Dramatic effect of black soldier fly larvae on fungal community in a compost.

BACKGROUND: Black soldier fly larvae (BSFL) offer very good prospects for the production of cheap and high-quality dietary protein. This insect is able to consume low-quality substrates, including food waste. The properties and safety of the compost obtained are largely determined by its microbiome. However, while the bacterial component of the BSFL-compost microbiome has been much studied, little is known about its fungal component. In plant-based rearing substrates both the biomass and the metabolic activity of fungi often exceed the biomass and the activity of prokaryotes. So, the purpose of this study was to investigate the fungal community of the compost produced by BSF larvae reared on a food waste substrate. RESULTS: Community structure was determined by metabarcoding of the ITS (internal transcribed spacer) region. Species composition and abundance were determined using the plating technique and subsequent identification of the isolated pure cultures. It was found that the primary mycobiome of the food waste substrate that was used consisted of 19 families, represented mainly by phytopathogenic and endophytic genera. Larva incubation led to the complete elimination of all mycelial fungi from the resulting compost. The final mycobiome consisted of only two yeast species, Pichia kudriavzevii and Diutina rugosa, with a total abundance of 1.2 × 107 CFU g-1 . CONCLUSIONS: The rearing of BSFL led to the complete elimination of mycelial fungi from its feed substrate. The final compost lacked harmful fungi, including molds. This information may be crucial for BSF compost utilization. The phenomenon was also an interesting aspect of zoomicrobial interactions in nature and agriculture. © 2021 Society of Chemical Industry.

The effect of heating rate on the sintering of aluminum nanospheres.

Molecular dynamics simulations have been performed to study the influence of five different heating rates on the sintering of aluminum nanoparticles with a diameter of 4-10 nm, mainly by exploring the atomic migration, radial distribution function (RDF), atomic average displacement, mean square displacement (MSD), radius ratio (i.e., the ratio of the neck radius to the particle radius), shrinkage rate, radius of gyration, sintering temperature and melting point. It is found that the displacement of surface atoms is always larger than the displacement of the internal atoms at the same heating rate during the sintering process. Radius ratio and shrinkage go through three stages as the temperature increases: (1) an abrupt increase after reaching the sintering temperature; (2) an almost plateau region within a wide temperature range; (3) finally a drastic increase again after reaching the melting point. Although the radius of gyration also goes through three stages, nonetheless the trend is opposite to radius ratio and shrinkage. For aluminum nanoparticles with the same diameter, at a lower heating rate, the atomic displacement, mean square displacement, radius ratio, shrinkage, and radius of gyration change more remarkably with increasing temperature. The lower heating rate and smaller nanoparticle diameter correspond to a lower sintering temperature and melting point.

Impact of GeneXpert MTB/RIF® on treatment initiation and outcomes of RIF-resistant and RIF-susceptible TB patients in Vladimir TB dispensary, Russia.

BACKGROUND: The main advantage of GeneXpert MTB/RIF® (Xpert) molecular diagnostic technology is the rapid detection of M.tuberculosis DNA and mutations associated with rifampicin (RIF) resistance for timely initiation of appropriate treatment and, consequently, preventing further transmission of the disease. We assessed time to treatment initiation and treatment outcomes of RIF-resistant and RIF-susceptible TB patients diagnosed and treated in Vladimir TB Dispensary, Russia in 2012, before and after implementation of GeneXpert MTB/RIF® diagnostic technology. METHODS: All adult patients suspected of having TB during February-December 2012 underwent a clinical examination, chest x-ray, microscopy, culture, and phenotypic drug susceptibility testing (DST). Starting August 2012 Xpert diagnostic technology became available in the facility. We used logistic regression to compare treatment outcomes in pre-Xpert and post-Xpert periods. Kaplan-Meier curves and log-rank test were used to compare the time to treatment initiation between the groups. RESULTS: Of 402 patients screened for TB during February-December 2012, 338 were diagnosed with TB (280 RIF-susceptible, 58 RIF-resistant). RIF-resistant patients in the post-Xpert group started treatment with second-line drugs (SLD) earlier than those in pre-Xpert group (median 11 vs. 37 days, Log-rank p = 0.02). The hazard ratio for time to SLD treatment initiation was significantly higher in post-Xpert group (HR:2.06; 95%CI:1.09,3.89) compared to pre-Xpert group. Among the 53/58 RIF-resistant TB patients with available treatment outcome, 28 (53%) had successful outcomes (cured/completed treatment) including 15/26 (58%) in post-Xpert group versus 13/27 (48%) in pre-Xpert group. The observed difference, however, was not statistically significant (OR:0.69; 95%CI:0.23,2.06). Among RIF-susceptible TB cases time to treatment initiation was not significantly different between the groups (2 vs. 3 days, Log-rank p = 0.73). Of 252/280 RIF-susceptible TB cases with treatment outcome, 199 (79%) cases had successful outcome including 94/114 (82%) in post-Xpert group versus 105/138 (76%) in pre-Xpert group (OR:0.68; 95%CI:0.36,1.26). CONCLUSION: We observed that availability of Xpert for initial diagnosis significantly reduced the time to SLD treatment for RIF-resistant patients in the Vladimir TB Dispensary. Although implementation of rapid diagnostics did not improve treatment outcomes, early diagnosis of MDR-TB is important for selection of appropriate treatment regimen and prevention of transmission of drug-resistant strains of TB.

Epidemiology of Primary Multidrug-Resistant Tuberculosis, Vladimir Region, Russia.

We studied the epidemiology of drug-resistant tuberculosis (TB) in Vladimir Region, Russia, in 2012. Most cases of multidrug-resistant TB (MDR TB) were caused by transmission of drug-resistant strains, and >33% were in patients referred for testing after mass radiographic screening. Early diagnosis of drug resistance is essential for preventing transmission of MDR TB.

Atomic insights into thickness-dependent deformation mechanism and mechanical properties of Ag/PMMA ultra-thin nanofilms.

In this work, the nanoindentations on bilayer composite nanofilms composed of metal Ag and polymer PMMA were simulated using molecular dynamics. The effects of the thickness of Ag and PMMA on the elastic moduli of the composite films were analyzed from Hertz contact theory, dislocation evolution and atomic migration. The results show that the maximum penetration depth that the Hertz model could well describe is about 6 Å, and this limiting value is almost independent on the film thickness. The deformation mode of the Ag films gradually changes from bending mode to indentation mode with an increase in Ag thickness, which improves the elastic modulus of the composite films. The rule of mixtures could give a theoretical prediction about the elastic modulus of the composite film close to the nanoindentation, and Hertz theory could also be used as long as the thickness of Ag films exceeded a certain value. The introduction of a PMMA layer impedes the development of dislocation in the Ag layer and improves the elastic limit of the composite films. This work provides an important basis for experimentally measuring the overall elastic modulus of metal/polymer composite film based on nanoindentation or extracting the elastic modulus of metal film from the overall indentation response of the composite film.

Anthropogenic Neighborhood Impact on Bacterial and Fungal Communities in Polar Bear Feces.

Climate changes cause a dramatical increase in the ice-free season in the Arctic, forcing polar bears ashore, closer to human settlements associated with new and non-natural food objects. Such a diet may crucially transform the intestinal microbiome and metabolism of polar bears. The aim of this study was to characterize changes in the gut bacterial and fungal communities resulting from the transition to anthropogenic food objects by the means of 16S and ITS metabarcoding. Thus, rectal samples from 16 wild polar bears from the Kara-Barents subpopulation were studied. Human waste consuming resulted in a significant increase in the relative abundance of fermentative bacteria (Lactobacillaceae, Leuconostocaceae, and Streptococcaceae) and a decrease in proteolytic Enterobacteriaceae. However, the alpha-diversity parameters remained similar. Also, for the first time, the composition of the fungal community of the polar bear intestine was determined. Diet change is associated with the displacement of eurybiontic fungi (Thelebolus, Dipodascus, Candida (sake), and Geotrichum) by opportunistic Candida (tropicalis), Kazachstania, and Trichosporon. Feeding on human waste does not cause any signs of dysbiosis and probably leads to adaptive changes in the bacterial microbiome. However, the emergence of fungal facultative pathogens increases the risk of infections.

Addition of Zn during the phosphine-based synthesis of indium phospide quantum dots: doping and surface passivation.

Zinc-doped InP(Zn) colloidal quantum dots (QDs) with narrow size distribution and low defect concentration were grown for the first time via a novel phosphine synthetic route and over a wide range of Zn doping. We report the influence of Zn on the optical properties of the obtained quantum dots. We propose a mechanism for the introduction of Zn in the QDs and show that the incorporation of Zn atoms into the InP lattice leads to the formation of Zn acceptor levels and a luminescence tail in the red region of the spectra. Using photochemical etching with HF, we confirmed that the Zn dopant atoms are situated inside the InP nanoparticles. Moreover, doping with Zn is accompanied with the coverage of the QDs by a zinc shell. During the synthesis Zn myristate covers the QD nucleus and inhibits the particle growth. At the same time the zinc shell leads to an increase of the luminescence quantum yield through the reduction of phosphorous dangling bonds. A scenario for the growth of the colloidal InP(Zn) QDs was proposed and discussed.