Near-Unity Green Luminescent Hybrid Manganese Halides as X-ray Scintillators.

The increasing demands in optoelectronic applications have driven the advancement of organic-inorganic hybrid metal halides (OIMHs), owing to their exceptional optical and scintillation properties. Among them, zero-dimensional (0D) low-toxic manganese-based scintillators have garnered significant interest due to their exceptional optical transparency and elevated photoluminescence quantum yields (PLQYs), making them promising for colorful light-emitting diodes and X-ray imaging applications. In this study, two OIMH single crystals of (Br-PrTPP)2MnBr4 (Br-PrTPP = (3-bromopropyl) triphenylphosphonium) and (Br-BuTPP)2MnBr4 (Br-BuTPP = (4-bromobutyl) triphenylphosphonium) were prepared via a facile saturated crystallization method. Benefiting from the tetrahedrally coordinated [MnBr4]2- polyhedron, both of them exhibited strong green emissions peaked at 517 nm owing to the d-d electron transition of Mn2+ with near-unity PLQYs of 99.33 and 86.85%, respectively. Moreover, benefiting from the high optical transparencies and remarkable luminescence properties, these manganese halides also exhibit excellent radioluminescent performance with the highest light yield of up to 68,000 photons MeV-1, negligible afterglow (0.4 ms), and linear response to X-ray dose rate with the lowest detection limit of 45 nGyair s-1. In X-ray imaging, the flexible film made by the composite of (Br-PrTPP)2MnBr4 and PDMS shows an ultrahigh spatial resolution of 12.78 lp mm-1, which provides a potential visualization tool for X-ray radiography.

Crystal-Rigidifying Strategy in Hybrid Manganese Halide to Achieve Narrow Green Emission and High Structural Stability.

Although organic-inorganic hybrid Mn2+ halides have advanced significantly, achieving high stability and narrow-band emission remains enormously challenging owing to the weak ionic nature and soft crystal lattice of the halide structure. To address these issues, we proposed a cationic engineering strategy of long-range cation π···π stacking and C-H···π interactions to simultaneously improve the crystal structural stability and rigidity. Herein, two organic zero-dimensional (0D) manganese halide hybrids of (BACQ)2MnX4 [BACQ = 4-(butylamino)-7-chloroquinolin-1-ium; X = Cl and Br] were synthesized. (BACQ)2MnX4 display strong green-light emissions with the narrowest full width at half-maximum (fwhm) of 39 nm, which is significantly smaller than those of commercial green phosphor ß-SiAlON:Eu2+ and most of reported manganese halides. Detailed Hirshfeld surface analyses demonstrate the rigid environment around the [MnX4]2- units originating from the interactions between [BACQ]+. The rigid crystal structure weakens the electron-phonon coupling and renders narrow fwhm of these manganese halides, which is further confirmed by temperature-dependent emission spectra. Remarkably, (BACQ)2MnX4 realizes outstanding structural and luminescence stabilities in various extreme environments. Benefiting from the excellent performance, these Mn2+ halides are used to assemble light-emitting diodes with a wide color gamut of 105% of the National Television System Committee 1931 standard, showcasing the advanced applications in liquid-crystal-display backlighting.

One-Dimensional Red Light-Emissive Organic Manganese(II) Halides as X-Ray Scintillators.

Although metal halide-based X-ray scintillators have obtained significant development with adjustable radioluminescent spectral range, the red light-emitting scintillator has been sparsely reported and remains a great challenge until now. To remedy this research blank, we investigated the scintillating property of red light-emissive one-dimensional (1D) organic manganese halide of (MBIZ)(MnCl3H2O)·H2O (MBIZ = 2-methyl-1H-benzoimidazolium) with a high PLQY of 71% under UV light excitation. Remarkably, this manganese halide single crystal exhibits a compelling X-ray scintillating property in the red light spectral range with a light yield of 19 600 photons MeV-1 and detection limit of 0.204 µGy/s, which is significantly better than the standard dosage for X-ray diagnostics. Furthermore, this manganese halide also exhibits excellent radiation resistance ability toward long-term continuous irradiation of high-dose X-ray with stable radiophotoluminescence intensity. Benefiting from the abovementioned combined merits, (MBIZ)(MnCl3H2O)·H2O demonstrates high-performance X-ray imaging with an outstanding spatial resolution of 11.1 lpmm-1. As far as we know, this is an infrequent red-emissive X-ray scintillator in metal halide materials, which highlights a successful structural design concept to explore new manganese halides as more desirable scintillators and expand the application field in medical diagnosis.

Synchronously Improved Multiple Afterglow and Phosphorescence Efficiencies in 0D Hybrid Zinc Halides With Ultrahigh Anti-Water Stabilities.

Zero-dimensional (0D) hybrid metal halides have been emerged as room-temperature phosphorescence (RTP) materials, but synchronous optimization of multiple phosphorescence performance in one structural platform remains less resolved, and stable RTP activity in aqueous medium is also unrealized due to serious instability toward water and oxygen. Herein, we demonstrated a photophysical tuning strategy in a new 0D hybrid zinc halide family of (BTPP)2ZnX4 (BTPP=benzyltriphenylphosphonium, X=Cl and Br). Infrequently, the delicate combination of organic and inorganic species enables this family to display multiple ultralong green afterglow and efficient self-trapped exciton (STE) associated cyan phosphorescence. Compared with inert luminescence of [BTPP]+ cation, incorporation of anionic [ZnX4]2- effectively enhance the spin-orbit coupling effect, which significantly boosts the photoluminescence quantum yield (PLQY) up to 30.66 % and 54.62 % for afterglow and phosphorescence, respectively. Synchronously, the corresponding luminescence lifetime extend to 143.94 ms and 0.308 µs surpassing the indiscernible phosphorescence of [BTPP]X salt. More importantly, this halide family presents robust RTP emission with nearly unattenuated PLQY in water and harsh condition (acid and basic aqueous solution) over half a year. The highly efficient integrated afterglow and STE phosphorescence as well as ultrahigh aqueous state RTP realize multiple anti-counterfeiting applications in wide chemical environments.

High Emission Efficiency and Thermal Stability in Zero-Dimensional Hybrid Zinc Halide as a Blue Light Emitter.

Exploring highly efficient blue-emissive lead-free halide materials is a significant and challenging objective in the study of luminescent materials. This study reports the synthesis of a new zero-dimensional (0D) hybrid zinc halide of [CYP]ZnBr4 (CYP = 1-cyclohexylpiperazine) containing an isolated [ZnBr4]2- tetrahedron. [CYP]ZnBr4 exhibits strong blue light emission with a high photoluminescence quantum yield (PLQY) of 79.22%, surpassing all previously reported 0D zinc halide counterparts. According to the theoretical and experimental studies, the blue light emission is attributed to intrinsic self-trapped excitons resulting from strong electron-phonon coupling and structural deformation. Importantly, [CYP]ZnBr4 demonstrates excellent structural and luminescence stability toward high temperatures (180 °C) over at least half a month. High luminescence efficiency and stability enable [CYP]ZnBr4 to be an efficient blue phosphor to fabricate white light-emitting diodes (LEDs), which produces high-quality white light with a color rendering index (CRI) of 93.1 and a correlated color temperature (CCT) of 5304 K, closely resembling natural sunlight. This white LED also exhibits consistent performance and stability across different drive currents, suggesting the potential for high-power optoelectronic applications. Overall, this study paves the way for the utilization of 0D hybrid halides in advanced solid-state lighting applications.

Bulk Mn2+ Doped 1D Hybrid Lead Halide Perovskite with Highly Efficient, Tunable and Stable Broadband Light Emissions.

Mn2+ doped colloidal three-dimensional (3D) lead halide perovskite nanocrystal (PNC) has attracted intensive research attention; however, the low exciton binding energy and fatal optical instability of 3D PNC seriously hinder the optoelectronic application. Therefore, it remains significant to explore new stable host perovskite with strongly bound exciton to realize more desirable luminescent property. In this work, we utilized bulk one-dimensional (1D) hybrid perovskite of [AEP]PbBr5 ⋅ H2 O (AEP=N-aminoethylpiperazine) as structural platform to rationally optimize the luminescent property by a controllable Mn2+ doping strategy. Significantly, the series of Mn2+ -doped 1D [AEP]PbBr5 ⋅ H2 O show enhanced energy transfer efficiency from the strongly bound excitons of host material to 3d electrons of Mn2+ ions, resulting in tunable broadband light emissions from weak yellow to strong red spectral range with highest photoluminescence quantum yield up to 28.41 %. More importantly, these Mn2+ -doped 1D perovskites display ultrahigh structural and optical stabilities in humid atmosphere, water and high temperature exceeding the conventional 3D PNC. Combined highly efficient, tunable and stable broadband light emissions enable Mn2+ -doped 1D perovskite as excellent down-converting phosphor showcasing the potential application in white light emitting diode. This work not only provides a profound understanding of low-dimensional perovskites but also opens a new way to rationally design high-performance broadband light emitting perovskites for solid-state lighting and displaying devices.

Ultra-Sensitive, Selective and Repeatable Fluorescence Sensor for Methanol Based on a Highly Emissive 0D Hybrid Lead-Free Perovskite.

A convenient and rapid detection method for methanol in ethanol remains a major challenge due to their indistinguishable physical properties. Herein, a novel fluorescence probe based on perovskite was successfully designed to overcome this bottleneck. We report a new zero-dimensional (0D) hybrid perovskite of [MP]2 Inx Sb1-x Cl7 ⋅ 6 H2 O (MP=2-methylpiperazine) displaying an unusual green light emission with near-unity photoluminescence quantum yield. Remarkably, this 0D perovskite exhibits reversible methanol-response luminescence switching between green and yellow color but fail in any other organic vapors. Even for blended alcohol solutions, the luminescent probe exhibits excellent sensing performance with multiple superiorities of rapid response time (30 s) and ultra-low detection limit (40 ppm), etc. Therefore, this 0D perovskite can be utilized as a perfect fluorescence probe to detect traces of methanol from ethanol with ultrahigh sensitivity, selectivity and repeatability. To the best of our knowledge, this work represents the first perovskite as fluorescence probe for methanol with wide potential in environmental monitoring and methanol detection, etc.

Tunable Metal-Organic Frameworks Based on 8-Connected Metal Trimers for High Ethane Uptake.

Metal trimers [M3 (O/OH)](OOCR)6 are among the most important structural building blocks. From these trimers, a great success has been achieved in the design of 6- or 9-connected framework materials with various topological features and outstanding gas-sorption properties. In comparison, 8-connected trimer-based metal-organic frameworks (MOFs) are rare. Given multiple competitive pathways for the formation of 6- or 9-connected frameworks, it remains challenging to identify synthetic or structural parameters that can be used to direct the self-assembly process toward trimer-based 8-connected materials. Here, a viable strategy called angle bending modulation is revealed for creating a prototypical MOF type based on 8-connected M3 (OH)(OOCR)5 (Py-R)3 trimers (M = Zn, Co, Fe). As a proof of concept, six members in this family are synthesized using three types of ligands (CPM-80, -81, and -82). These materials do not possess open-metal sites and show excellent uptake capacity for various hydrocarbon gas molecules and inverse C2 H6 /C2 H4 selectivity. CPM-81-Co, made from 2,5-furandicarboxylate and isonicotinate, features selectivity of 1.80 with high uptake capacity for ethane (123 cm3 g-1 ) and ethylene (113 cm3 g-1 ) at 298 K and 1 bar.

A Zero-Dimensional Hybrid Cadmium Perovskite with Highly Efficient Orange-Red Light Emission.

Low-dimensional organic-inorganic hybrid metal halide materials have been extensively studied due to their excellent optoelectronic performances. Herein, by using the facile wet-chemistry method, we designed one new hybrid cadmium bromide of (H3AEP)2CdBr6·2Br based on discrete octahedral [CdBr6]4- units. Remarkably, the bulk crystal of (H3AEP)2CdBr6·2Br exhibits strong broadband orange-red light emission from the radiative recombination of self-trapped excitons (STEs) with a high photoluminescence quantum yield (PLQY) of 9%. Benefiting from the highly efficient luminescent performance, this 0D cadmium perovskite can be utilized as an excellent down-conversion red phosphor to assemble a white light-emitting diode, and a high color rendering index (CRI) of 93 is realized. As far as we know, this is the first orange-red light-emitting hybrid cadmium perovskite which promotes the full-color display in this system.

Combining Dual-Light Emissions to Achieve Efficient Broadband Yellowish-Green Luminescence in One-Dimensional Hybrid Lead Halides.

In recent years, low-dimensional lead halides have emerged as some of most attractive photoelectric materials due to their intrinsic broadband emissions with a potential application in white-light emitting diodes. To achieve the desired performance, tremendous research has emphasized the modulation of inorganic components as optical centers; however, less work has paid attention to the direct contribution of the organic components. Herein, we successfully assembled two new hybrid lead halides of [H2BPP]Pb2X6 (X = Br, 1, and Cl, 2) containing one-dimensional double [Pb2X6]2- chains using optically active 1,3-bis(4-pyridyl)-propane (BPP) as an organic cation. Under UV-light excitation, compounds 1 and 2 exhibit broadband yellowish-green emissions, which were verified by promising photoluminescence quantum efficiencies (PLQEs) of 8.10% and 4.84%, respectively. The broadband light emissions are derived from the combination of dual higher-energy blue and lower-energy yellow light spectra, which can be attributed to the individual contributions of the organic and inorganic components, respectively, according to the time-resolved and temperature-dependent emission spectra as well as theoretical calculations. This work proves the great contribution of organic components to the photophysical properties and provides a new design strategy to realize broadband light emission by rationally combining the dual-emitting properties of different assembly blocks.

Three-Dimensional Cuprous Iodide Framework with Intrinsic Broadband Red-to-Near-Infrared Light Emission.

Herein, a new organic-inorganic hybrid cuprous iodide of [(Me)2-DABCO]Cu6I8 was prepared and structurally characterized with a novel three-dimensional (3D) [Cu6I8]2- framework. Significantly, this 3D cuprous iodide displays infrequent broadband red-to-near-infrared light emission (600-1000 nm) stemming from the radiative recombination of self-trapped excitons.

Improving Broadband White-Light Emission Performances of 2D Perovskites by Subtly Regulating Organic Cations.

Recently, 2D organic-inorganic hybrid lead halide perovskites have attracted intensive attention in solid-state luminescence fields such as single-component white-light emitters, and rational optimization of the photoluminescence (PL) performance through accurate structural-design strategies is still significant. Herein, by carefully choosing homologous aliphatic amines as templates, isotypical perovskites [DMEDA]PbCl4 (1, DMEDA=N,N-dimethylethylenediamine) and [DMPDA]PbCl4 (2, DMPDA=N,N-dimethyl-1,3-diaminopropane) having tunable and stable broadband bluish white emission properties were rationally designed. The subtle regulation of organic cations leads to a higher degree of distortion of the 2D [PbCl4 ]2- layers and enhanced photoluminescence quantum efficiencies (<1 % for 1 and 4.9 % for 2). The broadband light emissions could be ascribed to self-trapped excitons on the basis of structural characterization, time-resolved PL, temperature-dependent PL emission, and theoretical calculations. This work gives a new guidance to rationally optimize the PL properties of low-dimensional halide perovskites and affords a platform to probe the structure-property relationship.

One-Dimensional Face-Shared Perovskites with Broad-Band Bluish White-Light Emissions.

In recent years, two-dimensional (2D) hybrid lead halide perovskites based on corner-shared [PbX6] octahedrons have received extensive attention with important potentials in single-component white-light emitting diodes (WLEDs) due to the soft and distorted crystal lattices. However, limited research focused on the one-dimensional (1D) perovskites although they possess similar structural superiorities to achieve this performance. Herein, by using different types of organic amine cations as structural direction reagents, we report one new type of hybrid 1D perovskites of APbCl3 (A = (DTHPE)0.5, DMTHP, DBN) based on the same 1D face-shared octahedral [PbCl3]- chains. Upon UV light excitation, these 1D APbCl3 perovskites exhibit intrinsic broad-band bluish white-light emissions covering entire visible light spectra with the highest photoluminescence quantum yield (PLQY) of 6.99%, which catches up with the values of previously reported 2D perovskites. Through the systematical studies of time-resolved, temperature-dependent PL emissions, theoretical calculations, and so on, these broad-band light emissions can be ascribed to the radiative transition within conjugated organic cations. The facile assembly process, intrinsic broad-band light emissions, and high PLQYs enable these 1D APbCl3 perovskites as new types of promising candidates in fabricating single-component WLEDs.

Broadband White-Light Emission in One-Dimensional Organic-Inorganic Hybrid Silver Halide.

In the past few decades, organic-inorganic hybrid metal halides acting as single-component white light emission diodes (LEDs) have attracted extensive attentions, but most of the studies concentrate on the low-dimensional lead perovskites. Here, by using the nontoxic silver as optically active metal center, a series of hybrid silver halides based on one-dimensional structures were constructed and realized broadband white light emission. Compounds [H2DABCO][Ag2X4(DABCO)] (X = Br (1), I (2)) feature one-dimensional [Ag2X4(DABCO)]2- structures charged balanced by [H2DABCO]2+ cations. Compound 1 exhibits an efficient broadband white-light emission with photoluminescence quantum efficiency (PLQE) of about 2.1% and excellent photochemical stability, while compound 2 gives a broadband yellow-white emission centered at 556 nm. [HDABCO]3Ag5Cl8 (3) gives a strong broadband yellow emission (585 nm) with high PLQE of 6.7%, which can be easily fabricated as a white light emitting device. Based on the temperature-dependent, particle-size-dependent, and time-resolved PL measurements as well as other detailed studies, the broadband white-light emissions are ascribed to the synergetic effects of the organic and inorganic components. Our work provides a unique structural assembly method to explore lead-free single-component white-light illuminants from molecular level.

Three-Dimensional Cuprous Lead Bromide Framework with Highly Efficient and Stable Blue Photoluminescence Emission.

Considering the instability and low photoluminescence quantum yield (PLQY) of blue-emitting perovskites, it is still challenging and attractive to construct single crystalline hybrid lead halides with highly stable and efficient blue light emission. Herein, by rationally introducing d10 transition metal into single lead halide as new structural building unit and optical emitting center, we prepared a bimetallic halide of [(NH4 )2 ]CuPbBr5 with new type of three-dimensional (3D) anionic framework. [(NH4 )2 ]CuPbBr5 exhibits strong band-edge blue emission (441 nm) with a high PLQY of 32 % upon excitation with UV light. Detailed photophysical studies indicate [(NH4 )2 ]CuPbBr5 also displays broadband red light emissions derived from self-trapped states. Furthermore, the 3D framework features high structural and optical stabilities at extreme environments during at least three years. To our best knowledge, this work represents the first 3D non-perovskite bimetallic halide with highly efficient and stable blue light emission.

Organic-Inorganic Hybrid Heterometallic Halides with Low-Dimensional Structures and Red Photoluminescence Emissions.

In recent years, although low-dimensional hybrid lead halides have received great attention due to the fascinating photoluminescent (PL) properties, the research is still on the early stage and only limited phases have been explored and characterized. Here, by introducing heterometals as mixed structural compositions and optical activity centers, we prepared a series of low-dimensional hybrid heterometallic halides, namely as, [(Me)-DABCO]2Cu2PbI6, [(Me)2-DABCO]2M5Pb2I13 (M = Cu and Ag) and [(Me)2-DABCO]Ag2PbBr6 (Me = methyl group, DABCO = 1,4-diazabicyclo[2.2.2]octane). These hybrid halides feature a low-dimensional 0D [Cu2PbI6]2- cluster, a 1D [M5Pb2I13]4- chain, and a 2D [Ag2PbBr6]2- layer, respectively, on the basis of corner-, edge- and face-sharing connecting of [MX4] tetrahedrons, [PbX5] quadrangular pyramids, and [PbX6] octahedrons. Under the photoexcitation, these hybrid heterometallic halides exhibit deep-red luminescent emissions from 711 to 801 nm with the largest Stocks shift of 395 nm. The temperature-dependent PL emissions, PL lifetime, and theoretical calculations are also investigated to probe into the intrinsic nature of photoluminescent emissions. This work affords new types of hybrid halides by introducing different metal centers to probe into the structural evolution and photoluminescent properties.

Novel 3D Semiconducting Open-Frameworks based on Cuprous Bromides with Visible Light Driven Photocatalytic Properties.

Visible light driven photocatalysts based on crystalline microporous metal halogenides received much less attention compared with dense or composite oxide semiconductors. Using the well-known photosensitive transition metal-complexes [TM(2,2-bipy)3 ]2+ (TM=Fe, Co, Ni, Ru) as templates, a special three-dimensional (3D) metal halogenide framework of [TM(2,2-bipy)3 ]Cu4 Br6 was designed with [Cu4 Br4 ] cluster as 4-connected node. These microporous materials feature narrow band gaps and stable visible light driven photocatalytic properties including water reduction to provide H2 and photodegradation of organic pollutants. The study of electronic band structure shows that the TM complexes effectively prevent the recombination of photo-induced electron/hole pairs leading to excellent photocatalytic activity and photochemical stability. This work represents the first 3D microporous metal halogenides used as visible light driven photocatalyst to provide hydrogen energy.

Novel Three-Dimensional Semiconducting Materials Based on Hybrid d10 Transition Metal Halogenides as Visible Light-Driven Photocatalysts.

The development of new visible light-driven photocatalysts based on semiconducting materials remains a greatly interesting and challenging task for the purpose of solving the energy crisis and environmental issues. By using photosensitive [(Me)2-2,2'-bipy]2+ (1,1'-dimethyl-2,2'-bipyridinium) cation as template, we synthesized one new type of inorganic-organic hybrid cuprous and silver halogenides of [(Me)2-2,2'-bipy]M8X10 (M = Cu, Ag, X = Br, I). The compounds feature a three-dimensional anionic [M8X10]2- network composed of a one-dimensional [M8X12] chain based on MX4 tetrahedral units. The photosensitization of organic cationic templates results in narrow band gaps of hybrid compounds (1.66-2.06 eV), which feature stable visible light-driven photodegradation activities for organic pollutants. A detailed study of the photocatalytic mechanism, including the photoelectric response, photoluminescence spectra, and theoretical calculations, shows that the organic cationic template effectively inhibits the recombination of photoinduced electron-hole pairs leading to excellent photocatalytic activities and photochemical stabilities.

Transition-Metal-Complex Cationic Dyes Photosensitive to Two Types of 2D Layered Silver Bromides with Visible-Light-Driven Photocatalytic Properties.

With mixed transition-metal (TM) complex, alkali-metal cations, or halogen anions as structure-directing agents, two types of two-dimensional (2D) layered inorganic-organic hybrid silver bromides were prepared and structurally characterized as K[TM(2,2-bipy)3]2Ag6Br11 (TM = Ni (1), Co (2), Zn (3), Fe (4)) and [TM(2,2-bipy)3]2Ag13Br17 (TM = Ni (5), Co (6), Zn (7), Fe (8)). Compounds 1-4 feature 2D microporous anionic [Ag6Br11]5- layers composed of [Ag3Br7] secondary building units based on AgBr4 tetrahedral units, and compounds 5-8 contain 2D [Ag13Br16]3- layers built from the one-dimensional complex [Ag8Br12] and [Ag5Br8] chains. The photosensitization of TM complex dyes led to the narrow semiconducting behaviors with tunable band gaps of 1.73-2.71 eV for the title compounds, which result in excellent and stable photocatalytic degradation activities over organic pollutants under visible-light irradiation. The studies of photocatalytic mechanism based on radical-trapping experiments and electronic band structural calculation show that the TM complex cations play important roles in the photocatalytical activities and photochemical stabilities due to their excellent separating abilities for photogenerated carriers. This technique affords one new type of visible-light-driven photocatalyst and facilitates the integration of 2D layered materials and semiconducting photocatalytic properties into one hybrid d10 TM halogenide.

Two Types of 2D Layered Iodoargentates Based on Trimeric [Ag3I7] Secondary Building Units and Hexameric [Ag6I12] Ternary Building Units: Syntheses, Crystal Structures, and Efficient Visible Light Responding Photocatalytic Properties.

With mixed transition-metal-complex, alkali-metal, or organic cations as structure-directing agents, a series of novel two-dimensional (2D) layered inorganic-organic hybrid iodoargentates, namely, Kx[TM(2,2-bipy)3]2Ag6I11 (TM = Mn (1), Fe (2), Co (3), Ni (4), Zn (5); x = 0.89-1) and [(Ni(2,2-bipy)3][H-2,2-bipy]Ag3I6 (6), have been solvothermally synthesized and structurally characterized. All the title compounds feature 2D microporous layers composed by [Ag3I7] secondary building units based on AgI4 tetrahedra. Differently, the [Ag3I7] trimers are directly interconnected via corner-sharing to form the 2D [Ag6I11](5-) layer in compounds 1-5, whereas two neighboring [Ag3I7] trimers are initially condensed into a hexameric [Ag6I12] ternary building unit as a new node, which further self-assembles, leading to the 2D [Ag6I10](4-) layer in compound 6. The UV-vis diffuse-reflectance measurements reveal that all the compounds possess proper semiconductor behaviors with tunable band gaps of 1.66-2.75 eV, which lead to highly efficient photocatalytic degradation activities over organic pollutants under visible light irradiation compared to that of N-dotted P25. Interestingly, all the samples feature distinct photodegradative speeds at the same reaction conditions, and compound 1 features the highest photocatalytic activity among the title phases. The luminescence properties, band structures, and thermal stabilities were also studied.