RESUMO
A low-profile dual-band pixelated defected ground antenna has been proposed at 3.5 GHz and 5.8 GHz bands. This work presents a flexible design guide for achieving single-band and dual-band antenna using pixelated defected ground (PDG). The unique pixelated defected ground has been designed using the binary particle swarm optimization (BPSO) algorithm. Computer Simulation Technology Microwave Studio incorporated with Matlab has been utilized in the antenna design process. The PDG configuration provides freedom of exploration to achieve the desired antenna performance. Compact antenna design can be achieved by making the best use of designated design space on the defected ground (DG) plane. Further, a V-shaped transfer function based on BPSO with fast convergence allows us to efficiently implement the PDG technique. In the design procedure, pixelization is applied to a small rectangular region of the ground plane. The square pixels on the designated defected ground area of the antenna have been formed using a binary bit string, consisting of 512 bits taken during each iteration of the algorithm. The PDG method is concerned with the shape of the DG and does not rely on the geometrical dimension analysis used in traditional defected ground antennas. Initially, three single band antennas have been designed at 3.5 GHz, 5.2 GHz and 5.8 GHz using PDG technique. Finally, same PDG area has been used to design a dual-band antenna at 3.5 GHz and 5.8 GHz. The proposed antenna exhibits almost omnidirectional radiation performance with nearly 90% efficiency. It also shows dual radiation pattern property with similar patterns having different polarizations at each operational band. The antenna is fabricated on a ROGERS RO4003 substrate with 1.52 mm thickness. Reflection coefficient and radiation patterns are measured to validate its performance. The simulated and measured results of the antenna are closely correlated. The proposed antenna is suitable for different applications in Internet of Things.
RESUMO
Continuous and accurate sensing of water content in soil is an essential and useful measure in the agriculture industry. Traditional sensors developed to perform this task suffer from limited lifetime and also need to be calibrated regularly. Further, maintenance, support, and deployment of these sensors in remote environments provide additional challenges to the use of conventional soil moisture sensors. In this paper, a metamaterial perfect absorber (MPA) based soil moisture sensor is introduced. The ability of MPAs to absorb electromagnetic signals with near 100% efficiency facilitates the design of highly accurate and low-profile radio frequency passive sensors. MPA based sensor can be fabricated from highly durable materials and can therefore be made more resilient than traditional sensors. High resolution sensing is achieved through the creation of physical channels in the substrate integrated waveguide (SIW) cavity. The proposed sensor does not require connection for both electromagnetic signals or for adding a testing sample. Importantly, an external power supply is not needed, making the MPA based sensor the perfect solution for remote and passive sensing in modern agriculture. The proposed MPA based sensor has three absorption bands due to the various resonance modes of the SIW cavity. By changing the soil moisture level, the absorption peak shifts by 10 MHz, 23.3 MHz, and 60 MHz, which is correlated with the water content percentage at the first, second and third absorption bands, respectively. Finally, a [Formula: see text] cell array with a total size of [Formula: see text] has been fabricated and tested. A strong correlation between measurement and simulation results validates the design procedure.
RESUMO
Being incident and polarization angle insensitive are crucial characteristics of metamaterial perfect absorbers due to the variety of incident signals. In the case of incident angles insensitivity, facing transverse electric (TE) and transverse magnetic (TM) waves affect the absorption ratio significantly. In this scientific report, a crescent shape resonator has been introduced that provides over 99% absorption ratio for all polarization angles, as well as 70% and 93% efficiencies for different incident angles up to [Formula: see text] for TE and TM polarized waves, respectively. Moreover, the insensitivity for TE and TM modes can be adjusted due to the semi-symmetric structure. By adjusting the structure parameters, the absorption ratio for TE and TM waves at [Formula: see text] has been increased to 83% and 97%, respectively. This structure has been designed to operate at 5 GHz spectrum to absorb undesired signals generated due to the growing adoption of Wi-Fi networks. Finally, the proposed absorber has been fabricated in a [Formula: see text] array structure on FR-4 substrate. Strong correlation between measurement and simulation results validates the design procedure.