A Novel Fast Iterative STAP Method with a Coprime Sampling Structure.

In space-time adaptive processing (STAP), the coprime sampling structure can obtain better clutter suppression capabilities at a lower hardware cost than the uniform linear sampling structure. However, in practical applications, the performance of the algorithm is often limited by the number of training samples. To solve this problem, this paper proposes a fast iterative coprime STAP algorithm based on truncated kernel norm minimization (TKNM). This method establishes a virtual clutter covariance matrix (CCM), introduces truncated kernel norm regularization technology to ensure the low rank of the CCM, and transforms the non-convex problem into a convex optimization problem. Finally, a fast iterative solution method based on the alternating direction method is presented. The effectiveness and accuracy of the proposed algorithm are verified through simulation experiments.

Electrical Impedance Tomography-Based Electronic Skin for Multi-Touch Tactile Sensing Using Hydrogel Material and FISTA Algorithm.

Flexible electronic skin (e-skin) can enable robots to have sensory forms similar to human skin, enhancing their ability to obtain more information from touch. The non-invasive nature of electrical impedance tomography (EIT) technology allows electrodes to be arranged only at the edges of the skin, ensuring the stretchability and elasticity of the skin's interior. However, the image quality reconstructed by EIT technology has deteriorated in multi-touch identification, where it is challenging to clearly reflect the number of touchpoints and accurately size the touch areas. This paper proposed an EIT-based flexible tactile sensor that employs self-made hydrogel material as the primary sensing medium. The sensor's structure, fabrication process, and tactile imaging principle were elaborated. To improve the quality of image reconstruction, the fast iterative shrinkage-thresholding algorithm (FISTA) was embedded into the EIDORS toolkit. The performances of the e-skin in aspects of assessing the touching area, quantitative force sensing and multi-touch identification were examined. Results showed that the mean intersection over union (MIoU) of the reconstructed images was improved up to 0.84, and the tactile position can be accurately imaged in the case of the number of the touchpoints up to seven (larger than two to four touchpoints in existing studies), proving that the combination of the proposed sensor and imaging algorithm has high sensitivity and accuracy in multi-touch tactile sensing. The presented e-skin shows potential promise for the application in complex human-robot interaction (HRI) environments, such as prosthetics and wearable devices.

On-Demand Energy Transfer and Energy-Aware Polling-Based MAC for Wireless Powered Sensor Networks.

To improve the performance of the wireless powered sensor network (WPSN), this paper proposes a frequency division duplex (FDD)-based on-demand energy transfer protocol and an energy-aware polling-based medium access control (MAC) protocol, called composite energy and data first (CEDF), by using the numbers of data packets and energy packets to determine polling priorities. The performance of the proposed MAC protocol, i.e., CEDF, along with the on-demand energy transfer protocol was evaluated through simulations, with comparison to the closely related protocols such as the round robin (RR) and data first (DF) polling protocols. Compared with RR and DF, our proposed CEDF performs much better in terms of throughput, data packet loss rate, and delay. Additionally, the doubly near-far problem in WPSNs under our proposed on-demand energy transfer protocol and CEDF was investigated to come up with good solutions to alleviate such a problem.

Comparing impacts of physicochemical properties and hydrolytic inhibitors on enzymatic hydrolysis of sugarcane bagasse.

An autohydrolysis pretreatment with different conditions was applied to sugarcane bagasse to compare the impacts of the physicochemical properties and hydrolytic inhibitors on its enzymatic hydrolysis. The results indicate that the autohydrolysis conditions significantly affected the physicochemical properties and inhibitors, which further affected the enzymatic hydrolysis. The inhibitor amount, pore size, and crystallinity degree increased with increasing autohydrolysis severity. Furthermore, the enzymatic hydrolysis was enhanced with increasing severity owing to the removal of hemicellulose and lignin. The physicochemical obstruction impeded the enzymatic hydrolysis more than the inhibitors. The multivariate correlated component regression analysis enabled an evaluation of the correlations between the physicochemical properties (and inhibitors) and enzymatic hydrolysis for the first time. According to the results, an autohydrolysis with a severity of 4.01 is an ideal pretreatment for sugarcane bagasse for sugar production.

[Study on out-of-pocket expenditure and related factors among cancer inpatients with Hunan Provincial Urban Employee Basic Medical Insurance].

OBJECTIVE: To explore the level and influential factors for out-of-pocket (OOP) expenditure regarding Hunan Provincial Urban Employee Basic Medical Insurance (UEBMI) and to provide evidence for improvement of medical insurance payment system.
 METHODS: Stratified random sampling method was used to obtain 10 527 records of cancer inpatients from January 2011 to December 2014. Social demographic and expenditure information were collected from UEBMI information system. The proportion of OOP expenditure for inpatient and each part of the cost was described. Multiple linear regression was used to analyze main related factors of OOP expenditure.
 RESULTS: The median proportion of OOP for inpatients costs was 20.11%, and remained stable from 2011 to 2014. The main related factors for OOP expenditure were age, civil servant, retirment status, hospital level, cost of hospitalization, hospitalization duration, medicine cost, proportion of general medical service charges, treatment cost, expenses of examination and laboratory test, and cancer type.
 CONCLUSION: OOP expenditure among UEBMI cancer inpatients was under control and stable. The level can well reflect the policy preferences. It could be further improved through the control of related factors, particularly the hospital level.

Analysis of blocking rate and bandwidth usage of mobile IPTV services in wireless cellular networks.

Mobile IPTV services over wireless cellular networks become more and more popular, owing to the significant growth in access bandwidth of wireless cellular networks such as 3G/4G and WiMAX. However, the spectrum resources of wireless cellular networks is rare. How to enhance the spectral efficiency of mobile networks becomes an important issue. Unicast, broadcast, and multicast are the most important transport schemes for offering mobile IPTV services over wireless cellular networks. Therefore, bandwidth usages and blocking rates of unicast, broadcast, and multicast IPTV services were analyzed and compared in this paper. Simulations were also conducted to validate the analytical results. Numerical results demonstrate that the presented analysis is correct, and multicast scheme achieves the best bandwidth usage and blocking rate performance, relative to the other two schemes.

Aluminum ion intercalation in mesoporous multilayer carbocatalysts promotes the conversion of glucose to 5-hydroxymethylfurfural.

In this study, an efficient modification strategy was proposed by facile loading of trace aluminum ions and p-toluene sulfonic acid (p-TSA) in carbon materials to improve their catalytic activity. p-TSA is then proven to regulate the carbonization process and promote the formation of mesoporous and multilayer structures. The hexa-coordinated aluminum structure is characterized by 1H-27Al solid-state nuclear magnetic resonance (SSNMR) and X-ray photoelectron spectroscopy, which serves as the Lewis-Brønsted acid site in carbocatalysts. Accordingly, the resulting catalyst facilitates a yield of ∼70% for converting glucose to 5-hydroxymethylfurfural (HMF) with a maximum carbon balance of around 91.4% at 150 °C in 6 h. In situ NMR, electrospray ionization mass spectrometry and isotope labeling analysis reveal that the hexa-coordinated aluminum sites promote the isomerization of glucose, and the sulfonic groups facilitate the subsequent dehydration and rehydration of fructose and levoglucosan intermediates. Kinetic models further indicate the decreased energy barrier for glucose conversion over the Al3+/p-TSA intercalated carbocatalyst. This work provides a promising strategy for engineering waste-derived carbocatalysts toward effectively converting carbohydrates to precursors of biofuels and bioplastics.

Formation of cation bridges and its promoting mechanism for sorption of sulfamethoxazole by montmorillonite.

The coexistence of metal cations is often accompanied by organic pollution and could affect the environmental fate of organics by mediating the formation of cation bridges. However, the environmental fate and risk of organics in cation co-existing environments are poorly understood due to the lack of accurate identification of cation bridge formation and stability. In this study, the sorption of sulfamethoxazole (SMX) on montmorillonite (MT) with the coexistence of three different valence metal cations (Na+, Ca2+, and Cr3+) was investigated. Ca2+ and Cr3+ can significantly promote the sorption of SMX on MT for about 5∼10 times promotion, respectively, while Na+ bridges displayed little effect on the sorption of SMX. The sorption binding energy of SMX with MT-Ca (-44.01 kcal/mol) and MT-Cr (-64.57 kcal/mol) bridges was significantly lower than that with MT-Na (-38.45 kcal/mol) and MT (-39.39 kcal/mol), indicating that the sorption affinity of SMX on Cr and Ca bridges was much stronger. The higher valence of the cations also resulted in a more stable adsorbed SMX with less desorption fluctuation. In addition, the relatively higher initial concentration of SMX and the valence of cations increased the bonding density of the cation bridges, thus promoting the apparent sorption of SMX on MT to a certain extent. This work reveals the formation and function of cation bridges in the sorption of SMX on MT. It lays a theoretical foundation for further understanding the environmental fate and risk of organics.

Improved antioxidant activity of pretreated lignin nanoparticles: Evaluation and self-assembly.

Lignin nanoparticles (LNPs) have gained significant attention for their potential as natural antioxidants. This study investigated the effect of various pretreatment methods on the lignin structure and subsequent antioxidant activity of LNPs. Among four pretreated LNPs, hydrothermal LNPs exhibited the highest antioxidant activity, surpassing unpretreated, acid-pretreated and kraft LNPs, with an impressive efficacy of 91.6%. The relationship between LNPs' structure and antioxidant activity was revealed by 2D heteronuclear singular quantum correlation (1H13C HSQC) and 31P nuclear magnetic resonance (NMR). 1H13C HSQC suggested the cleavage of ß-O-4 ether bonds, as well as a decrease in ferulic acid and p-coumaric acid, which directly influenced the antioxidant activity of LNPs. 31P NMR demonstrated a positive correlation between the total hydroxyl group content and the antioxidant activity. Besides, an isothermal kinetic model for scavenging free radicals was established based on Langmuir kinetic model instead of Freundlich model. Moreover, multilayer LNPs, based on layer-by-layer self-assembly, were prepared and exhibited remarkable antioxidant activity of 95.8%. More importantly, when blended with pure cosmetic cream, the multilayer LNPs maintained antioxidant activity of 86.7%. These finding may promote the practical applications of biomolecules, e.g. lignin additives in cosmetics and pharmaceuticals.

Coevolution between simple sequence repeats (SSRs) and virus genome size.

BACKGROUND: Relationship between the level of repetitiveness in genomic sequence and genome size has been investigated by making use of complete prokaryotic and eukaryotic genomes, but relevant studies have been rarely made in virus genomes. RESULTS: In this study, a total of 257 viruses were examined, which cover 90% of genera. The results showed that simple sequence repeats (SSRs) is strongly, positively and significantly correlated with genome size. Certain repeat class is distributed in a certain range of genome sequence length. Mono-, di- and tri- repeats are widely distributed in all virus genomes, tetra- SSRs as a common component consist in genomes which more than 100 kb in size; in the range of genome < 100 kb, genomes containing penta- and hexa- SSRs are not more than 50%. Principal components analysis (PCA) indicated that dinucleotide repeat affects the differences of SSRs most strongly among virus genomes. Results showed that SSRs tend to accumulate in larger virus genomes; and the longer genome sequence, the longer repeat units. CONCLUSIONS: We conducted this research standing on the height of the whole virus. We concluded that genome size is an important factor in affecting the occurrence of SSRs; hosts are also responsible for the variances of SSRs content to a certain degree.

Chloroplast Genome Evolution and Species Identification of Styrax (Styracaceae).

The genus Styrax L. consists of approximately 130 species distributed in the Americas, eastern Asia, and the Mediterranean region. The phylogeny and evolutionary history of this genus are not clear. Knowledge of the phylogenetic relationships and the method for species identification will be critical for the evolution of this genus. In this study, we sequenced the chloroplast genome of 17 Styrax samples and added 17 additional chloroplast genome sequences from GenBank. The data were used to investigate chloroplast genome evolution, infer phylogenetic relationships, and access the species identification rate within Styrax. The Styrax chloroplast genome contains typical quadripartite structures, ranging from 157,641 bp to 159,333 bp. The chloroplast genome contains 114 unique genes. The P distance among the Styrax species ranged from 0.0003 to 0.00611. Seventeen small inversions and SSR sites were discovered in the Styrax chloroplast genome. By comparing with the chloroplast genome sequences, six mutation hotspots were identified, and the markers ycf1b and trnT-trnL were identified as the best Styrax-specific DNA barcodes. The specific barcodes and superbarcode exhibited higher discriminatory power than universal barcodes. Chloroplast phylogenomic results improved the resolution of the phylogenetic relationships of Styrax compared to previous analyses.

Comparative Analysis of the Chloroplast Genome for Four Pennisetum Species: Molecular Structure and Phylogenetic Relationships.

The genus Pennisetum (Poaceae) is both a forage crop and staple food crop in the tropics. In this study, we obtained chloroplast genome sequences of four species of Pennisetum (P. alopecuroides, P. clandestinum, P. glaucum, and P. polystachion) using Illumina sequencing. These chloroplast genomes have circular structures of 136,346-138,119 bp, including a large single-copy region (LSC, 79,380-81,186 bp), a small single-copy region (SSC, 12,212-12,409 bp), and a pair of inverted repeat regions (IRs, 22,284-22,372 bp). The overall GC content of these chloroplast genomes was 38.6-38.7%. The complete chloroplast genomes contained 110 different genes, including 76 protein-coding genes, 30 transfer RNA (tRNA) genes, and four ribosomal RNA (rRNA) genes. Comparative analysis of nucleotide variability identified nine intergenic spacer regions (psbA-matK, matK-rps16, trnN-trnT, trnY-trnD-psbM, petN-trnC, rbcL-psaI, petA-psbJ, psbE-petL, and rpl32-trnL), which may be used as potential DNA barcodes in future species identification and evolutionary analysis of Pennisetum. The phylogenetic analysis revealed a close relationship between P. polystachion and P. glaucum, followed by P. clandestinum and P. alopecuroides. The completed genomes of this study will help facilitate future research on the phylogenetic relationships and evolution of Pennisetum species.

Effect of organosolv extraction on the structure and antioxidant activity of eucalyptus kraft lignin.

In this study, three lignin fractions F1, F2, and F3 were obtained from eucalyptus kraft lignin (EKL) by solvent extraction with ethyl acetate, acetone, and acetone/water. The antioxidant activity of these lignin fractions were measured and evaluated by using the DPPH radical scavenging activity, ABTS radical cation scavenging activity and ferric reducing antioxidant power analysis. These lignin fractions were also characterized by applying Gel permeation chromatography, Fourier transform infrared, 31P NMR and 2D HSQC NMR techniques. The three different lignin fractions had rather different average molecular sizes, as well as different phenolic and methoxy functional contents. The ethyl acetate fraction (F1) with the lowest average molecular weight (2342 g/mol) and the highest phenolic hydroxyl content (4.2457 mmol/g) and methoxy groups (6.2714 mmol/g) showed high homogeneity and the highest antioxidant activity. Its DPPH scavenging activity, ABTS+ scavenging activity, and ferric reducing the antioxidant power were 68.67%, 75.57%, and 91.89 µmol/g, respectively. Moreover, the antioxidant activity of F1 and F2 was found to be higher than that of butylated hydroxytoluene. Therefore, solvent extraction was shown to be an effective way to separate lignin fractions with high homogeneity, high antioxidant activity, which could lead to application of lignin with higher value.

Effect of Pretreatments on the Enzymatic Hydrolysis of High-Yield Bamboo Chemo-Mechanical Pulp by Changing the Surface Lignin Content.

Hydrogen peroxide chemo-mechanical pulp (APMP), sulfonated chemo-mechanical pulp (SCMP), and chemical thermomechanical pulp (CTMP) were used as raw materials to explore the effects of hydrogen peroxide (HP), Fenton pretreatment (FP), and ethanol pretreatment (EP) on the enzymatic hydrolysis of high-yield bamboo mechanical pulp (HBMP). The surface lignin distribution and contents of different HBMPs were determined using confocal laser scanning microscopy (CLSM) and X-ray photoelectron spectroscopy (XPS). The correlation between the surface lignin and the enzymatic hydrolysis of HBMP was also investigated. The residue of enzymatic hydrolysis was used to adsorb methylene blue (MB). The results showed that the cracks and fine fibers on the surface of APMP, SCMP, and CTMP increased after FP, when compared to HP and EP. The total removal content of hemicellulose and lignin in SCMP after FP was higher than with HP and EP. Compared to SCMP, the crystallinity increased by 15.4%, and the surface lignin content of Fenton-pretreated SCMP decreased by 11.7%. The enzymatic hydrolysis efficiency of HBMP after FP was higher than with HP and EP. The highest enzymatic hydrolysis of Fenton-pretreated SCMP was 49.5%, which was higher than the enzymatic hydrolysis of Fenton-pretreated APMP and CTMP. The removal rate of MB reached 94.7% after the adsorption of the enzymatic hydrolysis residue of SCMP. This work provides an effective approach for a high value-added utilization of high-yield bamboo pulp.

Electrocoagulation pre-treatment to simultaneously remove dissolved and colloidal substances and Ca2+ in old corrugated container wastewater.

An effective electrocoagulation pre-treatment (ECP) method was proposed to simultaneously solve the problems of the micro stickies deposition and high Ca2+ content in old corrugated container (OCC) papermaking wastewater during the recycling process. The optimal ECP condition was investigated. The results indicated that the effect of an Al electrode on wastewater treatment was superior to that of a Fe or Mg electrode. The optimal treatment conditions of the current density, electrode distance and reaction time were 115 A m-2, 5 cm and 60 min, respectively. After the ECP, the chemical oxygen demand (COD) and Ca2+ removal rates were 75.33% and 64.53%, respectively, and the turbidity and dissolved and colloidal substance (DCS) content decreased by 97.1% and 43.68%, respectively. The particle size of flocs in the liquid increased from 1.675 µm to 31.97 µm, and the floc content was 0.78 g L-1 after ECP. The anode material and energy consumption were 0.1846 kg m-3 and 4.56 kWh m-3, respectively, and the cost of treatment was estimated to be 1.11 $ m-3. The results demonstrate that ECP can effectively remove the micro stickies, COD, and Ca2+ in the OCC wastewater, which is conducive to reducing the cost of wastewater treatment and conform to the requirements of sustainable development.

In situ growth gold nanoparticles in three-dimensional sugarcane membrane for flow catalytical and antibacterial application.

In this work, we decorated gold nanoparticles (Au NPs) in the porous, three-dimensional sugarcane membrane for the flow catalytical and antibacterial application. Due to the uniformly distributed Au NPs in sugarcane channels and the porous structure of sugarcane, the interaction between contaminant and catalysis was enhanced as water flowing through the Au NPs/sugarcane membrane. The Au NPs/sugarcane membrane exhibited superior catalytical efficiency for removing methylene blue (MB) with a turn over frequency of 0.27 molMB·molAu-1·min-1 and the water treatment rate reached up to 1.15×105 L/m2 h with >98.3 % MB removal efficiency. The Au NPs/sugarcane membrane also exhibited superior bacterial removal efficiency as E. coli suspension flowing through it, due to the superimposition effects of physical barrier in sugarcane and the antibacterial property of Au NPs. The tremendous catalytical and antibacterial performance of Au NPs/sugarcane membrane provides a promising potential for the rational design of flow catalytical membrane reactor to purify the microbial contaminated water.

Flexible conductive hydrogel fabricated with polyvinyl alcohol, carboxymethyl chitosan, cellulose nanofibrils, and lignin-based carbon applied as strain and pressure sensor.

Employing renewable, environmentally friendly, low-cost lignocellulose to design flexible pressure sensitive hydrogel (PSH) as strain and pressure sensors in wearable electronics represents the global perspective to build sustainable and green society. Lignin-based carbon (LC), as the conductive filler, were uniform distributed in the hydrogel system composing by polyvinyl alcohol (PVA), carboxymethyl chitosan (CMC), and cellulose nanofibrils (CNF) to assemble PSH. The analysis revealed that the cross-linking of components through hydrogen bonds formed among hydroxyl group, amino group and carboxyl group exerts the hydrogel with stretching ability and fatigue resistance. The results indicated that the fracture tensile strength and compression stress of the PC/CNF/LC hydrogel were 133 kPa and 37.7 kPa, respectively. Because of the existence of LC, PSH hydrogel exhibits the sensitive deformation-dependent conductivity and can be applied as a flexible strain and pressure sensor monitoring body motions such as elbow flexion, finger bend and palm grip. Therefore, the assembled PSH hydrogel is a prominent candidate applying as the strain and pressure sensor devices.

Impact of bagasse lignin-carbohydrate complexes structural changes on cellulase adsorption behavior.

Pretreatment technology has attracted much attention as an effective method for the conversion of sugarcane bagasse into biochemicals. However, residual lignin-carbohydrate complexes (LCC) can negatively impact the subsequent enzymatic hydrolysis of bagasse. In this work, the changes in bagasse LCC after pretreatment with hot water and dilute acid were characterized by component analysis, 13C NMR and 1H-13C HSQC NMR to reveal the correlation between LCC structure and cellulase adsorption. A real-time dynamic model of LCC affecting adsorption of cellulase was constructed using a quartz crystal microbalance (QCM-D). The QCM-D results demonstrated that cellulase exhibited different adsorption characteristics on different LCCs. For example, the maximum adsorption capacities for cellulase onto the raw material LCC (RW-LCC), hot water pretreated LCC (LHW-LCC), and dilute acid pretreated LCC (AP-LCC) at 4 °C were 29.0 ng/cm2, 94.9 ng/cm2 and 129.8 ng/cm2, respectively. In addition, the adsorption rate constants for cellulase on RM-LCC, LHW-LCC and AP-LCC at 4 °C were 0.09, 0.14 and 0.19, respectively.

Nano MnO2 Radially Grown on Lignin-Based Carbon Fiber by One-Step Solution Reaction for Supercapacitors with High Performance.

MnO2-deposited lignin-based carbon fiber (MnO2-LCF) mats are fabricated for supercapacitor applications. LCF mats are produced from alkali lignin via electrospinning followed by stabilization and carbonization. The carbonization process is carried out at 800, 900, and 1000 °C, and the corresponding mats are denoted as MnO2-LCF-800, MnO2-LCF-900, and MnO2-LCF-1000, respectively. The LCF mats are immersed in a KMnO4 solution at room temperature for 72 h to obtain MnO2-LCF mats. The scanning electron microscopy and X-ray diffraction analysis confirm the deposition of MnO2 on the LCFs. The Brunauer-Emmett-Teller analysis, X-ray spectroscopy, and Raman spectroscopy reveal that MnO2-LCF-800 mat possesses a large number of mesopores and Mn vacancies as compared to MnO2-LCF-900 mat and MnO2-LCF-1000 mat. Consequently, MnO2-LCF-800 mat possesses the best electrochemical properties with a specific capacitance of 131.28 F∙g-1, an energy density of 14.77 Wh∙kg-1, and a power density of 135.01 W∙kg-1 at a specific current of 0.3 A∙g-1. Hence, MnO2-LCF-800 mat shows high potential to be used as a high-performance supercapacitor.

Characterization of the complete chloroplast genome sequence of Dalbergia species and its phylogenetic implications.

The pantropical plant genus Dalbergia comprises approximately 250 species, most of which have a high economic and ecological value. However, these species are among the most threatened due to illegal logging and the timber trade. To enforce protective legislation and ensure effective conservation of Dalbergia species, the identity of wood being traded must be accurately validated. For the rapid and accurate identification of Dalbergia species and assessment of phylogenetic relationships, it would be highly desirable to develop more effective DNA barcodes for these species. In this study, we sequenced and compared the chloroplast genomes of nine species of Dalbergia. We found that these chloroplast genomes were conserved with respect to genome size, structure, and gene content and showed low sequence divergence. We identified eight mutation hotspots, namely, six intergenic spacer regions (trnL-trnT, atpA-trnG, rps16-accD, petG-psaJ, ndhF-trnL, and ndhG-ndhI) and two coding regions (ycf1a and ycf1b), as candidate DNA barcodes for Dalbergia. Phylogenetic analyses based on whole chloroplast genome data provided the best resolution of Dalbergia, and phylogenetic analysis of the Fabaceae showed that Dalbergia was sister to Arachis. Based on comparison of chloroplast genomes, we identified a set of highly variable markers that can be developed as specific DNA barcodes.