RESUMO
INTRODUCTION: The main aim was to analyse the series of 29 collected cemented Charnley-Muller Alivium retrievals with the meantime in situ of 27 years. In addition, the revision rate of 1425 Alivium prostheses implanted at our institution between 1977 and 1992 was calculated. MATERIALS AND METHODS: The revision percentage of the Alivium cohort was calculated up to 45 years of follow-up and compared to that of all total hip arthroplasties (THAs) implanted in the same period (No. 5535). Metal and polyethylene retrieved components were inspected in 29 cases for wear damage and roughness. Wear particles were retrieved from periprosthetic tissue using digestion protocols and their composition, morphology, and size distribution were investigated. Periprosthetic tissue was analysed histologically. RESULTS: The revision percentage of the Alivium cohort was 16% at 45 years of follow-up. It was comparable to all the THAs implanted at the same time (18%). The shape of polyethylene particles isolated from periprosthetic tissue corresponded to the wear pattern on polyethylene cups. Polyethylene particles were the main wear product, with the majority (68%) of particles smaller than 0.1 µm. Metal particles were rare with two types: CoCr and Cr based. Histological analysis showed that in 14 out of 18 specimens, the metal particles were graded + 1, reflecting that the metal loading in the periprosthetic tissue was low. CONCLUSIONS: Our study represents valuable data not reported previously on the survival rate of Charnley-Muller prostheses at 45 years of follow-up and a unique insight into the collected retrievals from the materials' point of view.
Assuntos
Artroplastia de Quadril , Prótese de Quadril , Humanos , Artroplastia de Quadril/efeitos adversos , Artroplastia de Quadril/métodos , Prótese de Quadril/efeitos adversos , Corrosão , Falha de Prótese , Polietileno , Metais , Desenho de PróteseRESUMO
Background and Objectives: Increased revision rate of dual-modular (DM) femoral stems in primary total hip arthroplasty (THA) because of modular-neck breakage and adverse local tissue reactions (ALTRs) to additional junction damage products is well established and some designs have been recalled from the market. However, some long-term studies of specific DM stems did not confirm the inferiority of these stems compared to standard single-modular (SM) stems, and a head-to-head comparison THA is missing. The objectives of this multicentre study were to determine the survivorship and complication rates of a common DM stem design compared to a similar SM stem. Materials and Methods: In a time frame from January 2012 to November 2015, a cohort of 807 patients (882 hips) consecutively underwent primary cementless THAs at two orthopaedic centres. 377 hips were treated with a Zweimüller-type DM stem THA system and 505 hips with a similar SM stem THA system, both including a modern press-fit acetabulum. Kaplan-Meier survivorship and complication rates were compared between both groups in a median follow-up of 9.0 years (maximum, 9.9 years). Results: The 9-year survivorship of the DM stem THA system (92.6%, 95% CI 89.9-95.3) was significantly lower than that of the SM stem THA system (97.0%, 95% CI 95.2-98.8). There were no differences in revision rates for septic loosening, dislocation, and periprosthetic fractures between the two groups. One ceramic inlay and one Ti-alloy modular neck breakage occurred in the DM stem THA system group, but the main reason for revision in this group was aseptic loosening of components. Conclusions: The survivorship of the DM stem THA system was lower than the similar SM stem THA system in a comparable clinical environment with long-term follow-up. Our results confirmed that no rationale for stem modularity exists in primary THAs.
Assuntos
Artroplastia de Quadril , Prótese de Quadril , Humanos , Artroplastia de Quadril/efeitos adversos , Prótese de Quadril/efeitos adversos , Falha de Prótese , Desenho de Prótese , Reoperação , Estimativa de Kaplan-Meier , Estudos Retrospectivos , Seguimentos , Resultado do TratamentoRESUMO
BACKGROUND: Femoral stems with bimodular (head-neck as well as neck-body) junctions were designed to help surgeons address patients' hip anatomy individually. However, arthroplasty registers have reported higher revision rates in stems with bimodular junctions than in stems with modularity limited to the head-neck trunnion. However, to our knowledge, no epidemiologic study has identified patient-specific risk factors for modular femoral neck fractures, and some stems using these designs still are produced and marketed. QUESTIONS/PURPOSES: The purposes of this study were (1) to establish the survival rate free from aseptic loosening of one widely used bimodular THA design; (2) to define the proportion of patients who experienced a fracture of the stem's modular femoral neck; and (3) to determine factors associated with neck fracture. METHODS: In this retrospective, nationwide, multicenter study, we reviewed 2767 bimodular Profemur® Z stems from four hospitals in Slovenia with a mean followup of 8 years (range, 3 days to 15 years). Between 2002 and 2015, the four participating hospitals performed 26,132 primary THAs; this implant was used in 2767 of them (11%). The general indications for using this implant were primary osteoarthritis (OA) in 2198 (79%) hips and other indications in 569 (21%) hips. We followed patients from the date of the index operation to the date of death, date of revision, or the end of followup on March 1, 2018. We believe that all revisions would be captured in our sample, except for patients who may have emigrated outside the country, but the proportion of people immigrating to Slovenia is higher than the proportion of those emigrating from it; however, no formal accounting for loss to followup is possible in a study of this design. There were 1438 (52%) stems implanted in female and 1329 (48%) in male patients, respectively. A titanium alloy neck was used in 2489 hips (90%) and a cobalt-chromium neck in 278 (10%) hips. The mean body mass index (BMI) at the time of operation was 29 kg/m (SD ± 5 kg/m). We used Kaplan-Meier analysis to establish survival rates, and we performed a chart review to determine the proportion of patients who experienced femoral neck fractures. A binary logistic regression model that controlled for the potential confounding variables of age, sex, BMI, time since implantation, type of bearing, diagnosis, hospital, neck length, and neck material was used to analyze neck fractures. RESULTS: There were 55 (2%) aseptic stem revisions. Survival rate free from aseptic loosening at 12 years was 97% (95% confidence interval [CI] ± 1%). Fracture of the modular neck occurred in 23 patients (0.83%) with a mean BMI of 29 kg/m (SD ± 4 kg/m.) Twenty patients with neck fractures were males and 19 of 23 fractured necks were long. Time since implantation (odds ratio [OR], 0.55; 95% CI 0.46-0.66; p < 0.001), a long neck (OR, 6.77; 95% CI, 2.1-22.2; p = 0.002), a cobalt-chromium alloy neck (OR, 5.7; 95% CI, 1.6-21.1; p = 0.008), younger age (OR, 0.91; 95% CI, 0.86-0.96; p < 0.001), and male sex (OR, 3.98; 95% CI, 1.04-14.55; p = 0.043) were factors associated with neck fracture. CONCLUSIONS: The loosening and neck fracture rates of the Profemur® Z stem were lower than in some of previously published series. However, the use of modular femoral necks in primary THA increases the risk for neck fracture, particularly in young male patients with cobalt-chromium long femoral necks. The bimodular stem we analyzed fractured unacceptably often, especially in younger male patients. For most patients, the risks of using this device outweigh the benefits, and several dozen patients had revisions and complications they would not have had if a different stem had been used. LEVEL OF EVIDENCE: Level III, therapeutic study.
Assuntos
Artroplastia de Quadril , Fraturas do Colo Femoral/epidemiologia , Prótese de Quadril/efeitos adversos , Próteses Articulares Metal-Metal/efeitos adversos , Falha de Prótese , Ligas de Cromo , Feminino , Seguimentos , Humanos , Estimativa de Kaplan-Meier , Masculino , Pessoa de Meia-Idade , Desenho de Prótese , Reoperação/estatística & dados numéricos , Estudos Retrospectivos , Fatores de Risco , Eslovênia/epidemiologia , TitânioRESUMO
Background and purpose - Despite the increasing number of total hip replacements (THRs), their systemic influence is still not known. We have studied the influence of specific features of THRs-the bearing surface, the use of bone cement and the material of the stem-on the cancer incidence. Patients and methods - In a retrospective cohort study we identified 8,343 patients with THRs performed at Valdoltra Hospital from September 1, 1997 to December 31, 2009. Patient data were linked to national cancer and population registries. The standardized incidence ratios (SIR) and Poisson regression relative risks (RR) were calculated for all and specific cancers. Results - General cancer risk in our cohort was comparable to the population risk. Comparing with population, the risk of prostate cancer was statistically significantly higher in patients with metal-on-metal bearings (SIR =1.35); with metal-on-polyethylene bearings (SIR =1.30), with non-cemented THRs (SIR =1.40), and with titanium alloy THRs (SIR =1.41). In these last 3 groups there was a lower risk of hematopoietic tumors (SIR =0.69; 0.66 and 0.66 respectively). Risk of kidney cancer was significantly higher in the non-metal-on-metal, non-cemented, and titanium alloy groups (SIR =1.30; 1.46 and 1.41 respectively). Risk of colorectal and lung cancer was significantly lower in the investigated cohort (SIR =0.82 and 0.83, respectively). Risk for all cancers combined as well as for prostate and skin cancer, shown by Poisson analysis, was higher in the metal-on-metal group compared with non-metal-on-metal group (RR =1.56; 2.02 and 1.92, respectively). Interpretation - Some associations were found between the THRs' features, especially a positive association between metal-on-metal bearings, and specific cancers.
Assuntos
Artroplastia de Quadril/instrumentação , Prótese de Quadril , Neoplasias/epidemiologia , Desenho de Prótese , Adulto , Idoso , Idoso de 80 Anos ou mais , Cimentação , Feminino , Humanos , Incidência , Masculino , Pessoa de Meia-Idade , Neoplasias/patologia , Estudos Retrospectivos , EslovêniaRESUMO
PURPOSE: The aim of this study is to evaluate the outcome of the cementless SL-Plus stem in worldwide arthroplasty register datasets. METHODS: A structured analysis was conducted the registered data about the SL-Plus stem manufactured by Smith&Nephew including published data from Australia as well as previously unpublished datasets from the Registers of Lombardia, Italy and Valdoltra, Slovenia. A total of 75% of the data analysed had not been published so far. The primary outcome measure was the revision rate, calculated in revisions per 100 observed component years. We evaluated a total of 10,684 primary and 122 revision surgeries with an average follow-up period of four years. RESULTS: All datasets showed good and reproducible results for treatment with the SL-Plus stem. An average of 0.31 revisions per 100 observed component years had been reported, which is considerably below the worldwide average (1.29) found for total hip arthroplasty independent of the product. The results of a large centre did not essentially deviate from the revision rates in Lombardia, where the numbers of cases per department are relatively low on average. CONCLUSIONS: There were no indications for product defects or relevant errors in application. The SL-Plus stem can be considered a high-quality product that ensures good results also in the hands of less experienced surgeons. Data from even young registers can substantially contribute to the assessment of implants, even with the short follow-up periods. These datasets particularly allow for valid assessment of safety issues and can therefore make an essential contribution to the solution of problems of current relevance.
Assuntos
Artroplastia de Quadril , Cimentação , Prótese de Quadril , Avaliação de Resultados em Cuidados de Saúde , Complicações Pós-Operatórias/etiologia , Desenho de Prótese , Artroplastia de Quadril/efeitos adversos , Artroplastia de Quadril/instrumentação , Artroplastia de Quadril/métodos , Bases de Dados Factuais , Saúde Global , Humanos , Avaliação de Resultados em Cuidados de Saúde/estatística & dados numéricos , Complicações Pós-Operatórias/epidemiologia , Falha de Prótese/etiologia , Sistema de Registros , Reoperação , Reprodutibilidade dos TestesRESUMO
Introduction: The purpose of the study was to analyse the impact of the COVID-19 pandemic on the healthcare of the orthopaedic patient, i.e. numbers of hip and knee replacement surgeries, 90-day mortality, waiting times and outpatient clinic visits. Methods: The Hip (HR) and Knee Replacement (KR) records from The National Arthroplasty Registry of Slovenia in the pandemic year 2020 were compared to the year 2019. To compare reasons for revision and 90-day mortality the Chi-square test was used. The median values of the number of operations and waiting times were compared with the 95% confidence intervals. The number of outpatient clinic visits was tested with the Wilcoxon Signed Ranked test. Results: All operations fell by 19%, from 7825 to 6335. The number of Primary Total HR declined from 3530 to 2792 (21%) and the number of Primary KR from 3191 to 2423 (24%). The number of hip revisions declined by 10% and knee revisions by 25%. We did not find differences in 90-day mortality (p=0.408). Outpatient clinic visits fell from 228682 to 196582 (14%) per year. Waiting times increased by 15% for HR and by 12% for KR. Conclusion: There was an inevitable drop in the number of surgeries and outpatient clinic visits in the spring and autumn lockdown. With the reorganisation of the orthopaedic service in Slovenia, the number of KR and HR stayed at a relatively high level despite the pandemic. An epidemiological model and mechanisms for the reduction of waiting times could overcome the impact of the epidemic.
RESUMO
BACKGROUND: Mixing and matching components from different manufacturers in total hip arthroplasty is a frequently used off-label praxis. The clinical consequences of this procedure have not been studied in detail. METHODS: 860 patients with matched and 1067 patients with mixed primary total hip replacement (THR) components carried out between 1 January 2002 and 31 December 2004, were selected from our Institution registry. The analysis endpoint was set at 1 January 2016. THRs with poorly performing components were excluded from study groups. Kaplan-Meier survival curves for both groups were calculated and compared using the Log-Rank test and the demographic data using the chi-square test. Correlations between demographic data and revisions were calculated using bivariate correlation. RESULTS: 28 revisions were carried out in the matched group and 67 in the mixed group. The 14-year overall survival probability was significantly better in the former (96.0%) than in the mixed group (92.7%) (p = 0.002). Survival, free of aseptic and septic failures, was statistically, significantly higher in the matched group (p = 0.026 and p = 0.007, respectively).The survival of the mixed subgroup with heads and stems from the same manufacturer did not differ statistically from that of the matched group (p = 0.079). CONCLUSIONS: In contrast to the results listed in the National Joint Registry and the New Zealand Joint Registry, the survival probability in our study was, statistically, significantly higher in total hip replacements using components of the same manufacturer. Importantly, mixing and matching the components of different manufacturers led to similar survival providing the head and the stem were from the same manufacturer.
Assuntos
Artroplastia de Quadril , Prótese de Quadril , Artroplastia de Quadril/efeitos adversos , Seguimentos , Humanos , Desenho de Prótese , Falha de Prótese , Sistema de Registros , Reoperação , Taxa de SobrevidaRESUMO
We describe an unusual case of osteoid osteoma of the radial head that was treated by means of elbow arthroscopy. A 42-year-old man presented with a history of elbow pain lasting for 2 years that progressed after an unsuccessful previous operative procedure. Computed tomography and bone scan evaluation revealed the possibility of an osteoid osteoma of the radial head. Elbow arthroscopy under image intensifier guidance was completed to locate and remove the lesion. The shavings were collected, and a histologic analysis was performed, the findings of which were consistent with the preoperative diagnosis. An immediate decline in pain with an excellent and lasting increase in function was observed postoperatively. Radical open surgery is curative for osteoid osteoma and also allows for an excellent histologic confirmation of the diagnosis in the setting of a juxta-articular osteoid osteoma, but the residual morbidity does not justify it around accessible joint locations in this self-limited, albeit painful, disease. Thought should be given to the possibility of arthroscopic retrieval or excision with minimal operative damage before proceeding with open surgery. The use of a motorized instrument for excision does not preclude pathologic evaluation of the specimens.
Assuntos
Artroscopia/métodos , Neoplasias Ósseas/cirurgia , Osteoma Osteoide/cirurgia , Rádio (Anatomia) , Adulto , Neoplasias Ósseas/diagnóstico por imagem , Neoplasias Ósseas/patologia , Seguimentos , Humanos , Masculino , Osteoma Osteoide/diagnóstico por imagem , Osteoma Osteoide/patologia , RadiografiaRESUMO
BACKGROUND: Due to degradation and metal dissolution during articulation of metal joint replacements the chemical periprosthetic environment may change. The aim was to establish whether metal replacements cause the local changes in pH and elevated metal concentrations. METHODS: pH was measured on samples from 167 patients: native hip and knee osteoarthritic joints, joints with hip and knee replacements revised for aseptic or septic reasons. pH of synovial fluid and periprosthetic tissue was measured perioperatively using a microelectrode and pH indicator papers for removed metal components. Metal concentrations were measured in 21 samples using inductively coupled plasma mass spectrometry. RESULTS: The mean pH value of synovial fluid at native osteoarthritic joints (n = 101) was 7.78 ± 0.38. The mean pH value of synovial fluid at revision aseptic operation (n = 58) was 7.60 ± 0.31, with statistically significant difference (p = 0.002) compared to native osteoarthritic joints. The mean pH value of synovial fluid at revision septic operation (n = 8) was 7.55 ± 0.25, with statistically significant difference (p = 0.038) compared to native osteoarthritic joints. Measurements in tissue and at stems were not reliable. In the majority of samples taken at revision increased levels of cobalt and chromium were measured. CONCLUSION: A small but statistically significant difference was observed in the pH of synovial fluid between natural joints with degenerative diseases and joints treated with metal replacements. Based on the increased metal levels we expected the value of pH to be lower, but the influence of metal ions is counteracted by the buffering capacity of human body. © 2016 Wiley Periodicals, Inc. J Biomed Mater Res Part B: Appl Biomater, 105B: 2507-2515, 2017.
Assuntos
Artroplastia de Quadril , Artroplastia do Joelho , Prótese de Quadril , Prótese do Joelho , Osteoartrite do Quadril/metabolismo , Osteoartrite do Joelho/metabolismo , Líquido Sinovial/metabolismo , Adulto , Idoso , Idoso de 80 Anos ou mais , Feminino , Humanos , Concentração de Íons de Hidrogênio , Masculino , Pessoa de Meia-Idade , Osteoartrite do Quadril/cirurgia , Osteoartrite do Joelho/cirurgiaRESUMO
PURPOSE: The purpose of this study was to compare the results of revision total hip arthroplasty after fracture of primary ceramic components using different type of revision bearing surfaces. METHODS: We analysed the results of 16 patients with a follow-up more than 3 years after first revision. 6 were revised to ceramic-on-ceramic (CoC) bearing, 9 to metal-on-polyethylene (MoP) and 1 to ceramic-on-cross-linked polyethylene (CoXLP) bearing. RESULTS: The mean follow-up was 87 months. Patients with revision to CoC had higher Harris Hip Score (HHS) of 89 points in comparison to the patients with revision to MoP with 84 points. Radiographic examinations revealed visible eccentric polyethylene wear with osteolysis in 3 out of 9 patients revised to MoP. There were no detrimental x-ray changes in patients revised to CoC components. CONCLUSIONS: We consider CoC as the best option at revision operation for ceramic component fracture.
Assuntos
Óxido de Alumínio/efeitos adversos , Artroplastia de Quadril/efeitos adversos , Prótese de Quadril , Fraturas Periprotéticas/cirurgia , Reoperação/métodos , Idoso , Artroplastia de Quadril/métodos , Feminino , Seguimentos , Humanos , Masculino , Pessoa de Meia-Idade , Fraturas Periprotéticas/diagnóstico por imagem , Desenho de Prótese , Sistema de Registros , Estudos Retrospectivos , Medição de Risco , Fatores de Tempo , Resultado do Tratamento , Suporte de CargaRESUMO
BACKGROUND: To improve the long-term performance of hip prostheses, alternative bearings with metal-on-metal (MoM) and ceramic-on-ceramic (CoC) couples have been introduced. Although currently the results from the use of these bearings are in the midterm stage, there have been few comparative studies of these different bearings. METHODS: From 2000 to 2002, 487 total hip replacements were performed with use of a BICON-PLUS acetabular cup and an SL-PLUS femoral stem (Plus Orthopedics, Rotkreuz, Switzerland, now Smith & Nephew Orthopaedics). The patients were divided into three groups according to the type of bearing that was used: an MoM group (sixty-nine prostheses), a metal-on-polyethylene (MoP) group (200 prostheses), and a CoC group (218 prostheses). Patient demographic data and data with regard to revision operations were evaluated from the hospital computer database. The mean follow-up period was 8.5 years (range, 6.9 to 10.5 years). Patient activity was assessed with use of the University of California at Los Angeles activity scale. RESULTS: The mean patient age was sixty years at the time of the index arthroplasty in the MoM and CoC groups, and seventy-one years in the MoP group. Based on a scale of ten, the mean postoperative activity level was six in the CoC group, five in the MoM group, and four in the MoP group. Survival at ten years with regard to revision for any reason was 0.984, 0.956, and 0.879 for the MoP, CoC, and MoM groups, respectively. When revision for any reason was considered as the end point, survival of the MoM bearings was significantly worse than that of the MoP bearings (p = 0.005). Survival at ten years with regard to revision for aseptic loosening was 0.995, 0.990, and 0.894 for the MoP, CoC, and MoM groups, respectively. When revision for aseptic loosening was considered as the end point, survival of the MoM group was significantly worse than that of either the MoP group (p = 0.001) or the CoC group (p = 0.003). CONCLUSIONS: When comparing two groups of patients of similar mean age and mean activity level undergoing total hip arthroplasty with the use of alternative bearings, CoC bearings had better survival than did MoM bearings at the ten-year follow-up; the difference was significant when revision for aseptic loosening was defined as a failure. However, neither the CoC nor the MoM alternative bearings provided improved midterm results when compared with the results of the conventional MoP bearings. For older, less active patients, traditional metal-on-polyethylene bearings are the appropriate choice. LEVEL OF EVIDENCE: Therapeutic Level III. See Instructions for Authors for a complete description of levels of evidence.