A TeZla micromixer for interrogating the early and broad folding landscape of G-quadruplex via multistage velocity descending.

Biomacromolecular folding kinetics involves fast folding events and broad timescales. Current techniques face limitations in either the required time resolution or the observation window. In this study, we developed the TeZla micromixer, integrating Tesla and Zigzag microstructures with a multistage velocity descending strategy. TeZla achieves a significant short mixing dead time (40 µs) and a wide time window covering four orders of magnitude (up to 300 ms). Using this unique micromixer, we explored the folding landscape of c-Myc G4 and its noncanonical-G4 derivatives with different loop lengths or G-vacancy sites. Our findings revealed that c-Myc can bypass folding intermediates and directly adopt a G4 structure in the cation-deficient buffer. Moreover, we found that the loop length and specific G-vacancy site could affect the folding pathway and significantly slow down the folding rates. These results were also cross-validated with real-time NMR and circular dichroism. In conclusion, TeZla represents a versatile tool for studying biomolecular folding kinetics, and our findings may ultimately contribute to the design of drugs targeting G4 structures.

Centrifugo-Pneumatic Reciprocating Flowing Coupled with a Spatial Confinement Strategy for an Ultrafast Multiplexed Immunoassay.

Immunoassays serve as powerful diagnostic tools for early disease screening, process monitoring, and precision treatment. However, the current methods are limited by high costs, prolonged processing times (>2 h), and operational complexities that hinder their widespread application in point-of-care testing. Here, we propose a novel centrifugo-pneumatic reciprocating flowing coupled with spatial confinement strategy, termed PRCM, for ultrafast multiplexed immunoassay of pathogens on a centrifugal microfluidic platform. Each chip consists of four replicated units; each unit allows simultaneous detection of three targets, thereby facilitating high-throughput parallel analysis of multiple targets. The PRCM platform enables sequential execution of critical steps such as solution mixing, reaction, and drainage by coordinating inherent parameters, including motor rotation speed, rotation direction, and acceleration/deceleration. By integrating centrifugal-mediated pneumatic reciprocating flow with spatial confinement strategies, we significantly reduce the duration of immune binding from 30 to 5 min, enabling completion of the entire testing process within 20 min. As proof of concept, we conducted a simultaneous comparative test on- and off-the-microfluidics using 12 negative and positive clinical samples. The outcomes yielded 100% accuracy in detecting the presence or absence of the SARS-CoV-2 virus, thus highlighting the potential of our PRCM system for multiplexed point-of-care immunoassays.

Fully Integrated and High-Throughput Microfluidic System for Multiplexed Point-Of-Care Testing.

For every epidemic outbreak, the prevention and treatments in resource-limited areas are always out of reach. Critical to this is that high accuracy, stability, and more comprehensive analytical techniques always rely on expensive and bulky instruments and large laboratories. Here, a fully integrated and high-throughput microfluidic system is proposed for ultra-multiple point-of-care immunoassay, termed Dac system. Specifically, the Dac system only requires a handheld portable device to automatically recycle repetitive multi-step reactions including on-demand liquid releasing, dispensing, metering, collecting, oscillatory mixing, and discharging. The Dac system performs high-precision enzyme-linked immunosorbent assays for up to 17 samples or targets simultaneously on a single chip. Furthermore, reagent consumption is only 2% compared to conventional ELISA, and microbubble-accelerated reactions shorten the assay time by more than half. As a proof of concept, the multiplexed detections are achieved by detecting at least four infection targets for two samples simultaneously on a singular chip. Furthermore, the barcode-based multi-target results can rapidly distinguish between five similar cases, allowing for accurate therapeutic interventions. Compared to bulky clinical instruments, the accuracy of clinical inflammation classification is 92.38% (n = 105), with a quantitative correlation coefficient of R2 = 0.9838, while the clinical specificity is 100% and the sensitivity is 98.93%.

All-in-one detection of breast cancer-derived exosomal miRNA on a pen-based paper chip.

Exosomal microRNAs (miRNAs) play a pivotal role in intercellular communication, regulating gene expression in target cells, and hold significant promise as cancer biomarkers for early detection and screening. However, achieving precise and viable detection of exosomal miRNAs remains a challenge. This paper proposes an all-in-one detection strategy for breast cancer-derived exosomal miRNA-21 on a pen-based paper chip (PPC). The PPC is constructed using a modified automatic pen and lateral flow assay (LFA), which results in a cost-effective fabrication process. The user only needs to add the sample and trigger the top of the self-contained PPC after a period of time to complete the entire detection process. To enhance the sensitivity of exosomal miRNA testing, an enzyme-free catalyzed hairpin assembly (CHA) is further introduced, enabling highly sensitive detection of miRNA-21 with a limit of detection (LOD) of 25 fmol. Additionally, the detection of miRNAs in differentially-expressed cells and clinical samples has also been successfully achieved with high specificity. Overall, the proposed PPC provides an effective tool for detecting early cancer, monitoring diseases, and establishing point of care testing (POCT).

On-Line Dual-Active Valves Based Centrifugal Microfluidic Chip for Fully Automated Point-of-Care Immunoassay.

There remains an unmet need for a fully integrated microfluidic platform that can automatically perform multistep and multireagent immunoassays. Here, we proposed a novel online dual-active valve-based centrifugal microfluidic chip, termed DAVM, for fully automatic point-of-care immunoassay. Practically, the puncture valve, one of the dual active valves, is capable of achieving precise, on-demand, sequential release of prestored reagents, while the other valve-reversible active valve enables controlled retention and drainage of the reaction solutions. Thereby, our technology mitigates the challenges of hydrophilic/hydrophobic modifications and unstable valve control performance commonly observed in passive valve controls. As a proof of concept, the indirect enzymatic immunoblotting technique was employed on DAVM for fully automated immunological analysis of eight targets, yielding outcomes within an hour. Furthermore, we conducted a comparative analysis of 28 clinical samples with autoimmune diseases. According to 224 clinical data, the sample testing concordance rate between DAVM and the traditional instrument was 82%, with a target compliance rate of 97%. Therefore, our DAVM system has powerful potential for fully automated immunoassays.

Handyfuge Microfluidic for On-Site Antibiotic Susceptibility Testing.

Low-cost, rapid, and accurate acquisition of minimum inhibitory concentrations (MICs) is key to limiting the development of antimicrobial resistance (AMR). Until now, conventional antibiotic susceptibility testing (AST) methods are typically time-consuming, high-cost, and labor-intensive, making them difficult to accomplish this task. Herein, an electricity-free, portable, and robust handyfuge microfluidic chip was developed for on-site AST, termed handyfuge-AST. With simply handheld centrifugation, the bacterial-antibiotic mixtures with accurate antibiotic concentration gradients could be generated in less than 5 min. The accurate MIC values of single antibiotics (including ampicillin, kanamycin, and chloramphenicol) or their combinations against Escherichia coli could be obtained within 5 h. To further meet the growing demands of point-of-care testing, we upgraded our handyfuge-AST with a pH-based colorimetric strategy, enabling naked eye recognition or intelligent recognition with a homemade mobile app. Through a comparative study of 60 clinical data (10 clinical samples corresponding to six commonly used antibiotics), the accurate MICs by handyfuge-AST with 100% categorical agreements were achieved compared to clinical standard methods (area under curves, AUCs = 1.00). The handyfuge-AST could be used as a low-cost, portable, and robust point-of-care device to rapidly obtain accurate MIC values, which significantly limit the progress of AMR.

Programmable Gravity Self-Driven Microfluidic Chip for Point-of-Care Multiplied Immunoassays.

Point-of-care testing (POCT) is experiencing a groundbreaking transformation with microfluidic chips, which offer precise fluid control and manipulation at the microscale. Nevertheless, chip design or operation for existing platforms is rather cumbersome, with some even heavily depending on external drivers or devices, impeding their broader utilization. This study develops a unique programmable gravity self-driven microfluidic chip (PGSMC) capable of simultaneous multi-reagent sequential release, multi-target analysis, and multi-chip operation. All necessary reagents are introduced in a single step, and the process is initiated simply by flipping the PGSMC vertically, eliminating the need for additional steps or devices. Additionally, it demonstrates successful immunoassays in less than 60 min for antinuclear antibodies testing, compared to more than 120 min by traditional methods. Assessment using 25 clinically diagnosed cases showcases remarkable sensitivity (96%), specificity (100%), and accuracy (99%). These outcomes underscored its potential as a promising platform for POCT with high accuracy, speed, and reliability, highlighting its capability for automated fluid control.

On-chip-angiogenesis based on a high-throughput biomimetic three-dimensional cell spheroid culture system.

Angiogenesis is one of the most essential developmental processes and plays a key role in organogenesis and tumorigenesis in which epithelial cells proliferate and migrate, thus resulting in sprouting and extension of the existing vasculature. The study of angiogenesis in vivo is limited by difficulties related to imaging of the fine structure of vascular sprouting within non-transparent bulk tissue. Thus, many model systems have been proposed in recent years. However, to meet the urgent need for high-throughput studies and screening, further improvements are still required, particularly in terms of scaling-up. In this study, we combined microchip fabrication with the culture of three-dimensional (3D) spheroids, thus providing a platform for 3D multilayer angiogenesis-on-a-chip. Using this platform, we investigated the precise effects of vascular endothelial growth factor (VEGF) on angiogenesis. In comparison with two-dimensional (2D) angiogenesis assays, our 3D angiogenesis platform demonstrated superior sprouting and provided proof of concept that our 3D biomimetic angiogenesis-on-a-chip could serve as a powerful tool for pro- or anti-angiogenesis candidate drug screening.

Demand-driven active droplet generation and sorting based on positive pressure-controlled fluid wall.

Droplet microfluidics is a rapidly advancing area of microfluidic technology, which offers numerous advantages for cell analysis, such as isolation and accumulation of signals, by confining cells within droplets. However, controlling cell numbers in droplets is challenging due to the uncertainty of random encapsulation which result in many empty droplets. Therefore, more precise control techniques are needed to achieve efficient encapsulation of cells within droplets. Here, an innovative microfluidic droplet manipulation platform had been developed, which employed positive pressure as a stable and controllable driving force for manipulating fluid within chips. The air cylinder, electro-pneumatics proportional valve, and the microfluidic chip were connected through a capillary, which enabled the formation of a fluid wall by creating a difference in hydrodynamic resistance between two fluid streams at the channel junction. Lowering the pressure of the driving oil phase eliminates hydrodynamic resistance and breaks the fluid wall. Regulating the duration of the fluid wall breakage controls the volume of the introduced fluid. Several important droplet microfluidic manipulations were demonstrated on this microfluidic platform, such as sorting of cells/droplets, sorting of droplets co-encapsulated cells and hydrogels, and active generation of droplets encapsulated with cells in a responsive manner. The simple, on-demand microfluidic platform was featured with high stability, good controllability, and compatibility with other droplet microfluidic technologies.

Three Major Gastrointestinal Cancers Could Be Distinguished through Subclass-Specific IgG Glycosylation.

Esophageal cancer (EC), gastric cancer (GC), and colorectal cancer (CRC) are three major digestive tract tumors with higher morbidity and mortality due to significant molecular heterogeneity. Altered IgG glycosylation has been observed in inflammatory activities and disease progression, and the IgG glycome profile could be used for disease stratification. However, IgG N-glycome profiles in these three cancers have not been systematically investigated. Herein, subclass-specific IgG glycosylation in CRC, GC, and EC was comprehensively characterized by liquid chromatography-tandem mass spectrometry. It was found that IgG1 sialylation was decreased in all three cancers, and the alterations in CRC and EC may be subclass-specific. IgG4 mono-galactosylation was increased in all three cancers, which was a subclass-specific change in all of them. Additionally, glycopeptides of IgG1-H5N5, IgG2-H4N3F1, and IgG4-H4N4F1 could distinguish all three cancer groups from controls with fair diagnostic performance. Furthermore, bioinformatics verified the differential expression of relevant glycosyltransferase genes in cancer progression. Significantly, those three gastrointestinal cancers could be distinguished from each other using subclass-specific IgG glycans. These findings demonstrated the spatial and temporal diversity of IgG N-glycome among digestive cancers, increasing our understanding of the molecular mechanisms of EC, GC, and CRC pathogenesis.

Rapid Determination of Phase Diagrams for Biomolecular Liquid-Liquid Phase Separation with Microfluidics.

Biomolecular phase separation is currently emerging in both the medical and life science fields. Meanwhile, the application of liquid-liquid phase separation has been extended to many fields including drug discovery, fibrous material fabrication, 3D printing, and polymer design. Although more than 8600 proteins and other synthetic macromolecules are capable of phase separation as recently reported, there is still a lack of a high-throughput approach to quantitatively characterize its phase behaviors. To meet this requirement, here, we proposed fast and high-resolution acquisition of biomolecular phase diagrams using microfluidic chips. Using this platform, we demonstrated the phase behavior of polyU/RRASLRRASLRRASL in a quantitative manner. Up to 1750 concentration conditions can be generated in 140 min. The detection limitation of our device to capture the saturation concentration for phase separation is about 5 times lower than that of the traditional turbidity method. Thus, our results provide a basis for the rapid acquisition of phase diagrams with high-throughput and pave the way for its wide application.

Rapid Assembly of Cellulose Microfibers into Translucent and Flexible Microfluidic Paper-Based Analytical Devices via Wettability Patterning.

Microfluidic paper-based analytical devices (µPADs) are emerging as powerful analytical platforms in clinical diagnostics, food safety, and environmental protection because of their low cost and favorable substrate properties for biosensing. However, the existing top-down fabrication methods of paper-based chips suffer from low resolution (>200 µm). Additionally, papers have limitations in their physical properties (e.g., thickness, transmittance, and mechanical flexibility). Here, we demonstrate a bottom-up approach for the rapid fabrication of heterogeneously controlled paper-based chip arrays. We simply print a wax-patterned microchip with wettability contrasts, enabling automatic and selective assembly of cellulose microfibers to construct predefined paper-based microchip arrays with controllable thickness. This paper-based microchip printing technology is feasible for various substrate materials ranging from inorganic glass to organic polymers, providing a versatile platform for the full range of applications including transparent devices and flexible health monitoring. Our bottom-up printing technology using cellulose microfibers as the starting material provides a lateral resolution down to 42 ± 3 µm and achieves the narrowest channel barrier down to 33 ± 2 µm. As a proof-of-concept demonstration, a flexible paper-based glucose monitor is built for human health care, requiring only 0.3 µL of sample for testing.

Merging microfluidics with luminescence immunoassays for urgent point-of-care diagnostics of COVID-19.

The Coronavirus disease 2019 (COVID-19) outbreak has urged the establishment of a global-wide rapid diagnostic system. Current widely-used tests for COVID-19 include nucleic acid assays, immunoassays, and radiological imaging. Immunoassays play an irreplaceable role in rapidly diagnosing COVID-19 and monitoring the patients for the assessment of their severity, risks of the immune storm, and prediction of treatment outcomes. Despite of the enormous needs for immunoassays, the widespread use of traditional immunoassay platforms is still limited by high cost and low automation, which are currently not suitable for point-of-care tests (POCTs). Microfluidic chips with the features of low consumption, high throughput, and integration, provide the potential to enable immunoassays for POCTs, especially in remote areas. Meanwhile, luminescence detection can be merged with immunoassays on microfluidic platforms for their good performance in quantification, sensitivity, and specificity. This review introduces both homogenous and heterogenous luminescence immunoassays with various microfluidic platforms. We also summarize the strengths and weaknesses of the categorized methods, highlighting their recent typical progress. Additionally, different microfluidic platforms are described for comparison. The latest advances in combining luminescence immunoassays with microfluidic platforms for POCTs of COVID-19 are further explained with antigens, antibodies, and related cytokines. Finally, challenges and future perspectives were discussed.

A magnet-actuated microfluidic array chip for high-throughput pretreatment and amplification and detection of multiple pathogens.

The outbreak of global infectious diseases has posed a significant threat to public health, requiring the rapid and accurate diagnosis of pathogens promptly for the society to implement immediate control measures to prevent widespread pandemics. In this work, a magnet-actuated microfluidic array chip (MMAC) is developed with integrated sample processing and nucleic acid amplification for the rapid detection of multiple pathogens by loop-mediated isothermal amplification. In comparison to previous works, where fluid control was dependent on external equipment or finger-based manual pressing, the fluid control of the MMAC is realized by magnetically actuating a ferric oxide (Fe3O4) doped polydimethylsiloxane (PDMS) layer that separates the sample from the LAMP reagent in a high-throughput manner, which not only reduces the complexity of fluid control but also enhances the repeatability of detection by eliminating variations in operation by different users. Examination with a testing sample containing Salmonella typhimurium and Escherichia coli showed high specificity for pathogen detection without cross-contamination. The lowest detection concentration was 5.2 copies per µL for Salmonella typhimurium with a detection time of 60 min. The proposed method demonstrated the simultaneous detection of multiple pathogens, which is potentially helpful in applications of immediate diagnosis.

A universal strategy of glyconanoparticle preparation using a bifunctional linker for lectin sensing and cell imaging.

Glyconanoparticles (G-NPs), biofunctional nanomaterials that can fully combine the unique properties of nanoparticles (NPs) with the bioactivities of carbohydrates, have become an appealing nanoplatform in analytical chemistry and biomedical research. However, there is currently a lack of an efficient and universal method for facile immobilization of reducing carbohydrates on NPs while maintaining their structure integrity, greatly limiting the preparation and application of G-NPs. Herein, a new and universal strategy for preparing carbohydrate-functionalized gold nanoclusters (Au NCs) was developed by using S-(3-(methoxyamino)propyl) thioacetate (MPTA) as a new bifunctional linker. MPTA with an N-methoxyamine group (-NHOMe) and a thioacetyl group (-SAc) was synthesized by a two-step strategy and then grafted onto Au NCs by an efficient click reaction. Subsequently, reducing carbohydrates could be readily immobilized onto MPTA-functionalized Au NCs (MPTA-Au NCs) by a reducing end ring-closure reaction under mild conditions. The obtained G-NPs showed average size of 1.9 ± 0.42 nm and strong fluorescence at 610 nm. Carbohydrates grafted on G-NPs still retained their structure integrity and specific recognition ability toward their receptor proteins. Notably, the affinity between G-NPs and proteins was increased by 1300 times compared with free carbohydrates with an association constant of (1.47 ± 0.356) × 106 M-1. The prepared fluorescent G-NPs were also successfully applied to lectin sensing and targeted breast cancer cell imaging with good performance. These results indicated that the intact immobilization of reducing carbohydrates (whether naturally or chemically accessed) on NPs could be easily achieved using MPTA, providing a simple, efficient, and universal strategy for G-NP preparation.

A high-throughput ultrasonic spraying inoculation method promotes colony cultivation of rare microbial species.

Current method for obtaining microbial colonies still relies on traditional dilution and spreading plate (DSP) procedures, which is labor-intensive, skill-dependent, low-throughput and inevitably causing dilution-to-extinction of rare microorganisms. Herein, we proposed a novel ultrasonic spraying inoculation (USI) method that disperses microbial suspensions into millions of aerosols containing single cells, which lately be deposited freely on a gel plate to achieve high-throughput culturing of colonies. Compared with DSP, USI significantly increased both distributing uniformity and throughput of the colonies on agar plates, improving the minimal colony-forming abundance of rare Escherichia coli mixed in a lake sample from 1% to 0.01%. Applying this novel USI to a lake sample, 16 cellulose-degrading colonies were screened out among 4766 colonies on an enlarged 150-mm-diameter LB plate. Meanwhile, they could only be occasionally observed when using commonly used DSP procedures. 16S rRNA sequencing further showed that USI increased colony-forming species from 11 (by DSP) to 23, including seven completely undetectable microorganisms in DSP-reared communities. In addition to avoidance of dilution-to-extinction, operation-friendly USI efficiently inoculated microbial samples on the agar plate in a high-throughput and single-cell form, which eliminated masking or out-competition from other species in associated groups, thereby improving rare species cultivability.

Discovery of a new class of multi-target heterocycle piperidine derivatives as potential antipsychotics with pro-cognitive effect.

A series of benzoisoxazoleylpiperidine derivatives were synthesized by using the multi-target strategies and their potent affinities for dopamine (DA), serotonin (5-HT) and human histamine H3 receptors have been evaluated. Of these compounds, the promising candidate 4w displayed high affinities for D2, D3, 5-HT1A, 5-HT2A and H3, a moderate affinity for 5-HT6, negligible effects on the human ether-a-go-go-related gene (hERG) channel, low affinities for off-target receptors (5-HT2C, adrenergic α1 and H1). In addition, the animal behavioral study revealed that, compared to risperidone, compound 4w significantly inhibited apomorphine-induced climbing and MK-801-induced movement behaviors with a high threshold for catalepsy and low liabilities for weight gain and hyperprolactinemia. Results from the conditioned avoidance response test and novel object recognition task demonstrated that 4w had pro-cognitive effects. Thus, the antipsychotic drug-like activities of 4w indicate that it may be a potential polypharmacological antipsychotic candidate drug.

Multichannel Synchronous Hydrodynamic Gating Coupling with Concentration Gradient Generator for High-Throughput Probing Dynamic Signaling of Single Cells.

Cell signaling greatly affected by complicated and temporally dynamic extracellular microenvironments controls most of the physiological functions in vivo. To reconstruct or simulate such microenvironments in vitro represents a fundamental approach for revealing the underlying mechanisms of those sophisticated processes. Recent advances in microfluidics have added a new dimension to cell signaling analysis, for example, concentration gradient generators (amplitude aspect) or hydrodynamic gating strategy (frequency aspect), but it is still challengeable to capture single-cell dynamic signaling in response to a mimicked extracellular microenvironment with varied stimuli waveforms of different amplitude and frequency in a high-throughput manner. In this article, we proposed a novel microfluidic strategy coupling multichannel synchronous hydrodynamic gating with microfluidic concentration gradient generators (µMHG-CGG) to probe dynamic signaling of single cells with high throughput. The µMHG-CGG allows rapid delivery of dynamic chemical signals in both high frequency (as high as 670 mHz) and multiple amplitude domains at the same time and simultaneously high-throughput probing cell dynamics at single-cell resolution in real time. By applying the proposed system, the mechanisms for encoding/decoding systems (termed "frequency coding" or "amplitude coding") via GPCRs-mediated signaling pathways responding to histamine (HA) and adenosine triphosphate (ATP) in single HeLa cells were investigated. The optimal drug concentrations of single cells responses to HA and ATP individually or in combination were also successfully discussed, allowing us to obtain both single-cell heterogeneity and statistics from the cell population.

A comprehensive analysis of subclass-specific IgG glycosylation in colorectal cancer progression by nanoLC-MS/MS.

Colorectal cancer is associated with changed IgG glycosylation, but the alteration in specific subclasses of IgG is unknown. Initially, we optimized five common IgG glycopeptide enrichment methods to acquire a comprehensive profile of IgG glycopeptides. However, an incomplete tryptic digestion of IgG occurred when using an ordinary protease to protein ratio, which significantly impacted the final statistical analysis. Herein, we introduced a two-step enzymatic digestion, enabling the complete digestion of IgG glycopeptides and further improving the detection intensity of the target glycopeptides. In order to rapidly process and automatically integrate the MS data, we developed a simple and effective code using MATLAB. Following statistical analysis, we observed that IgG1_H3N4F1 and IgG1_H3N4 were substantially increased in CRC, while IgG1_H5N5F1, IgG1_H5N4F1S1 and IgG2_H5N4F1 were markedly decreased. A further evaluation of the diagnostic performance showed that they all achieved a fair performance in discriminating the patients from the normal. In terms of the glycan features, it was demonstrated that the CRC progression was associated with increased agalactosylation, and the decreased digalactosylation and galactosylation per antenna on the diantenna glycans of IgG1 and IgG2. Concurrently, the decreased sialylation of IgG1 was strongly correlated with CRC. Moreover, an analysis of tumor-specific glycosylation showed that the alterations of IgG glycosylation were more significant in colon cancer, and no obvious difference was observed between colon and rectal cancer. This study comprehensively optimized the glycopeptide enrichment methods, evaluated the enzymatic digestion effect, and explored the association between CRC progression and subclass-specific glycosylation.

Development and multicenter performance evaluation of fully automated SARS-CoV-2 IgM and IgG immunoassays.

Objectives: The outbreak of severe acute respiratory syndrome coronavirus 2 (SARS-CoV-2) has rapidly spread globally. The laboratory diagnosis of SARS-CoV-2 infection has relied on nucleic acid testing; however, it has some limitations, such as low throughput and high rates of false negatives. Tests of higher sensitivity are needed to effectively identify infected patients. Methods: This study has developed fully automated chemiluminescent immunoassays to determine IgM and IgG antibodies to SARS-CoV-2 in human serum. The assay performance has been evaluated at 10 hospitals. Clinical specificity was evaluated by measuring 972 hospitalized patients and 586 donors of a normal population. Clinical sensitivity was assessed on 513 confirmed cases of SARS-CoV-2 by RT-PCR. Results: The assays demonstrated satisfied assay precision with coefficient of variation of less than 4.45%. Inactivation of specimen did not affect assay measurement. SARS-CoV-2 IgM showed clinical specificity of 97.33 and 99.49% for hospitalized patients and the normal population respectively, and SARS-CoV-2 IgG showed clinical specificity of 97.43 and 99.15% respectively. SARS-CoV-2 IgM showed clinical sensitivity of 82.54, 92.93, and 84.62% before 7 days, 7-14 days, and after 14 days respectively, since onset of symptoms, and SARS-CoV-2 IgG showed clinical sensitivity of 80.95, 97.98, and 99.15% respectively at the same time points above. Conclusions: We have developed fully automated immunoassays for detecting SARS-CoV-2 IgM and IgG antibodies in human serum. The assays demonstrated high clinical specificity and sensitivity, and add great value to nucleic acid testing in fighting against the global pandemic of the SARS-CoV-2 infection.