Thermally Switchable Nanogate Based on Polymer Phase Transition.

Mimicking and extending the gating properties of biological pores is of paramount interest for the fabrication of membranes that could be used in filtration or drug processing. Here, we build a selective and switchable nanopore for macromolecular cargo transport. Our approach exploits polymer graftings within artificial nanopores to control the translocation of biomolecules. To measure transport at the scale of individual biomolecules, we use fluorescence microscopy with a zero-mode waveguide set up. We show that grafting polymers that exhibit a lower critical solution temperature creates a toggle switch between an open and closed state of the nanopore depending on the temperature. We demonstrate tight control over the transport of DNA and viral capsids with a sharp transition (∼1 °C) and present a simple physical model that predicts key features of this transition. Our approach provides the potential for controllable and responsive nanopores in a range of applications.

Long-Range Plasmon-Induced Anisotropic Growth of an Organic Semiconductor between Isotropic Gold Nanoparticles.

Plasmon-induced diazonium reduction was used to graft an organic semiconductor, namely oligo(bisthienylbenzene) (BTB), onto square arrays of gold nanoparticles (NPs) of various diameters. Grafting was evidenced by scanning electron microscopy (SEM) measurements by the extinction spectra of the localized surface plasmon resonance, as well as by Raman and energy dispersive X-ray (EDX) spectroscopies. We show that BTB is selectively deposited around the NPs. The thickness of the layer increases with increasing irradiation time and reaches a limit which depends on the size of the NPs with the thicker organic layers being generated for smaller NPs. Under polarized irradiation, BTB growth is strongly anisotropic. Starting from arrays with square gratings and spherical NPs, long-range plasmon-induced anisotropic growth makes it possible to generate in the direction of the polarized light, lines, columns, or lines and columns of NPs connected by an organic semiconductor. These results demonstrate that the growth is due to hot electrons.

Single-Molecule Junctions with Highly Improved Stability.

Single-molecule junctions (SMJs) have been fabricated using layers generated by diazonium electroreduction. This process creates a C-Au covalent bond between the molecule and the electrode. Rigid oligomers of variable length, based on porphyrin derivatives in their free base or cobalt complex forms, have been grafted on the surface. The conductance of the oligomers has been studied by a scanning tunneling microscopy break junction (STM-bj) technique and G(t) measurements, and the lifetime of the SMJs has been investigated. The conductance histograms indicate that charge transport in the porphyrins is relatively efficient and influenced by the presence of the cobalt center. With both systems, random telegraph G(t) signals are easily recorded, showing SMJ on/off states. The SMJs then stabilize and exhibit a surprisingly long lifetime around 10 s, and attenuation plots, obtained by both G(t) and STM-bj measurements, give identical values. This work shows that highly stable SMJs can be prepared using a diazonium grafting approach.

Unprecedented ON/OFF Ratios in Photoactive Diarylethene-Bisthienylbenzene Molecular Junctions.

Photoactive molecular junctions, based on 4 nm thick diarylethene (DAE) and 5 nm thick bisthienylbenzene (BTB) layers, were fabricated by electrochemical deposition. Total thickness was around 9 nm, that is, above the direct tunneling limit and in the hopping regime. The DAE units were switched between their open and closed forms. The DAE/BTB bilayer structure exhibits new electronic functions combining photoswitching and photorectification. The open form of DAE/BTB shows low conductance and asymmetric I-V curves while the closed form shows symmetric I-V curves and high conductance. More importantly, unprecedented ON/OFF current ratios of over 10 000 at 1 V were reproducibly measured.

Long-Range Charge Transport in Diazonium-Based Single-Molecule Junctions.

Thin layers of cobalt and ruthenium polypyridyl-oligomers with thicknesses between 2 and 8 nm were deposited on gold by electrochemical reduction of diazonium salts. A scanning tunneling microscope was used to create single-molecule junctions (SMJs). The charge transport properties of the Au-[Co(tpy)2]n-Au (n = 1-4) SMJs do not depend markedly on the oligomer length, have an extremely low attenuation factor (ß âˆ¼ 0.19 nm-1), and do not show a thickness-dependent transition between two mechanisms. Resonant charge transport is proposed as the main transport mechanism. The SMJ conductance decreases by 1 order of magnitude upon changing the metal from Co to Ru. In Au-[Ru(tpy)2]n-Au and Au-[Ru(bpy)3]n-Au SMJs, a charge transport transition from direct tunneling to hopping is evidenced by a break in the length-dependent ß-plot. The three different mechanisms observed are a clear molecular signature on transport in SMJs. Most importantly, these results are in good agreement with those obtained on large-area molecular junctions.

Highly Efficient Photoswitch in Diarylethene-Based Molecular Junctions.

Thin layers of diarylethene oligomers (oligo(DAE)) were deposited by electrochemical reduction of a diazonium salt on glassy carbon and gold electrodes. The layers were fully characterized using electrochemistry, XPS, and AFM, and switching between open and closed forms using light was evidenced. Solid-state molecular junctions (MJs), in which a C-AFM tip is used as the top contact, were fabricated with total layer thicknesses fixed at 2-3 nm and 8-9 nm, i.e. below and above the direct tunneling limit. DAE was then photoswitched between its open and closed forms. Oligo(DAE) MJs using the open form of DAE are highly resistive while those with DAE in the closed form are more conductive. ON/OFF ratios of 2-3 and 200-400 were obtained for 3-nm- and 9-nm-thick DAE MJs, respectively.

Nanostructured Mixed Layers of Organic Materials Obtained by Nanosphere Lithography and Electrochemical Reduction of Aryldiazonium Salts.

In this work, we have combined nanosphere lithography with electrochemical reduction of aryldiazonium salts to elaborate nanostructured mixed layers of organic materials. The strategy consists first in the deposition of a close-packed hexagonal monolayer of microbeads used as a mask for the electroreduction of a first aryldiazonium salt. After removing the beads, an ultrathin organic layer with holes remains. Then, a second aryldiazonium salt is electrochemically reduced selectively inside the holes. The relative thickness of the two deposited materials can be changed, leading to mixed layers of different topographies. Moreover, using diazoniums with complementary redox properties, a modified bifunctional electrode acting as a filter for electron transfer with a low potential gap has been obtained. Such layers are similar to low-band-gap organic semiconductors that can be easily n or p doped. Despite this analogy, the oxidation and reduction of redox probes in solution on such nanostructured surfaces occur on completely separated areas of the mixed layer.

Highly Efficient Long-Range Electron Transport in a Viologen-Based Molecular Junction.

Thin layers of viologen-based oligomers with thicknesses between 3 and 14 nm were deposited on gold electrodes by electrochemical reduction of a diazonium salt, and then a Ti/Au top contact was applied to complete a solid-state molecular junction (MJ). MJs show symmetric J- V curves and highly efficient long-range transport, with an attenuation factor as small as 0.25 nm-1. This is attributed both to the fact that the viologen LUMO energy lies between the energies of the Fermi levels of the two contacts and to strong electronic coupling between molecules and contacts. As a consequence, resonant tunneling is likely to be the dominant transport mechanism within these MJs, but the temperature dependence of the transport properties suggests that activated redox hopping plays a role at high temperature.

Robust Bipolar Light Emission and Charge Transport in Symmetric Molecular Junctions.

Molecular junctions consisting of a Ru(bpy)3 oligomer between conducting carbon contacts exhibit an exponential dependence of junction current on molecular layer thickness (d) similar to that observed for other aromatic devices when d < 4 nm. However, when d > 4 nm, a change in transport mechanism occurs which coincides with light emission in the range of 600-900 nm. Unlike light emission from electrochemical cells or solid-state films containing Ru(bpy)3, emission is bipolar, occurs in vacuum, has rapid rise time (<5 ms), and persists for >10 h. Light emission directly indicates simultaneous hole and electron injection and transport, possibly resonant due to the high electric field present (>3 MV/cm). Transport differs fundamentally from previous tunneling and hopping mechanisms and is a clear "molecular signature" relating molecular structure to electronic behavior.

Control of Rectification in Molecular Junctions: Contact Effects and Molecular Signature.

Thin layers of oligomers with thickness between 7 and 9 nm were deposited on flat gold electrode surfaces by electrochemical reduction of diazonium reagents, then a Ti(2 nm)/Au top contact was applied to complete a solid-state molecular junction. The molecular layers investigated included donor molecules with relatively high energy HOMO, molecules with high HOMO-LUMO gaps and acceptor molecules with low energy LUMO and terminal alkyl chain. Using an oligo(bisthienylbenzene) based layer, a molecule whose HOMO energy level in a vacuum is close to the Fermi level of the gold bottom electrode, the devices exhibit robust and highly reproducible rectification ratios above 1000 at low voltage (2.7 V). Higher current is observed when the bottom gold electrode is biased positively. When the molecular layer is based on a molecule with a high HOMO-LUMO gap, i.e., tetrafluorobenzene, no rectification is observed, while the direction of rectification is reversed if the molecular layer consists of naphtalene diimides having low LUMO energy level. Rectification persisted at low temperature (7 K), and was activationless between 7 and 100 K. The results show that rectification is induced by the asymmetric contact but is also directly affected by orbital energies of the molecular layer. A "molecular signature" on transport through layers with thicknesses above those used when direct tunneling dominates is thus clearly observed, and the rectification mechanism is discussed in terms of Fermi level pinning and electronic coupling between molecules and contacts.

Control of Electronic Symmetry and Rectification through Energy Level Variations in Bilayer Molecular Junctions.

Two layers of molecular oligomers were deposited on flat carbon electrode surfaces by electrochemical reduction of diazonium reagents, then a top contact applied to complete a solid-state molecular junction containing a molecular bilayer. The structures and energy levels of the molecular layers included donor molecules with relatively high energy occupied orbitals and acceptors with low energy unoccupied orbitals. When the energy levels of the two molecular layers were similar, the device had electronic characteristics similar to a thick layer of a single molecule, but if the energy levels differed, the current voltage behavior exhibited pronounced rectification. Higher current was observed when the acceptor molecule was biased negatively in eight different bilayer combinations, and the direction of rectification was reversed if the molecular layers were also reversed. Rectification persisted at very low temperature (7 K), and was activationless between 7 and 100 K. The results are a clear example of a "molecular signature" in which electronic behavior is directly affected by molecular structure and orbital energies. The rectification mechanism is discussed, and may provide a basis for rational design of electronic properties by variation of molecular structure.

Unprecedented Self-Organized Monolayer of a Ru(II) Complex by Diazonium Electroreduction.

A new heteroleptic polypyridyle Ru(II) complex was synthesized and deposited on surface by the diazonium electroreduction process. It yields to the covalent grafting of a monolayer. The functionalized surface was characterized by XPS, electrochemistry, AFM, and STM. A precise organization of the molecules within the monolayer is observed with parallel linear stripes separated by a distance of 3.8 nm corresponding to the lateral size of the molecule. Such organization suggests a strong cooperative process in the deposition process. This strategy is an original way to obtain well-controlled and stable functionalized surfaces for potential applications related to the photophysical properties of the grafted chromophore. As an exciting result, it is the first example of a self-organized monolayer (SOM) obtained using diazonium electroreduction.

Activationless charge transport across 4.5 to 22 nm in molecular electronic junctions.

In this work, we bridge the gap between short-range tunneling in molecular junctions and activated hopping in bulk organic films, and greatly extend the distance range of charge transport in molecular electronic devices. Three distinct transport mechanisms were observed for 4.5-22-nm-thick oligo(thiophene) layers between carbon contacts, with tunneling operative when d < 8 nm, activated hopping when d > 16 nm for high temperatures and low bias, and a third mechanism consistent with field-induced ionization of highest occupied molecular orbitals or interface states to generate charge carriers when d = 8-22 nm. Transport in the 8-22-nm range is weakly temperature dependent, with a field-dependent activation barrier that becomes negligible at moderate bias. We thus report here a unique, activationless transport mechanism, operative over 8-22-nm distances without involving hopping, which severely limits carrier mobility and device lifetime in organic semiconductors. Charge transport in molecular electronic junctions can thus be effective for transport distances significantly greater than the 1-5 nm associated with quantum-mechanical tunneling.

Marcus Theory and Long-Range Activationless Transport in Molecular Junctions.

Intrachain transport in molecular junctions (MJs) longer than 5 nm has been modeled within the theoretical framework of Marcus theory. We show that in oligo(bisthienylbenzene)-based MJs, electronic transport involves polarons, localized on three monomers that are close to 4 nm in length. They hop and tunnel between adjacent localized sites with reorganization energies λ close to 400-600 meV and electronic coupling parameters Hab close to λ/2. As a consequence, the activation energy for intrachain transport, given by the equation ΔG* = (λ/4)(1 - 2Hab/λ)2, is close to zero, and transport along the chain is activationless, in agreement with experimental observation. On the contrary, similar calculations on conjugated oligonaphthalenefluoreneimine wires show that Hab is much less than λ/2 and predict that the activation energies for intrachain hopping between adjacent sites, close to λ/4, are ∼115 meV. This work proposes a new perspective for understanding long-range activationless transport in MJs beyond the tunneling regime.

Assessing the Influence of Confinement on the Stability of Polyoxometalate-Functionalized Surfaces: A Soft Sequential Immobilization Approach for Electrochromic Devices.

A functionalization process has been developed and the experimental conditions optimized allowing the immobilization of first-row transition metal (Mn+) containing polyoxometalates (POMs) with the formula [M(H2O)P2W17O61](10-n)- on transparent indium-tin oxide (ITO) electrodes for electrochromic applications. Both flat ITO grafted with 4-sulfophenyl moieties and sulfonate-functionalized vertically oriented silica films on ITO have been used as electrode supports to evaluate possible confinement effects provided by the mesoporous matrix on the stability of the modified surfaces and their electrochromic properties. Functionalization involved a two-step sequential process: (i) the immobilization of hexaaqua metallic ions, such as Fe(H2O)63+, onto the sulfonate-functionalized materials achieved through hydrogen bonding interactions between the sulfonate functions and aqua ligands (water molecules) coordinated to the metallic ions facilitating and stabilizing the attachment of the metallic ions to the sulfonated surfaces; (ii) their coordination to [P2W17O61]10- species to generate "in situ" the target [Fe(H2O)P2W17O61]7- moieties. Comparison of the characterized surfaces clearly evidenced a significant improvement in the long-term stability of the nanostructured [Fe(H2O)P2W17O61]7--functionalized silica films compared to the less constrained flat [Fe(H2O)P2W17O61]7--modified ITO electrodes for which a rapid loss of [P2W17O61]10- species was observed. Concordantly, the [Fe(H2O)P2W17O61]7- POM confined in the mesoporous films coated on ITO gave rise to much better and stable electrochromic properties, with a transmittance modulation of 40% at 515 nm.

Soft jamming of viral particles in nanopores.

Viruses have remarkable physical properties and complex interactions with their environment. However, their aggregation in confined spaces remains unexplored, although this phenomenon is of paramount importance for understanding viral infectivity. Using hydrodynamical driving and optical detection, we developed a method to detect the transport of single virus in real time through synthetic nanopores. We unveiled a jamming phenomenon specifically associated with virus confinement under flow. We showed that the interactions of viral particles with themselves and with the pore surface were critical for clog formation. Based on the detailed screening of the physical and chemical determinants, we proposed a simple dynamical model that recapitulated all the experimental observations. Our results pave the way for the study of jamming phenomena in the presence of more complex interactions.

Formation of a bifunctional redox system using electrochemical reduction of platinum in ferrocene based ionic liquid and its reactivity with aryldiazonium.

The electrochemical reduction of platinum in ferrocene based ionic liquid, 1-ferrocenylethyl-3-methylimidazolium bis(trifluoromethylsulfonyl)imide ([FcEMIM][TFSI]), has been investigated on both macro and micro platinum electrodes. The electrochemical and X-ray photoelectron spectroscopy (XPS) analyses of the reduced platinum evidence the presence and the intercalation of the ferrocene imidazolium into the platinum surface. The resulting metal-organic phase was anticipated to be of the general formula [Ptn(δ-), FcEMIM(δ+)]. Next, the spontaneous reaction of the electrogenerated Pt phases as reducing agent with phenyl diazonium salts was performed. The "reduced platinum phase" reacts with nitrophenyl diazonium salts, without applying any external potential, and conduces to the attachment of nitrophenyl groups onto the surface. Detailed experiments based on cyclic voltammetry and XPS were carried out to follow the occurrence of the grafting. Indeed, both experiments evidence the presence of ferrocene and nitrophenyl groups on the Pt surface. As a result, a bifunctional active surface containing two redox systems has been obtained.

When electron transfer meets electron transport in redox-active molecular nanojunctions.

A scanning electrochemical microscope (SECM) was used to arrange two microelectrodes face-to-face separated by a micrometric gap. Polyaniline (PANI) was deposited electrochemically from the SECM tip side until it bridged the two electrodes. The junctions obtained were characterized by following the current through the PANI as a function of its electrochemical potential measured versus a reference electrode acting as a gate electrode in a solid-state transistor. PANI nanojunctions showed conductances below 100 nS in the oxidized state, indicating control of the charge transport within the whole micrometric gap by a limited number of PANI wires. The SECM configuration makes it possible to observe in the same experiment and in the same current range the electron-transfer and electron-transport processes. These two phenomena are distinguished here and characterized by following the variation of the current with the bias voltage and the scan rate. The electron-transfer current changes with the scan rate, while the charge-transport current varies with the bias voltage. Finally, despite the initially micrometric gap, a junction where the conductance is controlled by a single oligoaniline strand is achieved.

Direct observation of large quantum interference effect in anthraquinone solid-state junctions.

Quantum interference in cross-conjugated molecules embedded in solid-state devices was investigated by direct current-voltage and differential conductance transport measurements of anthraquinone (AQ)-based large area planar junctions. A thin film of AQ was grafted covalently on the junction base electrode by diazonium electroreduction, while the counter electrode was directly evaporated on top of the molecular layer. Our technique provides direct evidence of a large quantum interference effect in multiple CMOS compatible planar junctions. The quantum interference is manifested by a pronounced dip in the differential conductance close to zero voltage bias. The experimental signature is well developed at low temperature (4 K), showing a large amplitude dip with a minimum >2 orders of magnitude lower than the conductance at higher bias and is still clearly evident at room temperature. A temperature analysis of the conductance curves revealed that electron-phonon coupling is the principal decoherence mechanism causing large conductance oscillations at low temperature.

Oxidative and stepwise grafting of dopamine inner-sphere redox couple onto electrode material: electron transfer activation of dopamine.

The immobilization of dopamine, a neurotransmitter, onto macroelectrode and microelectrode surfaces has been performed following two strategies. The first consists of a one-step grafting based on electrochemical oxidation of an amino group in acidic media. The second is a stepwise process starting with electrochemical grafting of diazonium, leading to the attachment of aryl layer bearing an acidic headgroup, followed by chemical coupling leading to immobilized dopamine molecules onto the electrode surface. Electrochemical, infrared (IR) spectroscopy, and X-ray photoelectron spectroscopy (XPS) analyses evidence that both methods are suitable for the immobilization of dopamine onto millimetric and micronic electrodes. The electrochemical responses of modified electrodes demonstrate that the electroactivity of the attached dopamine layer appears unaffected by the nature of the spacer, alkyl or aryl layers, suggesting that the communication, through tunneling, between the attached dopamine and the electrode is possible. More interestingly, the dopamine-modified electrode exhibits electron transfer activation toward dopamine in solution. As a result, not only does the dopamine modified electrode yield a fast electron transfer with lower ΔE(p) (30 mV) than the majority of pretreatment procedures but also the ΔE(p) is as small as that observed for more complex surface treatments.