A Comparative Study of the Resorption and Immune Response for Two Starch-Based Hemostat Powders.

INTRODUCTION: Powder hemostats are valuable adjuncts to minimize intraoperative and postoperative complications. In addition to promotion of rapid coagulation, resorption, and biocompatibility are desirable attributes. Plant starch-based polysaccharide hemostat powders are effective and widely used hemostatic agents, however their source and/or processing can affect characteristics such as in vivo degradability. For example, Arista is a purified/hydrolyzed starch powder that is rapidly resorbed in vivo; whereas PerClot shows slow resorption and preservation of a crystalline form. MATERIALS AND METHODS: In the present study, we compared the cellular response to the hemostatic agents PerClot and Arista both in vitro and in vivo, and used potato starch and urinary bladder extracellular matrix (UBM-ECM) as high crystallinity/slowly resorbable and prohealing controls, respectively. RESULTS: All test articles and their degradation products were cytocompatible in vitro as measured by cell viability and metabolic activity of bone-marrow macrophages. PerClot induced a stronger proinflammatory, M1-like macrophage response in vitro (P < 0.001) than Arista, likely due to differences in source composition. Histologic examination of the in vivo surgical site showed the almost complete degradation of Arista after 12 h (day 0), whereas both PerClot and potato starch were still present at 28 d with crystals identifiable with polarized light microscopy and periodic acid Schiff (PAS) staining. Macrophage phenotype in vivo showed no differences between PerClot and Arista. Collagen deposition and mononuclear cell accumulation consistent with an early foreign body response were present around PerClot and potato starch crystals, whereas no such cell or connective tissue deposition was noted at the site of Arista or UBM-ECM placement.

Combination Antibiotic Delivery in PMMA Provides Sustained Broad-Spectrum Antimicrobial Activity and Allows for Postimplantation Refilling.

Antibiotics are commonly added to poly(methyl methacrylate) (PMMA) by surgeons to locally treat infections such as in bone cement for joint replacement surgeries, as well as implantable antimicrobial "beads". However, this strategy is of limited value in high-risk patients where infections can be recurrent or chronic and otherwise hard to treat. Also, when only one drug is incorporated and applied toward polymicrobial infections (multiple bacterial species), there is a high risk that bacteria can develop antibiotic resistance. To combat these limitations, we developed a combination antibiotic PMMA composite system composed of rifampicin-filled ß-cyclodextrin (ß-CD) microparticles added into PMMA filled with a second drug. Different formulations were evaluated through zone of inhibition, drug activity, antibiotic release, and refilling, as well as mechanical studies. Our combination antibiotic PMMA composite system achieved up to an 8-fold increase in the duration of antimicrobial activity in comparison to clinically used antibiotic-filled PMMA. Inclusion of CD microparticles also allowed for refilling of additional antibiotics after simulated implantation, resulting in additional windows of therapeutic efficacy. Mechanical testing showed that our tested formulations did have a small, but significant decrease in mechanical properties when compared to unmodified controls. While further studies are needed to determine whether the tested formulations are still suitable for load-bearing applications (e.g., bone cement), our composites are certainly amenable for a variety of nonload-bearing applications (e.g., antimicrobial "beads" and temporary spacer in two-stage arthroscopic revisions).

PMMA Bone Cement Composite Functions as an Adjuvant Chemotherapeutic Platform for Localized and Multi-Window Release during Bone Reconstruction.

Primary bone tumor resections often result in critical size defects, which then necessitate challenging clinical management approaches to reconstruct. One such intervention is the Masquelet technique, in which poly(methyl methacrylate) (PMMA) bone cement is placed as a spacer temporarily while adjuvant chemotherapeutics are administered systemically. The spacer is later removed and replaced with bone autograft. Local recurrence remains an important and devastating problem, therefore, a system capable of locally delivering chemotherapeutics will present unique advantages. In this work, a refillable chemotherapeutic (doxorubicin, DOX) delivery platform comprised of PMMA bone cement and insoluble γ-cyclodextrin (γ-CD) polymeric microparticles is developed and explored towards application as a temporary adjuvant chemotherapeutic spacer. The system is characterized for porosity, mechanical strength, DOX filling and refilling capacity, elution kinetics, and cytotoxicity. Since residual chemotherapeutics can adversely impact bone healing, it is important that virtually all DOX be released from material. Composites containing 15 wt% γ-CD microparticles demonstrate 100% DOX release within 100 days, whereas only 6% DOX is liberated from PMMA with free DOX over same period. Refillable properties of PMMA composite system may find utility for customizing dosing regimens. Findings suggest that PMMA composites can have potential as chemotherapeutic delivery platforms to assist in bone reconstruction.

Mesenchymal Stem Cell Delivery via Topographically Tenoinductive Collagen Biotextile Enhances Regeneration of Segmental Tendon Defects.

BACKGROUND: Successful management of massive rotator cuff (RC) tendon tears represents a treatment challenge because of the limited intrinsic healing capacity of native tendons and the risk of repair failure. Biologic augmentation of massive RC tears utilizing scaffolds-capable of regenerating bulk tendon tissue to achieve a mechanically functional repair-represents an area of increasing clinical interest. PURPOSE: To investigate the histological and biomechanical outcomes after the use of a novel biologic scaffold fabricated from woven electrochemically aligned collagen (ELAC) threads as a suture-holding, fully load-bearing, defect-bridging scaffold with or without mesenchymal stem cells (MSCs) compared with direct repair in the treatment of critically sized RC defects using a rabbit model. STUDY DESIGN: Controlled laboratory study. METHODS: A total of 34 New Zealand White rabbits underwent iatrogenic creation of a critically sized defect (6 mm) in the infraspinatus tendon of 1 shoulder, with the contralateral shoulder utilized as an intact control. Specimens were divided into 4 groups: (1) gap-negative control without repair; (2) direct repair of the infraspinatus tendon-operative control; (3) tendon repair using ELAC; and (4) tendon repair using ELAC + MSCs. Repair outcomes were assessed at 6 months using micro-computed tomography, biomechanical testing, histology, and immunohistochemistry. RESULTS: Specimens treated with ELAC demonstrated significantly less tendon retraction when compared with the direct repair group specimens (P = .014). ELAC + MSCs possessed comparable biomechanical strength (178 ± 50 N) to intact control shoulders (199 ± 35 N) (P = .554). Histological analyses demonstrated abundant, well-aligned de novo collagen around ELAC threads in both the ELAC and the ELAC + MSC shoulders, with ELAC + MSC specimens demonstrating increased ELAC resorption (7% vs 37%, respectively; P = .002). The presence of extracellular matrix components, collagen type I, and tenomodulin, indicating tendon-like tissue formation, was appreciated in both the ELAC and the ELAC + MSC groups. CONCLUSION: The application of MSCs to ELAC scaffolds improved biomechanical and histological outcomes when compared with direct repair for the treatment of critically sized defects of the RC in a rabbit model. CLINICAL RELEVANCE: This study demonstrates the feasibility of repairing segmental tendon defects with a load-bearing, collagen biotextile in an animal model, showing the potential applicability of RC repair supplementation using allogeneic stem cells.

Recent Advances in the Evaluation of Antimicrobial Materials for Resolution of Orthopedic Implant-Associated Infections In Vivo.

While orthopedic implant-associated infections are rare, revision surgeries resulting from infections incur considerable healthcare costs and represent a substantial research area clinically, in academia, and in industry. In recent years, there have been numerous advances in the development of antimicrobial strategies for the prevention and treatment of orthopedic implant-associated infections which offer promise to improve the limitations of existing delivery systems through local and controlled release of antimicrobial agents. Prior to translation to in vivo orthopedic implant-associated infection models, the properties (e.g., degradation, antimicrobial activity, biocompatibility) of the antimicrobial materials can be evaluated in subcutaneous implant in vivo models. The antimicrobial materials are then incorporated into in vivo implant models to evaluate the efficacy of using the material to prevent or treat implant-associated infections. Recent technological advances such as 3D-printing, bacterial genomic sequencing, and real-time in vivo imaging of infection and inflammation have contributed to the development of preclinical implant-associated infection models that more effectively recapitulate the clinical presentation of infections and improve the evaluation of antimicrobial materials. This Review highlights the advantages and limitations of antimicrobial materials used in conjunction with orthopedic implants for the prevention and treatment of orthopedic implant-associated infections and discusses how these materials are evaluated in preclinical in vivo models. This analysis serves as a resource for biomaterial researchers in the selection of an appropriate orthopedic implant-associated infection preclinical model to evaluate novel antimicrobial materials.

Nonthermal plasma treatment of polymers modulates biological fouling but can cause material embrittlement.

Plasma-based treatment is a prevalent strategy to alter biological response and enhance biomaterial coating quality at the surfaces of biomedical devices and implants, especially polymeric materials. Plasma, an ionized gas, is often thought to have negligible effects on the bulk properties of prosthetic substrates given that it alters the surface chemistry on only the outermost few nanometers of material. However, no studies to date have systematically explored the effects of plasma exposure on both the surface and bulk properties of a biomaterial. This work examines the time-dependent effects of a nonthermal plasma on the surface and bulk (i.e. mechanical) properties of polymeric implants, specifically polypropylene surgical meshes and sutures. Findings suggest that plasma exposure improved resistance to fibrinogen adsorption and Escherichia coli attachment, and promoted mammalian fibroblast attachment, although increased duration of exposure resulted in a state of diminishing returns. At the same time, it was observed that plasma exposure can be detrimental to the material properties of individual filaments (i.e. sutures), as well as the structural characteristics of knitted meshes, with longer exposures resulting in further embrittlement and larger changes in anisotropic behavior. Though there are few guidelines regarding appropriate mechanical properties of surgical textiles, the results from this investigation imply that there are ultimate exposure limits for plasma-based treatments of polymeric implant materials when structural properties must be preserved, and that the effects of a plasma on a given biomaterial should be examined carefully before translation to a clinical scenario.

Modified Cyclodextrin Microparticles to Improve PMMA Drug Delivery Without Mechanical Loss.

Antibiotic-loaded poly(methyl methacrylate) (PMMA) cement is commonly used as a local delivery system to treat and prevent orthopedic infections associated with arthroplasties in load-bearing applications. However, these delivery systems are inefficient as release rate sharply declines to subinhibitory levels. Prior studies have shown that by adding in drug-filled cyclodextrin (CD) microparticles into PMMA cement, a more consistent release is observed, and antibiotic refilling through simulated implantation can be achieved. However, the mechanical strengths of PMMA is reduced. In order to decrease the mechanical loss, modified CD microparticles (PMMA-CD) are synthesized that contain covalently appended PMMA chains. The compressive strengths, handling characteristics, and refilling ability of PMMA cement with PMMA-CD are evaluated. Specifically, up to a 13.7% increase in compressive strength is observed when unmodified CD is substituted with PMMA-CD in PMMA samples with 10 wt% CD microparticles. Additionally, a 13.3% increase in working time, a 7.5% decrease in maximum polymerization temperature, and up to a 32.1% increase in amount of drug refilled are observed with the addition of 10 wt% CD PMMA-CD into PMMA in comparison to plain PMMA without CD microparticles.

Characterization of Inflammatory and Fibrotic Encapsulation Responses of Implanted Materials with Bacterial Infection.

Medical device infections are costly, while preclinical assessment of antimicrobial properties for new materials is time intensive and imperfect at capturing the interrelated aspects of infection response and wound resolution. Herein, we developed an in vivo model for quantification of inflammatory and biocompatibility responses in the presence of a sustained implant-associated infection. The antimicrobial effectiveness of commercially available polymer materials was compared to that of thermoplastic polyurethane (TPU) materials modified with putative antimicrobial strategies as example test materials. Materials were incubated with bioluminescent Escherichia coli prior to implantation in a dorsal subcutaneous pocket in rats with an additional intraluminal bolus of bacteria. Infection kinetics were monitored with bioluminescence, and inflammatory infiltrate and fibrous capsule thickness were determined from stained histological sections. Our model resulted in a persistent infection, sensitive to antimicrobial effects, as the materials modified with a putative antimicrobial surface were able to significantly reduce the level of infection in animals at day 4 postimplantation with efficacy similar to that of commercially available antimicrobial drug-eluting polymers (positive controls). At day 30 postimplantation, the antimicrobial surface modified TPU tubing was found to promote complete elimination of intraluminal bacteria in the absence of antibiotics. Differences were also measurable in acute inflammation, as Wright-Giemsa staining demonstrated reduced inflammatory cell infiltration at day 4 postimplantation for antimicrobial TPU materials. Additionally, antimicrobial materials exhibited reduced fibrous capsule thickness coinciding with infection resolution, as compared to unmodified TPU controls. The developed model can be utilized for testing antimicrobial polymers in the context of a prolonged infection while also revealing concurrent differences in the infiltrating immune cell profiles and fibrous capsule thickness, thus improving the relevance of preclinical medical device material testing.

Poly(methyl methacrylate) Bone Cement Composite Can Be Refilled with Antibiotics after Implantation in Femur or Soft Tissue.

While periprosthetic joint infections (PJIs) result in a small percentage of patients following arthroplasties, they are challenging to treat if they spread into bone and soft tissue. Treatment involves delivering antibiotics using poly(methyl methacrylate) (PMMA) bone cement. However, antibiotic release is insufficient for prolonged infections. Previous work demonstrated efficacy of incorporating insoluble cyclodextrin (CD) microparticles into PMMA to improve antibiotic release and allow for post-implantation drug refilling to occur in a tissue-mimicking model. To simulate how antibiotic refilling may be possible in more physiologically relevant models, this work investigated development of bone and muscle refilling models. The bone refilling model involved embedding PMMA-CD into rabbit femur and administering antibiotic via intraosseous infusion. Muscle tissue refilling model involved implanting PMMA-CD beads in bovine muscle tissue and administering antibiotic via tissue injection. Duration of antimicrobial activity of refilled PMMA-CD was evaluated. PMMA-CD composite in bone and muscle tissue models was capable of being refilled with antibiotics and resulted in prolonged antimicrobial activity. PMMA-CD provided sustained and on-demand antimicrobial activity without removal of implant if infection develops. Intraosseous infusion appeared to be a viable technique to enable refilling of PMMA-CD after implantation in bone, reporting for the first time the ability to refill PMMA in bone.

A Polymeric Delivery System Enables Controlled Release of Genipin for Spatially-Confined In Situ Crosslinking of Injured Connective Tissues.

An emerging approach toward repair of connective tissues applies exogenous crosslinkers to mechanically augment injured structures in vivo. One crosslinker that has been explored for this purpose is the plant-derived small molecule genipin. However, genipin's high reactivity to primary amines in proteins, small size, and high diffusion coefficient necessitate localizing and controlling its delivery to avoid off-target or adverse effects. In this study, genipin-loaded polymers were evaluated for sustained local administration. Insoluble polymers comprising subunits of α-, ß-, or γ-cyclodextrin, cyclic oligosaccharides possessing increasing cavity sizes, were compared to polymers comprising subunits of the non-cyclic polysaccharide dextran. Polymers made from ß-cyclodextrin showed prolonged genipin release for over ten times longer than polymers made from α- or γ-cyclodextrins or dextran, indicating that genipin possesses molecular affinity for the ß-cyclodextrin cavity. Modeling of complexation between genipin and cyclodextrin hosts supported this finding. Genipin released from all polymers was confirmed to be functional by exogenous collagen crosslinking through fluorometric and mechanical readouts. Co-incubation of genipin-loaded polymers with bovine tendon explants showed genipin crosslink-mediated coloration that was confined to the sites of exposure. Altogether, results indicate that host-guest interactions within a polymeric delivery vehicle can help to control and confine genipin release.

Antibiotic Refilling, Antimicrobial Activity, and Mechanical Strength of PMMA Bone Cement Composites Critically Depend on the Processing Technique.

Antibiotic-laden poly(methyl methacrylate) (PMMA) bone cement is used in a variety of applications including temporary spacers for load-bearing arthroplasties and non-load bearing orthopedic revision procedures and antibiotic beads to treat infections. Depending upon the surgical preparation technique, properties of PMMA can widely vary. The primary objective of this work was to perform an in-depth structure-function analysis regarding how processing of PMMA impacted material and structural properties (i.e., porosity) and downstream functional properties (i.e., drug refilling and strength). PMMA with cyclodextrin (CD) microparticles was generated via hand- or vacuum-mixing and characterized for material and structural properties including porosity and internal morphology and functional properties of drug refilling, compressive strength, and antimicrobial activity. CD microparticles were incorporated into PMMA to enable functional refilling properties and to determine new information on drug distribution and distance or depth of PMMA which the refilled drug was able to penetrate. Vacuum-mixing of PMMA resulted in improved mechanical strength and allowed for incorporation of greater amounts of CD microparticles but less homogeneity relative to hand-mixing. Refilling studies showed shallow penetration of the drug into PMMA samples without CD. However, PMMA with CD microparticles showed increased depth of drug penetration, indicating that the drug could be delivered deeper within the device, resulting in more drug being available for delivery and more opportunity for later antibiotic refilling on a patient-specific basis. Knowledge of structure-function relationships can assist and provide valuable information in design and optimization of PMMA-CD for specific load-bearing or non-load-bearing applications.

Use of affinity allows anti-inflammatory and anti-microbial dual release that matches suture wound resolution.

Surgical sutures are vulnerable to bacterial infections and biofilm formation. At the suture site, pain and undesirable, excess inflammation are additionally detrimental to wound healing. The development of a polymerized cyclodextrin (pCD) coated surgical suture introduces the capability to locally deliver both anti-inflammatory and anti-microbial drugs throughout the phases of acute and chronic healing. Local delivery allows for the improvement of wound healing while reducing related systemic side effects and drug resistance. Through testing, it has been shown that the fabrication of our pCD coating minimally affects the suture's mechanical properties. In vitro studies show measurable and consistent drug delivery for nearly 5 weeks. The therapeutic level of this delivery is sufficient to show inhibition of bacterial growth for 4 weeks, and free-radical scavenging (an in vitro anti-inflammatory activity approximation) for 2 weeks. With this pCD coating technique, we maintain clinical performance standards while also introducing a long-term dual delivery system relevant to the wound healing timeframe. © 2019 Wiley Periodicals, Inc. J Biomed Mater Res Part A, 2019.

Woven collagen biotextiles enable mechanically functional rotator cuff tendon regeneration during repair of segmental tendon defects in vivo.

Despite advancements in surgical techniques and materials for rotator cuff repair procedures, primary repair failures remain common. This study examines the use of electrochemically aligned collagen (ELAC) threads woven into biotextile scaffolds as grafts to repair critical infraspinatus tendon defects in New Zealand White rabbits. Three surgical treatment groups were evaluated: rabbits undergoing direct repair as operative controls, rabbits receiving ELAC scaffolds alone, and rabbits treated with mesenchymal stem cell (MSC)-seeded ELAC scaffolds. In each animal, the intact, contralateral infraspinatus served as an internal positive control. Tendon-bone constructs were harvested after 3 months in vivo and outcome measures included biomechanical testing, histological staining, and immunohistochemical staining. Biomechanical testing revealed that maximum load-bearing capacity was comparable between all groups, while MSC-seeded scaffold repairs exhibited increased stiffness relative to non-seeded scaffold repairs. Histological staining revealed robust collagen deposition around ELAC fibers and increased cellularity within the continuum of woven scaffolds as compared to native tendon. Immunohistochemical staining revealed presence of collagens I and III in all groups, but procollagen I and the tendon-specific marker tenomodulin were only observed in seeded and non-seeded ELAC scaffold repairs. Findings of this pilot study warrant continued investigation of ELAC biotextile scaffolds for repair of critically-sized rotator cuff tendon defects. © 2018 Wiley Periodicals, Inc. J Biomed Mater Res Part B: Appl Biomater 107B: 1864-1876, 2019.

An Additive to PMMA Bone Cement Enables Postimplantation Drug Refilling, Broadens Range of Compatible Antibiotics, and Prolongs Antimicrobial Therapy.

Poly(methyl methacrylate) (PMMA) bone cement is used in several biomedical applications including as antibiotic-filled beads, temporary skeletal spacers, and cement for orthopedic implant fixation. To mitigate infection following surgery, antibiotics are often mixed into bone cement to achieve local delivery. However, since implanted cement is often structural, incorporated antibiotics must not compromise mechanical properties; this limits the selection of compatible antibiotics. Furthermore, antibiotics cannot be added to resolve future infections once cement is implanted. Finally, delivery from cement is suboptimal as incorporated antibiotics exhibit early burst release with most of the drug remaining permanently trapped. This prolonged subtherapeutic dosage drives pathogen antibiotic resistance. To overcome these limitations of antibiotic-laden bone cement, insoluble cyclodextrin (CD) microparticles are incorporated into PMMA to provide more sustained delivery of a broader range of drugs, without impacting mechanics. PMMA formulations with and without CD microparticles are synthesized and filled with one of three antibiotics and evaluated using zone of inhibition, drug release, and compression studies. Additionally, the ability of PMMA with microparticles to serve as a refillable antibiotic delivery depot is explored. Findings suggest that addition of CD microparticles to cement promotes postimplantation antibiotic refilling and enables incorporation of previously incompatible antibiotics while preserving favorable mechanical properties.

Effects of PDGF-BB delivery from heparinized collagen sutures on the healing of lacerated chicken flexor tendon in vivo.

Flexor tendon lacerations are traditionally repaired by using non-absorbable monofilament sutures. Recent investigations have explored to improve the healing process by growth factor delivery from the sutures. However, it is difficult to conjugate growth factors to nylon or other synthetic sutures. This study explores the performance of a novel electrochemically aligned collagen suture in a flexor tendon repair model with and without platelet derived growth factor following complete tendon laceration in vivo. Collagen suture was fabricated via electrochemical alignment process. Heparin was covalently bound to electrochemically aligned collagen sutures (ELAS) to facilitate affinity bound delivery of platelet-derived growth factor-BB (PDGF-BB). Complete laceration of the flexor digitorum profundus in the third digit of the foot was performed in 36 skeletally mature White Leghorn chickens. The left foot was used as the positive control. Animals were randomly divided into three groups: control specimens treated with standard nylon suture (n=12), specimens repaired with heparinated ELAS suture without PDGF-BB (n=12) and specimens repaired with heparinated ELAS suture with affinity bound PDGF-BB (n=12). Specimens were harvested at either 4weeks or 12weeks following tendon repair. Differences between groups were evaluated by the degree of gross tendon excursion, failure load/stress, stiffness/modulus, absorbed energy at failure, elongation/strain at failure. Quantitative histological scoring was performed to assess cellularity and vascularity. Closed flexion angle measurements demonstrated no significant differences in tendon excursion between the study groups at 4 or 12weeks. Biomechanical testing showed that the group treated with PDGF-BB bound heparinated ELAS suture had significantly higher stiffness and failure load (p<0.05) at 12-weeks relative to both heparinated ELAS suture and nylon suture. Similarly, the group treated with PDGF-BB bound suture had significantly higher ultimate tensile strength and Young's modulus (p<0.05) at 12-weeks relative to both ELAS suture and nylon suture. Compared to nylon controls, heparinized ELAS with PDGF-BB improved biomechanics and vascularity during tendon healing by 12-weeks following primary repair. The ability of ELAS to deliver PDGF-BB to the lacerated area of tendon presents investigators with a functional bioinductive platform to improve repair outcomes following flexor tendon repair. STATEMENT OF SIGNIFICANCE: A high strength aligned collagen suture was fabricated via linear electrocompaction and heparinized for prolonged delivery of PDFG-BB. When it was used to suture a complete lacerated flexor tendon in a chicken model controlled release of the PDGF-BB improved the strength of treated tendon after 12 weeks compared to tendon sutured with commercial nylon suture. Furthermore, Collagen suture with affinity bound PDGF-BB enhanced the vascularization and remodeling of lacerated tendon when it compare to synthetic nylon suture. Overall, electrocompacted collagen sutures holds potential to improve repair outcome in flexor tendon surgeries by improving repair strength and stiffness, vascularity, and remodeling via sustained delivery of the PDGF-BB. The bioinductive collagen suture introduces a platform for sustained delivery of other growth factors for a wide-array of applications.