Quantum spin nematic phase in a square-lattice iridate.

Spin nematic is a magnetic analogue of classical liquid crystals, a fourth state of matter exhibiting characteristics of both liquid and solid1,2. Particularly intriguing is a valence-bond spin nematic3-5, in which spins are quantum entangled to form a multipolar order without breaking time-reversal symmetry, but its unambiguous experimental realization remains elusive. Here we establish a spin nematic phase in the square-lattice iridate Sr2IrO4, which approximately realizes a pseudospin one-half Heisenberg antiferromagnet in the strong spin-orbit coupling limit6-9. Upon cooling, the transition into the spin nematic phase at TC ≈ 263 K is marked by a divergence in the static spin quadrupole susceptibility extracted from our Raman spectra and concomitant emergence of a collective mode associated with the spontaneous breaking of rotational symmetries. The quadrupolar order persists in the antiferromagnetic phase below TN ≈ 230 K and becomes directly observable through its interference with the antiferromagnetic order in resonant X-ray diffraction, which allows us to uniquely determine its spatial structure. Further, we find using resonant inelastic X-ray scattering a complete breakdown of coherent magnon excitations at short-wavelength scales, suggesting a many-body quantum entanglement in the antiferromagnetic state10,11. Taken together, our results reveal a quantum order underlying the Néel antiferromagnet that is widely believed to be intimately connected to the mechanism of high-temperature superconductivity12,13.

Chiral Spectroscopy of Nanostructures.

ConspectusChirality is ubiquitous in the universe and in living creatures over detectable length scales from the subatomic to the galactic, as exemplified in the two extremes by subatomic particles (neutrinos) and spiral galaxies. Between them are living creatures that display multiple levels of chirality emerging from hierarchically assembled asymmetric building blocks. Not too far from the bottom of this pyramid are the foundational building blocks with chiral atomic centers on sp3 carbon atoms exemplified by l-amino acids and d-sugars that are self-assembled into higher-order structures with increasing dimensions forming highly complex, amazingly functional, and energy-efficient living systems. The organization and materials employed in their construction inspired scientists to replicate complex living systems via the self-assembly of chiral components. Multiple studies pointed to unexpected and unique electromagnetic properties of chiral structures with nanoscale and microscale dimensions, including giant circular dichroism and collective circularly polarized scattering that their constituent units did not possess.To address the wide variety of chiral geometries observed in continuous materials, singular particles, and their complex systems, multiple analytic techniques are needed. Simultaneously, their spectroscopic properties create a pathway to multiple applications. For example, mirror-asymmetric vibrations at chiral centers formed by sp3 carbon atoms lead to optical activity for the infrared (IR) wavelength regions. At the same time, understanding the optical activity in, for example, the IR region enables biomedical applications because multiple modalities of biomedical imaging and vibrational optical activity (VOA) of biomolecules are known for IR range. In turn, VOA can be realized in both absorption and emission modalities due to large magnetic transition moments, as vibrational circular dichroism (VCD) or Raman optical activity (ROA) spectroscopy. In addition to the VOA, in the range of longer wavelengths, lattice vibrational mode or phononic behavior occurs in chiral crystals and nanoassemblies, which can be readily detected by terahertz circular dichroism (TCD) spectroscopy. Meanwhile, chiral self-assembly can induce circularly polarized light emission (CPLE) regardless of the existence of chirality in coassembled fluorophores. The CPLE from self-assembled chiral materials is particularly interesting because the CPLE can originate from both circularly polarized luminescence and circularly polarized scattering (CPS). Furthermore, because self-assembled nanostructures often exhibit stronger optical activity than their building blocks owing to dimension and resonance effects, the optical activity of single assembled nanostructures can be investigated by using microscopic technology combined with chiral optics. Here, we describe the state of the art for spectroscopic methods for the comprehensive analysis of chiral nanomaterials at various photon wavelengths, addressed with special attention given to new tools emerging both for materials with self-organized hierarchical chirality and single-particle spectroscopy.

Graphene Via Contact Architecture for Vertical Integration of vdW Heterostructure Devices.

Two-dimensional (2D) devices and their van der Waals (vdW) heterostructures attract considerable attention owing to their potential for next-generation logic and memory applications. In addition, 2D devices are projected to have high integration capabilities, while maintaining nanoscale thickness. However, the fabrication of 2D devices and their circuits is challenging because of the high precision required to etch and pattern ultrathin 2D materials for integration. Here, the fabrication of a graphene via contact architecture to electrically connect graphene electrodes (or leads) embedded in vdW heterostructures is demonstrated. Graphene via contacts comprising of edge and fluorinated graphene (FG) electrodes are fabricated by successive fluorination and plasma etching processes. A one-step fabrication process that utilizes the graphene contacts is developed for a vertically integrated complementary inverter based on n- and p-type 2D field-effect transistors (FETs). This study provides a promising method to fabricate vertically integrated 2D devices, which are essential in 2D material-based devices and circuits.

Tailoring Single- and Double-Sided Fluorination of Bilayer Graphene via Substrate Interactions.

While many technologies rely on multilayer heterostructures, most of the studies on chemical functionalization have been limited to monolayer graphene. In order to use functionalization in multilayer systems, we must first understand the interlayer interactions between functionalized and nonfunctionalized (intact) layers and how to selectively functionalize one layer at a time. Here, we demonstrate a method to fabricate single- or double-sided fluorinated bilayer graphene (FBG) by tailoring substrate interactions. Both the top and bottom surfaces of bilayer graphene on the rough silicon dioxide (SiO2) are fluorinated; meanwhile, only the top surface of graphene on hexagonal boron nitride (hBN) is fluorinated. The functionalization type affects electronic properties; double-sided FBG on SiO2 is insulating, whereas single-sided FBG on hBN maintains conducting, showing that the intact bottom layer becomes electrically decoupled from the fluorinated top insulating layer. Our results define a straightforward method to selectively functionalize the top and bottom surfaces of bilayer graphene.

Tunable Wettability of Graphene through Nondestructive Hydrogenation and Wettability-Based Patterning for Bioapplications.

The wettability of graphene has been extensively studied and successfully modified by chemical functionalization. Nevertheless, the unavoidable introduction of undesired defects and the absence of systematic and local control over wettability by previous methods have limited the use of graphene in applications. In addition, microscale patterning, according to wettability, has not been attempted. Here, we demonstrate that the wettability of graphene can be systematically controlled and surface patterned into microscale sections based on wettability without creating significant defects, possible by nondestructive hydrogen plasma. Hydrophobic graphene is progressively converted to hydrophilic hydrogenated graphene (H-Gr) that reaches superhydrophilicity. The great contrast in wettability between graphene and H-Gr makes it possible to selectively position and isolate human breast cancer cells on arrays of micropatterns since strong hydrophilicity facilitates the adsorption of the cells. We believe that our method will provide an essential technique for enabling surface and biological applications requiring microscale patterns with different wettability.

Virus-based SELEX (viro-SELEX) allows development of aptamers targeting knotty proteins.

It has been 100 years since the worst flu (Spanish flu) mankind has ever experienced. Rapid, accurate diagnosis and subtyping of flu are still an urgent unmet medical need. By using surrogate virus-based SELEX (viro-SELEX), we report here multiple advances incorporated into the field of flu diagnostics: (i) aptamers that can bind to the native virus well even though they cannot bind strongly to a recombinant protein (hemagglutinin); (ii) a couple of aptamers that can target a broad range of strains belonging to the H1N1 subtype and detect only the H1N1 subtype and nothing else; (iii) a highly sensitive lateral flow assay system (limit of detection is 0.08 HAU) using fluorescence-tagged aptamers. The viro-SELEX method of aptamer selection in conjunction with a fluorescent tag on aptamers is a very useful approach to develop highly sensitive, specific, portable, rapid, and quantitative point-of-care testing diagnostic tools for the future.

Lifshitz-Transition-Driven Metal-Insulator Transition in Moderately Spin-Orbit-Coupled Sr_{2-x}La_{x}RhO_{4}.

Motivated by the novel insulating state of Sr_{2}IrO_{4} from strong spin-orbit coupling (SOC), we investigate, by means of angle resolved photoemission, the metal-insulator transition (MIT) mechanism in Sr_{2-x}La_{x}RhO_{4} whose mother compound is isovalent and isostructural but has smaller SOC strength compared to Sr_{2}IrO_{4}. Transport and angle resolved photoemission results from single crystalline Sr_{2-x}La_{x}RhO_{4} revealed that the MIT occurs coincidentally with a multi- to single-band transition (Lifshitz transition) at x=0.4. Starting from x=0.4, there is a gradual but anomalous enhancement in the band gap size with additional electron doping, suggesting that the insulating phase in Sr_{2-x}La_{x}RhO_{4} is a new type which has been rarely investigated. These results suggest that the insulating phase in Sr_{2-x}La_{x}RhO_{4} is likely induced by the moderate SOC strength and electron doping effect from the La. Our findings not only elucidate the MIT mechanism in Sr_{2-x}La_{x}RhO_{4}, but may also open new avenues for novel MIT research in moderate SOC regimes.

eIF2A, an initiator tRNA carrier refractory to eIF2α kinases, functions synergistically with eIF5B.

The initiator tRNA (Met-tRNA i Met ) at the P site of the small ribosomal subunit plays an important role in the recognition of an mRNA start codon. In bacteria, the initiator tRNA carrier, IF2, facilitates the positioning of Met-tRNA i Met on the small ribosomal subunit. Eukarya contain the Met-tRNA i Met carrier, eIF2 (unrelated to IF2), whose carrier activity is inhibited under stress conditions by the phosphorylation of its α-subunit by stress-activated eIF2α kinases. The stress-resistant initiator tRNA carrier, eIF2A, was recently uncovered and shown to load Met-tRNA i Met on the 40S ribosomal subunit associated with a stress-resistant mRNA under stress conditions. Here, we report that eIF2A interacts and functionally cooperates with eIF5B (a homolog of IF2), and we describe the functional domains of eIF2A that are required for its binding of Met-tRNA i Met , eIF5B, and a stress-resistant mRNA. The results indicate that the eukaryotic eIF5B-eIF2A complex functionally mimics the bacterial IF2 containing ribosome-, GTP-, and initiator tRNA-binding domains in a single polypeptide.

The bent conformation of poly(A)-binding protein induced by RNA-binding is required for its translational activation function.

A recent study revealed that poly(A)-binding protein (PABP) bound to poly(A) RNA exhibits a sharply bent configuration at the linker region between RNA-recognition motif 2 (RRM2) and RRM3, whereas free PABP exhibits a highly flexible linear configuration. However, the physiological role of the bent structure of mRNA-bound PABP remains unknown. We investigated a role of the bent structure of PABP by constructing a PABP variant that fails to form the poly(A)-dependent bent structure but maintains its poly(A)-binding activity. We found that the bent structure of PABP/poly(A) complex is required for PABP's efficient interaction with eIF4G and eIF4G/eIF4E complex. Moreover, the mutant PABP had compromised translation activation function and failed to augment the formation of 80S translation initiation complex in an in vitro translation system. These results suggest that the bent conformation of PABP, which is induced by the interaction with 3' poly(A) tail, mediates poly(A)-dependent translation by facilitating the interaction with eIF4G and the eIF4G/eIF4E complex. The preferential binding of the eIF4G/eIF4E complex to the bent PABP/poly(A) complex seems to be a mechanism discriminating the mRNA-bound PABPs participating in translation from the idling mRNA-unbound PABPs.

Elucidating rice cell metabolism under flooding and drought stresses using flux-based modeling and analysis.

Rice (Oryza sativa) is one of the major food crops in world agriculture, especially in Asia. However, the possibility of subsequent occurrence of flood and drought is a major constraint to its production. Thus, the unique behavior of rice toward flooding and drought stresses has required special attention to understand its metabolic adaptations. However, despite several decades of research investigations, the cellular metabolism of rice remains largely unclear. In this study, in order to elucidate the physiological characteristics in response to such abiotic stresses, we reconstructed what is to our knowledge the first metabolic/regulatory network model of rice, representing two tissue types: germinating seeds and photorespiring leaves. The phenotypic behavior and metabolic states simulated by the model are highly consistent with our suspension culture experiments as well as previous reports. The in silico simulation results of seed-derived rice cells indicated (1) the characteristic metabolic utilization of glycolysis and ethanolic fermentation based on oxygen availability and (2) the efficient sucrose breakdown through sucrose synthase instead of invertase. Similarly, flux analysis on photorespiring leaf cells elucidated the crucial role of plastid-cytosol and mitochondrion-cytosol malate transporters in recycling the ammonia liberated during photorespiration and in exporting the excess redox cofactors, respectively. The model simulations also unraveled the essential role of mitochondrial respiration during drought stress. In the future, the combination of experimental and in silico analyses can serve as a promising approach to understand the complex metabolism of rice and potentially help in identifying engineering targets for improving its productivity as well as enabling stress tolerance.

Tunable Colossal Anomalous Hall Conductivity in Half-Metallic Material Induced by d-Wave-Like Spin-Orbit Gap.

The anomalous Hall conductivity (AHC) in magnetic materials, resulting from inverted band topology, has emerged as a key adjustable function in spin-torque devices and advanced magnetic sensors. Among systems with near-half-metallicity and broken time-reversal symmetry, cobalt disulfide (CoS2) has proven to be a material capable of significantly enhancing its AHC. In this study, the AHC of CoS2 is empirically assessed by manipulating the chemical potential through Fe- (hole) and Ni- (electron) doping. The primary mechanism underlying the colossal AHC is identified through the application of density functional theory and tight-binding analyses. The main source of this substantial AHC is traced to four spin-polarized massive Dirac dispersions in the kz = 0 plane of the Brillouin zone, located slightly below the Fermi level. In Co0.95Fe0.05S2, the AHC, which is directly proportional to the momentum-space integral of the Berry curvature (BC), reached a record-breaking value of 2507 Ω-1cm-1. This is because the BCs of the four Dirac dispersions all exhibit the same sign, a consequence of the d-wave-like spin-orbit coupling among spin-polarized eg orbitals.

Ultraclean Interface of Metal Chalcogenides with Metal through Confined Interfacial Chalcogenization.

Acquisition of defect-free transition metal dichalcogenides (TMDs) channels with clean heterojunctions is a critical issue in the production of TMD-based functional electronic devices. Conventional approaches have transferred TMD onto a target substrate, and then apply the typical device fabrication processes. Unfortunately, those processes cause physical and chemical defects in the TMD channels. Here, a novel synthetic process of TMD thin films, named confined interfacial chalcogenization (CIC) is proposed. In the proposed synthesis, a uniform TMDlayer is created at the Au/transition metal (TM) interface by diffusion of chalcogen through the upper Au layer and the reaction of chalcogen with the underlying TM. CIC allows for ultraclean heterojunctions with the metals, synthesis of various homo- and hetero-structured TMDs, and in situ TMD channel formation in the last stage of device fabrication. The mechanism of TMD growth is revealed by the TM-accelerated chalcogen diffusion, epitaxial growth of TMD on Au(111). We demonstrated a wafer-scale TMD-based vertical memristors which exhibit excellent statistical concordance in device performance enabled by the ultraclean heterojunctions and superior uniformity in thickness. CIC proposed in this study represents a breakthrough in in TMD-based electronic device fabrication and marking a substantial step toward practical next-generation integrated electronics.

The future of two-dimensional semiconductors beyond Moore's law.

The primary challenge facing silicon-based electronics, crucial for modern technological progress, is difficulty in dimensional scaling. This stems from a severe deterioration of transistor performance due to carrier scattering when silicon thickness is reduced below a few nanometres. Atomically thin two-dimensional (2D) semiconductors still maintain their electrical characteristics even at sub-nanometre scales and offer the potential for monolithic three-dimensional (3D) integration. Here we explore a strategic shift aimed at addressing the scaling bottleneck of silicon by adopting 2D semiconductors as new channel materials. Examining both academic and industrial viewpoints, we delve into the latest trends in channel materials, the integration of metal contacts and gate dielectrics, and offer insights into the emerging landscape of industrializing 2D semiconductor-based transistors for monolithic 3D integration.

Electrically Confined Electroluminescence of Neutral Excitons in WSe2 Light-Emitting Transistors.

Monolayer transition metal dichalcogenides (TMDs) have drawn significant attention for their potential in optoelectronic applications due to their direct band gap and exceptional quantum yield. However, TMD-based light-emitting devices have shown low external quantum efficiencies as imbalanced free carrier injection often leads to the formation of non-radiative charged excitons, limiting practical applications. Here, electrically confined electroluminescence (EL) of neutral excitons in tungsten diselenide (WSe2) light-emitting transistors (LETs) based on the van der Waals heterostructure is demonstrated. The WSe2 channel is locally doped to simultaneously inject electrons and holes to the 1D region by a local graphene gate. At balanced concentrations of injected electrons and holes, the WSe2 LETs exhibit strong EL with a high external quantum efficiency (EQE) of ≈8.2 % at room temperature. These experimental and theoretical results consistently show that the enhanced EQE could be attributed to dominant exciton emission confined at the 1D region while expelling charged excitons from the active area by precise control of external electric fields. This work shows a promising approach to enhancing the EQE of 2D light-emitting transistors and modulating the recombination of exciton complexes for excitonic devices.

Bioreactor engineering using disposable technology for enhanced production of hCTLA4Ig in transgenic rice cell cultures.

Two kinds of disposable bioreactors, air-lift disposable bioreactors (ADB) and wave disposable bioreactors (WDB) were compared with stirred-tank reactors (5-L STR). These bioreactors were successfully applied to transgenic rice cell cultures for the production of recombinant human cytotoxic T-lymphocyte antigen 4-immunoglobulin (hCTLA4Ig). In both systems, a fed-batch culture method was used to produce hCTLA4Ig efficiently by feeding concentrated amino acids and production levels were enhanced when dissolved oxygen (DO) level was regulated at 30% using pure oxygen sparging. Agitation and aeration rate during cultivation in ADB and WDB were determined by the same mixing time. The results in both disposable bioreactors showed similar values in maximum cell density (11.9 gDCW/L and 12.6 gDCW/L), doubling time (4.8- and 5.0-day), and maximum hCTLA4Ig concentration (43.7 and 43.3 mg/L). Relatively higher cell viability was sustained in the ADB whereas hCTLA4Ig productivity was 1.2-fold higher than that in WDB. The productivity was improved by increasing aeration rate (0.2 vvm). Overall, our experiments demonstrate pneumatically driven disposable bioreactors are applicable for the production of recombinant proteins in plant cell cultures. These results will be useful for development and scale-up studies of disposable bioreactor systems for transgenic plant cell cultures.

Facile one-pot synthesis of polyethyleneimine functionalized α-FeOOH nanoraft consisted of single-layer parallel-aligned ultrathin nanowires for efficient removal of Cr (VI): Synergy of reduction and adsorption.

Two-dimensional (2D) iron oxide-hydroxide (FeOOH) nanomaterials as low-cost and environmental-friendly composites are promising materials for application in heavy metal elimination. However, developing 2D FeOOH adsorbents with high adsorption capacity and excellent durability toward Cr (VI) removal is still a challenge due to the intrinsically non-layered structure. Here, a novel polyethyleneimine (PEI) functionalized 2D single-layer nano-raft-like α-FeOOH (α-FeOOH NF) consisted of parallel-aligned ultrathin nanowires was obtained via a facile one-pot hydrothermal approach. It was found that the 2D α-FeOOH NF nanostructure was formed by an in-plane iterative self-assembly mechanism, where α-FeOOH nanoparticles acted as intermediates and iterative seeds with anisotropic growth. The as-prepared 2D α-FeOOH NF possessed porous structure and high surface area, which provided a strong ability to capture the Cr (VI) ions in water. Benefiting from the unique structure and PEI modification, it exhibited fast adsorption kinetic rate, high reusability, and high adsorption capacity toward Cr(VI) removal. The removal mechanism involved adsorption and reduction process. Besides, the molecular dynamic simulations disclosed a facet-dependent Cr(VI) adsorption behavior of α-FeOOH. The maximum adsorption capacity was 67.1 mg/g and the removal efficiency still maintained 83.9 % in the fifth cycle. This work demonstrated that 2D α-FeOOH NF could be a promising adsorbent for Cr(VI) removal.

Amorphous Carbon Films for Electronic Applications.

While various crystalline carbon allotropes, including graphene, have been actively investigated, amorphous carbon (a-C) thin films have received relatively little attention. The a-C is a disordered form of carbon bonding with a broad range of the CC bond length and bond angle. Although accurate structural analysis and theoretical approaches are still insufficient, reproducible structure-property relationships have been accumulated. As the a-C thin film is now adapted as a hardmask in the semiconductor industry and new properties are reported continuously, expectations are growing that it can be practically used as active materials beyond as a simple sacrificial layer. In this perspective review article, after a brief introduction to the synthesis and properties of the a-C thin films, their potential practical applications are proposed, including hardmasks, extreme ultraviolet (EUV) pellicles, diffusion barriers, deformable electrodes and interconnects, sensors, active layers, electrodes for energy, micro-supercapacitors, batteries, nanogenerators, electromagnetic interference (EMI) shielding, and nanomembranes. The article ends with a discussion on the technological challenges in a-C thin films.

Adsorptive loss of secreted recombinant proteins in transgenic rice cell suspension cultures.

Adsorptive loss of human cytotoxic T-lymphocyte antigen 4-immunoglobulin (hCTLA4Ig) in transgenic rice cell suspension cultures was investigated using glass flasks, plastic flasks, disposable vessels, and stainless steel vessels. When hCTLA4Ig was added to the glass flasks containing sterile AA medium, a rapid decrease in the concentration of hCTLA4Ig, independent on pH, was observed resulting in more than 90% of the protein loss within 1 h due to the surface adsorption. When the same experiments were performed on four different types of culture equipments mentioned above, the lowest adsorption level was observed in the plastic flasks and the highest level was observed in the glass flasks. The use of the plastic flasks retarded the adsorptive loss of hCTLA4Ig at the early stage of the protein production. There was a significant increase in the production of hCTLA4Ig when the flasks were coated with bovine serum albumin. However, the spike test of purified hCTLA4Ig at two different concentrations of 15 and 100 mg L(-1) in 500-mL spinner flasks confirmed that the amount of hCTLA4Ig adsorbed was dependent on the surface area of the flasks but not on the concentrations. In conclusion, although the protein adsorption affected the total amount of the protein yielded to some extent, it could be regarded as a minor factor in transgenic plant cell cultures with higher titer.

Chiral Biomaterials for Nanomedicines: From Molecules to Supraparticles.

Chirality, the property whereby an object or a system cannot be superimposed on its mirror image, prevails amongst nature over various scales. Especially in biology, numerous chiral building blocks and chiral-specific interactions are involved in many essential biological activities. Despite the prevalence of chirality in nature, it has been no longer than 70 years since the mechanisms of chiral-specific interactions drew scientific attention and began to be studied. Owing to the advent of chiral-sensitive equipment such as circular dichroism spectrometers or chiral liquid columns for chromatography, it has recently been possible to achieve a deeper understanding of the chiral-specific interactions and consequential impacts on the functionality and efficiency of nanomedicine. From this point of view, it is worthwhile to examine previously reported chiral biomaterials with their compositions and possible applications to achieve new paradigms of biomaterials. This review discusses chiral materials on various scales and their biological applications.