RESUMO
We have demonstrated broad bandwidth large area (229 mm x 114 mm) multilayer dielectric diffraction gratings for the efficient compression of high energy 800 nm laser pulses at high average power. The gratings are etched in the top layers of an aperiodic (Nb0.5Ta0.5)2O5-SiO2 multilayer coating deposited by ion beam sputtering. The mean efficiency of the grating across the area is better than 97% at the center wavelength and remains above 96% at wavelengths between 820 nm and 780 nm. The gratings were used to compress 5.5 J pulses from a Ti:sapphire laser with an efficiency above 80 percent.
Assuntos
Lasers , Iluminação/instrumentação , Refratometria/instrumentação , Desenho Assistido por Computador , Desenho de Equipamento , Análise de Falha de EquipamentoRESUMO
The spatial coherence of a 13.2 nm transient collisional Ni-like Cd soft X-ray laser pumped at 23 degrees grazing incidence was measured in a series of Young's double-slit experiments. We observed pronounced fringe visibility variations associated with microstructures in the beam's intensity profile. The transverse coherence length was measured to be about 1/20 of the beam diameter and did not significantly improve with longer plasma columns. The equivalent incoherent source size is determined to be 10 mum and the laser's peak spectral brightness ~ 3 x 10(23) photons/sec/mm(2)/mrad(2) within less than 0.01% spectral bandwidth.
RESUMO
We have measured the pulse duration of gain-saturated 13.9 nm Ni-like Ag and 13.2 nm Ni-like Cd transient collisional lasers excited by grazing-incidence-pumping for several pumping conditions. High-resolution streak-camera measurements yielded FWHM pulse durations close to 5 ps for both lasers under optimum pumping conditions. The very high brightness and short pulse duration of these new high repetition tabletop soft x-ray lasers make them an attractive source for dynamic applications.
RESUMO
We demonstrate the generation of an intense soft-x-ray-laser beam by saturated amplification of high harmonic seed pulses in a dense transient collisional soft-x-ray-laser plasma amplifier created by heating a titanium target. Amplification in the 32.6 nm line of Ne-like Ti generates laser pulses of subpicosecond duration that are measured to approach full spatial coherence. The peak spectral brightness is estimated to be approximately 2 x 10(26) photons/(s mm(2) mrad(2) 0.01% bandwidth). The scheme is scalable to produce extremely bright lasers at very short wavelengths with full temporal and spatial coherence.
RESUMO
We have generated a laser average output power of 2 microW at a wavelength of 13.9 nm by operating a tabletop laser-pumped Ni-like Ag laser at a 5 Hz repetition rate, using a solid helicoidal target that is continuously rotated and advanced to renew the target surface between shots. More than 2 x 10(4) soft-x-ray laser shots were obtained by using a single target. Similar results were obtained at 13.2 nm in Ni-like Cd with a Cd-coated target. This scheme will allow uninterrupted operation of laser-pumped tabletop collisional soft-x-ray lasers at a repetition rate of 10 Hz for a period of hours, enabling the generation of continuous high average soft-x-ray powers for applications.
RESUMO
We have acquired images with a spatial resolution better than 38 nm by using a tabletop microscope that combines 13 nm wavelength light from a high-brightness tabletop laser and Fresnel zone plate optics. These results open a gateway to the development of compact and widely available extreme-ultraviolet imaging tools capable of inspecting samples in a variety of environments with a 15-20 nm spatial resolution and a picosecond time resolution.
RESUMO
We report gain-saturated operation of a 13.2 nm table-top laser in Ni-like Cd at a 5 Hz repetition rate. A gain-length product G x L = 17.6 was obtained by heating a precreated plasma with 8 ps duration Ti:sapphire laser pulses with an energy of only 1 J impinging at a grazing angle of 23 degrees. With an average power of approximately 1 muW [corrected] this laser is an attractive coherent source for at-wavelength metrology of extreme UV lithography optics and other applications.
RESUMO
We report saturated operation of an 18.9-nm laser at 5-Hz repetition rate. An amplification with a gain-length product GL of 15.5 is obtained in the 4d 1S0-4p 1P1 laser line of Ni-like Mo in plasmas heated at grazing incidence with approximately 1-J pulses of 8.1-ps duration from a tabletop laser system. Lasing is obtained over a broad range of time delays and pumping conditions. We also measure a GL of 13.5 in the 22.6-nm transition of the same ion. The results are of interest for numerous applications requiring high-repetition-rate lasers at wavelengths below 20 nm.
RESUMO
We have demonstrated the guiding of laser pulses with peak intensities up to 2.2 x 10(17) W/cm(2) in a 5.5 cm long plasma column containing highly charged Ar ions generated by a fast capillary discharge. A rapid discharge-driven hydrodynamic compression guides progressively lower order modes through a plasma with increasing density and degree of ionization, until the guide collapses on axis. The lowest order mode (FWHM approximately 50 microm) is guided with 75% transmission efficiency shortly before the plasma reaches the conditions for lasing in Ne-like Ar. The subsequent rapid plasma expansion forms a significantly leakier and more absorbent guide.