An allosteric redox switch involved in oxygen protection in a CO2 reductase.

Metal-dependent formate dehydrogenases reduce CO2 with high efficiency and selectivity, but are usually very oxygen sensitive. An exception is Desulfovibrio vulgaris W/Sec-FdhAB, which can be handled aerobically, but the basis for this oxygen tolerance was unknown. Here we show that FdhAB activity is controlled by a redox switch based on an allosteric disulfide bond. When this bond is closed, the enzyme is in an oxygen-tolerant resting state presenting almost no catalytic activity and very low formate affinity. Opening this bond triggers large conformational changes that propagate to the active site, resulting in high activity and high formate affinity, but also higher oxygen sensitivity. We present the structure of activated FdhAB and show that activity loss is associated with partial loss of the metal sulfido ligand. The redox switch mechanism is reversible in vivo and prevents enzyme reduction by physiological formate levels, conferring a fitness advantage during O2 exposure.

Kinetic Modeling of the Reversible or Irreversible Electrochemical Responses of FeFe-Hydrogenases.

The enzyme FeFe-hydrogenase catalyzes H2 evolution and oxidation at an active site that consists of a [4Fe-4S] cluster bridged to a [Fe2(CO)3(CN)2(azadithiolate)] subsite. Previous investigations of its mechanism were mostly conducted on a few "prototypical" FeFe-hydrogenases, such as that from Chlamydomonas reinhardtii(Cr HydA1), but atypical hydrogenases have recently been characterized in an effort to explore the diversity of this class of enzymes. We aim at understanding why prototypical hydrogenases are active in either direction of the reaction in response to a small deviation from equilibrium, whereas the homologous enzyme from Thermoanaerobacter mathranii (Tam HydS) shows activity only under conditions of very high driving force, a behavior that was referred to as "irreversible catalysis". We follow up on previous spectroscopic studies and recent developments in the kinetic modeling of bidirectional reactions to investigate and compare the catalytic cycles of Cr HydA1 and Tam HydS under conditions of direct electron transfer with an electrode. We compare the hypothetical catalytic cycles described in the literature, and we show that the observed changes in catalytic activity as a function of potential, pH, and H2 concentration can be explained with the assumption that the same catalytic mechanism applies. This helps us identify which variations in properties of the catalytic intermediates give rise to the distinct "reversible" or "irreversible" catalytic behaviors.

Second and Outer Coordination Sphere Effects in Nitrogenase, Hydrogenase, Formate Dehydrogenase, and CO Dehydrogenase.

Gases like H2, N2, CO2, and CO are increasingly recognized as critical feedstock in "green" energy conversion and as sources of nitrogen and carbon for the agricultural and chemical sectors. However, the industrial transformation of N2, CO2, and CO and the production of H2 require significant energy input, which renders processes like steam reforming and the Haber-Bosch reaction economically and environmentally unviable. Nature, on the other hand, performs similar tasks efficiently at ambient temperature and pressure, exploiting gas-processing metalloenzymes (GPMs) that bind low-valent metal cofactors based on iron, nickel, molybdenum, tungsten, and sulfur. Such systems are studied to understand the biocatalytic principles of gas conversion including N2 fixation by nitrogenase and H2 production by hydrogenase as well as CO2 and CO conversion by formate dehydrogenase, carbon monoxide dehydrogenase, and nitrogenase. In this review, we emphasize the importance of the cofactor/protein interface, discussing how second and outer coordination sphere effects determine, modulate, and optimize the catalytic activity of GPMs. These may comprise ionic interactions in the second coordination sphere that shape the electron density distribution across the cofactor, hydrogen bonding changes, and allosteric effects. In the outer coordination sphere, proton transfer and electron transfer are discussed, alongside the role of hydrophobic substrate channels and protein structural changes. Combining the information gained from structural biology, enzyme kinetics, and various spectroscopic techniques, we aim toward a comprehensive understanding of catalysis beyond the first coordination sphere.

A Chimeric NiFe Hydrogenase Heterodimer to Assess the Role of the Electron Transfer Chain in Tuning the Enzyme's Catalytic Bias and Oxygen Tolerance.

The observation that some homologous enzymes have the same active site but very different catalytic properties demonstrates the importance of long-range effects in enzyme catalysis, but these effects are often difficult to rationalize. The NiFe hydrogenases 1 and 2 (Hyd 1 and Hyd 2) from E. coli both consist of a large catalytic subunit that embeds the same dinuclear active site and a small electron-transfer subunit with a chain of three FeS clusters. Hyd 1 is mostly active in H2 oxidation and resistant to inhibitors, whereas Hyd 2 also catalyzes H2 production and is strongly inhibited by O2 and CO. Based on structural and site-directed mutagenesis data, it is currently believed that the catalytic bias and tolerance to O2 of Hyd 1 are defined by the distal and proximal FeS clusters, respectively. To test these hypotheses, we produced and characterized a hybrid enzyme made of the catalytic subunit of Hyd 1 and the electron transfer subunit of Hyd 2. We conclude that catalytic bias and sensitivity to CO are set by the catalytic subunit rather than by the electron transfer chain. We confirm the importance of the proximal cluster in making the enzyme Hyd 1 resist long-term exposure to O2, but we show that other structural determinants, in both subunits, contribute to O2 tolerance. A similar strategy based on the design of chimeric heterodimers could be used in the future to elucidate various structure-function relationships in hydrogenases and other multimeric metalloenzymes and to engineer useful hydrogenases that combine the desirable properties of distinct, homologous enzymes.

Light-Driven Hydrogen Evolution Reaction Catalyzed by a Molybdenum-Copper Artificial Hydrogenase.

Orange protein (Orp) is a small bacterial metalloprotein of unknown function that harbors a unique molybdenum/copper (Mo/Cu) heterometallic cluster, [S2MoS2CuS2MoS2]3-. In this paper, the performance of Orp as a catalyst for the photocatalytic reduction of protons into H2 has been investigated under visible light irradiation. We report the complete biochemical and spectroscopic characterization of holo-Orp containing the [S2MoS2CuS2MoS2]3- cluster, with docking and molecular dynamics simulations suggesting a positively charged Arg, Lys-containing pocket as the binding site. Holo-Orp exhibits excellent photocatalytic activity, in the presence of ascorbate as the sacrificial electron donor and [Ru(bpy)3]Cl2 as the photosensitizer, for hydrogen evolution with a maximum turnover number of 890 after 4 h irradiation. Density functional theory (DFT) calculations were used to propose a consistent reaction mechanism in which the terminal sulfur atoms are playing a key role in promoting H2 formation. A series of dinuclear [S2MS2M'S2MS2](4n)- clusters, with M = MoVI, WVI and M'(n+) = CuI, FeI, NiI, CoI, ZnII, CdII were assembled in Orp, leading to different M/M'-Orp versions which are shown to display catalytic activity, with the Mo/Fe-Orp catalyst giving a remarkable turnover number (TON) of 1150 after 2.5 h reaction and an initial turnover frequency (TOF°) of 800 h-1 establishing a record among previously reported artificial hydrogenases.

Assessing the Extent of Potential Inversion by Cyclic Voltammetry: Theory, Pitfalls, and Application to a Nickel Complex with Redox-Active Iminosemiquinone Ligands.

Potential inversion refers to the situation where a protein cofactor or a synthetic molecule can be oxidized or reduced twice in a cooperative manner; that is, the second electron transfer is easier than the first. This property is very important regarding the catalytic mechanism of enzymes that bifurcate electrons and the properties of bidirectional redox molecular catalysts that function in either direction of the reaction with no overpotential. Cyclic voltammetry is the most common technique for characterizing the thermodynamics and kinetics of electron transfer to or from these molecules. However, a gap in the literature is the absence of analytical predictions to help interpret the values of the voltammetric peak potentials when potential inversion occurs; the cyclic voltammograms are therefore often analyzed by simulating the data, with no discussion of the possibility of overfitting and often no estimation of the error on the determined parameters. Here we formulate the theory for the voltammetry of freely diffusing or surface-confined two-electron redox species in the experimentally relevant irreversible limit where the peak separation depends on the scan rate. We explain why the model is intrinsically underdetermined, and we illustrate this conclusion by analysis of the voltammetry of a nickel complex with redox-active iminosemiquinone ligands. Being able to characterize the thermodynamics of two-electron electron-transfer reactions will be crucial for designing more efficient catalysts.

Electrochemical Kinetics Support a Second Coordination Sphere Mechanism in Metal-Based Formate Dehydrogenase.

Metal-based formate dehydrogenases are molybdenum or tungsten-dependent enzymes that catalyze the interconversion between formate and CO2 . According to the current consensus, the metal ion of the catalytic center in its active form is coordinated by 6 S (or 5 S and 1 Se) atoms, leaving no free coordination sites to which formate could bind to the metal. Some authors have proposed that one of the active site ligands decoordinates during turnover to allow formate binding. Another proposal is that the oxidation of formate takes place in the second coordination sphere of the metal. Here, we have used electrochemical steady-state kinetics to elucidate the order of the steps in the catalytic cycle of two formate dehydrogenases. Our results strongly support the "second coordination sphere" hypothesis.

Reversible or Irreversible Catalysis of H+/H2 Conversion by FeFe Hydrogenases.

Studies of molecular catalysts traditionally aim at understanding how a certain mechanism allows the reaction to be fast. A distinct question, which has only recently received attention in the case of bidirectional molecular catalysts, is how much thermodynamic driving force is required to achieve fast catalysis in either direction of the reaction. "Reversible" catalysts are bidirectional catalysts that work either way in response to even a small departure from equilibrium and thus do not waste input free energy as heat; conversely, "irreversible" catalysts require a large driving force to proceed at an appreciable rate [Fourmond et al. Nat. Rev. Chem. 2021, 5, 348-360]. Numerous mechanistic rationales for these contrasting behaviors have been proposed. To understand the determinants of catalytic (ir)reversibility, we examined the steady-state, direct electron transfer voltammetry of a particular FeFe hydrogenase, from Thermoanaerobacter mathranii, which is very unusual in that it irreversibly catalyzes H2 oxidation and production: a large overpotential is required for the reaction to proceed in either direction [Land et al. Chem. Sci. 2020, 11, 12789-12801]. In contrast to previous hypotheses, we demonstrate that in this particular enzyme catalytic irreversibility can be explained without invoking slow interfacial electron transfer or variations in the mechanism: the observed kinetics is fully consistent with the same catalytic pathway being used in both directions of the reaction.

Electrochemical Studies of CO2 -Reducing Metalloenzymes.

Only two enzymes are capable of directly reducing CO2 : CO dehydrogenase, which produces CO at a [NiFe4 S4 ] active site, and formate dehydrogenase, which produces formate at a mononuclear W or Mo active site. Both metalloenzymes are very rapid, energy-efficient and specific in terms of product. They have been connected to electrodes with two different objectives. A series of studies used protein film electrochemistry to learn about different aspects of the mechanism of these enzymes (reactivity with substrates, inhibitors…). Another series focused on taking advantage of the catalytic performance of these enzymes to build biotechnological devices, from CO2 -reducing electrodes to full photochemical devices performing artificial photosynthesis. Here, we review all these works.

Formate Dehydrogenases Reduce CO2 Rather than HCO3- : An Electrochemical Demonstration.

Mo/W formate dehydrogenases catalyze the reversible reduction of CO2 species to formate. It is thought that the substrate is CO2 and not a hydrated species like HCO3- , but there is still no indisputable evidence for this, in spite of the extreme importance of the nature of the substrate for mechanistic studies. We devised a simple electrochemical method to definitively demonstrate that the substrate of formate dehydrogenases is indeed CO2 .

Structural insight into metallocofactor maturation in carbon monoxide dehydrogenase.

The nickel-dependent carbon monoxide dehydrogenase (CODH) employs a unique heterometallic nickel-iron-sulfur cluster, termed the C-cluster, to catalyze the interconversion of CO and CO2 Like other complex metalloenzymes, CODH requires dedicated assembly machinery to form the fully intact and functional C-cluster. In particular, nickel incorporation into the C-cluster depends on the maturation factor CooC; however, the mechanism of nickel insertion remains poorly understood. Here, we compare X-ray structures (1.50-2.48 Å resolution) of CODH from Desulfovibrio vulgaris (DvCODH) heterologously expressed in either the absence (DvCODH-CooC) or presence (DvCODH+CooC) of co-expressed CooC. We find that the C-cluster of DvCODH-CooC is fully loaded with iron but does not contain any nickel. Interestingly, the so-called unique iron ion (Feu) occupies both its canonical site (80% occupancy) and the nickel site (20% occupancy), with addition of reductant causing further mismetallation of the nickel site (60% iron occupancy). We also demonstrate that a DvCODH variant that lacks a surface-accessible iron-sulfur cluster (the D-cluster) has a C-cluster that is also replete in iron but lacks nickel, despite co-expression with CooC. In this variant, all Feu is in its canonical location, and the nickel site is empty. This D-cluster-deficient CODH is inactive despite attempts to reconstitute it with nickel. Taken together, these results suggest that an empty nickel site is not sufficient for nickel incorporation. Based on our findings, we propose a model for C-cluster assembly that requires both CooC and a functioning D-cluster, involves precise redox-state control, and includes a two-step nickel-binding process.

Complete Protection of O2-Sensitive Catalysts in Thin Films.

Energy conversion schemes involving dihydrogen hold great potential for meeting sustainable energy needs, but widespread implementation cannot proceed without solutions that mitigate the cost of rare metal catalysts and the O2 instability of biological and bioinspired replacements. Recently, thick films (>100 µm) of redox polymers were shown to prevent O2 catalyst damage but also resulted in unnecessary catalyst load and mass transport limitations. Here we apply novel homogeneous thin films (down to 3 µm) that provide protection from O2 while achieving highly efficient catalyst utilization. Our empirical data are explained by modeling, demonstrating that resistance to O2 inactivation can be obtained for nonlimiting periods of time when the optimal thickness for catalyst utilization and current generation is achieved, even when using highly fragile catalysts such as the enzyme hydrogenase. We show that different protection mechanisms operate depending on the matrix dimensions and the intrinsic catalyst properties and can be integrated together synergistically to achieve stable H2 oxidation currents in the presence of O2, potentially enabling a plethora of practical applications for bioinspired catalysts under harsh oxidative conditions.

Understanding and Design of Bidirectional and Reversible Catalysts of Multielectron, Multistep Reactions.

Some enzymes, including those that are involved in the activation of small molecules such as H2 or CO2, can be wired to electrodes and function in either direction of the reaction depending on the electrochemical driving force and display a significant rate at very small deviations from the equilibrium potential. We call the former property "bidirectionality" and the latter "reversibility". This performance sets very high standards for chemists who aim at designing synthetic electrocatalysts. Only recently, in the particular case of the hydrogen production/evolution reaction, has it been possible to produce inorganic catalysts that function bidirectionally, with an even smaller number that also function reversibly. This raises the question of how to engineer such desirable properties in other synthetic catalysts. Here we introduce the kinetic modeling of bidirectional two-electron-redox reactions in the case of molecular catalysts and enzymes that are either attached to an electrode or diffusing in solution in the vicinity of an electrode. We emphasize that trying to discuss bidirectionality and reversibility in relation to a single redox potential leads to an impasse: the catalyst undergoes two redox transitions, and therefore two catalytic potentials must be defined, which may depart from the two potentials measured in the absence of catalysis. The difference between the two catalytic potentials defines the reversibility; the difference between their average value and the equilibrium potential defines the directionality (also called "preference", or "bias"). We describe how the sequence of events in the bidirectional catalytic cycle can be elucidated on the basis of the voltammetric responses. Further, we discuss the design principles of bidirectionality and reversibility in terms of thermodynamics and kinetics and conclude that neither bidirectionality nor reversibility requires that the catalytic energy landscape be flat. These theoretical findings are illustrated by previous results obtained with nickel diphosphine molecular catalysts and hydrogenases. In particular, analysis of the nickel catalysts highlights the fact that reversible catalysis can be achieved by catalysts that follow complex mechanisms with branched reaction pathways.

Electrochemical Investigations of Hydrogenases and Other Enzymes That Produce and Use Solar Fuels.

Many enzymes that produce or transform small molecules such as O2, H2, and CO2 embed inorganic cofactors based on transition metals. Their active site, where the chemical reaction occurs, is buried in and protected by the protein matrix, and connected to the solvent in several ways: chains of redox cofactors mediate long-range electron transfer; static or dynamic tunnels guide the substrate, product and inhibitors; amino acids and water molecules transfer protons. The catalytic mechanism of these enzymes is therefore delocalized over the protein and involves many different steps, some of which determine the response of the enzyme under conditions of stress (extreme redox conditions, presence of inhibitors, light), the catalytic rates in the two directions of the reaction and their ratio (the "catalytic bias"). Understanding all the steps in the catalytic cycle, including those that occur on sites of the protein that are remote from the active site, requires a combination of biochemical, structural, spectroscopic, theoretical, and kinetic methods. Here we argue that kinetics should be used to the fullest extent, by extracting quantitative information from the comparison of data and kinetic models and by exploring the combination of experimental kinetics and theoretical chemistry. In studies of these catalytic mechanisms, direct electrochemistry, the technique which we use and contribute to develop, has become unescapable. It simply consists in monitoring the changes in activity of an enzyme that is wired to an electrode by recording an electric current. We have described kinetic models that can be used to make sense of these data and to learn about various aspects of the mechanism that are difficult to probe using more conventional methods: long-range electron transfer, diffusion along gas channels, redox-driven (in)activations, active site chemistry and photoreactivity under conditions of turnover. In this Account, we highlight a few results that illustrate our approach. We describe how electrochemistry can be used to monitor substrate and inhibitor diffusion along the gas channels of hydrogenases and we discuss how the kinetics of intramolecular diffusion relates to global properties such as resistance to oxygen and catalytic bias. The kinetics and/or thermodynamics of intramolecular electron transfer may also affect the catalytic bias, the catalytic potentials on either side of the equilibrium potential, and the overpotentials for catalysis (defined as the difference between the catalytic potentials and the open circuit potential). This is understood by modeling the shape of the steady-state catalytic response of the enzyme. Other determinants of the catalytic rate, such as domain motions, have been probed by examining the transient catalytic response recorded at fast scan rates. Last, we show that combining electrochemical investigations and MD, DFT, and TD-DFT calculations is an original way of probing the reactivity of the H-cluster of hydrogenase, in particular its reactions with CO, O2, and light. This approach contrasts with the usual strategy which aims at stabilizing species that are presumed to be catalytic intermediates, and determining their structure using spectroscopic or structural methods.

Roles of the F-domain in [FeFe] hydrogenase.

The role of accessory Fe-S clusters of the F-domain in the catalytic activity of M3-type [FeFe] hydrogenase and the contribution of each of the two Fe-S surface clusters in the intermolecular electron transfer from ferredoxin are both poorly understood. We designed, constructed, produced and spectroscopically, electrochemically and biochemically characterized three mutants of Clostridium acetobutylicum CaHydA hydrogenase with modified Fe-S clusters: two site-directed mutants, HydA_C100A and HydA_C48A missing the FS4C and the FS2 surface Fe-S clusters, respectively, and a HydA_ΔDA mutant that completely lacks the F-domain. Analysis of the mutant enzyme activities clearly demonstrated the importance of accessory clusters in retaining full enzyme activity at potentials around and higher than the equilibrium 2H+/H2 potential but not at the lowest potentials, where all enzymes have a similar turnover rate. Moreover, our results, combined with molecular modelling approaches, indicated that the FS2 cluster is the main gate for electron transfer from reduced ferredoxin.

Interaction of the H-Cluster of FeFe Hydrogenase with Halides.

FeFe hydrogenases catalyze H2 oxidation and production using an "H-cluster", where two Fe ions are bound by an aza-dithiolate (adt) ligand. Various hypotheses have been proposed (by us and others) to explain that the enzyme reversibly inactivates under oxidizing, anaerobic conditions: intramolecular binding of the N atom of adt, formation of the so-called "Hox/inact" state or nonproductive binding of H2 to isomers of the H-cluster. Here, we show that none of the above explains the new finding that the anaerobic, oxidative, H2-dependent reversible inactivation is strictly dependent on the presence of Cl- or Br-. We provide experimental evidence that chloride uncompetitively inhibits the enzyme: it reversibly binds to catalytic intermediates of H2 oxidation (but not to the resting "Hox" state), after which oxidation locks the active site into a stable, saturated, inactive form, the structure of which is proposed here based on DFT calculations. The halides interact with the amine group of the H-cluster but do not directly bind to iron. It should be possible to stabilize the inhibited state in amounts compatible with spectroscopic investigations to explore further this unexpected reactivity of the H-cluster of hydrogenase.

Engineering an [FeFe]-Hydrogenase: Do Accessory Clusters Influence O2 Resistance and Catalytic Bias?

[FeFe]-hydrogenases, HydAs, are unique biocatalysts for proton reduction to H2. However, they suffer from a number of drawbacks for biotechnological applications: size, number and diversity of metal cofactors, oxygen sensitivity. Here we show that HydA from Megasphaera elsdenii (MeHydA) displays significant resistance to O2. Furthermore, we produced a shorter version of this enzyme (MeH-HydA), lacking the N-terminal domain harboring the accessory FeS clusters. As shown by detailed spectroscopic and biochemical characterization, MeH-HydA displays the following interesting properties. First, a functional active site can be assembled in MeH-HydA in vitro, providing the enzyme with excellent hydrogenase activity. Second, the resistance of MeHydA to O2 is conserved in MeH-HydA. Third, MeH-HydA is more biased toward proton reduction than MeHydA, as the result of the truncation changing the rate limiting steps in catalysis. This work shows that it is possible to engineer HydA to generate an active hydrogenase that combines the resistance of the most resistant HydAs and the simplicity of algal HydAs, containing only the H-cluster.

Maturation of the [Ni-4Fe-4S] active site of carbon monoxide dehydrogenases.

Nickel-containing enzymes are diverse in terms of function and active site structure. In many cases, the biosynthesis of the active site depends on accessory proteins which transport and insert the Ni ion. We review and discuss the literature related to the maturation of carbon monoxide dehydrogenases (CODH) which bear a nickel-containing active site consisting of a [Ni-4Fe-4S] center called the C-cluster. The maturation of this center has been much less studied than that of other nickel-containing enzymes such as urease and NiFe hydrogenase. Several proteins present in certain CODH operons, including the nickel-binding proteins CooT and CooJ, still have unclear functions. We question the conception that the maturation of all CODH depends on the accessory protein CooC described as essential for nickel insertion into the active site. The available literature reveals biological variations in CODH active site biosynthesis.

Correction to: Maturation of the [Ni-4Fe-4S] active site of carbon monoxide dehydrogenases.

Correction to: JBIC Journal of Biological Inorganic Chemistry.