Cold granular targets slow the bulk freezing of an impacting droplet.

When making contact with an undercooled target, a drop freezes. The colder the target is, the more rapid the freezing is supposed to be. In this research, we explore the impact of droplets on cold granular material. As the undercooling degree increases, the bulk freezing of the droplet is delayed by at least an order of magnitude. The postponement of the overall solidification is accompanied by substantial changes in dynamics, including the spreading-retraction process, satellite drop generation, and cratering in the target. The solidification of the wetted pores in the granular target primarily causes these effects. The freezing process over the pore dimension occurs rapidly enough to match the characteristic timescales of impact dynamics at moderate undercooling degrees. As a result, the hydrophilic impact appears "hydrophobic," and the dimension of the solidified droplet shrinks. A monolayer of cold grains on a surface can reproduce these consequences. Our research presents a potential approach to regulate solidified morphology for subfreezing drop impacts. It additionally sheds light on the impact scenario of strong coupling between the dynamics and solidification.

Spatiotemporal genotype replacement of H5N8 avian influenza viruses contributed to H5N1 emergence in 2021/2022 panzootic.

Since 2020, clade 2.3.4.4b highly pathogenic avian influenza H5N8 and H5N1 viruses have swept through continents, posing serious threats to the world. Through comprehensive analyses of epidemiological, genetic, and bird migration data, we found that the dominant genotype replacement of the H5N8 viruses in 2020 contributed to the H5N1 outbreak in the 2021/2022 wave. The 2020 outbreak of the H5N8 G1 genotype instead of the G0 genotype produced reassortment opportunities and led to the emergence of a new H5N1 virus with G1's HA and MP genes. Despite extensive reassortments in the 2021/2022 wave, the H5N1 virus retained the HA and MP genes, causing a significant outbreak in Europe and North America. Furtherly, through the wild bird migration flyways investigation, we found that the temporal-spatial coincidence between the outbreak of the H5N8 G1 virus and the bird autumn migration may have expanded the H5 viral spread, which may be one of the main drivers of the emergence of the 2020-2022 H5 panzootic.IMPORTANCESince 2020, highly pathogenic avian influenza (HPAI) H5 subtype variants of clade 2.3.4.4b have spread across continents, posing unprecedented threats globally. However, the factors promoting the genesis and spread of H5 HPAI viruses remain unclear. Here, we found that the spatiotemporal genotype replacement of H5N8 HPAI viruses contributed to the emergence of the H5N1 variant that caused the 2021/2022 panzootic, and the viral evolution in poultry of Egypt and surrounding area and autumn bird migration from the Russia-Kazakhstan region to Europe are important drivers of the emergence of the 2020-2022 H5 panzootic. These findings provide important targets for early warning and could help control the current and future HPAI epidemics.

A review of the clinical efficacy of FDA-approved antibody‒drug conjugates in human cancers.

While strategies such as chemotherapy and immunotherapy have become the first-line standard therapies for patients with advanced or metastatic cancer, acquired resistance is still inevitable in most cases. The introduction of antibody‒drug conjugates (ADCs) provides a novel alternative. ADCs are a new class of anticancer drugs comprising the coupling of antitumor mAbs with cytotoxic drugs. Compared with chemotherapeutic drugs, ADCs have the advantages of good tolerance, accurate target recognition, and small effects on noncancerous cells. ADCs occupy an increasingly important position in the therapeutic field. Currently, there are 13 Food and Drug Administration (FDA)‒approved ADCs and more than 100 ADC drugs at different stages of clinical trials. This review briefly describes the efficacy and safety of FDA-approved ADCs, and discusses the related problems and challenges to provide a reference for clinical work.

Synergistic effects of graphene microgrooves and electrical stimulation on M2 macrophage polarization.

Macrophages play a crucial role in host response and wound healing, with M2 polarization contributing to the reduction of foreign-body reactions induced by the implantation of biomaterials and promoting tissue regeneration. Electrical stimulation (ES) and micropatterned substrates have a significant impact on the macrophage polarization. However, there is currently a lack of well-established cell culture platforms for studying the synergistic effects of these two factors. In this study, we prepared a graphene free-standing substrate with 20 µm microgrooves using capillary forces induced by water evaporation. Subsequently, we established an ES cell culture platform for macrophage cultivation by integrating a self-designed multi-well chamber cell culture device. We observed that graphene microgrooves, in combination with ES, significantly reduce cell spreading area and circularity. Results from immunofluorescence, ELISA, and flow cytometry demonstrate that the synergistic effect of graphene microgrooves and ES effectively promotes macrophage M2 phenotypic polarization. Finally, RNA sequencing results reveal that the synergistic effects of ES and graphene microgrooves inhibit the macrophage actin polymerization and the downstream PI3K signaling pathway, thereby influencing the phenotypic transition. Our results demonstrate the potential of graphene-based microgrooves and ES to synergistically modulate macrophage polarization, offering promising applications in regenerative medicine.

Immune to temperature interference sensor of carbon dioxide gas concentration based on a single modified fiber Bragg grating.

In this study, a novel method that can detect carbon dioxide (CO2) concentration and realize temperature immunity based on only one fiber Bragg grating (FBG) is proposed. The outstanding contribution lies in solving the temperature crosstalk issue of FBG and ensuring the accuracy of detection results under the condition of anti-temperature interference. To achieve immunity to temperature interference without changing the initial structure of FBG, the optical fiber cladding of FBG and adjacent optical fiber cladding at both ends of FBG are modified by a polymer coating. Moreover, a universal immune temperature demodulation algorithm is derived. The experimental results demonstrate that the temperature response sensitivity of the improved FBG is controlled within the range of 0.00407 nm/°C. Compared with the initial FBG (the temperature sensitivity of the initial FBG is 0.04 nm/°C), it decreases by nearly 10 times. Besides, the gas response sensitivity of FBG reaches 1.6 pm/ppm and has overwhelmingly ideal linearity. The detection error results manifest that the gas concentration error in 20 groups of data does not exceed 3.16 ppm. The final reproducibility research shows that the difference in detection sensitivity between the two sensors is 0.08 pm/ppm, and the relative error of linearity is 1.07%. In a word, the proposed method can accurately detect the concentration of CO2 gas and is efficiently immune to temperature interference. The sensor we proposed has the advantages of a simple production process, low cost, and satisfactory reproducibility. It also has the prospect of mass production.

Freezing Delay of a Drop Impacting on a Monolayer of Cold Grains.

We investigate a subfreezing droplet impact scenario in a low-humidity environment, where the target is a cold granular monolayer. When the undercooling degree of targets passes a threshold, such a granular layer effectively postpones the bulk freezing time of the droplet in comparison with the impact on the bare substrate underneath. In this case, the retraction of the droplet after impact reduces the contact area with the cold substrate, even though both the grains and the substrate are wettable to the liquid. We find that the significant changes in the dynamic behavior are triggered by freezing the liquid that wets the pores. Owing to the small dimension of the pores, the freezing process is rapid enough to match the dynamics over the droplet dimension. In certain circumstances, the rapid freezing may even stop liquid penetration and shed icing from the surface underneath.

Targeted pH-Activated Peptide-Based Nanomaterials for Combined Photodynamic Therapy with Immunotherapy.

Photodynamic therapy (PDT) has demonstrated efficacy in eliminating local tumors, yet its effectiveness against metastasis is constrained. While immunotherapy has exhibited promise in a clinical context, its capacity to elicit significant systemic antitumor responses across diverse cancers is often limited by the insufficient activation of the host immune system. Consequently, the combination of PDT and immunotherapy has garnered considerable attention. In this study, we developed pH-responsive porphyrin-peptide nanosheets with tumor-targeting capabilities (PRGD) that were loaded with the IDO inhibitor NLG919 for a dual application involving PDT and immunotherapy (PRGD/NLG919). In vitro experiments revealed the heightened cellular uptake of PRGD/NLG919 nanosheets in tumor cells overexpressing αvß3 integrins. The pH-responsive PRGD/NLG919 nanosheets demonstrated remarkable singlet oxygen generation and photocytotoxicity in HeLa cells in an acidic tumor microenvironment. When treating HeLa cells with PRGD/NLG919 nanosheets followed by laser irradiation, a more robust adaptive immune response occurred, leading to a substantial proliferation of CD3+CD8+ T cells and CD3+CD4+ T cells compared to control groups. Our pH-responsive targeted PRGD/NLG919 nanosheets therefore represent a promising nanosystem for combination therapy, offering effective PDT and an enhanced host immune response.

Positively Charged Biodegradable Polymersomes with Structure Inherent Fluorescence as Artificial Organelles.

Polymersomes, nanosized polymeric vesicles, have attracted significant interest in the areas of artificial cells and nanomedicine. Given their size, their visualization via confocal microscopy techniques is often achieved through the physical incorporation of fluorescent dyes, which however present challenges due to potential leaching. A promising alternative is the incorporation of molecules with aggregation-induced emission (AIE) behavior that are capable of fluorescing exclusively in their assembled state. Here, we report on the use of AIE polymersomes as artificial organelles, which are capable of undertaking enzymatic reactions in vitro. The ability of our polymersome-based artificial organelles to provide additional functionality to living cells was evaluated by encapsulating catalytic enzymes such as a combination of glucose oxidase/horseradish peroxidase (GOx/HRP) or ß-galactosidase (ß-gal). Via the additional incorporation of a pyridinium functionality, not only the cellular uptake is improved at low concentrations but also our platform's potential to specifically target mitochondria expands.

Differential diagnosis of breast mucinous carcinoma with an oval shape from fibroadenoma based on ultrasonographic features.

BACKGROUND: Approximately 50% of breast mucinous carcinomas (MCs) are oval and have the possibility of being misdiagnosed as fibroadenomas (FAs). We aimed to identify the key features that can help differentiate breast MC with an oval shape from FA on ultrasonography (US). METHODS: Seventy-six MCs from 71 consecutive patients and 50 FAs with an oval shape from 50 consecutive patients were included in our study. All lesions pathologically diagnosed. According to the Breast Imaging Reporting and Data System (BI-RADS), first, the ultrasonographic features of the MCs and FAs were recorded and a final category was assessed. Then, the differences in ultrasonographic characteristics between category 4 A (low-risk group) and category 4B-5 (medium-high- risk group) MCs were identified. Finally, other ultrasonographic features of MC and FA both with an oval shape were compared to determine the key factors for differential diagnosis. The Mann-Whitney test, χ2 test or Fisher's exact test was used to compare data between groups. RESULTS: MCs with an oval shape (81.2%) and a circumscribed margin (25%) on US were more commonly assessed in the low-risk group (BI-RADS 4 A) than in the medium-high-risk group (BI-RADS 4B-5) (20%, p < 0.001 and 0%, p = 0.001, respectively). Compared with those with FA, patients with MC were older, and tended to have masses with non-hypoechoic patterns, not circumscribed margins, and a posterior echo enhancement on US (p < 0.001, p < 0.001, and p = 0.003, respectively). CONCLUSION: The oval shape was the main reason for the underestimation of MCs. On US, an oval mass found in the breast of women of older age with non-hypoechoic patterns, not circumscribed margins, and a posterior echo enhancement was associated with an increased risk of being an MC, and should be subjected to active biopsy.

Sequential neoadjuvant chemotherapy using pegylated liposomal doxorubicin and cyclophosphamide followed by taxanes with complete trastuzumab and pertuzumab treatment for HER2-positive breast cancer: A phase II single-arm study.

Objective: Despite cardiotoxicity overlap, the trastuzumab/pertuzumab and anthracycline combination remains crucial due to significant benefits. Pegylated liposomal doxorubicin (PLD), a less cardiotoxic anthracycline, was evaluated for efficacy and cardiac safety when combined with cyclophosphamide and followed by taxanes with trastuzumab/pertuzumab in human epidermal growth factor receptor-2 (HER2)-positive early breast cancer (BC). Methods: In this multicenter, phase II study, patients with confirmed HER2-positive early BC received four cycles of PLD (30-35 mg/m2) and cyclophosphamide (600 mg/m2), followed by four cycles of taxanes (docetaxel, 90-100 mg/m2 or nab-paclitaxel, 260 mg/m2), concomitant with eight cycles of trastuzumab (8 mg/kg loading dose, then 6 mg/kg) and pertuzumab (840 mg loading dose, then 420 mg) every 3 weeks. The primary endpoint was total pathological complete response (tpCR, ypT0/is ypN0). Secondary endpoints included breast pCR (bpCR), objective response rate (ORR), disease control rate, rate of breast-conserving surgery (BCS), and safety (with a focus on cardiotoxicity). Results: Between May 27, 2020 and May 11, 2022, 78 patients were treated with surgery, 42 (53.8%) of whom had BCS. After neoadjuvant therapy, 47 [60.3%, 95% confidence interval (95% CI), 48.5%-71.2%] patients achieved tpCR, and 49 (62.8%) achieved bpCR. ORRs were 76.9% (95% CI, 66.0%-85.7%) and 93.6% (95% CI, 85.7%-97.9%) after 4-cycle and 8-cycle neoadjuvant therapy, respectively. Nine (11.5%) patients experienced asymptomatic left ventricular ejection fraction (LVEF) reductions of ≥10% from baseline, all with a minimum value of >55%. No treatment-related abnormal cardiac function changes were observed in mean N-terminal pro-BNP (NT-proBNP), troponin I, or high-sensitivity troponin. Conclusions: This dual HER2-blockade with sequential polychemotherapy showed promising activity with rapid tumor regression in HER2-positive BC. Importantly, this regimen showed an acceptable safety profile, especially a low risk of cardiac events, suggesting it as an attractive treatment approach with a favorable risk-benefit balance.

Polymer Vesicles with Integrated Photothermal Responsiveness.

Functionalized polymer vesicles have been proven to be highly promising in biomedical applications due to their good biocompatibility, easy processability, and multifunctional responsive capacities. However, photothermal-responsive polymer vesicles triggered by near-infrared (NIR) light have not been widely reported until now. Herein, we propose a new strategy for designing NIR light-mediated photothermal polymer vesicles. A small molecule (PTA) with NIR-triggered photothermal features was synthesized by combining a D-D'-A-D'-D configuration framework with a molecular rotor function (TPE). The feasibility of the design strategy was demonstrated through density functional theory calculations. PTA moieties were introduced in the hydrophobic segment of a poly(ethylene glycol)-poly(trimethylene carbonate) block copolymer, of which the carbonate monomers were modified in the side chain with an active ester group. The amphiphilic block copolymers (PEG44-PTA2) were then used as building blocks for the self-assembly of photothermal-responsive polymer vesicles. The new class of functionalized polymer vesicles inherited the NIR-mediated high photothermal performance of the photothermal agent (PTA). After NIR laser irradiation for 10 min, the temperature of the PTA-Ps aqueous solution was raised to 56 °C. The photothermal properties and bilayer structure of PTA-Ps after laser irradiation were still intact, which demonstrated that they could be applied as a robust platform in photothermal therapy. Besides their photothermal performance, the loading capacity of PTA-Ps was investigated as well. Hydrophobic cargo (Cy7) and hydrophilic cargo (Sulfo-Cy5) were successfully encapsulated in the PTA-Ps. These properties make this new class of functionalized polymer vesicles an interesting platform for synergistic therapy in anticancer treatment.

Intermittent Exothermic and Self-Healing Hydrated Salt Gels for Advanced Thermal Management of Underfloor Radiant Heating System.

Phase change materials (PCMs) have great prospects in thermal management applications because they can store and release latent heat. However, they are not suitable for on-demand heating as they can only release heat once. Herein, this work reports the intermittent exothermic of PCMs based on a supersaturated salt solution, exhibiting fully controlled long-term storage of energy, releasing and suspending heat on demand. Due to the high energy barrier, it is difficult for the supersaturated salt solution to nucleate; thus, it can store energy for a long time. Contact with seeds or other foreign objects can destroy the metastable state of the supersaturated salt solution and promote the formation of crystal nuclei, enabling crystallization and heat release on demand. The release of crystallization heat can be interrupted using scissors dip in water. Additionally, self-healing behavior allows it to be recycled and last longer, due to the presence of Fe3+ , inducing strong dynamic reversible non-covalent crosslinking through metal coordination bonds. Furthermore, the hydrated salts gels are applied for thermal management of underfloor radiant heating system, demonstrating four types of intermittent exotherms sequences amazingly. Further, the intermittent exothermic hydrated salts gels provide a more user-friendly thermal management of underfloor radiant heating systems.

Palladium-Catalyzed Thiocarbonylation of Aryl Iodides Using CO2.

The first example of catalytic thiocarbonylation of aryl iodides using CO2 has been achieved employing a combination of PdCl2 and carbazole-derived phosphine ligands. Under mild conditions, a broad scope of aryl iodides were converted to the desired thioester products in the presence of aryl or alkyl thiols (33 examples, up to 96% yields). The choice of metal, ligands, and reductant were crucial for high efficiency and chemoselectivity. Moreover, this strategy provided an effective method for the late-stage functionalization of biorelevant molecules.

Fe and Cu Double-Doped Co3O4 Nanorod with Abundant Oxygen Vacancies: A High-Rate Electrocatalyst for Tandem Electroreduction of Nitrate to Ammonia.

The electrochemical nitrate reduction reaction (NO3RR) is an attractive green alternative to the conventional Haber-Bosch method for the synthesis of NH3. However, this reaction is a tandem process that involves multiple steps of electrons and protons, posing a significant challenge to the efficient synthesis of NH3. Herein, we report a high-rate NO3RR electrocatalyst of Fe and Cu double-doped Co3O4 nanorod (Fe1/Cu2-Co3O4) with abundant oxygen vacancies, where the Cu preferentially catalyzes the rapid conversion of NO3- to NO2- and the oxygen vacancy in the Co3O4 substrate can accelerate NO2- reduction to NH3. In addition, the introduction of Fe can efficiently capture atomic H* that promotes the dynamics of NO2- to NH3, improving Faradaic efficiency of the produced NH3. Controlled experimental results show that the optimal electrocatalyst of Fe1/Cu2-Co3O4 exhibits good performance with high conversion (93.39%), Faradaic efficiency (98.15%), and ammonia selectivity (98.19%), which is significantly better than other Co-based materials. This work provides guidance for the rational design of high-performance NO3RR catalysts.

Compartmentalized Intracellular Click Chemistry with Biodegradable Polymersomes.

Polymersome nanoreactors that can be employed as artificial organelles have gained much interest over the past decades. Such systems often include biological catalysts (i.e., enzymes) so that they can undertake chemical reactions in cellulo. Examples of nanoreactor artificial organelles that acquire metal catalysts in their structure are limited, and their application in living cells remains fairly restricted. In part, this shortfall is due to difficulties associated with constructing systems that maintain their stability in vitro, let alone the toxicity they impose on cells. This study demonstrates a biodegradable and biocompatible polymersome nanoreactor platform, which can be applied as an artificial organelle in living cells. The ability of the artificial organelles to covalently and non-covalently incorporate tris(triazolylmethyl)amine-Cu(I) complexes in their membrane is shown. Such artificial organelles are capable of effectively catalyzing a copper-catalyzed azide-alkyne cycloaddition intracellularly, without compromising the cells' integrity. The platform represents a step forward in the application of polymersome-based nanoreactors as artificial organelles.

Effects of Hot Pixels on Pixel Performance on Backside Illuminated Complementary Metal Oxide Semiconductor (CMOS) Image Sensors.

Effects of hot pixels on pixel performance in light and dark environments have been investigated in pinned photodiode 0.18 µm backside illuminated CMOS image sensors irradiated by 10 MeV protons. After exposure to protons, hot pixels and normal pixels are selected from the whole pixel array, and their influences on key parameters are analyzed. Experimental results show that radiation-induced hot pixels have a significant impact on pixel performance in dark environments, such as dark signal nonuniformity, long integration time, and random telegraph signal. Hot pixels are caused by defects with complex structures, i.e., cluster defects. Furthermore, the dark current activation energy result confirms that the defects causing the hot pixels have defect energy levels close to mid-gap.

Preparation of Biochar with Developed Mesoporous Structure from Poplar Leaf Activated by KHCO3 and Its Efficient Adsorption of Oxytetracycline Hydrochloride.

The effective removal of oxytetracycline hydrochloride (OTC) from the water environment is of great importance. Adsorption as a simple, stable, and cost-effective technology is regarded as an important method for removing OTC. Herein, a low-cost biochar with a developed mesoporous structure was synthesized via pyrolysis of poplar leaf with potassium bicarbonate (KHCO3) as the activator. KHCO3 can endow biochar with abundant mesopores, but excessive KHCO3 cannot continuously promote the formation of mesoporous structures. In comparison with all of the prepared biochars, PKC-4 (biochar with a poplar leaf to KHCO3 mass ratio of 5:4) shows the highest adsorption performance for OTC as it has the largest surface area and richest mesoporous structure. The pseudo-second-order kinetic model and the Freundlich equilibrium model are more consistent with the experimental data, which implies that the adsorption process is multi-mechanism and multi-layered. In addition, the maximum adsorption capacities of biochar are slightly affected by pH changes, different metal ions, and different water matrices. Moreover, the biochar can be regenerated by pyrolysis, and its adsorption capacity only decreases by approximately 6% after four cycles. The adsorption of biochar for OTC is mainly controlled by pore filling, though electrostatic interactions, hydrogen bonding, and π-π interaction are also involved. This study realizes biomass waste recycling and highlights the potential of poplar leaf-based biochar for the adsorption of antibiotics.

In Situ Low-Temperature Carbonization Capping of LiFePO4 with Coke for Enhanced Lithium Battery Performance.

Lithium batteries incorporating LiFePO4 (LFP) as the cathode material have gained significant attention in recent research. However, the limited electronic and ionic conductivity of LFP poses challenges to its cycling performance and overall efficiency. In this study, we address these issues by synthesizing a series of LiFePO4/carbon (LFP/C) composites through low-temperature carbonization coating of LFP in the presence of Coke as the carbon source. The resulting lithium batteries utilizing LFP/C as the cathode material exhibited impressive discharge specific capacities of 148.35 mA·h/g and 126.74 mA·h/g at 0.1 C and 1 C rates, respectively. Even after 200 cycles of charging and discharging, the capacities remained remarkably high, with values of 93.74% and 97.05% retention, showcasing excellent cycling stability. Notably, the LFP/C composite displayed exceptional rate capability, and capacity retention of 99.27% after cycling at different multiplication rates. These findings underscore the efficacy of in situ low-temperature carbonization capping of LFP with Coke in significantly improving both the cycling stability and rate capability of lithium batteries.

Facile Electrochemical Synthesis of Bifunctional Needle-like Co-P Nanoarray for Efficient Overall Water Splitting.

The development of low-cost and high-performance bifunctional electrocatalysts for overall water splitting is still challenging. Herein, we employed a facile electrodeposition method to prepare bifunctional cobalt phosphide for overall water splitting. The needle-like cobalt phosphide (Co-P-1) nanoarray is uniformly distributed on nickel foam. Co-P-1 exhibits excellent electrocatalytic activity for hydrogen evolution reaction (HER, 85 mV at 10 mA/cm2, 60 mV/dec) and oxygen evolution reaction (OER, 294 mV at 50 mA/cm2, 60 mV/dec). The cell-voltage of 1.60 V is found to achieve the current density of 10 mA/cm2 for overall water splitting in the two-electrode system, comparable to that of previously reported Pt/C/NF||RuO2/NF. The excellent electrocatalytic performance can be attributed to the needle-like structure with more active sites, accelerated charge transfer and evolved bubbles' release. This work can provide new approach to the development of a bifunctional electrocatalyst for overall water splitting.

Achieving Control in Micro-/Nanomotor Mobility.

Unprecedented opportunities exist for the generation of advanced nanotechnologies based on synthetic micro/nanomotors (MNMs), such as active transport of medical agents or the removal of pollutants. In this regard, great efforts have been dedicated toward controlling MNM motion (e.g., speed, directionality). This was generally performed by precise engineering and optimizing of the motors' chassis, engine, powering mode (i.e., chemical or physical), and mechanism of motion. Recently, new insights have emerged to control motors mobility, mainly by the inclusion of different modes that drive propulsion. With high degree of synchronization, these modes work providing the required level of control. In this Minireview, we discuss the diverse factors that impact motion; these include MNM morphology, modes of mobility, and how control over motion was achieved. Moreover, we highlight the main limitations that need to be overcome so that such motion control can be translated into real applications.