High-Entropy Polymer Electrolytes Derived from Multivalent Polymeric Ligands for Solid-State Lithium Metal Batteries with Accelerated Li+ Transport.

Solid-state polymer-based electrolytes (SSPEs) exhibit great possibilities in realizing high-energy-density solid-state lithium metal batteries (SSLMBs). However, current SSPEs suffer from low ionic conductivity and unsatisfactory interfacial compatibility with metallic Li because of the high crystallinity of polymers and sluggish Li+ movement in SSPEs. Herein, differing from common strategies of copolymerization, a new strategy of constructing a high-entropy SSPE from multivariant polymeric ligands is proposed. As a protocol, poly(vinylidene fluoride-co-hexafluoropropylene) (PH) chains are grafted to the demoed polyethylene imine (PEI) with abundant -NH2 groups via a click-like reaction (HE-PEIgPHE). Compared to a PH-based SSPE, our HE-PEIgPHE shows a higher modulus (6.75 vs 5.18 MPa), a higher ionic conductivity (2.14 × 10-4 vs 1.03 × 10-4 S cm-1), and a higher Li+ transference number (0.55 vs 0.42). A Li|HE-PEIgPHE|Li cell exhibits a long lifetime (1500 h), and a Li|HE-PEIgPHE|LiFePO4 cell delivers an initial capacity of 160 mAh g-1 and a capacity retention of 98.7%, demonstrating the potential of our HE-PEIgPHE for the SSLMBs.

Superior Li+ Kinetics by "Low-Activity-Solvent" Engineering for Stable Lithium Metal Batteries.

The structure of solvated Li+ has a significant influence on the electrolyte/electrode interphase (EEI) components and desolvation energy barrier, which are two key factors in determining the Li+ diffusion kinetics in lithium metal batteries. Herein, the "solvent activity" concept is proposed to quantitatively describe the correlation between the electrolyte elements and the structure of solvated Li+. Through fitting the correlation of the electrode potential and solvent concentration, we suggest a "low-activity-solvent" electrolyte (LASE) system for deriving a stable inorganic-rich EEI. Nano LiF particles, as a model, were used to capture free solvent molecules for the formation of a LASE system. This advanced LASE not only exhibits outstanding antidendrite growth behavior but also delivers an impressive performance in Li/LiNi0.8Co0.1Mn0.1O2 cells (a capacity of 169 mAh g-1 after 250 cycles at 0.5 C).

Electrolyte Design with Dual -C≡N Groups Containing Additives to Enable High-Voltage Na3V2(PO4)2F3-Based Sodium-Ion Batteries.

Na3V2(PO4)2F3 is recognized as a promising cathode for high energy density sodium-ion batteries due to its high average potential of ∼3.95 V (vs Na/Na+). A high-voltage-resistant electrolyte is of high importance due to the long duration of 4.2 V (vs Na/Na+) when improving cyclability. Herein, a targeted electrolyte containing additives with two -C≡N groups like succinonitrile has been designed. In this design, one -C≡N group is accessible to the solvation sheath and enables the other -C≡N in dinitrile being exposed and subsequently squeezed into the electric double layer. Then, the squeezed -C≡N group is prone to a preferential adsorption on the electrode surface prior to the exposed -CH2/-CH3 in Na+-solvent and oxidized to construct a stable and electrically insulating interface enriched CN-/NCO-/Na3N. The Na3V2(PO4)2F3-based sodium-ion batteries within a high-voltage of 2-4.3 V (vs Na/Na+) can accordingly achieve an excellent cycling stability (e.g., 95.07% reversible capacity at 1 C for 1,5-dicyanopentane and 98.4% at 2 C and 93.0% reversible capacity at 5 C for succinonitrile after 1000 cycles). This work proposes a new way to design high-voltage electrolytes for high energy density sodium-ion batteries.

Interfacial Modulation of a Self-Sacrificial Synthesized SnO2@Sn Core-Shell Heterostructure Anode toward High-Capacity Reversible Li+ Storage.

Sn-based anodes are promising high-capacity anode materials for low-cost lithium ion batteries. Unfortunately, their development is generally restricted by rapid capacity fading resulting from large volume expansion and the corresponding structural failure of the solid electrolyte interphase (SEI) during the lithiation/delithiation process. Herein, heterostructural core-shell SnO2-layer-wrapped Sn nanoparticles embedded in a porous conductive nitrogen-doped carbon (SOWSH@PCNC) are proposed. In this design, the self-sacrificial Zn template from the precursors is used as the pore former, and the LiF-Li3N-rich SEI modulation layer is motivated to average uniform Li+ flux against local excessive lithiation. Meanwhile, both the chemically active nitrogen sites and the heterojunction interfaces within SnO2@Sn are implanted as electronic/ionic promoters to facilitate fast reaction kinetics. Consequently, the as-converted SOWSH@PCNC electrodes demonstrate a significantly boosted Li+ capacity of 961 mA h g-1 at 200 mA g-1 and excellent cycling stability with a low capacity decaying rate of 0.071% after 400 cycles at 500 mA g-1, suggesting their great promise as an anode material in high-performance lithium ion batteries.

Lithium Atom Surface Diffusion and Delocalized Deposition Propelled by Atomic Metal Catalyst toward Ultrahigh-Capacity Dendrite-Free Lithium Anode.

Lithium metal anode possesses overwhelming capacity and low potential but suffers from dendrite growth and pulverization, causing short lifespan and low utilization. Here, a fundamental novel insight of using single-atomic catalyst (SAC) activators to boost lithium atom diffusion is proposed to realize delocalized deposition. By combining electronic microscopies, time-of-flight secondary ion mass spectrometry, theoretical simulations, and electrochemical analyses, we have unambiguously depicted that the SACs serve as kinetic activators in propelling the surface spreading and lateral redistribution of the lithium atoms for achieving dendrite-free plating morphology. Under the impressive capacity of 20 mA h cm-2, the Li modified with SAC-activator exhibits a low overpotential of ∼50 mV at 5 mA cm-2, a long lifespan of 900 h, and high Coulombic efficiencies during 150 cycles, much better than most literature reports. The so-coupled lithium-sulfur full battery delivers high cycling and rate performances, showing great promise toward the next-generation lithium metal batteries.

Delocalized Isoelectronic Heterostructured FeCoOx Sy Catalysts with Tunable Electron Density for Accelerated Sulfur Redox Kinetics in Li-S batteries.

High interconversion energy barriers, depressive reaction kinetics of sulfur species, and sluggish Li+ transport inhibit the wide development of high-energy-density lithium sulfur (Li-S) batteries. Herein, differing from random mixture of selected catalysts, the composite catalyst with outer delocalized isoelectronic heterostructure (DIHC) is proposed and optimized, enhancing the catalytic efficiency for decreasing related energy barriers. As a proof-of-content, the FeCoOx Sy composites with different degrees of sulfurization are fabricated by regulating atoms ratio between O and S. The relationship of catalytic efficiency and principal mechanism in DIHCs are deeply understood from electrochemical experiments to in situ/operando spectral spectroscopies i.e., Raman, XRD and UV/Vis. Consequently, the polysulfide conversion and Li2 S precipitation/dissolution experiments strongly demonstrate the volcano-like catalytic efficiency of various DIHCs. Furthermore, the FeCoOx Sy -decorated cell delivers the high performance (1413 mAh g-1 at 0.1 A g-1 ). Under the low electrolyte/sulfur ratio, the high loading cell stabilizes the areal capacity of 6.67 mAh cm-2 at 0.2 A g-1 . Impressively, even resting for about 17 days for possible polysulfide shuttling, the high-mass-loading FeCoOx Sy -decorated cell stabilizes the same capacity, showing the practical application of the DIHCs in improving catalytic efficiency and reaching high electrochemical performance.

Oxygen Vacancy-Mediated Selective C-N Coupling toward Electrocatalytic Urea Synthesis.

The electrocatalytic C-N coupling for one-step urea synthesis under ambient conditions serves as the promising alternative to the traditional urea synthetic protocol. However, the hydrogenation of intermediate species hinders the efficient urea synthesis. Herein, the oxygen vacancy-enriched CeO2 was demonstrated as the efficient electrocatalyst with the stabilization of the crucial intermediate of *NO via inserting into vacant sites, which is conducive to the subsequent C-N coupling process rather than protonation, whereas the poor selectivity of C-N coupling with protonation was observed on the vacancy-deficient catalyst. The oxygen vacancy-mediated selective C-N coupling was distinguished and validated by the in situ sum frequency generation spectroscopy. The introduction of oxygen vacancies tailors the common catalyst carrier into an efficient electrocatalyst with a high urea yield rate of 943.6 mg h-1 g-1, superior than that of partial noble-metal-based electrocatalysts. This work provides novel insights into the catalyst design and developments of coupling systems.

Long-Life Dendrite-Free Lithium Metal Electrode Achieved by Constructing a Single Metal Atom Anchored in a Diffusion Modulator Layer.

Lithium metal electrodes have shown great promise for high capacity and the lowest potential. However, wide application is restricted by uncontrollable plating/stripping lithium behaviors, an uneven solid electrolyte interphase, and a lithium dendrite. Herein, the highly active single metal atom anchored in vacant catalyst is synthesized on the hierarchical porous nanocarbon (SACo/ADFS@HPSC). Acting as an artificial protective modulation layer on the lithium surface, the numerous atomic sites show the superiority in modulating lithium ion behaviors and smoothing the lithium surface without dendrite growth. As a consequence, the SACo/ADFS@HPSC-modified Li electrode lowers nucleation barrier (15 mV), extends the smooth plating lifespan (1600 h), and improves Coulombic efficiency, significantly accelerating the horizonal deposition of plated lithium. Coupled with a sulfur cathode, the fabricated pouch cell with 5.4 mg cm-2 delivers a high capacity of 3.78 mA h cm-2 corresponding to 1505 Wh kg-1, showing the promising practical application.

Low Roll-Off and High Stable Electroluminescence in Three-Dimensional FAPbI3 Perovskites with Bifunctional-Molecule Additives.

Three-dimensional (3D) perovskites have been demonstrated as an effective strategy to achieve efficient light-emitting diodes (LEDs) at high brightness. However, most 3D perovskite LEDs still suffer from serious efficiency roll-off. Here, using FAPbI3 as a model system, we find that the main reason for efficiency droop and degradation in 3D perovskite LEDs is defects and the ion migration under electrical stress. By introducing bifunctional-molecule 3-chlorobenzylamine additive into the perovskite precursor solution, the detrimental effects can be significantly suppressed through the growth of high crystalline perovskites and defect passivation. This approach leads to bright near-infrared perovskite LEDs with a peak external quantum efficiency of 16.6%, which sustains 80% of its peak value at a high current density of 460 mA cm-2, corresponding to a high brightness of 300 W sr-1 m-2. Moreover, the device exhibits a record half-lifetime of 49 h under a constant current density of 100 mA cm-2.

An Ion-In-Conjugation-Boosted Organic Semiconductor Gas Sensor Operating at High Temperature and Immune to Moisture.

Organic electrical gas sensors have been developed for many decades because of their high sensitivity and selectivity. However, their industrialization is severely hindered by their intrinsic humidity susceptibility and poor recovery. Conventional organic sensory materials can only operate at room temperature owing to their weak intermolecular interactions. Herein, we demonstrate using a croconate polymer (poly-4,4'-biphenylcroconate) that the "ion-in-conjugation" concept enables organic gas sensors to operate at 100 °C and 70 % relative humidity with almost complete recovery. The fabricated sensor had a parts-per-billion (ppb) detection limit for NO2 and showed the highest sensitivity (2526 ppm-1 at 40 ppb) of all reported NO2 chemiresistive sensors. Furthermore, charge transfer increased with temperature. Theoretical calculations and in situ FTIR spectra confirmed the ion-in-conjugation-inspired hydrogen bond as key for excellent sensitivity. A NO2 alarm system was assembled to demonstrate the feasibility of this sensor.

Electrochemical Oxidation of 5-Hydroxymethylfurfural on Nickel Nitride/Carbon Nanosheets: Reaction Pathway Determined by In Situ Sum Frequency Generation Vibrational Spectroscopy.

2,5-Furandicarboxylic acid was obtained from the electrooxidation of 5-hydroxymethylfurfural (HMF) with non-noble metal-based catalysts. Moreover, combining the biomass oxidation with the hydrogen evolution reaction (HER) increased the energy conversion efficiency of an electrolyzer and also generated value-added products at both electrodes. Here, the reaction pathway on the surface of a carbon-coupled nickel nitride nanosheet (Ni3 N@C) electrode was evaluated by surface-selective vibrational spectroscopy using sum frequency generation (SFG) during the electrochemical oxidation. The Ni3 N@C electrode shows catalytic activities for HMF oxidation and the HER. As the first in situ SFG study on transition-metal nitride for the electrooxidation upgrade of HMF, this work not only demonstrates that the reaction pathway of electrochemical oxidation but also provides an opportunity for nonprecious metal nitrides to simultaneously upgrade biomass and produce H2 under ambient conditions.

915 nm Light-Triggered Photodynamic Therapy and MR/CT Dual-Modal Imaging of Tumor Based on the Nonstoichiometric Na0.52 YbF3.52 :Er Upconversion Nanoprobes.

Lanthanide (Ln(3+) )-doped upconversion nanoparticles (UCNPs) as a new generation of multimodal bioprobes have attracted great interest for theranostic purpose. Herein, red emitting nonstoichiometric Na0.52 YbF3.52 :Er UCNPs of high luminescence intensity and color purity are synthesized via a facile solvothermal method. The red UC emission from the present nanophosphors is three times more intense than the well-known green emission from the ≈30 nm sized hexagonal-phase NaYF4 :Yb,Er UCNPs. By utilizing Na0.52 YbF3.52 :Er@SrF2 UCNPs as multifunctional nanoplatforms, highly efficient in vitro and in vivo 915 nm light-triggered photodynamic therapies are realized for the first time, with dramatically diminished overheating yet similar therapeutic effects in comparison to those triggered by 980 nm light. Moreover, by virtue of the high transverse relaxivity (r 2 ) and the strong X-ray attenuation ability of Yb(3+) ions, these UCNPs also demonstrate good performances as contrast agents for high contrast magnetic resonance and X-ray computed tomography dual-modal imaging. Our research shows the great potential of the red emitting Na0.52 YbF3.52 :Er UCNPs for multimodal imaging-guided photodynamic therapy of tumors.

Synthesis, Crystal Structure, and Electrochemical Properties of a Simple Magnesium Electrolyte for Magnesium/Sulfur Batteries.

Most simple magnesium salts tend to passivate the Mg metal surface too quickly to function as electrolytes for Mg batteries. In the present work, an electroactive salt [Mg(THF)6 ][AlCl4 ]2 was synthesized and structurally characterized. The Mg electrolyte based on this simple mononuclear salt showed a high Mg cycling efficiency, good anodic stability (2.5 V vs. Mg), and high ionic conductivity (8.5 mS cm(-1) ). Magnesium/sulfur cells employing the as-prepared electrolyte exhibited good cycling performance over 20 cycles in the range of 0.3-2.6 V, thus indicating an electrochemically reversible conversion of S to MgS without severe passivation of the Mg metal electrode surface.

Constructing an Anion-Braking Separator to Regulate Local Li+ Solvation Structure for Stabilizing Lithium Metal Batteries.

Lithium metal batteries (LMBs) offer significant advantages in energy density and output voltage, but they are severely limited by uncontrollable Li dendrite formation resulting from uneven Li+ behaviors and high reactivity with potential co-solvent plating. Herein, to uniformly enhance the Li behaviors in desolvation and diffusion, the local Li+ solvation shell structure is optimized by constructing an anion-braking separator, hence dynamically reducing the self-amplifying behavior of dendrites. As a prototypal, two-dimensional lithiated-montmorillonite (LiMMT) is blade-coated on the commercial separator, where abundant -OH groups as Lewis acidic sites and electron acceptors could selectively adsorb corresponding FSI- anions, regulating the solvation shell structure and restricting their migration. Meanwhile, the weakened anion mobility delays the time of breaking electrical neutrality, and the Li nucleation density is quantified through the respective experimental, theoretical and spectroscopical results, providing a comprehensive understanding of modifying anion and cation behaviors on dendritic growth suppression. As anticipated, a long Li plating/stripping lifespan up to 1800 h and a significantly increased average Coulombic efficiency of 98.8% are achieved under 3.0 mAh cm-2. The fabricated high-loading Li-LFP or Li-NCM523 full-cells display the cycle durability with enhanced capacity retention of nearly 100%, providing the instructive guide towards realizing dendrite-free LMBs.

Atom-Level Tandem Catalysis in Lithium Metal Batteries.

High-energy-density lithium metal batteries (LMBs) are limited by reaction or diffusion barriers with dissatisfactory electrochemical kinetics. Typical conversion-type lithium sulfur battery systems exemplify the kinetic challenges. Namely, before diffusing or reacting in the electrode surface/interior, the Li(solvent)x + dissociation at the interface to produce isolated Li+, is usually a prerequisite fundamental step either for successive Li+ "reduction" or for Li+ to participate in the sulfur conversions, contributing to the related electrochemical barriers. Thanks to the ideal atomic efficiency (100 at%), single atom catalysts (SACs) have gained attention for use in LMBs toward resolving the issues caused by the five types of barrier-restricted processes, including polysulfide/Li2S conversions, Li(solvent)x + desolvation, and Li0 nucleation/diffusion. In this perspective, the tandem reactions including desolvation and reaction or plating and corresponding catalysis behaviors are introduced and analyzed from interface to electrode interior. Meanwhile, the principal mechanisms of highly efficient SACs in overcoming specific energy barriers to reinforce the catalytic electrochemistry are discussed. Lastly, the future development of high-efficiency atomic-level catalysts in batteries is presented.

Superfast Zincophilic Ion Conductor Enables Rapid Interfacial Desolvation Kinetics for Low-Temperature Zinc Metal Batteries.

Low-temperature rechargeable aqueous zinc metal batteries (AZMBs) as highly promising candidates for energy storage are largely hindered by huge desolvation energy barriers and depressive Zn2+ migration kinetics. In this work, a superfast zincophilic ion conductor of layered zinc silicate nanosheet (LZS) is constructed on a metallic Zn surface, as an artificial layer and ion diffusion accelerator. The experimental and simulation results reveal the zincophilic ability and layer structure of LZS not only promote the desolvation kinetics of [Zn(H2O)6]2+ but also accelerate the Zn2+ transport kinetics across the anode/electrolyte interface, guiding uniform Zn deposition. Benefiting from these features, the LZS-modified Zn anodes showcase long-time stability (over 3300 h) and high Coulombic efficiency with ≈99.8% at 2 mA cm-2, respectively. Even reducing the environment temperature down to 0 °C, ultralong cycling stability up to 3600 h and a distinguished rate performance are realized. Consequently, the assembled Zn@LZS//V2O5-x full cells deliver superior cyclic stability (344.5 mAh g-1 after 200 cycles at 1 A g-1) and rate capability (285.3 mAh g-1 at 10 A g-1) together with a low self-discharge rate, highlighting the bright future of low-temperature AZMBs.

Ordered Mesoporous Carbon Grafted MXene Catalytic Heterostructure as Li-Ion Kinetic Pump toward High-Efficient Sulfur/Sulfide Conversions for Li-S Battery.

Lithium-sulfur (Li-S) batteries exhibit unparalleled theoretical capacity and energy density than conventional lithium ion batteries, but they are hindered by the dissatisfactory "shuttle effect" and the sluggish conversion kinetics owing to the low lithium ion transport kinetics, resulting in rapid capacity fading. Herein, a catalytic two-dimensional heterostructure composite is prepared by evenly grafting mesoporous carbon on the MXene nanosheet (denoted as OMC-g-MXene), serving as interfacial kinetic accelerators in Li-S batteries. In this design, the grafted mesoporous carbon in the heterostructure can not only prevent the stack of MXene nanosheets with the enhanced mechanical property but also offer a facilitated pump for accelerating ion diffusion. Meanwhile, the exposed defect-rich OMC-g-MXene heterostructure inhibits the polysulfide shuttling with chemical interactions between OMC-g-MXene and polysulfides and thus simultaneously enhances the electrochemical conversion kinetics and efficiency, as fully investigated by in situ/ex situ characterizations. Consequently, the cells with OMC-g-MXene ion pumps achieve a high cycling capacity (966 mAh g-1 at 0.2 C after 200 cycles), a superior rate performance (537 mAh g-1 at 5 C), and an ultralow decaying rate of 0.047% per cycle after 800 cycles at 1 C. Even employed with a high sulfur loading of 7.08 mg cm-2 under lean electrolyte, an ultrahigh areal capacity of 4.5 mAh cm-2 is acquired, demonstrating a future practical application.

Interfacial "Single-Atom-in-Defects" Catalysts Accelerating Li+ Desolvation Kinetics for Long-Lifespan Lithium-Metal Batteries.

The lithium-metal anode is a promising candidate for realizing high-energy-density batteries owing to its high capacity and low potential. However, several rate-limiting kinetic obstacles, such as the desolvation of Li+ solvation structure to liberate Li+ , Li0 nucleation, and atom diffusion, cause heterogeneous spatial Li-ion distribution and fractal plating morphology with dendrite formation, leading to low Coulombic efficiency and depressive electrochemical stability. Herein, differing from pore sieving effect or electrolyte engineering, atomic iron anchors to cation vacancy-rich Co1- x S embedded in 3D porous carbon (SAFe/CVRCS@3DPC) is proposed and demonstrated as catalytic kinetic promoters. Numerous free Li ions are electrocatalytically dissociated from the Li+ solvation complex structure for uniform lateral diffusion by reducing desolvation and diffusion barriers via SAFe/CVRCS@3DPC, realizing smooth dendrite-free Li morphologies, as comprehensively understood by combined in situ/ex situ characterizations. Encouraged by SAFe/CVRCS@3DPC catalytic promotor, the modified Li-metal anodes achieve smooth plating with a long lifespan (1600 h) and high Coulombic efficiency without any dendrite formation. Paired with the LiFePO4 cathode, the full cell (10.7 mg cm-2 ) stabilizes a capacity retention of 90.3% after 300 cycles at 0.5 C, signifying the feasibility of using interfacial catalysts for modulating Li behaviors toward practical applications.

Halide Perovskite glues activate two-dimensional covalent organic framework crystallites for selective NO2 sensing.

Two-dimensional covalent organic frameworks (2D COFs) are promising for gas sensing owing to the large surface area, abundant active sites, and their semiconducting nature. However, 2D COFs are usually produced in the form of insoluble micro-crystallites. Their poor contacts between grain boundaries severely suppress the conductivity, which are too low for chemresistive gas sensing. Here, we demonstrate that halide perovskites can be employed as electric glues to bond 2D COF crystallites to improve their conductivity by two orders of magnitude, activating them to detect NO2 with high selectivity and sensitivity. Resonant microcantilever, grand canonical Monte Carlo, density functional theory and sum-frequency generation analyses prove that 2D COFs can enrich and transfer electrons to NO2 molecules, leading to increased device conductivity. This work provides a facile approach for improving the conductivity of polycrystalline 2D COF films and may expand their applications in semiconductor devices, such as sensors, resistors, memristors and field-emission transistors.

Photoinduced diffraction grating in hybrid artificial molecule.

Photoinduced diffraction grating is theoretically investigated in a three-level ladder-type hybrid artificial molecule comprised of a semiconductor quantum dot (SQD) and a metal nanoparticle (MNP). The SQD and the MNP are coupled via the Coulomb interaction. The probe absorption vanishes under the action of a strong coupling field, indicating an effect of electromagnetically induced transparency (EIT). Based on this EIT effect, diffraction grating is achievable when a standing-wave coupling field is applied. It turns out that the efficiency of diffraction grating is greatly improved due to the existence of the MNP. Furthermore, the diffraction efficiency can be controlled by tuning the interaction strength between the SQD and the MNP. Nearly pure phase grating is obtained, showing high transmissivity and high diffraction efficiency up to 33%.