Superior Radiation Resistance of ZrO2-Modified W Composites.

The microstructure and mechanical properties of pure W, sintered and swaged W-1.5ZrO2 composites after 1.5 × 1015 Au+/cm2 radiation at room temperature were characterized to investigate the impact of the ZrO2 phase on the irradiation resistance mechanism of tungsten materials. It can be concluded that the ZrO2 phase near the surface consists of two irradiation damage layers, including an amorphous layer and polycrystallization regions after radiation. With the addition of the ZrO2 phase, the total density and average size of dislocation loops, obviously, decrease, attributed to the reason that many more glissile 1/2<111> loops migrate to annihilate preferentially at precipitate interfaces with a higher sink strength of 7.8 × 1014 m−2. The swaged W-1.5ZrO2 alloys have a high enough density of precipitate interfaces and grain boundaries to absorb large numbers of irradiated dislocations. This leads to the smallest irradiation hardening change in hardness of 4.52 Gpa, which is far superior to pure W materials. This work has a collection of experiments and conclusions that are of crucial importance to the materials and nuclear communities.

Iron Nanoparticles Encapsulated in S,N-Codoped Carbon: Sulfur Doping Enriches Surface Electron Density and Enhances Electrocatalytic Activity toward Oxygen Reduction.

Development of highly efficient nonprecious metal (NPM) catalysts for oxygen reduction reaction (ORR) in acidic media is challenging but of great significance. Herein, an effective ORR catalyst based on Fe nanoparticles encapsulated by S,N-codoped few-layer defective carbon (Fe@S,N-DC) was synthesized via a microwave-assisted strategy. The obtained Fe@S,N-DC nanocomposite showed a remarkable electrocatalytic activity toward ORR in acidic media, with a half-wave potential (E1/2) of +0.785 V versus reversible hydrogen electrode, which was 80 mV more positive than that of the sulfur-free counterpart (Fe@N-DC). Furthermore, due to the protection by the S,N-codoped carbon shell, the Fe@S,N-DC nanocomposite displayed apparent stability with only a 13 mV negative shift of E1/2 after 10,000 cycles and excellent tolerance to methanol. X-ray absorption near-edge spectroscopy measurements confirmed the formation of multiple defective sites on the S,N-codoped carbon surface and strong interfacial electron transfer from the Fe core to the outer carbon surface, as compared to the sulfur-free counterpart. The enriched electron density on the defective carbon surface of Fe@S,N-DC, induced by the interfacial electron transfer, facilitated the reduction of O2 to OOH*, leading to enhanced ORR performance. These results shed light on the significance of S doping in Fe-N-C catalysts in the design of high-performance NPM catalysts for ORR in acidic media.

Surrounded catalysts prepared by ion-exchange inverse loading.

The supported catalyst featuring highly dispersed active phase on support is the most important kind of industrial catalyst. Extensive research has demonstrated the critical role (in catalysis) of the interfacial interaction/perimeter sites between the active phase and support. However, the supported catalyst prepared by traditional methods generally presents low interface density because of limit contact area. Here, an ion-exchange inverse loading (IEIL) method has been developed, in which the precursor of support is controllably deposited onto the precursor of active phase by ion-exchange reaction, leading to an active core surrounded (by support) catalyst with various structures. The unique surrounded structure presents not only high interface density and mutually changed interface but also high stability due to the physical isolation of active phase, revealing superior catalytic performances to the traditional supported catalysts, suggesting the great potential of this new surrounded catalyst as the upgrade of supported catalyst in heterogeneous catalysis.