Polluted brownfield site converted into a public urban park: A place providing ecosystem services or a hidden health threat?

The conversion of old brownfield sites into places once again serving society is becoming an upward global trend, especially in urban areas. Due to the increasingly growing pressure on the expansion of urban green spaces, such sites can become, for instance, urban parks. The aim of the study was to assess whether the solution is appropriate and if it does not pose a potential health risk. Heavy pollution of soils was found out by means of the example of the urban park newly established in a reclaimed area of a historic mining town. The high average values in the topsoil were found out mainly in As (132 mg/kg), Cd (6.8 mg/kg), Pb (535 mg/kg) and Zn (1604 mg/kg). The assessment of the non-carcinogenic health risk has revealed possible As-related adverse health effects in children even at irregular park visits. According to the carcinogenic risk assessment, As, Cd, Cr and Ni can be ranked in the category of an acceptable total risk for regulatory purposes. The health status of park vegetation as a significant component of the urban ecosystem was also assessed. Soil phytotoxicity brought about severe damage to the seedlings, with a mortality rate of up to 84% locally. The results indicate that heavily polluted brownfield sites with historic mining-related activities are not suitable for establishing urban parks even after reclamation and nature-based solutions may not be invariably appropriate. Based on the findings, the management steps that ought to be implemented in the process of brownfield redevelopment into the urban park even after its establishment have been highlighted in order to minimize the health risk to park visitors while providing the required ecosystem services by vegetation.

Oxidative Stress and Heavy Metals in Plants.

Oxidative stress is a pathological process related to not only animal kingdom but also plants. Regarding oxidative stress in plants, heavy metals are frequently discussed as causative stimuli with relevance to ecology. Because heavy metals have broad technological importance, they can easily contaminate the environment. Much of previous effort regarding the harmful impact of the heavy metals was given to their toxicology in the animals and humans. Their implication in plant pathogeneses is less known and remains underestimated.The current paper summarizes basic facts about heavy metals, their distribution in soil, mobility, accumulation by plants, and initiation of oxidative stress including the decline in basal metabolism. The both actual and frontier studies in the field are summarized and discussed. The major pathophysiological pathways are introduced as well and link between heavy metals toxicity and their ability to initiate an oxidative damage is provided. Mobility and bioaccessibility of the metals is also considered as key factors in their impact on oxidative stress development in the plant. The metals like lead, mercury, copper, cadmium, iron, zinc, nickel, vanadium are depicted in the text.Heavy metals appear to be significant contributors to pathological processes in the plants and oxidative stress is probably an important contributor to the effect. The most sensitive plant species are enlisted and discussed in this review. The facts presented here outline next effort to investigate pathological processes in the plants.

Effect of arsenic (III and V) on oxidative stress parameters in resistant and susceptible Staphylococcus aureus.

The presented study deals with the observation of properties of methicillin-susceptible Staphylococcus aureus (MSSA) and methicillin-resistant S. aureus (MRSA) in the toxic arsenic environment and influence of arsenic on antioxidant capacity. Two forms of arsenic (As(III), As(V)) with different concentrations were used for induction of the oxidative stress in tested strains. Microbiological methods showed that the growth inhibition of MSSA was higher than that of MRSA in presence of both arsenic ions. As(III) showed 24% and 33% higher anti-microbial effects than As(V) against MSSA and MRSA respectively. A similar result was found also in the experiment of reduction of biofilm-formation. By using spectrophotometry, it was revealed that As(III) induced higher antioxidant production in both bacterial cultures. Methicillin-susceptible S. aureus produced an app. 50 mg equivalent of gallic acid (GAE/1 mg of protein) and MRSA produced an app. 15 mg of GAE/1 mg of protein. The productions of metallothionein in MSSA and MRSA were decreased up to 62.41% and 55.84% respectively in presence of As ions. Reduction of As(III) and As(V) concentrations leads to a decrease in antioxidant production and increased the formation of metallothionein. All of these changes in the results were found to be significant statistically. Taken together, these experiments proved that in comparison with MSSA, MRSA is less susceptible not only to the antimicrobial effects of antibiotics but also against effects caused by metalloids, as arsenic. Thus, it can be stated that MRSA abounds with complex defensive mechanisms, which may in the future constitute significant problem in the efficiency of antibiotics alternatives as metal ions or nanoparticles.

DNA interaction with platinum-based cytostatics revealed by DNA sequencing.

The main mechanism of action of platinum-based cytostatic drugs - cisplatin, oxaliplatin and carboplatin - is the formation of DNA cross-links, which restricts the transcription due to the disability of DNA to enter the active site of the polymerase. The polymerase chain reaction (PCR) was employed as a simplified model of the amplification process in the cell nucleus. PCR with fluorescently labelled dideoxynucleotides commonly employed for DNA sequencing was used to monitor the effect of platinum-based cytostatics on DNA in terms of decrease in labeling efficiency dependent on a presence of the DNA-drug cross-link. It was found that significantly different amounts of the drugs - cisplatin (0.21 µg/mL), oxaliplatin (5.23 µg/mL), and carboplatin (71.11 µg/mL) - were required to cause the same quenching effect (50%) on the fluorescent labelling of 50 µg/mL of DNA. Moreover, it was found that even though the amounts of the drugs was applied to the reaction mixture differing by several orders of magnitude, the amount of incorporated platinum, quantified by inductively coupled plasma mass spectrometry, was in all cases at the level of tenths of µg per 5 µg of DNA.

Amalgam Electrode-Based Electrochemical Detector for On-Site Direct Determination of Cadmium(II) and Lead(II) from Soils.

Toxic metal contamination of the environment is a global issue. In this paper, we present a low-cost and rapid production of amalgam electrodes used for determination of Cd(II) and Pb(II) in environmental samples (soils and wastewaters) by on-site analysis using difference pulse voltammetry. Changes in the electrochemical signals were recorded with a miniaturized potentiostat (width: 80 mm, depth: 54 mm, height: 23 mm) and a portable computer. The limit of detection (LOD) was calculated for the geometric surface of the working electrode 15 mm² that can be varied as required for analysis. The LODs were 80 ng·mL-1 for Cd(II) and 50 ng·mL-1 for Pb(II), relative standard deviation, RSD ≤ 8% (n = 3). The area of interest (Dolni Rozinka, Czech Republic) was selected because there is a deposit of uranium ore and extreme anthropogenic activity. Environmental samples were taken directly on-site and immediately analysed. Duration of a single analysis was approximately two minutes. The average concentrations of Cd(II) and Pb(II) in this area were below the global average. The obtained values were verified (correlated) by standard electrochemical methods based on hanging drop electrodes and were in good agreement. The advantages of this method are its cost and time effectivity (approximately two minutes per one sample) with direct analysis of turbid samples (soil leach) in a 2 M HNO3 environment. This type of sample cannot be analyzed using the classical analytical methods without pretreatment.

Synthesis and Modification of Clinoptilolite.

Clinoptilolite is a natural mineral with exceptional physical characteristics resulting from its special crystal structure, mainstreamed into a large zeolite group called heulandites. An overall view of the research related to the synthesis, modification and application of synthetic clinoptilolite is presented. A single phase of clinoptilolite can be hydrothermally synthesized for 1-10 days in an autoclave from various silica, alumina, and alkali sources with initial Si/Al ratio from 3.0 to 5.0 at a temperature range from 120 to 195 °C. Crystallization rate and crystallinity of clinoptilolite can be improved by seeding. The modification of clinoptilolite has received noticeable attention from the research community, since modified forms have specific properties and therefore their area of application has been broadening. This paper provides a review of the use of organic compounds such as quarter alkyl ammonium, polymer, amine and inorganic species used in the modification process, discusses the processes and mechanisms of clinoptilolite modification, and identifies research gaps and new perspectives.

Anticarcinogenic Effect of Spices Due to Phenolic and Flavonoid Compounds-In Vitro Evaluation on Prostate Cells.

This study shows the effects of spices, and their phenolic and flavonoid compounds, on prostate cell lines (PNT1A, 22RV1 and PC3). The results of an MTT assay on extracts from eight spices revealed the strongest inhibitory effects were from black pepper and caraway seed extracts. The strongest inhibitory effect on prostatic cells was observed after the application of extracts of spices in concentration of 12.5 mg·mL-1. An LC/MS analysis identified that the most abundant phenolic and flavonoid compounds in black pepper are 3,4-dihydroxybenzaldehyde and naringenin chalcone, while the most abundant phenolic and flavonoid compounds in caraway seeds are neochlorogenic acid and apigenin. Using an MTT assay for the phenolic and flavonoid compounds from spices, we identified the IC50 value of ~1 mmol·L-1 PNT1A. The scratch test demonstrated that the most potent inhibitory effect on PNT1A, 22RV1 and PC3 cells is from the naringenin chalcone contained in black pepper. From the spectrum of compounds assessed, the naringenin chalcone contained in black pepper was identified as the most potent inhibitor of the growth of prostate cells.

Changes in the oxidative stress/anti-oxidant system after exposure to sulfur mustard and antioxidant strategies in the therapy, a review.

Sulfur mustard, in a chemical name bis(2-chloroethyl) sulfide, is a chemical warfare agent. It is cytotoxic and blister forming once spread over the skin. Though exact molecular mechanism of sulfur mustard toxic action remains unknown, inflammation and oxidative stress development are considered as the most relevant pathological consequences. Applications of either low-molecular weight antioxidants or cofactors for enzymatic antioxidants are considered as suitable ways how to ameliorate the poisoning. In this article, survey of literature on countermeasures against sulfur mustard poisoning are given and evidence of oxidative stress role during sulfur mustard poisoning and availability of antioxidants for the therapy are discussed.

A 3D microfluidic chip for electrochemical detection of hydrolysed nucleic bases by a modified glassy carbon electrode.

Modification of carbon materials, especially graphene-based materials, has wide applications in electrochemical detection such as electrochemical lab-on-chip devices. A glassy carbon electrode (GCE) modified with chemically alternated graphene oxide was used as a working electrode (glassy carbon modified by graphene oxide with sulphur containing compounds and Nafion) for detection of nucleobases in hydrolysed samples (HCl pH = 2.9, 100 °C, 1 h, neutralization by NaOH). It was found out that modification, especially with trithiocyanuric acid, increased the sensitivity of detection in comparison with pure GCE. All processes were finally implemented in a microfluidic chip formed with a 3D printer by fused deposition modelling technology. As a material for chip fabrication, acrylonitrile butadiene styrene was chosen because of its mechanical and chemical stability. The chip contained the one chamber for the hydrolysis of the nucleic acid and another for the electrochemical detection by the modified GCE. This chamber was fabricated to allow for replacement of the GCE.

Study of linkage between glutathione pathway and the antibiotic resistance of Escherichia coli from patients' swabs.

In this work, we focused on the differences between bacterial cultures of E. coli obtained from swabs of infectious wounds of patients compared to laboratory E. coli. In addition, blocking of the protein responsible for the synthesis of glutathione (γ-glutamylcysteine synthase-GCL) using 10 mM buthionine sulfoximine was investigated. Each E. coli showed significant differences in resistance to antibiotics. According to the determined resistance, E. coli were divided into experimental groups based on a statistical evaluation of their properties as more resistant and more sensitive. These groups were also used for finding the differences in a dependence of the glutathione pathway on resistance to antibiotics. More sensitive E. coli showed the same kinetics of glutathione synthesis while blocking GCL (Km 0.1 µM), as compared to non-blocking. In addition, the most frequent mutations in genes of glutathione synthetase, glutathione peroxidase and glutathione reductase were observed in this group compared to laboratory E.coli. The group of "more resistant" E. coli exhibited differences in Km between 0.3 and 0.8 µM. The number of mutations compared to the laboratory E. coli was substantially lower compared to the other group.

Simultaneous automatic electrochemical detection of zinc, cadmium, copper and lead ions in environmental samples using a thin-film mercury electrode and an artificial neural network.

In this study a device for automatic electrochemical analysis was designed. A three electrodes detection system was attached to a positioning device, which enabled us to move the electrode system from one well to another of a microtitre plate. Disposable carbon tip electrodes were used for Cd(II), Cu(II) and Pb(II) ion quantification, while Zn(II) did not give signal in this electrode configuration. In order to detect all mentioned heavy metals simultaneously, thin-film mercury electrodes (TFME) were fabricated by electrodeposition of mercury on the surface of carbon tips. In comparison with bare electrodes the TMFEs had lower detection limits and better sensitivity. In addition to pure aqueous heavy metal solutions, the assay was also performed on mineralized rock samples, artificial blood plasma samples and samples of chicken embryo organs treated with cadmium. An artificial neural network was created to evaluate the concentrations of the mentioned heavy metals correctly in mixture samples and an excellent fit was observed (R2 = 0.9933).

Rapid superparamagnetic-beads-based automated immunoseparation of Zn-proteins from Staphylococcus aureus with nanogram yield.

Pathogenic bacteria have become a serious socio-economic concern. Immunomagnetic separation-based methods create new possibilities for rapidly recognizing many of these pathogens. The aim of this study was to use superparamagnetic particles-based fully automated instrumentation to isolate pathogen Staphylococcus aureus and its Zn(II) containing proteins (Zn-proteins). The isolated bacteria were immediately purified and disintegrated prior to immunoextraction of Zn-proteins by superparamagnetic beads modified with chicken anti-Zn(II) antibody. S. aureus culture was treated with ZnCl(2). Optimal pathogen isolation and subsequent disintegration assay steps were carried out with minimal handling. (i) Optimization of bacteria capturing: Superparamagnetic microparticles composed of human IgG were used as the binding surface for acquiring live S. aureus. The effect of antibodies concentration, ionic strength, and incubation time was concurrently investigated. (ii) Optimization of zinc proteins isolation: pure and intact bacteria isolated by the optimized method were sonicated. The extracts obtained were subsequently analyzed using superparamagnetic particles modified with chicken antibody against zinc(II) ions. (iii) Moreover, various types of bacterial zinc(II) proteins precipitations from particle-surface interactions were tested and associated protein profiles were identified using SDS-PAGE. Use of a robotic pipetting system sped up sample preparation to less than 4 h. Cell lysis and Zn-protein extractions were obtained from a minimum of 100 cells with sufficient yield for SDS-PAGE (tens ng of proteins). Zn(II) content and cell count in the extracts increased exponentially. Furthermore, Zn(II) and proteins balances were determined in cell lysate, extract, and retentate.

Microfluidic chip coupled with modified paramagnetic particles for sarcosine isolation in urine.

Carcinoma of prostate (CaP) is the second most frequent malignant tumor occurring in men in Europe. Currently there is discussion on a wide range of potential CaP markers.One of them­nonprotein amino acid sarcosine, also known as N-methylglycine was chosen as a challenge for the development of microfluidic system with isolation by modified paramagnetic microparticles. Therefore, the aim of this study was to design a low-cost, simple, and rapid microfluidic system based on sarcosine isolation with modified paramagnetic microparticles and subsequent analysis on the ion exchange LC. We modified Dowex microparticles with Fe2O3 nanoparticles. Our paramagnetic microparticles were able to establish the binding with sarcosine. Moreover, we designed microfluidic device for sarcosine determination. Analysis of samples was carried out with LOD of1 M of a sarcosine that is sufficient because it is similar to concentrations of a sarcosine observed in the CaP patients.Carcinoma of prostate (CaP) is the second most frequent malignant tumor occurring in men in Europe. Currently there is discussion on a wide range of potential CaP markers.One of them­nonprotein amino acid sarcosine, also known as N-methylglycine was chosen as a challenge for the development of microfluidic system with isolation by modified paramagnetic microparticles. Therefore, the aim of this study was to design a low-cost, simple, and rapid microfluidic system based on sarcosine isolation with modified paramagnetic microparticles and subsequent analysis on the ion exchange LC. We modified Dowex microparticles with Fe2O3 nanoparticles. Our paramagnetic microparticles were able to establish the binding with sarcosine. Moreover, we designed microfluidic device for sarcosine determination. Analysis of samples was carried out with LOD of1 M of a sarcosine that is sufficient because it is similar to concentrations of a sarcosine observed in the CaP patients.

Behaviour of zinc complexes and zinc sulphide nanoparticles revealed by using screen printed electrodes and spectrometry.

In this study, we focused on microfluidic electrochemical analysis of zinc complexes (Zn(phen)(his)Cl2, Zn(his)Cl2) and ZnS quantum dots (QDs) using printed electrodes. This method was chosen due to the simple (easy to use) instrumentation and variable setting of flows. Reduction signals of zinc under the strictly defined and controlled conditions (pH, temperature, flow rate, accumulation time and applied potential) were studied. We showed that the increasing concentration of the complexes (Zn(phen)(his)Cl2, Zn(his)Cl2) led to a decrease in the electrochemical signal and a significant shift of the potential to more positive values. The most likely explanation of this result is that zinc is strongly bound in the complex and its distribution on the electrode is very limited. Changing the pH from 3.5 to 5.5 resulted in a significant intensification of the Zn(II) reduction signal. The complexes were also characterized by UV/VIS spectrophotometry, chromatography, and ESI-QTOF mass spectrometry.

Complexes of silver(I) ions and silver phosphate nanoparticles with hyaluronic acid and/or chitosan as promising antimicrobial agents for vascular grafts.

Polymers are currently widely used to replace a variety of natural materials with respect to their favourable physical and chemical properties, and due to their economic advantage. One of the most important branches of application of polymers is the production of different products for medical use. In this case, it is necessary to face a significant disadvantage of polymer products due to possible and very common colonization of the surface by various microorganisms that can pose a potential danger to the patient. One of the possible solutions is to prepare polymer with antibacterial/antimicrobial properties that is resistant to bacterial colonization. The aim of this study was to contribute to the development of antimicrobial polymeric material ideal for covering vascular implants with subsequent use in transplant surgery. Therefore, the complexes of polymeric substances (hyaluronic acid and chitosan) with silver nitrate or silver phosphate nanoparticles were created, and their effects on gram-positive bacterial culture of Staphylococcus aureus were monitored. Stages of formation of complexes of silver nitrate and silver phosphate nanoparticles with polymeric compounds were characterized using electrochemical and spectrophotometric methods. Furthermore, the antimicrobial activity of complexes was determined using the methods of determination of growth curves and zones of inhibition. The results of this study revealed that the complex of chitosan, with silver phosphate nanoparticles, was the most suitable in order to have an antibacterial effect on bacterial culture of Staphylococcus aureus. Formation of this complex was under way at low concentrations of chitosan. The results of electrochemical determination corresponded with the results of spectrophotometric methods and verified good interaction and formation of the complex. The complex has an outstanding antibacterial effect and this effect was of several orders higher compared to other investigated complexes.

The impacts of mining on soil pollution with metal(loid)s in resource-rich Mongolia.

As Mongolia is considered one of the most resource extraction-dependent countries globally, significant mining-related environmental and human health risks are expected. The aim of this study was to (I) assess the impacts of mining on soil pollution with metals in Mongolia's key coal mining towns (Baganuur, Nalaikh and Sharyn Gol) and (II) review the current knowledge on soil pollution with metal(loid)s and related health risks in Mongolia. The results showed predominantly low soil contents of Cd, Cu, Pb and Zn and a related absence of severe pollution and potential health risk in the coal mining towns. Urban design, rather than the presence of mines, controlled the pollution distribution. Despite the methodological shortcomings of several studies on soil pollution in Mongolia, their results suggest a similarly low threat in the three largest cities (Ulaanbaatar, Darkhan, Erdenet) and several mining areas. While the generally highlighted risk of As seems like an artificially escalated issue, the content of Cr in urban soil may be a neglected threat. Further pollution research in Mongolia should focus on street dust and drinking water pollution.

Bio-sensing of cadmium(II) ions using Staphylococcus aureus.

Cadmium, as a hazardous pollutant commonly present in the living environment, represents an important risk to human health due to its undesirable effects (oxidative stress, changes in activities of many enzymes, interactions with biomolecules including DNA and RNA) and consequent potential risk, making its detection very important. New and unique technological and biotechnological approaches for solving this problems are intensely sought. In this study, we used the commonly occurring potential pathogenic microorganism Staphylococcus aureus for the determination of markers which could be used for sensing of cadmium(II) ions. We were focused on monitoring the effects of different cadmium(II) ion concentrations (0, 1.25, 2.5, 5, 10, 15, 25 and 50 µg mL(-1)) on the growth and energetic metabolism of Staphylococcus aureus. Highly significant changes have been detected in the metabolism of thiol compounds-specifically the protein metallothionein (0.79-26.82 mmol/mg of protein), the enzyme glutathione S-transferase (190-5,827 µmol/min/mg of protein), and sulfhydryl groups (9.6-274.3 µmol cysteine/mg of protein). The ratio of reduced and oxidized glutathione indicated marked oxidative stress. In addition, dramatic changes in urease activity, which is connected with resistance of bacteria, were determined. Further, the effects of cadmium(II) ions on the metabolic pathways of arginine, ß-glucosidase, phosphatase, N-acetyl ß-d-glucosamine, sucrose, trehalose, mannitol, maltose, lactose, fructose and total proteins were demonstrated. A metabolomic profile of Staphylococcus aureus under cadmium(II) ion treatment conditions was completed seeking data about the possibility of cadmium(II) ion accumulation in cells. The results demonstrate potential in the application of microorganisms as modern biosensor systems based on biological components.

Human health and ecological risk assessment of trace elements in urban soils of 101 cities in China: A meta-analysis.

Urban soils pollution by trace elements arouses the growing interest in China. The aim of this study was to assess urban soil pollution by As, Cd, Cr, Cu, Hg, Ni, Pb and Zn in China and the possible impacts on urban inhabitants and urban green spaces (UGS). Data from more than 17,000 samples were applied to characterize the status of 101 cities. The pollution assessment proved that 11% of the cities are heavily polluted. According to the Hazard Index, the value of risk for the infant population in 15 cities exceed the standardly accepted tolerable levels. The carcinogenic risk assessment demonstrated the potential threat in the cities with the total population approximately 20,566,900. Cr and As were detected to be the most hazardous elements. UGS may be seriously threatened by trace elements toxicity in 38 cities. Cd was found to be the riskiest element for UGS. Ecosystem services of UGS can be significantly disrupted under the current situation in China and their status is expected to deteriorate in the future. For this reason, it is essential to alter the policy of the urbanization process and develop functional concepts of urban green infrastructures adapted to the high level of contamination which shall improve human well-being in China.

The impact of tourism on extremely visited volcanic island: Link between environmental pollution and transportation modes.

The enormous tourism boom raises concern about possible negative environmental impacts worldwide. One of the risks posed by tourism may be heavy metal pollution. On the example of the volcanic island of Santorini, a popular tourist destination, pollution of soils categorized according to the tourism load was monitored. Significant anthropogenic contamination by heavy metals, especially Cu, Cr and Pb, was found out. This contamination may constitute a moderate ecological risk to the island ecosystems. Tourism has been shown to be a significant pollution factor as evidenced by the contaminated soils near the airport. Simultaneously, airport traffic has been proved to be an important emitter of Co, Cr and especially Zn. The comparison with other volcanic islands has shown that on Santorini the content of heavy metals in soils is significantly lower, despite frequently higher tourism intensity. On this basis, it can be concluded that in case of volcanic islands the dominant factor determining the content of heavy metals in the soil is the parent rock. Given high and ever-increasing intensity of tourism on the island, it can be assumed that soil contamination will continue to rise rapidly. Therefore, without proper steps reducing tourism, increase in soil degradation, growing negative impacts on local ecosystems as well as on the quality of produced wine can be expected on Santorini.

Adsorption of rare earth elements in regolith-hosted clay deposits.

Global resources of heavy Rare Earth Elements (REE) are dominantly sourced from Chinese regolith-hosted ion-adsorption deposits in which the REE are inferred to be weakly adsorbed onto clay minerals. Similar deposits elsewhere might provide alternative supply for these high-tech metals, but the adsorption mechanisms remain unclear and the adsorbed state of REE to clays has never been demonstrated in situ. This study compares the mineralogy and speciation of REE in economic weathering profiles from China to prospective regoliths developed on peralkaline rocks from Madagascar. We use synchrotron X-ray absorption spectroscopy to study the distribution and local bonding environment of Y and Nd, as proxies for heavy and light REE, in the deposits. Our results show that REE are truly adsorbed as easily leachable 8- to 9-coordinated outer-sphere hydrated complexes, dominantly onto kaolinite. Hence, at the atomic level, the Malagasy clays are genuine mineralogical analogues to those currently exploited in China.