Your browser doesn't support javascript.
loading
Mostrar: 20 | 50 | 100
Resultados 1 - 6 de 6
Filtrar
Mais filtros

Base de dados
Tipo de documento
Intervalo de ano de publicação
1.
Nano Lett ; 22(5): 2112-2119, 2022 Mar 09.
Artigo em Inglês | MEDLINE | ID: mdl-35226511

RESUMO

Transition metal dichalcogenide monolayers exhibit ultrahigh surface sensitivity since they expose all atoms to the surface and thereby influence their optoelectronic properties. Here, we report an intriguing lightening of the photoluminescence (PL) from the edge to the interior over time in the WS2 monolayers grown by physical vapor deposition method, with the whole monolayer brightened eventually. Comprehensive optical studies reveal that the PL enhancement arises from the p doping induced by oxygen adsorption. First-principles calculations unveil that the dissociation of chemisorbed oxygen molecule plays a significant role; i.e., the dissociation at one site can largely promote the dissociation at a nearby site, facilitating the photoluminescence lightening. In addition, we further manipulate such PL brightening rate by controlling the oxygen concentration and the temperature. The presented results uncover the extraordinary surface chemistry and related mechanism in WS2 monolayers, which deepens our insight into their unique PL evolution behavior.

2.
Fundam Res ; 2(3): 405-411, 2022 May.
Artigo em Inglês | MEDLINE | ID: mdl-38933404

RESUMO

Understanding the fundamental charge carrier dynamics is of great significance for photodetectors with both high speed and high responsivity. Devices based on two-dimensional (2D) transition metal dichalcogenides can exhibit picosecond photoresponse speed. However, 2D materials naturally have low absorption, and when increasing thickness to gain higher responsivity, the response time usually slows to nanoseconds, limiting their photodetection performance. Here, by taking time-resolved photocurrent measurements, we demonstrated that graphene/MoTe2 van der Waals heterojunctions realize a fast 10 ps photoresponse time owing to the reduced average photocurrent drift time in the heterojunction, which is fundamentally distinct from traditional Dirac semimetal photodetectors such as graphene or Cd3As2 and implies a photodetection bandwidth as wide as 100 GHz. Furthermore, we found that an additional charge carrier transport channel provided by graphene can effectively decrease the photocurrent recombination loss to the entire device, preserving a high responsivity in the near-infrared region. Our study provides a deeper understanding of the ultrafast electrical response in van der Waals heterojunctions and offers a promising approach for the realization of photodetectors with both high responsivity and ultrafast electrical response.

3.
ACS Nano ; 16(3): 4371-4378, 2022 Mar 22.
Artigo em Inglês | MEDLINE | ID: mdl-35191308

RESUMO

Transition metal dichalcogenides (TMDs) have emerged as two-dimensional (2D) building blocks to construct nanoscale light sources. To date, a wide array of TMD-based light-emitting devices (LEDs) have been successfully demonstrated. Yet, their atomically thin and planar nature entails an additional waveguide/microcavity for effective optical routing/confinement. In this sense, integration of TMDs with electronically active photonic nanostructures to form a functional heterojunction is of crucial importance for 2D optoelectronic chips with reduced footprint and higher integration capacity. Here, we report a room-temperature waveguide-integrated light-emitting device based on a p-type monolayer (ML) tungsten diselenide (WSe2) and n-type cadmium sulfide (CdS) nanoribbon (NR) heterojunction diode. The hybrid LED exhibited clear rectification under forward biasing, giving pronounced electroluminescence (EL) at 1.65 eV from exciton resonances in ML WSe2. The integrated EL intensity against the driving current shows a superlinear profile at a high current level, implying a facilitated carrier injection via intervalley scattering. By leveraging CdS NR waveguides, the WSe2 EL can be efficiently coupled and further routed for potential optical interconnect functionalities. Our results manifest the waveguided LEDs as a dual-role module for TMD-based optoelectronic circuitries.

4.
Adv Mater ; 33(27): e2101036, 2021 Jul.
Artigo em Inglês | MEDLINE | ID: mdl-34057257

RESUMO

Multifunctional reconfigurable devices, with higher information capacity, smaller size, and more functions, are urgently needed and draw most attention in frontiers in information technology. 2D semiconductors, ascribing to ultrathin body and easy electrostatic control, show great potential in developing reconfigurable functional units. This work proposes a novel double-gate field-effect transistor architecture with equal top and bottom gate (TG and BG) and realizes flexible optimization of the subthreshold swing (SS) and threshold voltage (VTH ). While the TG and BG are used simultaneously, as a single gate to drive the transistor, ultralow average SS value of 65.5 mV dec-1 can be obtained in a large current range over 104 , enabling the application in high gain inverter. While one gate is used to initialize the channel doping, full logic swing inverter circuit with high noise margin (over 90%) is demonstrated. Such device prototype is further extended for designing reconfigurable logic applications and can be dynamically switched and well maintained between binary and ternary logics. This study provides important concept and device prototype for future multifunctional logic applications.

5.
ACS Nano ; 15(6): 10039-10047, 2021 Jun 22.
Artigo em Inglês | MEDLINE | ID: mdl-34036786

RESUMO

van der Waals (vdW) vertical p-n junctions based on two-dimensional (2D) materials have shown great potential in flexible, self-driven, high-efficiency electronic and optoelectronic applications. However, due to the complex nucleation dynamics, the controllable synthesis of vertical heterostructures remains a daunting challenge. Here, we report the controlled growth of vertical GaSe/MoS2 p-n heterojunctions via a liquid gallium (Ga)-assisted chemical vapor deposition method. The growth mechanism can be interpreted by theoretical calculations based on the Burton-Cabrera-Frank theory. By analyzing the diffusion barriers and the Ehrlich-Schwoebel barriers of adatoms, we found that the growth modes between vertical and lateral can be precisely switched by means of adjusting the amount of Ga. Based on the achieved high-quality vertical GaSe/MoS2 p-n heterojunctions, photosensing devices are further designed and systematically investigated. Upon light illumination, prominent photovoltaic effects with large open-circuit voltage (0.61 V) and broadband detection capability from 375 to 633 nm are observed, which can further be employed for self-powered photodetection with high responsivity (900 mA/W) and fast response speed (5 ms). The developed liquid-metal-assisted strategy provides an effective method for controllable synthesis of vdW heterostructures and will give impetus to their applications in high-performance optoelectronic device.

6.
Research (Wash D C) ; 2020: 5464258, 2020.
Artigo em Inglês | MEDLINE | ID: mdl-33029588

RESUMO

The development of optoelectronic devices requires breakthroughs in new material systems and novel device mechanisms, and the demand recently changes from the detection of signal intensity and responsivity to the exploration of sensitivity of polarized state information. Two-dimensional (2D) materials are a rich family exhibiting diverse physical and electronic properties for polarization device applications, including anisotropic materials, valleytronic materials, and other hybrid heterostructures. In this review, we first review the polarized-light-dependent physical mechanism in 2D materials, then present detailed descriptions in optical and optoelectronic properties, involving Raman shift, optical absorption, and light emission and functional optoelectronic devices. Finally, a comment is made on future developments and challenges. The plethora of 2D materials and their heterostructures offers the promise of polarization-dependent scientific discovery and optoelectronic device application.

SELEÇÃO DE REFERÊNCIAS
Detalhe da pesquisa