Aminosilicone solvents for CO(2) capture.

This work describes the first report of the use of an aminosilicone solvent mix for the capture of CO(2). To maintain a liquid state, a hydroxyether co-solvent was employed which allowed enhanced physisorption of CO(2) in the solvent mixture. Regeneration of the capture solvent system was demonstrated over 6 cycles and absorption isotherms indicate a 25-50 % increase in dynamic CO(2) capacity over 30 % MEA. In addition, proof of concept for continuous CO(2) absorption was verified. Additionally, modeling to predict heats of reaction of aminosilicone solvents with CO(2) was in good agreement with experimental results.

Direct formation of Ge-C bonds from GeO(2).

Germanium dioxide in the presence of 5% KOH reacted with dimethyl carbonate (DMC) at 250 degrees C to give (MeO)(4)Ge. The reaction of GeO(2) and DMC is similar to that reported for SiO(2); however, the rate of reaction for germanium is much higher than that of the corresponding silicon reaction. In a side-by-side experiment using SiO(2) and GeO(2) where the surface area of the silicon dioxide was 2 orders of magnitude higher than that of the GeO(2), the base-catalyzed reaction with DMC was about an order of magnitude higher for the germanium dioxide. When GeO(2) and 5% KOH were reacted with DMC at 350 degrees C, two products formed: (MeO)(4)Ge (70%) and MeGe(OMe)(3) (30%). Confirmation of the identity of MeGe(OMe)(3) was by GCMS, (1)H and (13)C NMR, and comparison to an authentic sample made by reaction of MeGeCl(3) with NaOMe. Experiments to determine the mechanism of the direct formation of Ge-C from GeO(2) ruled out participation from CO, H(2), or carbon. The KOH-catalyzed reaction of other metal oxides was explored including B(2)O(3), Ga(2)O(3), TiO(2), Sb(2)O(3), SnO(2), and SnO. Boron reacted to give unknown volatile products. Antimony reacted to give a solid which analyzed as Sb(OMe)(3). SnO reacted with DMC to give a mixture that included (MeO)(4)Sn and possibly Me(3)Sn(OMe).

Reaction of silicate minerals to form tetramethoxysilane.

Several silicon dioxide sources were used as reagents in the base-mediated reaction with dimethyl carbonate (DMC) to make tetramethoxysilane (Q'). Several commercially available diatomaceous earth materials were investigated. High throughput screening was employed to explore over 200 silicate rocks and minerals as alternative silicon dioxide sources for formation of Q' from DMC and base. Amorphous silicon dioxide materials are effective reagents for the Q' forming reaction. Effective silicon dioxide sources in addition to the diatomaceous earth materials include opal and various synthetic silicates (Li, Co, and Ca).