A floating type holographic display.

A floating image type holographic display which projects an electronically generated holographic image together with a background image displayed on a monitor/TV to enhance the visual effects of the former image is introduced. This display can display a holographic image with a spatial volume floating in the front space of the display with use of PDLC sheets as the focused plane of the image. This display can preserve and enhance the main property of holographic image from a display chip, i.e., a spatial image with a volume. This property had not been appealed by the previous holographic displays due to the much brighter active surface image accompanied with the reconstructed image and the diffuser used for viewing the image.

Holographic display based on a spatial DMD array.

The image space of the reconstructed image from the hologram displayed on a digital micromirror device (DMD) is defined by the diffraction pattern induced by the 2D pixel pattern of the DMD, which works as a 2D blazed grating. Within this space, a reconstructed image of 100 mm × 20 mm is spatially multiplexed by a 2 × 5 DMD array that is aligned on a board, without using any extra optics. Each DMD chip reconstructs an image piece of the size 20 mm (width) × 10 mm (height). The reconstructed image looks somewhat noisy but regenerates the original object image faithfully.

Wavefront Characteristics of a Digital Holographic Optical Element.

In this study, a 50 × 50 mm holographic optical element (HOE) with the property of a spherical mirror was recorded digitally on a silver halide photoplate using a wavefront printing method. It consisted of 51 × 96 hologram spots with each spot measuring 0.98 × 0.52 mm. The wavefronts and optical performance of the HOE were compared with those of reconstructed images from a point hologram displayed on DMDs of different pixel structures. The same comparison was also performed with an analog-type HOE for a heads-up display and with a spherical mirror. A Shack-Hartmann wavefront sensor was used to measure the wavefronts of the diffracted beams from the digital HOE and the holograms as well as the reflected beam from the analog HOE and the mirror when a collimated beam was incident on them. These comparisons revealed that the digital HOE could perform as a spherical mirror, but they also revealed astigmatism-as in the reconstructed images from the holograms on DMDs-and that its focusability was worse than that of the analog HOE and the spherical mirror. A phase map, i.e., the polar coordinate-type presentation of the wavefront, could visualize the wavefront distortions more clearly than the reconstructed wavefronts obtained using Zernike polynomials. The phase map revealed that the wavefront of the digital HOE was more distorted than those of the analog HOE and the spherical mirror.

Characteristics of composite images in multiview imaging and integral photography.

The compositions of images projected to a viewer's eyes from the various viewing regions of the viewing zone formed in one-dimensional integral photography (IP) and multiview imaging (MV) are identified. These compositions indicate that they are made up of pieces from different view images. Comparisons of the composite images with images composited at various regions of imaging space formed by camera arrays for multiview image acquisition reveal that the composite images do not involve any scene folding in the central viewing zone for either MV or IP. However, in the IP case, compositions from neighboring viewing regions aligned in the horizontal direction have reversed disparities, but in the viewing regions between the central and side viewing zones, no reversed disparities are expected. However, MV does exhibit them.