Unveil the origin of voltage oscillation for sodium-ion batteries operating at -40 °C.

Voltage oscillation at subzero in sodium-ion batteries (SIBs) has been a common but overlooked scenario, almost yet to be understood. For example, the phenomenon seriously deteriorates the performance of Na3V2(PO4)3 (NVP) cathode in PC (propylene carbonate)/EC (ethylene carbonate)-based electrolyte at -20 °C. Here, the correlation between voltage oscillation, structural evolution, and electrolytes has been revealed based on theoretical calculations, in-/ex-situ techniques, and cross-experiments. It is found that the local phase transition of the Na3V2(PO4)3 (NVP) cathode in PC/EC-based electrolyte at -20 °C should be responsible for the oscillatory phenomenon. Furthermore, the low exchange current density originating from the high desolvation energy barrier in NVP-PC/EC system also aggravates the local phase transformation, resulting in severe voltage oscillation. By introducing the diglyme solvent with lower Na-solvent binding energy, the voltage oscillation of the NVP can be eliminated effectively at subzero. As a result, the high capacity retentions of 98.3% at -20 °C and 75.3% at -40 °C are achieved. The finding provides insight into the abnormal SIBs degradation and brings the voltage oscillation behavior of rechargeable batteries into the limelight.

Bifunctional interfacial engineering enabled efficient and stable carbon-based CsPbIBr2 perovskite solar cells.

Carbon-based inorganic CsPbIBr2 perovskite solar cells (C-IPSC) have attracted widespread attention due to their low cost and excellent thermal stability. Unfortunately, due to the soft ion crystal nature of perovskite, inherent bulk defects and energy level mismatch at the CsPbIBr2/carbon interface limit the performance of the device. In this study, we introduced aromatic benzyltrimethylammonium chloride (BTACl) as a passivation layer to passivate the surface and grain boundaries of the CsPbIBr2 film. Due to the reduction of perovskite defects and better energy level arrangement, carrier recombination is effectively suppressed and hole extraction is improved. The champion device achieves a maximum power conversion efficiency (PCE) of 11.30% with reduces hysteresis and open circuit voltage loss. In addition, unencapsulated equipment exhibits excellent stability in ambient air.

High-Efficiency Carbon-based CsPbI2 Br Perovskite Solar Cells from Dual Direction Thermal Diffusion Treatment with Cadmium Halides.

In recent years, carbon-based CsPbI2 Br perovskite solar cells (PSCs) have attracted more attention due to their low cost and good stability. However, the power conversion efficiency (PCE) of carbon-based CsPbI2 Br PSCs is still no more than 16%, because of the defects in CsPbI2 Br or at the interface with the electron transport layer (ETL), as well as the energy level mismatch, which lead to the loss of energy, thus limiting PCE values. Herein, a series of cadmium halides are introduced, including CdCl2 , CdBr2 and CdI2 for dual direction thermal diffusion treatment. Some Cd2+ ions thermally diffuse downward to passivate the defects inside or on the surface of SnO2 ETL. Meanwhile, the energy level structure of SnO2 ETL is adjusted, which is in favor of the transfer of electron carriers and blocking holes. On the other hand, part of Cd2+ and Cl- ions thermally diffuse upward into the CsPbI2 Br lattice to passivate crystal defects. Through dual direction thermal diffusion treatment by CdCl2 , CdI2 and CdBr2 , the performance of devices has been significantly improved, and their PCE has been increased from 13.01% of the original device to 14.47%, 14.31%, and 13.46%, respectively. According to existing reports, 14.47% is one of the highest PCE of carbon-based CsPbI2 Br PSCs with SnO2 ETLs.

Bioinformatics Analysis and Identification of Genes and Molecular Pathways Involved in Venous Thromboembolism (VTE).

OBJECTIVES: To explore the key genes, and correlated pathways in venous thromboembolism (VTE) via bioinformatic analysis, and expected our findings could contribute to the development of new biomarkers and therapeutic target for VTE. METHODS: Two VTE-related microarray expression profiles (GSE48000 and GSE19151) were downloaded from the Gene Expression Ominibus (GEO) database. Differentially expressed genes (DEGs) were analyzed using limma package, and overlapping DEGs were identified form the above two expression profiles. Then, Gene Ontology (GO) and Kyoto Encyclopedia of Genes and Genomes (KEEG) pathway enrichment analyses were performed by DAVID. Protein-protein interaction (PPI) network was constructed by using STRING and visualized with Cytoscape. Furthermore, module analysis plus centrality analysis of the PPI network were executed to identify the potential key genes. Finally, the pathway analysis was performed using GenCLiP 3.0. RESULTS: A total of 173 DEGs (125 upregulated and 48 downregulated) were identified. GO analysis demonstrated that DEGs were mainly enriched in viral life cycle, ribosome and structural constituent of ribosome. Meanwhile, KEGG pathway analysis showed that these genes were enriched in ribosome, Parkinson's disease and cell cycle. Additionally, one most significant module and 12 hub genes were found. Finally, 6 key genes, namely ISG15, RPS15A, MRPL13, ICT1, MRPL15 and RPLP0, with high centrality features were identified. These key genes were mainly involved in translation, metabolism of proteins and ribosome pathway. CONCLUSIONS: In summary, these 6 identified genes and correlated pathways should play an important role in VTE, which can provide new insight into the molecular mechanism, potential biomarkers and therapeutic targets associated with VTE.

Additive Engineering by Bifunctional Guanidine Sulfamate for Highly Efficient and Stable Perovskites Solar Cells.

High efficiency and good stability are the challenges for perovskite solar cells (PSCs) toward commercialization. However, the intrinsic high defect density and internal nonradiative recombination of perovskite (PVK) limit its development. In this work, a facile additive strategy is devised by introducing bifunctional guanidine sulfamate (GuaSM; CH6 N3 + , Gua+ ; H2 N-SO3 - , SM- ) into PVK. The size of Gua+ ion is suitable with Pb(BrI)2 cavity relatively, so it can participate in the formation of low-dimensional PVK when mixed with Pb(BrI)2 . The O and N atoms of SM- can coordinate with Pb2+ . The synergistic effect of the anions and cations effectively reduces the trap density and the recombination in PVK, so that it can improve the efficiency and stability of PSCs. At an optimal concentration of GuaSM (2 mol%), the PSC presents a champion power conversion efficiency of 21.66% and a remarkably improved stability and hysteresis. The results provide a novel strategy for highly efficient and stable PSCs by bifunctional additive.

Assessment of the Hemodynamics of Autogenous Arteriovenous Fistulas With 4D Phase Contrast-Based Flow Quantification MRI in Dialysis Patients.

BACKGROUND: Regular monitoring of autogenous arteriovenous fistulas (AVFs) for hemodialysis patients has importance. Hence, 4D flow MRI may be an alternative for assessing the hemodynamics of AVFs. PURPOSE: To compare the hemodynamics of AVFs using Doppler ultrasound (DUS) and 4D-MRI in renal dialysis patients. STUDY TYPE: Case-control study from October 2017 to April 2018. POPULATION: Fifty patients (age [range] = 59.52 [39-71] years) with AVFs were included. FIELD STRENGTH/SEQUENCE: Black-blood MRI and 4D flow MRI at 3.0T and AVF ultrasonography were also performed. ASSESSMENT: The hemodynamics acquired from 4D flow MRI and ultrasonography by two radiologists were compared. The AVF anatomy was described through an examination of the black-blood MRI. STATISTICAL TESTS: The consistency of AVF anatomy and hemodynamics and the consistency of the hemodynamics of AVFs from 4D flow MRI and ultrasound were analyzed by paired t-tests. The morphological parameters of AVFs acquired from black-blood MRI were used for a Pearson correlation analysis with the hemodynamic parameters obtained from 4D flow MRI data. RESULTS: The consistency of the morphological and hemodynamic parameters measured from MRI by the two radiologists was good (all P < 0.01). The velocities and flow volumes from the 4D flow MRI and vascular ultrasound of AVFs were in moderate agreement (all P < 0.05, r = 0.292-0.569), except for the peak flow velocity at the anastomosis (P = 0.366, r = -0.078). The flow volume and WSS near the anastomotic site were closely related to the morphology of the AVFs (all P < 0.05). The hemodynamics of the complications group were significantly different from those of patients without any complications (normal patients group) (all P < 0.01). DATA CONCLUSION: Compared with ultrasonography, 4D flow MRI is a promising technique to noninvasively estimate the AVF hemodynamics of renal dialysis patients. LEVEL OF EVIDENCE: 3 Technical Efficacy: Stage 2 J. Magn. Reson. Imaging 2020;51:1272-1280.

Counter electrodes in dye-sensitized solar cells.

Dye-sensitized solar cells (DSSCs) are regarded as prospective solar cells for the next generation of photovoltaic technologies and have become research hotspots in the PV field. The counter electrode, as a crucial component of DSSCs, collects electrons from the external circuit and catalyzes the redox reduction in the electrolyte, which has a significant influence on the photovoltaic performance, long-term stability and cost of the devices. Solar cells, dye-sensitized solar cells, as well as the structure, principle, preparation and characterization of counter electrodes are mentioned in the introduction section. The next six sections discuss the counter electrodes based on transparency and flexibility, metals and alloys, carbon materials, conductive polymers, transition metal compounds, and hybrids, respectively. The special features and performance, advantages and disadvantages, preparation, characterization, mechanisms, important events and development histories of various counter electrodes are presented. In the eighth section, the development of counter electrodes is summarized with an outlook. This article panoramically reviews the counter electrodes in DSSCs, which is of great significance for enhancing the development levels of DSSCs and other photoelectrochemical devices.

HPLC-MRM relative quantification analysis of fatty acids based on a novel derivatization strategy.

Fatty acids (FAs) are associated with a series of diseases including tumors, diabetes, and heart diseases. As potential biomarkers, FAs have attracted increasing attention from both biological researchers and the pharmaceutical industry. However, poor ionization efficiency, extreme diversity, strict dependence on internal standards and complicated multiple reaction monitoring (MRM) optimization protocols have challenged efforts to quantify FAs. In this work, a novel derivatization strategy based on 2,4-bis(diethylamino)-6-hydrazino-1,3,5-triazine was developed to enable quantification of FAs. The sensitivity of FA detection was significantly enhanced as a result of the derivatization procedure. FA quantities as low as 10 fg could be detected by high-performance liquid chromatography coupled with triple-quadrupole mass spectrometry. General MRM conditions were developed for any FA, which facilitated the quantification and extended the application of the method. The FA quantification strategy based on HPLC-MRM was carried out using deuterated derivatization reagents. "Heavy" derivatization reagents were used as internal standards (ISs) to minimize matrix effects. Prior to statistical analysis, amounts of each FA species were normalized by their corresponding IS, which guaranteed the accuracy and reliability of the method. FA changes in plasma induced by ageing were studied using this strategy. Several FA species were identified as potential ageing biomarkers. The sensitivity, accuracy, reliability, and full coverage of the method ensure that this strategy has strong potential for both biomarker discovery and lipidomic research.

COVID-19 Omicron variant infection has minimal impact on maternal and neonatal outcomes: A cross-sectional cohort study.

AIM: To explore the impact of the Omicron variant on maternal and neonatal outcomes. DESIGN: Cross-sectional cohort study of women giving live birth in a single hospital in Shanghai in December 2022. METHODS: Demographic characteristics, maternal and neonatal outcomes and laboratory testing results were retrieved from medical records. Propensity score matching was used to match COVID-19-positive and -negative women. Differential analysis was used to assess associations between COVID-19 and in-hospital maternal and neonatal outcomes. RESULTS: A total of 1508 women were included, comprising 729 natural births, 741 caesarean sections and 38 forceps deliveries. After 1:1 matching, 310 clients were included for analysis with each 155 in COVID-19-positive and -negative groups. Higher maternal fever was found in all modes of delivery, and higher preterm birth and lower pH value of blood gas of the umbilical artery in the vaginal delivery subgroup (p < 0.05). Other maternal and neonatal outcomes showed no significant difference between COVID-19-positive and -negative clients.

Maimendong decoction regulates M2 macrophage polarization to suppress pulmonary fibrosis via PI3K/Akt/FOXO3a signalling pathway-mediated fibroblast activation.

ETHNOPHARMACOLOGICAL RELEVANCE: Mai Men Dong decoction (MMDD), a traditional Chinese medicine formula, is relevant to ethnopharmacology due to its constituents and therapeutic properties. The formula contains herbs like Ophiopogon japonicus (Thunb.) Ker Gawl., Pinellia ternata (Thunb.) Makino, Panax ginseng C.A.Mey, Glycyrrhiza uralensis Fisch, and Ziziphus jujuba Mill, Oryza sativa L., which have been used for centuries in Chinese medicine. These herbs provide a comprehensive approach to treating respiratory conditions by addressing dryness, cough, and phlegm. Ethnopharmacological studies have explored the scientific basis of these herbs and identified active compounds that contribute to their medicinal effects. The traditional usage of MMDD by different ethnic groups reflects their knowledge and experiences. Examining this formula contributes to the understanding and development of ethnopharmacology. AIM OF THE STUDY: In the case of pulmonary fibrosis (PF), treating it can be challenging due to the limited treatment options available. This study aimed to assess the potential of MMDD as a treatment for PF by targeting macrophages and the PI3K/Akt/FOXO3a signaling pathway. MATERIALS AND METHODS: In a mouse model of PF, we investigated the effects of MMDD on inflammation, fibrosis, and M2 macrophage infiltration in lung tissue. Additionally, we examined the modulation of pro-fibrotic factors and key proteins in the PI3K/Akt/FOXO3a pathway. In vitro experiments involved inducing M2-type macrophages and assessing the impact of MMDD on fibroblast activation and the PI3K/Akt/FOXO3a pathway. RESULTS: Results demonstrated that MMDD improved weight, reduced inflammation, and inhibited M2 macrophage infiltration in mouse lung tissue. It downregulated pro-fibrotic factors, such as TGF-ß1 and PDGF-RB, as well as markers of fibroblast activation. MMDD also exhibited regulatory effects on key proteins in the PI3K/Akt/FOXO3a signaling pathway. CONCLUSIONS: MMDD inhibited M2 macrophage polarization and released profibrotic factors that inhibited pulmonary fibrosis. As a result, the PI3K/Akt/FOXO3a signaling pathway is suppressed. MMDD is proving to be a successful treatment for PF. However, further research is needed to validate its effectiveness in clinical practice.

CircPRDM5 inhibits the proliferation, migration, invasion, and glucose metabolism of gastric cancer cells by reducing GCNT4 expression in a miR-485-3p-dependent manner.

Circular RNA (circRNA) plays a key part in the pathological process of gastric cancer (GC). The study is organized to analyze the function of circPRDM5 in GC cell tumor properties. Expression levels of circPRDM5, miR-485-3p, glucosaminyl (N-acetyl) transferase 4 (GCNT4), ki67, E-cadherin, N-cadherin, and hexokinase 2 (HK2) were analyzed by quantitative real-time polymerase chain reaction (PCR), Western blotting or immunohistochemistry assay. Cell proliferation was assessed by cell colony formation assay and 5-ethynyl-2'-deoxyuridine assay. Cell migration and invasion were investigated by transwell assay. Glycolysis was evaluated by the Seahorse XF Glycolysis Stress Test Kit. Dual-luciferase reporter assay and RNA pull-down assay were performed to identify the associations among circPRDM5, miR-485-3p, and GCNT4. Xenograft mouse model assay was conducted to determine the effects of circPRDM5 on tumor formation in vivo. CircPRDM5 and GCNT4 expression were downregulated, while miR-485-3p expression was upregulated in GC tissues and cells when compared with paracancerous tissues or human gastric epithelial cells. CircPRDM5 overexpression inhibited proliferation, migration, invasion, and glucose metabolism of GC cells; however, circPRDM5 depletion had the opposite effects. CircPRDM5 repressed tumor properties of GC cells in vivo. MiR-485-3p restoration relieved circPRDM5-induced effects in GC cells. GCNT4 overexpression remitted the promoting effects of miR-485-3p mimics on GC cell malignancy. CircPRDM5 acted as a sponge for miR-485-3p, and GCNT4 was identified as a target gene of miR-485-3p. Moreover, circPRDM5 regulated GCNT4 expression by interacting with miR-485-3p.CircPRDM5 acted as a miR-485-3p sponge to inhibit GC progression by increasing GCNT4 expression, proving a potential target for GC therapy.

Small-Molecule Copper Chloride Modulating the Buried Interfaces of Perovskite Solar Cells.

In perovskite solar cells (PSCs), tin dioxide (SnO2) is a highly effective electron transport material. On the other hand, the low intrinsic conductivity of SnO2, the high trap-state density on the surface and bulk of SnO2, and inadequate interface contacts between SnO2 and perovskite significantly impact device performance. Herein, small-molecule copper(II) chloride (CuCl2) is introduced into the SnO2 dispersion, which inhibits the agglomeration of SnO2 colloids and improves the quality of the electron transport layer. Furthermore, the introduction of CuCl2 optimizes the energy-level array between the ETL and perovskite layer (PVK) and passivates the anion/cation defects in SnO2, perovskite, and their interface, realizing the systematic modulation of the photoelectronic properties of the ETLs and PVKs as well as the PVK/ETL. As a result, the CuCl2-opmized PSC exhibits an impressive power conversion efficiency of 23.71%, along with improved stability.

Poly(3-hexylthiophene)/perovskite Heterointerface by Spinodal Decomposition Enabling Efficient and Stable Perovskite Solar Cells.

The best research-cell efficiency of perovskite solar cells (PSCs) is comparable with that of mature silicon solar cells (SSCs); However, the industrial development of PSCs lags far behind SSCs. PSC is a multiphase and multicomponent system, whose consequent interfacial energy loss and carrier loss seriously affect the performance and stability of devices. Here, by using spinodal decomposition, a spontaneous solid phase segregation process, in situ introduces a poly(3-hexylthiophene)/perovskite (P3HT/PVK) heterointerface with interpenetrating structure in PSCs. The P3HT/PVK heterointerface tunes the energy alignment, thereby reducing the energy loss at the interface; The P3HT/PVK interpenetrating structure bridges a transport channel, thus decreasing the carrier loss at the interface. The simultaneous mitigation of energy and carrier losses by P3HT/PVK heterointerface enables n-i-p geometry device a power conversion efficiency of 24.53% (certified 23.94%) and excellent stability. These findings demonstrate an ingenious strategy to optimize the performance of PSCs by heterointerface via Spinodal decomposition.

Potassium-Based Dual-Ion Batteries Operating at -60 °C Enabled By Co-Intercalation Anode Chemistry.

Battery performance at subzero is restricted by sluggish interfacial kinetics. To resolve this issue, potassium-based dual-ion batteries (K-DIBs) based on the polytriphenylamine (PTPAn) cathode with anion storage chemistry and the hydrogen titanate (HTO) anode with K+ /solvent co-intercalation mechanism are constructed. Both the PTPAn cathode and the HTO anode do not undergo the desolvation process, which can effectively accelerate the interfacial kinetics at subzero. As revealed by theoretical calculations and experimental analysis, the strong K+ /solvent binding energy in the dilute electrolyte, the charge shielding effect of the crystal water, and the uniform SEI layer with high content of the flexible organic species synergically promote HTO to undergo K+ /solvent co-intercalation behavior. The special co-intercalation mechanism and anion storage chemistry enable HTO||PTPAn K-DIBs with superior rate performance and cycle durability, maintaining a capacity retention of 94.1% after 6000 cycles at -40 °C and 91% after 1000 cycles at -60 °C. These results provide a step forward for achieving high-performance energy storage devices at low temperatures.

Synergistic Effect of 2-(Trifluoromethyl) Benzimidazole on the Stability and Performance of Perovskite Solar Cells.

The quality of the perovskite active layer directly impacts the photovoltaic performance of perovskite solar cells (PSCs). Unfortunately, perovskite films produced through solution methods often have a significant number of defects on their surface, which lead to a substantial degradation in the performance of devices. For this reason, a multifunctional additive 2-(trifluoromethyl) benzimidazole (TFMBI) is introduced into perovskite films. Based on the Lewis acid/base coordination principle, the TFMBI double site cooperatively passivates surface defects, inhibiting carrier non-radiative recombination. Simultaneously, the hydrophobic solid group (-CF3) of TFMBI covers the surface, establishing a moisture-oxygen barrier and improving the environmental stability of the devices. In consequence, the power conversion efficiency (PCE) of TFMBI-modified PSCs reached 23.16%, significantly higher than the pristine one with a PCE of 20.62%. Additionally, the unencapsulated target device retained 90.32% of its initial PCE even after being reserved in the air with a relative humidity of 20-30% for 60 days.

Practice audits to reduce caesareans in a tertiary referral hospital in south-western China.

OBJECTIVE: To assess the effectiveness of a three-stage intervention to reduce caesarean deliveries in a Chinese tertiary hospital. METHODS: A retrospective study was conducted to assess whether educating staff, educating patients and auditing surgeon practices (introduced in 2005) had reduced caesarean delivery rates. Multiple logistic regression was used to check for a potential association between caesarean rates and rates of admission to the neonatal intensive care unit (NICU). FINDINGS: The caesarean delivery rate ranged from 53.5% to 56.1% in 2001-2004 and from 43.9% to 36.1% in 2005-2011. When 2001-2004 and 2005-2011 were treated as "before" and "after" periods to evaluate the intervention's impact on the mean caesarean section rate, a significant reduction was noted: from 54.8% to 40.3% (odds ratio, OR: 0.56; 95% confidence interval, CI: 0.52-0.59; χ(2) test: P < 0.001). The overall drop in the caesarean section rate was significant (χ(2) test: P < 0.001) and inversely correlated with the years (Spearman's ρ: -0.096; P < 0.001). Although complicated pregnancies increased after 2004, the primary caesarean section rate decreased annually by 20% on average in 2005-2011, after practice audits were implemented. Multiple logistic regression showed a positive association between the caesarean delivery rate and the rate of admission to the NICU (adjusted OR: 1.26; 95% CI: 1.14-1.40). CONCLUSION: Patient and staff education and practice audits reduced the Caesarean section rate in a tertiary referral hospital without an increase in admissions to the NICU.

n-type absorber by Cd2+ doping achieves high-performance carbon-based CsPbIBr2 perovskite solar cells.

High efficiency and stability have long been the key issues faced by perovskite solar cells (PSCs). It is found that the CsPbIBr2 all-inorganic perovskite has a suitable band gap and satisfactory stability, so it has attracted much attention. However, the many defects in the CsPbIBr2 film are one of the main problems hindering the improvement of power conversion efficiency (PCE) of the CsPbIBr2 PSCs. The substitution of trace impurities is undoubtedly a simple, cost-effective and efficient strategy. In this work, an appropriate amount of Cd2+ (1.0% mol of Pb2+) is added into the CsPbIBr2 precursor solution to fabricate high quality CsPbIBr2 film with improved crystallinity, reduced trap density, suppressed photo-generated carrier recombination, displayed n-type doping and optimized energy level alignment. The corresponding carbon-based all-inorganic Cd2+-doped CsPbIBr2 PSCs achieve a maximum PCE of 10.63% with a high open circuit voltage (VOC) of 1.324 V, which are much higher than those of the control one with a PCE of 8.48% and an VOC of 1.235 V. The unencapsulated device can still retain more than 92% of the initial PCE when stored at ambient atmosphere (25 °C, relative humidity about 30%) for 40 days.

Enhancing efficiency of perovskite solar cells from surface passivation of Co2+ doped CuGaO2 nanocrystals.

Before completely applying inorganic materials as hole transport materials (HTM) for perovskite solar cells (PSCs), modifying devices with inorganic oxides that have the potential as inorganic hole transporters is an effective way to improve device performance and stability. Co2+ doped CuGaO2 nanocrystals (Co-CuGaO2 NCs) with sizes about 20 nm are synthesized by hydrothermal method and used for surface passivation at the interface of perovskite (PVK)/2,2',7,7'-Tetrakis[N,N-di (4-methoxyphenyl) amino]-9,9'-spirobifluorene (spiroOMeTAD). Co-CuGaO2 NCs have a larger bandgap with lower valance band compared with spiroOMeTAD, which is more beneficial to the conduction of holes and the blocking of electrons. Furthermore, the Co-CuGaO2 has a lower valance band energy compared with the original CuGaO2, which reduces the energy gap between Co-CuGaO2 and PVK. Co-CuGaO2 NCs fully cover the upper surface of PVK, which helps prevent direct contact between PVK and oxygen and moisture. The Co-CuGaO2 NCs surface passivation also gives better hole transport as revealed by the ultraviolet photoelectron spectroscopy (UPS), steady-state photoluminescence (PL), and time-resolved photoluminescence (TRPL) data. When the concentration of Co-CuGaO2 NCs solution is set to 7.5 mg mL-1, the device exhibits a best PCE of 20.39% and maintains 84.34% of the initial power conversion efficiency (PCE) after stored 30 days under air atmosphere with 15 ±â€¯5% humidity.

Potential distribution of three types of ephemeral plants under climate changes.

Background: Arid and semi-arid regions account for about 40% of the world's land surface area, and are the most sensitive areas to climate change, leading to a dramatic expansion of arid regions in recent decades. Ephemeral plants are crucial herbs in this area and are very sensitive to climate change, but it is still unclear which factors can determine the distribution of ephemeral plants and how the distribution of ephemeral plants responds to future climate change across the globe. Aims: Understanding the impact of climate change on ephemeral plant distribution is crucial for sustainable biodiversity conservation. Methods: This study explored the potential distribution of three types of ephemeral plants in arid and semi-arid regions (cold desert, hot desert, and deciduous forest) on a global scale using the MaxEnt software. We used species global occurrence data and 30 environmental factors in scientific collections. Results: Our results showed that (1) the average value of the area under the receiver operating curve (AUC) of each species was higher than 0.95, indicating that the MaxEnt model's simulation accuracy for each species was good; (2) distributions of cold desert and deciduous forest species were mainly determined by soil pH and annual mean temperature; the key factor that determines the distribution of hot desert species was precipitation of the driest month; and (3) the potential distribution of ephemeral plants in the cold desert was increased under one-third of climate scenarios; in the hot desert, the potential suitable distribution for Anastatica hierochuntica was decreased in more than half of the climate scenarios, but Trigonella arabica was increased in more than half of the climate scenarios. In deciduous forests, the ephemeral plant Crocus alatavicus decreased in nearly nine-tenths of climate scenarios, and Gagea filiformis was increased in 75% of climate scenarios. Conclusions: The potential suitable distributions of ephemeral plants in the different ecosystems were closely related to their specific adaptation strategies. These results contribute to a comprehensive understanding of the potential distribution pattern of some ephemeral plants in arid and semi-arid ecosystems.