METHODS: To determine decentration in absolute values and clock hours, a postoperative slide was projected with a fixed magnification onto a pattern with circles corresponding to the trephination margin. Using a second transparent and movable pattern with concentric circles and ellipses, the authors measured the amount and direction of decentration relative to the limbus and to the pupil. In addition, the keratometric astigmatism and the refractive cylinder were assessed. In this prospective study, the patients were assigned randomly to either method of trephination. RESULTS: The decentration was significantly lower (P < .002) with excimer laser trephination (0.23 +/- 0.26 mm, relative to the limbus; 0.33 +/- 0.26 mm, relative to the pupil) than with mechanical trephination (0.58 +/- 0.23 mm, relative to the limbus [P < .01]; 0.64 +/- 0.24 mm, relative to the pupil [P < .005]). There was no significant difference between the results obtained in patients with Fuchs' dystrophy and those of patients with keratoconus. The preferred direction of decentration relative to the pupil was the lower quadrants. There was a mild correlation between net astigmatism and the absolute value of decentration. However, with sutures in place, there were no significant differences in the keratometric net astigmatism between mechanical and nonmechanical trephination (P = .16) or between Fuchs' dystrophy and keratoconus (P = .18). CONCLUSIONS: The results indicate that the amount of decentration can be reduced by specific techniques associated with nonmechanical trephination. This might have a favorable impact on the residual astigmatism after suture removal.

[Interpretation of corneal topography after penetrating keratoplasty with wave-front parameters--comparison between non-mechanical trepanation with excimer laser and motor trepanation]. / Interpretation der Hornhauttopographie nach perforierender Keratoplastik mit Wellenfrontparametern--Vergleich zwischen nichtmechanischer Trepanation mittels Excimerlaser und Motortrepanation.

BACKGROUND: Besides irregular astigmatism characterized by the asymmetric components of the corneal surface, the aberration of the cornea from an ideal sphere degrades the optical performance of the "optical system eye". Best-corrected visual acuity may be markedly decreased with an increasing aperture diameter. The purpose of this study was to evaluate the time course of the symmetrical part of the aberration from an ideal sphere and to correlate it with functional results after penetrating keratoplasty (PK). PATIENTS AND METHODS: Fifty patients each (20 primary dystrophies, 30 keratoconus) underwent nonmechanical trephination (NMT) (excimer laser MEL60, Aesculap-Meditec, Heroldsberg, Germany) or mechanical motor trephination (MT) in penetrating keratoplasty. All procedures (7.5 mm in dystrophies, 8.0 mm in keratoconus, 8 orientation teeth in NMT, double-running 10-0 nylon suture) were performed by one surgeon (GOHN). At a postoperative gate of 6 weeks, 6 months, before partial suture removal and after complete suture removal, corneal topography analysis (TMS-1, Tomey, Tennenlohe, Germany) was performed. After a Gram-Schmidt-orthogonalization, corneal topography height data of 25 noncentric rings in 256 hemimeridians were decomposed into Zernike components of radial order n = 16 in the sense of minimizing the root mean square error. The symmetrical part of the deviation from an ideal spherical surface was calculated from the Zernike components Z4(0), Z6(0), ..., Z16(0). From the Zernike components, the longitudinal focus distribution and its standard deviation (SDF) was determined. SDF was correlated with the surface asymmetry index (SAI), the surface regularity index (SRI), the potential visual acuity (PVA) of the TMS-1 and the spectacle-corrected visual acuity. RESULTS: In the time course after PK, SDF decreased from the 6 weeks follow-up examination to the end of the follow-up from 1.27 mm to 0.77 mm in NMT (p = 0.01) and from 1.29 mm to 1.20 mm following MT (p = 0.24) within the central corneal region of 3 mm in diameter. The SAI did not depend on SDF, whereas the SRI correlated significantly inversely with the SDF within the 3 mm zone immediately before (p = 0.01 and p = 0.02) and after suture removal (p = 0.01 each) after NMT. After MT, only a mild inverse correlation was observed before (p = 0.05) and after suture removal (p = 0.04). In the time course after the 6 months follow-up the SDF within the 3 mm central area correlated inversely with the best-corrected visual acuity, more with NMT than with MT (p = 0.005 and p = 0.04 after suture removal). Best-corrected visual acuity was approximately 2 decimal lines better following NMT. CONCLUSIONS: Zernike decomposition of corneal topography height data allows a separation and quantification of aberration of corneal graft surface from an ideal sphere. Although corneal surfaces with a high degree of local irregularities can be decomposed due to the orthogonality condition. Following NMT, SDF was markedly lower after suture removal.