Facile Electrodeposition Method for Constructing Li2S as Artificial Solid Electrolyte Interphase for High-Performance Li Metal Anode.

Designing current collectors and constructing efficient artificial solid electrolyte interphase (SEI) layers are promising strategies for achieving dendrite-free Li deposition and practical applications in Li metal batteries (LMBs). Electrodeposition is advantageous for large-scale production and allows the direct formation of current collectors without binders, making them immediately usable as electrodes. In this study, an adherent Cu2S thin-layer on Cu foil is synthesized through anodic electrodeposition from a Na2S solution in a one-step process, followed by the generation of Li2S layers as artificial SEI layers via a conversion reaction (3DLi2S-Cu foil). The Li2S layers move from the 3D Cu surface to the deposited Li surface, facilitating uniform and dense Li deposition. The 3DLi2S-Cu foil structure demonstrates stable cycling performance over 350 cycles in an asymmetric cell, with a capacity of 1 mAh cm-2 at 1 mA cm-2. Moreover, symmetric cells with 5 mAh cm-2 of deposited Li exhibit a stable cycle life for over 1200 h. When paired with commercial LiFePO4 (LFP), the full cells show substantially enhanced cyclability, regardless of the amount of deposited Li. This study provides new insights into the construction of artificial SEIs for facilitating commercial applications.

Attenuation of Las/Rhl quorum sensing regulated virulence and biofilm formation in Pseudomonas aeruginosa PAO1 by Artocarpesin.

The emergence of multidrug resistance and increased pathogenicity in microorganisms is conferred by the presence of highly synchronized cell density dependent signalling pathway known as quorum sensing (QS). The QS hierarchy is accountable for the secretion of virulence phenotypes, biofilm formation and drug resistance. Hence, targeting the QS phenomenon could be a promising strategy to counteract the bacterial virulence and drug resistance. In the present study, artocarpesin (ACN), a 6-prenylated flavone was investigated for its capability to quench the synthesis of QS regulated virulence factors. From the results, ACN showed significant inhibition of secreted virulence phenotypes such as pyocyanin (80%), rhamnolipid (79%), protease (69%), elastase (84%), alginate (88%) and biofilm formation (88%) in opportunistic pathogen, Pseudomonas aeruginosa PAO1. Further, microscopic observation of biofilm confirmed a significant reduction in biofilm matrix when P. aeruginosa PAO1 was supplemented with ACN at its sub-MIC concentration. Quantitative gene expression studies showed the promising aspects of ACN in down regulation of several QS regulatory genes associated with production of virulence phenotypes. Upon treatment with sub-MIC of ACN, the bacterial colonization in the gut of Caenorhabditis elegans was potentially reduced and the survival rate was greatly improved. The promising QS inhibition activities were further validated through in silico studies, which put an insight into the mechanism of QS inhibition. Thus, ACN could be considered as possible drug candidate targeting chronic microbial infections.

Pyrazolines inhibiting the activity of the early growth response-1 DNA-binding domain.

To identify compounds inhibiting the activity of the Early Growth Response (EGR)-1 DNA-binding domain, thirty-seven pyrazolines were prepared and their EGR-1 DNA-binding activities were measured. Pharmacophores were derived based on quantitative structure-activity relationship calculations. As compound 2, 1-(5-(4-methoxyphenyl)-4,5-dihydro-1H-pyrazol-3-yl)naphthalen-2-ol, showed the best inhibitory effects against the activity of the EGR-1 DNA-binding domain, the binding mode between compound 2 and EGR-1 was elucidated using in silico docking. The pharmacophores were matched to the binding modes. Electrophoretic mobility shift assays confirmed that compound 2 dose-dependently inhibited TNFα-induced EGR-1-DNA complex formation in HaCaT cells. Reverse transcription-polymerase chain reaction demonstrated that compound 2 effectively reduced the mRNA expression of EGR-1-regulated inflammatory genes, including thymic stromal lymphopoietin (TSLP), interleukin (IL)-1ß, IL-6, and IL-31, in TNFα-stimulated HaCaT cells. Therefore, compound 2 could be developed as an agent that inhibits the activity of the EGR-1 DNA-binding domain.

Denovo production of resveratrol by engineered Saccharomyces cerevisiae W303-1a using pretreated Gracilaria corticata extracts.

OBJECTIVE: Assembly and construction of resveratrol production pathway in Saccharomyces cerevisiae for denovo production of resveratrol using seaweed extract as fermentation medium. RESULTS: Genes involved in the production of resveratrol from tyrosine pathway, tyrosine ammonia lyase (FTAL) gene from Flavobacterium johnsoniae (FjTAL), the 4-coumarate:CoA ligase gene from Arabidopsis thaliana (4CL1) and the stilbene synthase gene from Vitis vinifera (VvSTS) were introduced into low copy, high copy and integrative vector and transformed into S. cerevisiae W303-1a. The resulting strains W303-1a/pARS-res5, W303-1a/2µ-res1 and W303-1a/IntUra-res9 produced a level of 2.39 ± 0.01, 3.33 ± 0.03 and 8.34 ± 0.03 mg resveratrol l-1 respectively. CRISPR mediated integration at the δ locus resulted in 17.13 ± 1.1 mg resveratrol l-1. Gracilaria corticata extract was tested as a substrate for the growth of transformant to produce resveratrol. The strain produced a comparable level, 13.6 ± 0.54 mg resveratrol l-1 when grown in seaweed extract medium. CONCLUSIONS: The strain W303-1a/IntδC-res1 utilized Gracillaria hydrolysate and produced 13.6 ± 0.54 mg resveratrol l-1 and further investigations are being carried out focusing on pathway engineering and optimization of process parameters to enhance resveratrol yield.

Acetogenic bacteria utilize light-driven electrons as an energy source for autotrophic growth.

Acetogenic bacteria use cellular redox energy to convert CO2 to acetate using the Wood-Ljungdahl (WL) pathway. Such redox energy can be derived from electrons generated from H2 as well as from inorganic materials, such as photoresponsive semiconductors. We have developed a nanoparticle-microbe hybrid system in which chemically synthesized cadmium sulfide nanoparticles (CdS-NPs) are displayed on the cell surface of the industrial acetogen Clostridium autoethanogenum The hybrid system converts CO2 into acetate without the need for additional energy sources, such as H2, and uses only light-induced electrons from CdS-NPs. To elucidate the underlying mechanism by which C. autoethanogenum uses electrons generated from external energy sources to reduce CO2, we performed transcriptional analysis. Our results indicate that genes encoding the metal ion or flavin-binding proteins were highly up-regulated under CdS-driven autotrophic conditions along with the activation of genes associated with the WL pathway and energy conservation system. Furthermore, the addition of these cofactors increased the CO2 fixation rate under light-exposure conditions. Our results demonstrate the potential to improve the efficiency of artificial photosynthesis systems based on acetogenic bacteria integrated with photoresponsive nanoparticles.

Sequential Co-Immobilization of Enzymes on Magnetic Nanoparticles for Efficient l-Xylulose Production.

Multi-enzymatic strategies have shown improvement in bioconversion during cofactor regeneration. In this study, purified l-arabinitol 4-dehydrogenase (LAD) and nicotinamide adenine dinucleotide oxidase (Nox) were immobilized via individual, mixed, and sequential co-immobilization approaches on magnetic nanoparticles, and were evaluated to enhance the conversion of l-arabinitol to l-xylulose. Initially, the immobilization of LAD or Nox on the nanoparticles resulted in a maximum immobilization yield and relative activity of 91.4% and 98.8%, respectively. The immobilized enzymes showed better pH and temperature profiles than the corresponding free enzymes. Furthermore, co-immobilization of these enzymes via mixed and sequential methods resulted in high loadings of 114 and 122 mg/g of support, respectively. Sequential co-immobilization of these enzymes proved more beneficial for higher conversion than mixed co-immobilization because of better retaining Nox residual activity. Sequentially co-immobilized enzymes showed a high relative conversion yield with broader pH, temperature, and storage stability profiles than the controls, along with high reusability. To the best of our knowledge, this is the first report on the mixed or sequential co-immobilization of LAD and Nox on magnetic nanoparticles for l-xylulose production. This finding suggests that selecting a sequential co-immobilization strategy is more beneficial than using individual or mixed co-immobilized enzymes on magnetic nanoparticles for enhancing conversion applications.

Nonsterile Process for Biohydrogen Production: Recent Updates, Challenges, and Opportunities.

Hydrogen (H2), a clean and versatile energy carrier, has recently gained significant attention as a potential solution for reducing carbon emissions and promoting sustainable energy systems. The yield and efficiency of the biological H2 production process primarily depend on sterilization conditions. Various strategies, such as heat inactivation and membrane-based sterilization, have been used to achieve desirable yields via microbial fermentation. Almost every failed biotransformation process is linked to nonsterile conditions at any reaction stage. Therefore, the production of renewable biofuels as alternatives to fossil fuels is more attractive. Pure sugars have been widely documented as a costly feedstock for H2 production under sterile conditions. Biotransformation under nonsterile conditions is more desirable for stable and sustainable operation. Low-cost feeds, such as biowaste, are considered suitable alternatives, but they require appropriate sterilization to overcome the limitations of inherited or contaminating microbes during H2 production. This article describes the status of microbial fermentative processes for H2 production under nonsterile conditions and discusses strategies to improve such processes for sustainable, cleaner production.

Emerging applications of bacteria as antitumor agents.

Bacteria are associated with the human body and colonize the gut, skin, and mucous membranes. These associations can be either symbiotic or pathogenic. In either case, bacteria derive more benefit from their host. The ability of bacteria to enter and survive within the human body can be exploited for human benefit. They can be used as a vehicle for delivering or producing bioactive molecules, such as toxins and lytic enzymes, and eventually for killing tumor cells. Clostridium and Salmonella have been shown to infect and survive within the human body, including in tumors. There is a need to develop genetic circuits, which enable bacterial cells to carry out the following activities: (i) escape the human immune system, (ii) invade tumors, (iii) multiply within the tumorous cells, (iv) produce toxins via quorum sensing at low cell densities, and (v) express suicide genes to undergo cell death or cell lysis after the tumor has been lysed. Thus, bacteria have the potential to be exploited as anticancer agents.

Functional cooperation of the glycine synthase-reductase and Wood-Ljungdahl pathways for autotrophic growth of Clostridium drakei.

Among CO2-fixing metabolic pathways in nature, the linear Wood-Ljungdahl pathway (WLP) in phylogenetically diverse acetate-forming acetogens comprises the most energetically efficient pathway, requires the least number of reactions, and converts CO2 to formate and then into acetyl-CoA. Despite two genes encoding glycine synthase being well-conserved in WLP gene clusters, the functional role of glycine synthase under autotrophic growth conditions has remained uncertain. Here, using the reconstructed genome-scale metabolic model iSL771 based on the completed genome sequence, transcriptomics, 13C isotope-based metabolite-tracing experiments, biochemical assays, and heterologous expression of the pathway in another acetogen, we discovered that the WLP and the glycine synthase pathway are functionally interconnected to fix CO2, subsequently converting CO2 into acetyl-CoA, acetyl-phosphate, and serine. Moreover, the functional cooperation of the pathways enhances CO2 consumption and cellular growth rates via bypassing reducing power required reactions for cellular metabolism during autotrophic growth of acetogens.

Bacterial biofilm inhibitors: An overview.

Bacteria that cause infectious diseases adopt biofilms as one of their most prevalent lifestyles. Biofilms enable bacteria to tolerate environmental stress and evade antibacterial agents. This bacterial defense mechanism has rendered the use of antibiotics ineffective for the treatment of infectious diseases. However, many highly drug-resistant microbes have rapidly emerged owing to such treatments. Different signaling mechanisms regulate bacterial biofilm formation, including cyclic dinucleotide (c-di-GMP), small non-coding RNAs, and quorum sensing (QS). A cell density-dependent phenomenon, QS is associated with c-di-GMP (a global messenger), which regulates gene expression related to adhesion, extracellular matrix production, the transition from the planktonic to biofilm stage, stability, pathogenicity, virulence, and acquisition of nutrients. The article aims to provide information on inhibiting biofilm formation and disintegrating mature/preformed biofilms. This treatment enables antimicrobials to target the free-living/exposed bacterial cells at lower concentrations than those needed to treat bacteria within the biofilm. Therefore, a complementary action of antibiofilm and antimicrobial agents can be a robust strategic approach to dealing with infectious diseases. Taken together, these molecules have broad implications for human health.

Deep-sea sediment metagenome from Bay of Bengal reveals distinct microbial diversity and functional significance.

Bay of Bengal (BoB) has immense significance with respect to ecological diversity and natural resources. Studies on microbial profiling and their functional significance at sediment level of BoB remain poorly represented. Herein, we describe the microbial diversity and metabolic potentials of BOB deep-sea sediment samples by subjecting the metagenomes to Nanopore sequencing. Taxonomic diversity ascertained at various levels revealed that bacteria belonging to phylum Proteobacteria predominantly represented in sediment samples NIOT_S7 and NIOT_S9. A comparative study with 16S datasets from similar ecological sites revealed depth as a crucial factor in determining taxonomic diversity. KEGG annotation indicated that bacterial communities possess sequence reads corresponding to carbon dioxide fixation, sulfur, nitrogen metabolism, but at varying levels. Additionally, gene sequences related to bioremediation of dyes, plastics, hydrocarbon, antibiotic resistance, secondary metabolite synthesis and metal resistance from both the samples as studied indicate BoB to represent a highly diverse environmental niche for further exploration.

Plastic Eating Enzymes: A Step Towards Sustainability.

The large-scale usage of petro-chemical-based plastics has proved to be a significant source of environmental pollution due to their non-biodegradable nature. Microbes-based enzymes such as esterases, cutinases, and lipases have shown the ability to degrade synthetic plastic. However, the degradation of plastics by enzymes is primarily limited by the unavailability of a robust enzymatic system, i.e., low activity and stability towards plastic degradation. Recently, the machine learning strategy involved structure-based and deep neural networks show desirable potential to generate functional, active stable, and tolerant polyethylene terephthalate (PET) degrading enzyme (FAST-PETase). FAST-PETase showed the highest PET hydrolytic activity among known enzymes or their variants and degraded broad ranges of plastics. The development of a closed-loop circular economy-based system of plastic degradation to monomers by FAST-PETase followed by the re-polymerization of monomers into clean plastics can be a more sustainable approach. As an alternative to synthetic plastics, diverse microbes can produce polyhydroxyalkanoates, and their degradation by microbes has been well-established. This article discusses recent updates in the enzymatic degradation of plastics for sustainable development.

Prospecting Microbial Genomes for Biomolecules and Their Applications.

Bioactive molecules of microbial origin are finding increasing biotechnological applications. Their sources range from the terrestrial, marine, and endophytic to the human microbiome. These biomolecules have unique chemical structures and related groups, which enable them to improve the efficiency of the bioprocesses. This review focuses on the applications of biomolecules in bioremediation, agriculture, food, pharmaceutical industries, and human health.

The Emerging Biotherapeutic Agent: Akkermansia.

The human gastrointestinal tract (GIT) is a well-recognized hub of microbial activities. The microbiota harboring the mucus layer of the GIT act as a defense against noxious substances, and pathogens including Clostridium difficile, Enterococcus faecium, Escherichia coli, Salmonella Typhimurium. Toxins, pathogens, and antibiotics perturb the commensal floral composition within the GIT. Imbalanced gut microbiota leads to dysbiosis, manifested as diseases ranging from obesity, diabetes, and cancer to reduced lifespan. Among the bacteria present in the gut microbiome, the most beneficial are those representing Firmicutes and Bacteroidetes. Recent studies have revealed the emergence of a novel biotherapeutic agent, Akkermansia, which is instrumental in regaining eubiosis and conferring various health benefits.

Immobilization of Laccase Through Inorganic-Protein Hybrids Using Various Metal Ions.

In this study, the inorganic-protein hybrid strategy was employed for immobilization of laccase from Rhus vernicifera (Rvlac) using various metals calcium, cobalt, copper, and zinc (Zn). The efficient synthesis of hybrids for Rvlac immobilization was noted at 4 °C for incubation of 24 h. Among these hybrids, the maximum encapsulation yields (EY) of 90.1% and relative activity (RA) of 225% to free enzyme were recorded for Zn and Rvlac based inorganic-protein hybrids as Zn3(PO4)2-Rvlac. The upper optimum pH, and temperature values were observed of 4.0, and 45 °C after immobilization as compared to 3.5, and 40 °C for the free enzyme, respectively. After encapsulation, Rvlac showed a significant improvement up to 11.4-fold in pH and 5.7-fold in temperature the activity profiles. Free enzyme completely lost its activity at 60 °C after 2 h of incubation, whereas Zn3(PO4)2-Rvlac retained its residual activity of 56.7% under similar conditions. After ten cycles of reusability, Zn3(PO4)2-Rvlac possessed high residual activity of 90.8%. This study showed that the variation in the metal ions for immobilization of Rvlac as inorganic-protein hybrids significantly altered EY and RA. Also, Zn3(PO4)2-Rvlac proved more efficient as compared to free laccase that can be beneficially employed for biotechnological applications. Supplementary Information: The online version contains supplementary material available at 10.1007/s12088-022-01000-5.

Mild Alkaline Pretreatment of Rice Straw as a Feedstock in Microbial Fuel Cells for Generation of Bioelectricity.

The dependency on non-renewable fossil fuels as an energy source has drastically increased global temperatures. Their continuous use poses a great threat to the existing energy reserves. Therefore, the energy sector has taken a turn toward developing eco-friendly, sustainable energy generation by using sustainable lignocellulosic wastes, such as rice straw (RS). For lignocellulosic waste to be utilized as an efficient energy source, it needs to be broken down into less complex forms by pretreatment processes, such as alkaline pretreatment using NaOH. Varied NaOH concentrations (0.5%,1.0%,1.5%,2%) for alkaline pretreatment of RS were used for the holocellulose generation. Amongst the four NaOH concentrations tested, RS-1.5% exhibited higher holocellulose generation of 80.1%, whereas 0.5%, 1 5 and 2% pointed 71.9%, 73.8%, and 78.5% holocellulose generation, respectively. Further, microbial fuel cells (MFCs) were tested for voltage generation by utilizing holocellulose generated from untreated (RS-0%) and mildly alkaline pretreated RS (RS-1.5%) as a feedstock. The MFC voltage and maximum power generation using RS-0% were 194 mV and 167 mW/m2, respectively. With RS-1.5%, the voltage and maximum power generation were 556 mV and 583 mW/m2, respectively. The power density of RS-1.5% was three-fold higher than that of RS-0%. The increase in MFC power generation suggests that alkaline pretreatment plays a crucial role in enhancing the overall performance.

Biomolecules Production from Greenhouse Gases by Methanotrophs.

Harmful effects on living organisms and the environment are on the rise due to a significant increase in greenhouse gas (GHG) emissions through human activities. Therefore, various research initiatives have been carried out in several directions in relation to the utilization of GHGs via physicochemical or biological routes. An environmentally friendly approach to reduce the burden of significant emissions and their harmful effects is the bioconversion of GHGs, including methane (CH4) and carbon dioxide (CO2), into value-added products. Methanotrophs have enormous potential for the efficient biotransformation of CH4 to various bioactive molecules, including biofuels, polyhydroxyalkanoates, and fatty acids. This review highlights the recent developments in methanotroph-based systems for methanol production from GHGs and proposes future perspectives to improve process sustainability via biorefinery approaches.

Correction to: Biomethanol Production from Methane by Immobilized Co-cultures of Methanotrophs.

[This corrects the article DOI: 10.1007/s12088-020-00883-6.].

Rhus vernicifera Laccase Immobilization on Magnetic Nanoparticles to Improve Stability and Its Potential Application in Bisphenol A Degradation.

In the present study, Rhus vernicifera laccase (RvLac) was immobilized through covalent methods on the magnetic nanoparticles. Fe2O3 and Fe3O4 nanoparticles activated by 3-aminopropyltriethoxysilane followed with glutaraldehyde showed maximum immobilization yields and relative activity up to 81.4 and 84.3% at optimum incubation and pH of 18 h and 5.8, respectively. The maximum RvLac loading of 156 mg/g of support was recorded on Fe2O3 nanoparticles. A higher optimum pH and temperature of 4.0 and 45 °C were noted for immobilized enzyme compared to values of 3.5 and 40 °C for free form, respectively. Immobilized RvLac exhibited better relative activity profiles at various pH and temperature ranges. The immobilized enzyme showed up to 16-fold improvement in the thermal stability, when incubated at 60 °C, and retained up to 82.9% of residual activity after ten cycles of reuses. Immobilized RvLac exhibited up to 1.9-fold higher bisphenol A degradation efficiency potential over free enzyme. Previous reports have demonstrated the immobilization of RvLac on non-magnetic supports. This study has demonstrated that immobilization of RvLac on magnetic nanoparticles is very efficient especially for achieving high loading, better pH and temperature profiles, and thermal- and solvents-stability, high reusability, and higher degradation of bisphenol A.

Biotin and Zn2+ Increase Xylitol Production by Candida tropicalis.

In this study, the medium requirements to increase the production of xylitol by using Candida tropicalis (CT) have been investigated. The technique of single addition or omission of medium components was applied to determine the nutritional requirements. The addition of amino acids such as Asp, Glu, Gln, Asn, Thr, and Gly had no significant effect on CT growth. However, in the absence of other metal ions, there was a higher concentration of cell growth and xylitol production when only Zn2+ was present in the medium. The analysis of various vitamins unveiled that biotin and thiamine were the only vitamins required for the growth of CT. Surprisingly, when only biotin was present in the medium as a vitamin, there was less growth of CT than when the medium was complete, but the amount of xylitol released was significantly higher. Overall, this study will increase the xylitol production using the single omission or addtion technique.