Influence of limited mouth opening in children on intraoral scanning accuracy: An in vitro study.

BACKGROUND: Although intraoral scanning is highly reliable, little is known about its accuracy in young children with limited mouth-opening ability. AIM: To determine the accuracy of intraoral scans based on the degree of mouth opening. DESIGN: To simulate mouth opening in children with primary dentition, three groups (n = 5 per group) were allocated by maximum mouth opening of 30, 37 and 40 mm. After the primary dentition model was connected to a dental phantom, intraoral scanning was performed using iTero and TRIOS4. The scanned files were digitally evaluated. Root mean square values were calculated to assess trueness and precision. RESULTS: iTero showed deviations of three-dimensional trueness of 0.067 ± 0.008, 0.063 ± 0.001 and 0.065 ± 0.005 mm, and TRIOS4 of 0.07 ± 0.002, 0.064 ± 0.003 and 0.066 ± 0.002 mm in the 30, 37 and 40 mm groups, respectively. There were no significant differences in either mouth opening (p > .017) or the intraoral scanners (p > .05). The same statistical results were obtained for precision, with the exception of the 30 mm of mouth opening. CONCLUSIONS: Within the limits of this study, limited mouth opening hardly influenced the accuracy of intraoral scanning.

Determination of the range of intervention timing for supernumerary teeth using the Korean health insurance review and assessment service database.

This study aimed to identify the frequency of complications during the diagnosis, observation, and treatment of supernumerary teeth or odontomas and evaluate the relationship between complications and the timing of surgical intervention. This study was conducted based on data from the Korea Health Insurance Review and Assessment Service between January 2008 and December 2019. A 2-year washout period was applied, and a follow-up period of at least 2 years was also included. During the observation period, the age at diagnosis of supernumerary teeth and odontomas was analyzed using major diagnostic codes, and the treatment codes were used to determine the interval between diagnosis and surgical intervention. The incidence rates of supernumerary teeth (1.21%) and odontomas (0.36%) were comparable to that reported in previous studies. The frequency of supernumerary teeth was the highest in the anterior region, followed by the premolar and molar regions. The average ages at diagnosis according to the location of the supernumerary teeth were 7.25, 13.98, and 16.11 years in the anterior, premolar, and molar regions, respectively. The age at diagnosis correlated with the maturity period of the teeth at the corresponding location. For the supernumerary tooth group, surgical intervention was more likely to occur when malocclusion (p < 0.0001) or tooth eruption disturbances (p < 0.0001) were present or dentigerous cysts were absent (p = 0.006). For the odontoma group, malocclusion (p = 0.251) was not correlated with surgical intervention. When tooth eruption disturbances (p = 0.002) and dentigerous cysts (p < 0.0001) were present, surgical intervention was more likely to occur. Pediatric dentists should conduct timely clinical checks and periodic follow-ups to prevent complications and unnecessary orthodontic treatments in patients with supernumerary teeth or odontomas.

Bisphenol A release from commercially available 3-dimensionally printed resins and human cell apoptosis to bisphenol A: an in-vitro study.

Bisphenol A (BPA) from dental materials may be linked to children's health issues. This study aimed to assess the release of BPA from commercially available 3-dimensional (3D)-printed resin materials and evaluate BPA-related apoptotic effects on human periodontal ligament cells and gingival fibroblasts. Commercially available 3D-printed resin materials for prosthodontic use were selected as follows: NextDent C&B MFH (3D Systems, Rock Hill, SC, USA), DIOnavi-P. MAX (Dio Co., Busan, Korea), and DIOnavi-Denture02 (Dio Co., Busan, Korea). Identical cuboidal samples (1 cm × 1 cm × 0.5 cm) were printed from the materials and cured. BPA release was assessed using liquid chromatography/mass spectrometry (LC/MS). In addition, human gingival fibroblasts and periodontal ligament cells were exposed to various BPA solutions based on the LC/MS results. Cell Counting kit-8 (CCK-8) and real-time polymerase chain reaction analyses were performed to evaluate BPA-related apoptotic effects. The LC/MS analysis confirmed that none of the 3D-printed resin materials released BPA after curing. Both human gingival fibroblasts and periodontal ligament cells showed lower viability after BPA exposure. Regarding apoptosis-related gene expression, Caspase10 (CASP10) expression in periodontal ligament cells was significantly different in the BPA solutions (p < 0.05). The expression of BAX and Capspase8 (CASP8) in gingival fibroblasts was significantly increased by BPA in a dose-dependent manner (p < 0.05). Within the limitations of this study, the 3D-printed resin materials were not found to release BPA. This finding implies that 3D-printed resin materials are not associated with potential BPA-related risks in children.

Three-dimensional evaluation of tooth preparation forms in paediatric zirconia crowns: An in vitro study.

BACKGROUND: Though prefabricated zirconia crowns (PZCs) differ from stainless steel crowns and have different preparation guidelines for optimal crown adaptation, little is known about how clinicians prepare teeth for PZCs. AIM: To investigate the prepared tooth forms for PZCs and identify the shared patterns of tooth preparation. DESIGN: Twenty participants prepared primary maxillary first molars and mandibular second molars for PZCs. A model with ideally prepared tooth was digitally generated as a reference. The prepared teeth were digitally scanned and superimposed on the reference. Three-dimensional analysis software was used to evaluate the discrepancy between ideal and prepared surface for overall surface and subdivided area. RESULTS: Half of the surfaces received excessive reduction, and 24% showed error within 0.2 mm (p < .001) in maxilla. 41.6% of surfaces showed error within 0.2 mm, and 20% were excessively prepared (p = .002) in mandible. The highest discrepancies were found at the mesiopalatal line angles (maxillary) and at the distobuccal line angles (mandibular). Significant discrepancies were observed on the occlusal surfaces, especially at the cusps. CONCLUSIONS: Tooth preparations for PZCs showed wide variations related to depth among the participants.

The perspective of undergraduate dental students on web-based learning in pediatric dentistry during the COVID-19 pandemic: a Korean multicenter cross-sectional survey.

BACKGROUND: The COVID-19 pandemic changed the world and created a shift in the dental education program. This sudden change in the dental education program may have affected the academic standards of dental students. This study aimed to evaluate the overall satisfaction and effectiveness of online learning in pediatric dentistry of undergraduate dental students' during the COVID-19 pandemic in South Korea. METHODS: An anonymous online survey was sent to three dental schools, and responses were collected from dental school students. Questions included the demographics, perspectives of online classes, comparison of online and offline pediatric dentistry classes and opinions on how dental schools are handling the pandemic. Students' perspectives on online classes were evaluated based on satisfaction with online education. Data were analyzed using the Kruskal-Wallis test and the Mann-Whitney U test. RESULTS: Most students took online classes from home (80.9%) using Zoom (50.4%). The majority reported overall program satisfaction (74.1%) and agreed that universities implemented online classes well (55%). Students who were in favor of online classes responded more positively to questions on the effectiveness and safety of online learning (p < 0.05). Regardless of satisfaction with online education, the students agreed that the online education shift was the right decision in pandemic outbreak. CONCLUSIONS: Dental students in South Korea preferred and adapted well to the web-based learning program in pediatric dentistry during COVID-19 pandemic.

Deferoxamine Reduces Inflammation and Osteoclastogenesis in Avulsed Teeth.

Replacement and inflammatory resorption are serious complications associated with the delayed replantation of avulsed teeth. In this study, we aimed to assess whether deferoxamine (DFO) can suppress inflammation and osteoclastogenesis in vitro and attenuate inflammation and bone resorption in a replanted rat tooth model. Cell viability and inflammation were evaluated in RAW264.7 cells. Osteoclastogenesis was confirmed by tartrate-resistant acid phosphatase staining, reactive oxygen species (ROS) measurement, and quantitative reverse transcriptase-polymerase chain reaction in teeth exposed to different concentrations of DFO. In vivo, molars of 31 six-week-old male Sprague-Dawley rats were extracted and stored in saline (n = 10) or DFO solution (n = 21) before replantation. Micro-computed tomography (micro-CT) imaging and histological analysis were performed to evaluate inflammation and root and alveolar bone resorption. DFO downregulated the genes related to inflammation and osteoclastogenesis. DFO also reduced ROS production and regulated specific pathways. Furthermore, the results of the micro-CT and histological analyses provided evidence of the decrease in inflammation and hard tissue resorption in the DFO group. Overall, these results suggest that DFO reduces inflammation and osteoclastogenesis in a tooth replantation model, and thus, it has to be further investigated as a root surface treatment option for an avulsed tooth.

Validation of a three-dimensional printed model for training of surgical extraction of supernumerary teeth.

INTRODUCTION: This study aimed to validate a three-dimensional (3D) printed model to provide training for supernumerary teeth (SNTs) extraction. MATERIALS AND METHODS: Each of the 30 participants, grouped as experienced and without experience, conducted two identically simulated surgeries on a 3D-printed replica of human mixed dentition with a SNT. The surgery time, area of bony window and volume of removed material were measured; subsequently, responses to a five-item questionnaire were recorded. The collected data were statistically analysed. RESULTS: The surgery time was 228.37 ± 141.53 seconds and 125.47 ± 53.03 seconds in the first and second surgery, respectively. The training significantly decreased the surgery time in the participants without experience (P = .000). However, there were no significant differences in the area of window opening (P = .271) and volume of removed material between the two surgeries (P = .075). The participants who perceived educational benefits accounted for more than 60% of the respondents for every question. Participants without experience in SNT extraction showed a tendency to rate a higher score than did those with experience. CONCLUSIONS: A 3D-printed model for surgical extraction of a SNT can improve surgical skill and, especially, shorten the learning curve in beginners.

Three-Dimensional Digitalized Surface and Volumetric Analysis of Posterior Prefabricated Zirconia Crowns for Children.

Objectives: This study was designed to compare the surface morphologies and volumes of posterior prefabricated zirconia crowns and posterior stainless steel crowns (SSCs) using digitalized three-dimensional (3D) reconstructed images. Study design: We tested prefabricated zirconia crowns (NuSmile ZR; Orthodontic Technologies, Houston, TX, USA) and SSCs (Kids Crown; Shinhung, Seoul, Korea) used to restore left maxillary and mandibular molars. A Rainbow scanner (Dentium, Seoul, Korea) was used to digitise the inner and outer surface morphologies of all crowns. The data were superimposed and evaluated using 3D software. The differences between the outer and inner surfaces and inner volume were measured. Results: The differences between the two types of crowns differed by tooth surface. At the occlusal surface, the differences were greater at the cusp tip than the fossa. At the axial level, the differences decreased toward the gingival margins. Also, relative volumetric ratios varied. Conclusions: Tooth preparation prior to placement of prefabricated zirconia crowns requires special consideration. Greater amounts of tooth reduction are necessary for posterior zirconia crowns than for SSCs. The occlusal surface requires more tooth reduction than the axial surface and the gingival margin.

Correlation between Dental Maturity and Body Mass Index in Korean Children.

Objective: The aim of this study was to determine relationships between dental maturity and body mass index (BMI) in Korean children. Study Design: 600 Korean children aged between 5 and 10 years for whom panoramic radiographs have been obtained between 2010 and 2017 were selected. Subjects were divided into four weight-status groups: underweight, normal weight, overweight, and obese. Five lower-left permanent teeth were observed and rated. The stage of each tooth was converted into a score using the table suggested by Demirjian, and the sum of these scores was designated as the 'maturity score'. Results: This study found statistically significant differences in dental maturity between the weight groups (analysis of variance, P=0.003), with the maturity score being higher in the obese group than in normal-weight subjects (Tukey's post-hoc test, P=0.004). The linear regression showed a positive association between BMI and the maturity score after adjusting for sex and age (ß=0.34, P<0.001). The linear regression coefficient was higher in girls (ß=0.61, P<0.001) than in boys (ß=0.31, P=0.02). Conclusions: These data suggest that dental maturation is positively associated with BMI in Korean children. Since many treatment decisions are made in relation to dental maturity, these findings may have implications for pediatric dental care.

A retrospective study of traumatic dental injuries in primary dentition: treatment outcomes of splinting.

OBJECTIVE: Splinting in primary dentition is limited to several traumatic dental injuries. The prognosis associated with splint use has not been fully investigated. In this study, we investigated the outcomes of traumatic injuries in primary teeth treated with splinting. MATERIALS AND METHODS: We retrospectively analysed 137 children with root fractures and lateral and extrusive luxation injuries to their primary teeth who were treated with semi-rigid splints between 2010 and 2016. Treatment outcomes were analysed in patients with follow-up periods of >6 months. The outcomes of splinting were based on clinical and radiographic evaluations performed during follow-up examinations. RESULTS: In total, 182 primary teeth were examined, and of these, 90 teeth were treated using semi-rigid splints. In the splint group, pathological root resorption (31.1%) was the most common complication, whereas pathological tooth loss (25.0%) was found most common in the observation group. Splinting in root fractures showed a good prognosis, whereas in lateral and extrusive luxations, it did not (p < .05). There were no relationship between treatment delay and prognosis (p > .05). CONCLUSIONS: Depending on the type of luxation, splint therapy results in acceptable outcomes and may be a feasible treatment option.

Analysis of bacterial community profiles of endodontically infected primary teeth using pyrosequencing.

OBJECTIVE: The purpose of this study was to identify the endodontic microbiome in primary teeth with dental caries using high-throughput pyrosequencing and to establish data on the oral microbiome of primary teeth with endodontic infection. METHODS: Ten primary teeth with dental caries and endodontic infection were included. Samples were collected from root canals using sterilized paper points and analyzed by pyrosequencing, based on the V1-V3 hypervariable region of the 16S rRNA gene. The data were analyzed using the CLcommunity software. RESULTS: Analysis of the 10 samples yielded a total of 64,291 16S rRNA gene sequences. In total, 1586 OTUs (range, 91-235), six bacterial phyla, including unclassified, and 187 genera were assigned. At the genus level, Neisseria (group A), Acinetobacter (group B), and Fusobacterium (group C) were prominent. These predominant microorganisms were associated with the clinical condition and reflected the progression of endodontic infection in primary teeth. CONCLUSIONS: This study revealed a relationship between the oral microbiome and endodontic infection in primary teeth. Additionally, anaerobic bacteria such as Fusobacterium species were dominant in the teeth with apical abscesses.

Autotransplantation: A Reliable Treatment Modality for Severely Malpositioned Teeth.

Maxillary canines are the most commonly impacted teeth, second only to third molars. Various treatment methods may be used to recover impacted maxillary canines. This is a report of a 14-year-old girl with a severely malpositioned impacted right maxillary canine which accompanied severe root resorption of adjacent tooth, treated by autotransplantation with a computer aided rapid prototyping model as a surgical guide. This case report demonstrates that autotransplantation can be a reliable treatment alternative, in cases with a severely malpositioned impacted canine, providing acceptable prognosis.

Diversity and homogeneity of oral microbiota in healthy Korean pre-school children using pyrosequencing.

Objectives The purpose of this study was designed to identify the oral microbiota in healthy Korean pre-school children using pyrosequencing. Materials and methods Dental plaque samples were obtained form 10 caries-free pre-school children. The samples were analysed using pyrosequencing. Results The pyrosequencing analysis revealed that, at the phylum level, Proteobacteria, Firmicutes, Bacteroidetes, Actinobacteria and Fusobacteria showed high abundance. Also, predominant genera were identified as core microbiome, such as Streptococcus, Neisseria, Capnocytophaga, Haemophilus and Veilonella. Conclusions The diversity and homogeneity was shown in the dental plaque microbiota in healthy Korean pre-school children.

Expression of inflammatory cytokines and MMPs on replanted teeth at different extra-alveolar time: an ex vivo and in vivo study.

BACKGROUND: Immediately after the avulsed tooth is replanted, a complex inflammatory response ensues. As part of the periodontium healing process, the extracellular matrix macromolecules are essential to create the cellular environment required during healing and morphogenesis. AIM: This study was designed to evaluate the correlation between different extra-alveolar dry times and inflammatory cytokines and matrix metalloproteinases (MMPs) as part of the periodontal ligament (PDL) gene expression. DESIGN: The first phase of the study aimed testing human PDL cells ex vivo. Extracted teeth were dried for 15 and 30 min. The PDL cells were extracted and analyzed by qRT-PCR. The second phase was performed in vivo, and 36 Sprague Dawley rat first maxillary molars were extracted and replanted after 15, 30, and 60 min extra-alveolar time. We tested the levels of inflammatory cytokines and MMPS in periodontal tissue at 3, 7, and 28 days after tooth replantation. The replanted area was dissected, grounded, and analyzed by RT-PCR. RESULTS: Expressions of IL-1ß, IL-6, TNF-α, and MMP-3 and MMP-9 were significantly higher in the replanted teeth. Extended dry time had a direct correlation with induction of pro-inflammatory cytokine and MMPs in PDL cells. CONCLUSION: Our study showed that pro-inflammatory cytokines were more significantly expressed in the tissues surrounding the replanted teeth. Future research must be undertaken to additionally confirm the release of these cytokines and be focused on the inhibition of these cytokines to reduce inflammation of replanted teeth.

Clinical Assessment of a New Caries Activity Test Using Dental Plaque Acidogenicity in Children under Three Years of Age.

OBJECTIVES: The aim of this study was to assess the validity of a new caries activity test that uses dental plaque acidogenicity in children with deciduous dentition. STUDY DESIGN: Ninety-two children under the age of three years old underwent clinical examination using the dft index and examinations with two caries activity tests. Plaque samples for the new Cariview(®) test and the saliva sample for the conventional Dentocult SM(®) test were collected, incubated, and scored according to each manufacturers' instruction. The data were analysed using ANOVA and Spearman correlation analyses to evaluate the relationships between the test results and the caries experience. RESULTS: The mean dft index of all of the subjects was 4.73, and 17.4% of the subjects were caries-free. The levels of caries risk based on the new Cariview test score significantly increased with the caries experience (p < 0.01). The test results revealed a stronger correlation with caries indices (dft and dt index) than the conventional SM colony counting method (r = 0.43, r = 0.39, p < 0.01). CONCLUSIONS: The new caries activity test to analyse the acidogenic potential of whole microorganisms from dental plaques can be used to evaluate caries risk in children with deciduous teeth.

Characteristics of stem cells from human exfoliated deciduous teeth (SHED) from intact cryopreserved deciduous teeth.

The aim of this study is to compare the characteristics of stem cells derived from human exfoliated deciduous teeth (SHED) from cryopreserved intact deciduous teeth with those of fresh SHED. In total, 20 exfoliated deciduous teeth were randomly divided into a fresh group (f-SHED; n = 11) and cryopreserved group (c-SHED; n = 9; stored for 1-8 months). Following thawing and separation of the pulp, the SHED cells were cultured, and the characteristics as mesenchymal stem cells were investigated using proliferation assays, cell-cycle analysis, colony-forming unit-fibroblast (CFU-F) assays, and flow cytometry analyses. Furthermore, differentiation into adipogenic and osteogenic lineages was investigated in vitro as well as in vivo via transplantation in mice. We found no significant differences between the two groups in the proliferation analyses, in the expression of mesenchymal stem cell markers, or in the adipogenic and osteogenic differentiation in vitro (p < 0.05). Furthermore, the in vivo transplantation results showed no significant differences in the quantity of bone tissue that formed or in histochemistry performance (p < 0.05). In conclusion, cryopreservation of intact exfoliated deciduous teeth appears to be a useful method for preserving SHED.

Milk activates the expression of cytokines via Nrf2/HO-1 pathway in human periodontal ligament cells.

BACKGROUND: Milk is known as a suitable storage medium for avulsed teeth during emergency situations, but its potential toxicity on human periodontal ligament (PDL) cells has not been reported. The purpose of this study was to investigate the milk-induced gene profiles of PDL cells in vitro by microarray analysis after storage in milk. We additionally determined whether milk activates the cytoprotective defense mechanisms via the NF-E2-related factor-2 (Nrf2) and heme oxygenase-1 (HO-1) pathway. MATERIAL AND METHODS: Gene induction in cultured human PDL cells after exposure to milk for 1 and 3 h as compared with non-treated PDL cells was analyzed by microarray analysis and subsequent RT-PCR. Reactive oxygen species (ROS) and Western blot analysis were used to determine whether milk activates the cytoprotective defense mechanisms using the Nrf2 and HO-1 pathway. RESULT: Microarray data analysis identified 868 (1 h per control) and 1782 (3 h per control) differentially expressed genes related to the duration of storage in milk. Exposure to milk for 3 and 1 h resulted in the upregulation of specific inflammatory cytokines, chemokines, and MMPs concomitant with downregulation of extracellular matrix-related genes. Exposure to milk increased the expression of peroxiredoxin-1, thioredoxin-1 and heme oxygenase (HO)-1 and stimulated the nuclear translocation of Nrf2. HO-1 inhibitor and Nrf2 siRNA blocked the milk-induced inflammatory response such as production of ROS, expression of cytokines, chemokines, and MMPs. CONCLUSION: Within the limit of this study, this study demonstrates that exposure of PDL cells to milk is associated with an upregulated expression of several pro-inflammatory proteins and key antioxidant proteins via the activation of Nrf2/ARE pathway in PDL cells.

Comparison of three-dimensional printed resin crowns and preformed stainless steel crowns for primary molar restorations: a randomized controlled trial.

The importance of aesthetics in children has increased over time. Therefore, this multicenter randomized clinical trial aimed to analyze and compare three-dimensional (3D)-printed resin crowns (RCs) as a potential alternative to stainless-steel crowns (SSCs) for restoring primary molars with extensive carious lesions. According to the null hypothesis, no statistically significant difference was observed in restoration failure between RC and SSC groups. A total of 56 primary molars after pulp treatment at two dental hospitals were included. After pulp treatment, the teeth were randomly divided into two groups: SSCs (n = 28) and RCs (n = 28). At 1 week and 3, 6 and 12 months, the Quigley-Hein plaque index (QHI), gingival index (GI), occlusal wear, and survival rate were assessed by examination, radiography and alginate impressions. No significant difference in QHI was observed between the two groups. However, the GI at 12 months and occlusal wear in the RC group were significantly higher than those in the SSC group (p < 0.05). The survival rates were 100% in the SSC group and 82.1% in the RC group (p = 0.047). Cracks and discoloration were also observed in the RCs. Within the limitations of this study, 3D-printed RCs are aesthetically superior to SSCs and clinically easy to repair. However, if clinical effectiveness and safety are improved, RCs could potentially become a viable aesthetic alternative in the future.

Three-dimensional analysis of the alveolar ridge profiles of maxillary central incisors in children for autotransplantation.

BACKGROUND: Sufficient alveolar housing is fundamental to ensure the favorable prognosis of autotransplanted teeth. However, little is known about the alveolar ridge profiles of the anterior maxilla in children. Therefore, this study aimed to investigate the alveolar ridge profiles of the anterior maxilla in growing children. METHODS: A total of 169 Korean children aged 10-13 years old were included in this retrospective study. Demographic data and cone-beam computed tomography scans of 244 maxillary central incisors were collected. For each tooth, the alveolar ridge thickness was determined at 1-, 3-, and 5-mm levels below the cemento-enamel junction. The alveolar process height and labial concavity were also evaluated. Statistical analyses were performed to evaluate differences according to age and sex. RESULTS: The alveolar ridge thickness did not differ according to age. The alveolar ridge thickness in males was significantly greater than that in females among those aged 10 and 11 years. The average alveolar process height was 17.43 ± 2.22 mm. The alveolar process height hardly changed with age from 10-13 years, whereas the alveolar process height of males was significantly greater compared with that of females among those aged 10 years. The labial concavity was approximately 150˚, with no significant differences between age and sex. CONCLUSIONS: Within the limits of this study, the anatomy of the alveolar ridge in the maxillary central incisors showed sufficient capacity as a recipient site for autotransplantation using mandibular premolars, especially in males. These findings serve as a valuable resource for facilitating autotransplantation in children.

Effects of Doxycycline-Loaded NO-Releasing Nanomatrix Gel on Delayed Replanted of Rat Molar.

BACKGROUND/AIM: Tooth avulsion and delayed replantation may cause inflammatory responses and root resorption of the tooth. The aim of this study is to investigate the effect of a doxycycline-loaded nitric oxide-releasing nanomatrix (DN) gel on the delayed replantation of avulsed rat teeth, with a focus on assessing the gel's potential to promote regeneration and inhibit complications associated with the replantation process. MATERIALS AND METHODS: Twenty-four right maxillary first molars from male Sprague-Dawley rats were atraumatically extracted using sterile extraction forceps. The molars were dried for 1 h at room temperature (approximately 23 °C) and divided into four groups according to the root conditioning methods after extra-alveolar 60-min drying: Group 1, no root conditioning treatment prior to replantation; Group 2, soaking in 2% NaF solution for 5 min before replantation; Group 3, 5-min soaking in NO gel and injection of the gel into the alveolar socket; Group 4, 5-min soaking in DN gel and injection of the gel into the alveolar socket before replantation. The animals were euthanized four weeks after the operation and the specimens were evaluated histologically. RESULTS: The use of NO gel alone showed better anti-inflammatory and periodontal effects than the control group, but it did not show a significant effect compared to the group using NaF. When using NO gel loaded with doxycycline, it showed a significant anti-inflammatory effect compared to the control group and showed a similar inhibitory effect to the group using NaF. CONCLUSIONS: Within the limits of this study, in delayed replantation situations, the control of inflammatory resorption and replacement resorption is an important factor for achieving a better prognosis of replanted teeth. Root surface treatment with DN gel decreased root resorption after delayed replantation.