RESUMO
Promoting the hydrogen oxidation reaction (HOR) activity and poisoning tolerance of electrocatalysts is crucial for the large-scale application of hydrogen-oxygen fuel cell. However, it is severely hindered by the scaling relations among different intermediates. Herein, lattice-contracted Pt-Rh in ultrasmall ternary L12-(Pt0.9Rh0.1)3V intermetallic nanoparticles (~2.2â nm) were fabricated to promote the HOR performances through an oxides self-confined growth strategy. The prepared (Pt0.9Rh0.1)3V displayed 5.5/3.7â times promotion in HOR mass/specific activity than Pt/C in pure H2 and dramatically limited activity attenuation in 1000â ppm CO/H2 mixture. In situ Raman spectra tracked the superior anti-CO* capability as a result of compressive strained Pt, and the adsorption of oxygen-containing species was promoted due to the dual-functional effect. Further assisted by density functional theory calculations, both the adsorption of H* and CO* on (Pt0.9Rh0.1)3V were reduced compared with that of Pt due to lattice contraction, while the adsorption of OH* was enhanced by introducing oxyphilic Rh sites. This work provides an effective tactic to stimulate the electrocatalytic performances by optimizing the adsorption of different intermediates severally.
RESUMO
The electrooxidation of catalyst surfaces is across various electrocatalytic reactions, directly impacting their activity, stability and selectivity. Precisely characterizing the electrooxidation on well-defined surfaces is essential to understanding electrocatalytic reactions comprehensively. Herein, we employed in situ Raman spectroscopy to monitor the electrooxidation process of palladium single crystal. Our findings reveal that the Pd surface's initial electrooxidation process involves forming *OH intermediate and ClO4- ions facilitate the deprotonation process, leading to the formation of PdOx. Subsequently, under deep electrooxidation potential range, the oxygen atoms within PdOx contribute to creating surface-bound peroxide species, ultimately resulting in oxygen generation. The adsorption strength of *OH and the coverage of ClO4- can be adjusted by the controllable electronic effect, resulting in different oxidation rates. This study offers valuable insights into elucidating the electrooxidation mechanisms underlying a range of electrocatalytic reactions, thereby contributing to the rational design of catalysts.
RESUMO
Unraveling the origin of Helmholtz capacitance is of paramount importance for understanding the interfacial structure and electrostatic potential distribution of electric double layers (EDL). In this work, we combined the methods of ab initio molecular dynamics and classical molecular dynamics and modeled electrified Cu(100)/electrolyte and graphene/electrolyte interfaces for comparison. It was proposed that the Helmholtz capacitance is composed of three parts connected in series: the usual solvent capacitance, water chemisorption induced capacitance, and Pauling repulsion caused gap capacitance. We found the Helmholtz capacitance of graphene is significantly lower than that of Cu(100), which was attributed to two intrinsic factors. One is that graphene has a wider gap layer at interface, and the other is that graphene is less active for water chemisorption. Finally, based on our findings, we provide suggestions for how to increase the EDL capacitance of graphene-based materials in future work, and we also suggest that the new understanding of the potential distribution across the Helmholtz layer may help explain some experimental phenomena of electrocatalysis.
RESUMO
It is worth understanding the potentials of zero charge (PZCs) and structures of stepped metal/water interfaces, because for many electrocatalytic reactions, stepped surfaces are more active than atomically flat surfaces. Herein, a series of stepped Pt/water interfaces are modeled at different step densities with ab initio molecular dynamics. It is found that the structures of Pt/water interfaces are significantly influenced by the step density, particularly in regard to the distribution of chemisorbed water. The step sites of metal surfaces are more preferred for water chemisorption than terrace sites, and until the step density is very low, water will chemisorb on the terrace. In addition, it is revealed that the PZCs of stepped Pt/water interfaces are generally smaller than that of Pt(111), and the difference is mainly attributed to the difference in their work function, providing a simple way to estimate the PZCs of stepped metal surfaces. Finally, it is interesting to see that the Volta potential difference is almost the same for Pt/water interfaces with different step densities, although their interface structures and magnitude of charge transfer clearly differ.
RESUMO
The study of the oxygen reduction reaction (ORR) at high-index Pt(hkl) single crystal surfaces has received considerable interest due to their well-ordered, typical atomic structures and superior catalytic activities. However, it is difficult to obtain direct spectral evidence of ORR intermediates during reaction processes, especially at high-index Pt(hkl) surfaces. Herein, in situ Raman spectroscopy has been employed to investigate ORR processes at high-index Pt(hkl) surfaces containing the [011Ì ] crystal zone-i.e., Pt(211) and Pt(311). Through control and isotope substitution experiments, in situ spectroscopic evidence of OH and OOH intermediates at Pt(211) and Pt(311) surfaces was successfully obtained. After detailed analysis based on the Raman spectra and theoretical simulation, it was deduced that the difference in adsorption of OOH at high-index surfaces has a significant effect on the ORR activity. This research illuminates and deepens the understanding of the ORR mechanism on high-index Pt(hkl) surfaces and provides theoretical guidance for the rational design of high activity ORR catalysts.
RESUMO
Solid/liquid interfaces are ubiquitous in nature and knowledge of their atomic-level structure is essential in elucidating many phenomena in chemistry, physics, materials science and Earth science1. In electrochemistry, in particular, the detailed structure of interfacial water, such as the orientation and hydrogen-bonding network in electric double layers under bias potentials, has a significant impact on the electrochemical performances of electrode materials2-4. To elucidate the structures of electric double layers at electrochemical interfaces, we combine in situ Raman spectroscopy and ab initio molecular dynamics and distinguish two structural transitions of interfacial water at electrified Au single-crystal electrode surfaces. Towards negative potentials, the interfacial water molecules evolve from structurally 'parallel' to 'one-H-down' and then to 'two-H-down'. Concurrently, the number of hydrogen bonds in the interfacial water also undergoes two transitions. Our findings shed light on the fundamental understanding of electric double layers and electrochemical processes at the interfaces.
RESUMO
The adsorption and electrooxidation of CO molecules at well-defined Pt(hkl) single-crystal electrode surfaces is a key step towards addressing catalyst poisoning mechanisms in fuel cells. Herein, we employed inâ situ electrochemical shell-isolated nanoparticle-enhanced Raman spectroscopy (SHINERS) coupled with theoretical calculation to investigate CO electrooxidation on Pt(hkl) surfaces in acidic solution. We obtained the Raman signal of top- and bridge-site adsorbed CO* molecules on Pt(111) and Pt(100). In contrast, on Pt(110) surfaces only top-site adsorbed CO* was detected during the entire electrooxidation process. Direct spectroscopic evidence for OH* and COOH* species forming on Pt(100) and Pt(111) surfaces was afforded and confirmed subsequently via isotope substitution experiments and DFT calculations. In summary, the formation and adsorption of OH* and COOH* species plays a vital role in expediting the electrooxidation process, which relates with the pre-oxidation peak of CO electrooxidation. This work deepens knowledge of the CO electrooxidation process and provides new perspectives for the design of anti-poisoning and highly effective catalysts.
RESUMO
Investigating the chemical nature of the adsorbed intermediate species on well-defined Cu single crystal substrates is crucial in understanding many electrocatalytic reactions. Herein, we systematically study the early stages of electrochemical oxidation of Cu(111) and polycrystalline Cu surfaces in different pH electrolytes using in situ shell-isolated nanoparticle-enhanced Raman spectroscopy (SHINERS). On Cu(111), for the first time, we identified surface OH species which convert to chemisorbed "O" before forming Cu2O in alkaline (0.01 M KOH) and neutral (0.1 M Na2SO4) electrolytes; while at the Cu(poly) surface, we only detected the presence of surface hydroxide. Whereas, in a strongly acidic solution (0.1 M H2SO4), sulfate replaces the hydroxyl/oxy species. This results improves the understanding of the reaction mechanisms of various electrocatalytic reactions.
RESUMO
It is vital to understand the oxygen reduction reaction (ORR) mechanism at the molecular level for the rational design and synthesis of high activity fuel-cell catalysts. Surface enhanced Raman spectroscopy (SERS) is a powerful technique capable of detecting the bond vibrations of surface species in the low wavenumber range, however, using it to probe practical nanocatalysts remains extremely challenging. Herein, shell-isolated nanoparticle-enhanced Raman spectroscopy (SHINERS) was used to investigate ORR processes on the surface of bimetallic Pt3 Co nanocatalyst structures. Direct spectroscopic evidence of *OOH suggests that ORR undergoes an associative mechanism on Pt3 Co in both acidic and basic environments. Density functional theory (DFT) calculations show that the weak *O adsorption arise from electronic effect on the Pt3 Co surface accounts for enhanced ORR activity. This work shows SHINERS is a promising technique for the real-time observation of catalytic processes.
RESUMO
Cation effects have been shown in numerous experiments to play a significant role in electrocatalysis. To understand these effects at the molecular level, we systematically investigate the structures and capacitances of electric double layers with a variety of cations as counter charges at Pt(111)-COad/water interfaces with ab initio molecular dynamics. It is encouraging to find that the computed Helmholtz capacitances for different cations are in quantitative agreement with experiments, and that the trend of cation effects on capacitances shows clear correlation with the structures of interface cations of differing sizes and hydration energies. More importantly, we demonstrate the Helmholtz capacitance as the key descriptor for measuring the activity of CO-CO dimerization, the rate-determining step for C2+ formation in electroreduction of CO and CO2. Our work provides atomistic insights into cation effects on electric double layers and electrocatalysis that are crucial for optimizing electrode and electrolyte materials.
RESUMO
The comprehensive interpretation of the measured differential Helmholtz capacitance curve is vital for advancing our understanding of the interfacial structure. While several possible physical effects contributing to the Helmholtz capacitance have been proposed theoretically, combining those factors to explain the experimentally observed potential-dependent capacitance profile remains a significant challenge. In this study, we employ ab initio molecular dynamics simulations to model various metal/solution interfaces. Our investigation primarily emphasizes the substantial effect of water chemisorption on the potential-dependent behavior of the Helmholtz capacitance. Additionally, we identify other critical factors that profoundly impact the Helmholtz capacitance: (1) Ions with low hydration energy hinder the availability of surface sites for water adsorption, resulting in a diminished enhancement of capacitance from water chemisorption. (2) Using large-sized ions leads to an expansion of the Helmholtz layer, causing a decrease in the Helmholtz capacitance. (3) Metal surfaces with higher affinity for water attract water adsorption at lower potentials, resulting in a lower peak potential for the differential Helmholtz capacitance curve.
RESUMO
Galactomannan-based biogums were derived from fenugreek, guar, tara, and carob and consisted of mannose and galactose with different ratios, as well as the implementation of high-value utilization was very significant for sustainable development. In this work, renewable and low-cost galactomannan-based biogums were designed and developed as functional coatings protected on the Zn metal anodes. The molecule structure of galactomannan-based biogums were explored on the effect of anticorrosion ability and uniform deposition behavior through the introduction of fenugreek gum, guar gum, tara gum, and carob gum with different ratios of mannose to galactose as 1.2:1, 2:1, 3:1, and 4:1. The existence of biogum protective layers can reduce the contact area between Zn anodes and aqueous electrolyte to enhance the anticorrosion ability of Zn anodes. Rich oxygen-containing groups in galactomannan-based biogums can coordinate with Zn2+ and Zn atoms to form ion conductivity gel layer and adsorb closely on the surface of Zn metal, which can induce uniform deposition of Zn2+ to avoid dendrite growth. Zn electrodes protected by biogums can cycle impressively for 1980 h with 2 mA cm-2 and 2 mAh cm-2. This work can provide a novel strategy to enhance Zn metal anodes' electrochemical performance, as well as implement the high-value application of biomass-based biogums as functional coatings.
Assuntos
Fabaceae , Zinco , Galactose , Manose , Metais , EletrodosRESUMO
The commercial application of high-safety aqueous zinc (Zn) secondary batteries is hindered by the poor cycling life of Zn metal anodes. Here we propose a dendrite growth and hydrogen evolution corrosion reaction mechanism from the binding energy of the deposited crystal plane on the Zn surface and the adsorption energy of H2O molecules on different crystal planes as well as the binding energy of H2O molecules with Zn2+ ions. The biomass-based alkyl polyglucoside (APG) surfactant is adopted as an electrolyte additive of 0.15% to regulate the preferential growth of a parallel Zn(002) plane and enhance the anticorrosion ability of Zn metal anodes. The robust binding and adsorption energies of APG with Zn2+ ions in the aqueous electrolyte and the Zn(002) plane on Zn surface generate a synergistic effect to increase the concentration of Zn2+ ions on the APG-adsorbed Zn(002) plane, endowing the continuous growth of the preferential parallel Zn(002) plane and the excellent anticorrosion capacity. Accordingly, the long-term cycle stability of 4000 h can be achieved for Zn anodes with APG additives, which is better than that with pure ZnSO4 electrolyte. With the addition of APG in the anolyte electrolyte, Zn-I2 full cells display excellent cycling performance (70 mAh g-1 after 20000 cycles) as compared with that without APG additives.
RESUMO
Ruthenium exhibits comparable or even better alkaline hydrogen evolution reaction activity than platinum, however, the mechanistic aspects are yet to be settled, which are elucidated by combining in situ Raman spectroscopy and theoretical calculations herein. We simultaneously capture dynamic spectral evidence of Ru surfaces, interfacial water, *H and *OH intermediates. Ru surfaces exist in different valence states in the reaction potential range, dissociating interfacial water differently and generating two distinct *H, resulting in different activities. The local cation tuning effect of hydrated Na+ ion water and the large work function of high-valence Ru(n+) surfaces promote interfacial water dissociation. Moreover, compared to low-valence Ru(0) surfaces, high-valence Ru(n+) surfaces have more moderate adsorption energies for interfacial water, *H, and *OH. They, therefore, facilitate the activity. Our findings demonstrate the regulation of valence state on interfacial water, intermediates, and finally the catalytic activity, which provide guidelines for the rational design of high-efficiency catalysts.
RESUMO
Electrode potential is the key factor for controlling electrocatalytic reactions at electrochemical interfaces, and moreover, it is also known that the pH and solutes (e.g., cations) of the solution have prominent effects on electrocatalysis. Understanding these effects requires microscopic information on the electrochemical interfaces, in which theoretical simulations can play an important role. This Perspective summarizes the recent progress in method development for modeling electrochemical interfaces, including different methods for describing the electrolytes at the interfaces and different schemes for charging up the electrode surfaces. In the final section, we provide an outlook for future development in modeling methods and their applications to electrocatalysis.
RESUMO
Unraveling the atomistic structures of electric double layers (EDL) at electrified interfaces is of paramount importance for understanding the mechanisms of electrocatalytic reactions and rationally designing electrode materials with better performance. Despite numerous efforts dedicated in the past, a molecular level understanding of the EDL is still lacking. Combining the state-of-the-art ab initio molecular dynamics (AIMD) and recently developed computational standard hydrogen electrode (cSHE) method, it is possible to realistically simulate the EDL under well-defined electrochemical conditions. In this work, we report extensive AIMD calculation of the electrified Pt(111)-Had/water interfaces at the saturation coverage of adsorbed hydrogen (Had) corresponding to the typical hydrogen evolution reaction conditions. We calculate the electrode potentials of a series of EDL models with various surface charge densities using the cSHE method and further obtain the Helmholtz capacitance that agrees with experiment. Furthermore, the AIMD simulations allow for detailed structural analyses of the electrified interfaces, such as the distribution of adsorbate Had and the structures of interface water and counterions, which can in turn explain the computed dielectric property of interface water. Our calculation provides valuable molecular insight into the electrified interfaces and a solid basis for understanding a variety of electrochemical processes occurring inside the EDL.
RESUMO
Potential of zero charge (PZC) is an important reference for understanding the interface charge and structure at a given potential, and its difference from the work function of metal surface (ΦM) is defined as the Volta potential difference (ΔΦ). In this work, we model 11 metal/water interfaces with ab initio molecular dynamics. Interestingly, we find ΔΦ is linearly correlated with the adsorption energy of water (Eads) on the metal surface. It is revealed that the size of Eads directly determines the coverage of chemisorbed water on the metal surface and accordingly affects the interface potential change caused by electron redistribution (ΔΦel). Moreover, ΔΦ is dominated by the electronic component ΔΦel with little orientational dipole contributing, which explains the linear correlation between ΔΦ and Eads. Finally, it is expected that this correlation can be helpful for effectively estimating the ΔΦel and PZC of other metal surfaces in the future work.
RESUMO
Binders play a crucial role in the development of silicon (Si) anodes for lithium-ion batteries with high specific energy. The large volume change of Si (â¼300%) during repeated discharge and charge processes causes the destruction and separation of electrode materials from the copper (Cu) current collector and ultimately results in poor cycling performance. In the present study, we design and prepare hydrogen-bonding cross-linked thiourea-based polymeric binders (denoted CMC-co-SN) in consideration of their excellent binding interaction with the Cu current collector and low cost as well. The CMC-co-SN binders are formed through in situ thermopolymerization of chain-type carboxymethylcellulose sodium (CMC) with thiourea (SN) in the drying process of Si electrode disks. A tight and physical interlocked layer between the CMC-co-SN binder and Cu current collector is derived from a dendritic nonstoichiometric copper sulfide (CuxS) layer on the interface and enhances the binding of electrode materials with the Cu current collector. When applying the CMC-co-SN binders to micro- (â¼3 µm) (µSi) and nano- (â¼50 nm) (nSi) Si particles, the Si anodes exhibit high initial Coulomb efficiency (91.5% for µSi and 83.2% for nSi) and excellent cyclability (1121 mA h g-1 for µSi after 140 cycles and 1083 mA h g-1 for nSi after 300 cycles). The results demonstrate that the CMC-co-SN binders together with a physical interlocked layer have significantly improved the electrochemical performance of Si anodes through strong binding forces with the current collector to maintain electrode integrity and avoid electric contact loss.
RESUMO
Electrified solid/liquid interfaces are the key to many physicochemical processes in a myriad of areas including electrochemistry and colloid science. With tremendous efforts devoted to this topic, it is unexpected that molecular-level understanding of electric double layers is still lacking. Particularly, it is perplexing why compact Helmholtz layers often show bell-shaped differential capacitances on metal electrodes, as this would suggest a negative capacitance in some layer of interface water. Here, we report state-of-the-art ab initio molecular dynamics simulations of electrified Pt(111)/water interfaces, aiming at unraveling the structure and capacitive behavior of interface water. Our calculation reproduces the bell-shaped differential Helmholtz capacitance and shows that the interface water follows the Frumkin adsorption isotherm when varying the electrode potential, leading to a peculiar negative capacitive response. Our work provides valuable insight into the structure and capacitance of interface water, which can help understand important processes in electrocatalysis and energy storage in supercapacitors.