Synthetic extremophiles via species-specific formulations improve microbial therapeutics.

Microorganisms typically used to produce food and pharmaceuticals are now being explored as medicines and agricultural supplements. However, maintaining high viability from manufacturing until use remains an important challenge, requiring sophisticated cold chains and packaging. Here we report synthetic extremophiles of industrially relevant gram-negative bacteria (Escherichia coli Nissle 1917, Ensifer meliloti), gram-positive bacteria (Lactobacillus plantarum) and yeast (Saccharomyces boulardii). We develop a high-throughput pipeline to define species-specific materials that enable survival through drying, elevated temperatures, organic solvents and ionizing radiation. Using this pipeline, we enhance the stability of E. coli Nissle 1917 by more than four orders of magnitude over commercial formulations and demonstrate its capacity to remain viable while undergoing tableting and pharmaceutical processing. We further show, in live animals and plants, that synthetic extremophiles remain functional against enteric pathogens and as nitrogen-fixing plant supplements even after exposure to elevated temperatures. This synthetic, material-based stabilization enhances our capacity to apply microorganisms in extreme environments on Earth and potentially during exploratory space travel.

Drinkable in situ-forming tough hydrogels for gastrointestinal therapeutics.

Pills are a cornerstone of medicine but can be challenging to swallow. While liquid formulations are easier to ingest, they lack the capacity to localize therapeutics with excipients nor act as controlled release devices. Here we describe drug formulations based on liquid in situ-forming tough (LIFT) hydrogels that bridge the advantages of solid and liquid dosage forms. LIFT hydrogels form directly in the stomach through sequential ingestion of a crosslinker solution of calcium and dithiol crosslinkers, followed by a drug-containing polymer solution of alginate and four-arm poly(ethylene glycol)-maleimide. We show that LIFT hydrogels robustly form in the stomachs of live rats and pigs, and are mechanically tough, biocompatible and safely cleared after 24 h. LIFT hydrogels deliver a total drug dose comparable to unencapsulated drug in a controlled manner, and protect encapsulated therapeutic enzymes and bacteria from gastric acid-mediated deactivation. Overall, LIFT hydrogels may expand access to advanced therapeutics for patients with difficulty swallowing.

Lipid Nanoparticles for Nucleic Acid Delivery to Endothelial Cells.

Endothelial cells play critical roles in circulatory homeostasis and are also the gateway to the major organs of the body. Dysfunction, injury, and gene expression profiles of these cells can cause, or are caused by, prevalent chronic diseases such as diabetes, cardiovascular disease, and cancer. Modulation of gene expression within endothelial cells could therefore be therapeutically strategic in treating longstanding disease challenges. Lipid nanoparticles (LNP) have emerged as potent, scalable, and tunable carrier systems for delivering nucleic acids, making them attractive vehicles for gene delivery to endothelial cells. Here, we discuss the functions of endothelial cells and highlight some receptors that are upregulated during health and disease. Examples and applications of DNA, mRNA, circRNA, saRNA, siRNA, shRNA, miRNA, and ASO delivery to endothelial cells and their targets are reviewed, as well as LNP composition and morphology, formulation strategies, target proteins, and biomechanical factors that modulate endothelial cell targeting. Finally, we discuss FDA-approved LNPs as well as LNPs that have been tested in clinical trials and their challenges, and provide some perspectives as to how to surmount those challenges.

Efficient Identification of Murine M2 Macrophage Peptide Targeting Ligands by Phage Display and Next-Generation Sequencing.

Peptide ligands are used to increase the specificity of drug carriers to their target cells and to facilitate intracellular delivery. One method to identify such peptide ligands, phage display, enables high-throughput screening of peptide libraries for ligands binding to therapeutic targets of interest. However, conventional methods for identifying target binders in a library by Sanger sequencing are low-throughput, labor-intensive, and provide a limited perspective (<0.01%) of the complete sequence space. Moreover, the small sample space can be dominated by nonspecific, preferentially amplifying "parasitic sequences" and plastic-binding sequences, which may lead to the identification of false positives or exclude the identification of target-binding sequences. To overcome these challenges, we employed next-generation Illumina sequencing to couple high-throughput screening and high-throughput sequencing, enabling more comprehensive access to the phage display library sequence space. In this work, we define the hallmarks of binding sequences in next-generation sequencing data, and develop a method that identifies several target-binding phage clones for murine, alternatively activated M2 macrophages with a high (100%) success rate: sequences and binding motifs were reproducibly present across biological replicates; binding motifs were identified across multiple unique sequences; and an unselected, amplified library accurately filtered out parasitic sequences. In addition, we validate the Multiple Em for Motif Elicitation tool as an efficient and principled means of discovering binding sequences.

Multiplexed gene transfer to a human T-cell line by combining Sleeping Beauty transposon system with methotrexate selection.

Engineered human T-cells are a promising therapeutic modality for cancer immunotherapy. T-cells expressing chimeric antigen receptors combined with additional genes to enhance T-cell proliferation, survival, or tumor targeting may further improve efficacy but require multiple stable gene transfer events. Methods are therefore needed to increase production efficiency for multiplexed engineered cells. In this work, we demonstrate multiplexed, non-viral gene transfer to a human T-cell line with efficient selection (∼ 50%) of cells expressing up to three recombinant open reading frames. The efficient introduction of multiple genes to T-cells was achieved using the Sleeping Beauty transposon system delivered in minicircles by nucleofection. We demonstrate rapid selection for engineered cells using methotrexate (MTX) and a mutant human dihydrofolate reductase resistant to methotrexate-induced metabolic inhibition. Preferential amplification of cells expressing multiple transgenes was achieved by two successive rounds of increasing MTX concentration. This non-viral gene transfer method with MTX step selection can potentially be used in the generation of clinical-grade T-cells housing multiplexed genetic modifications.

Nanoparticles exhibit greater accumulation in kidney glomeruli during experimental glomerular kidney disease.

Loss and dysfunction of glomerular podocytes result in increased macromolecule permeability through the glomerular filtration barrier and nephrotic syndrome. Current therapies can induce and maintain disease remission, but cause serious and chronic complications. Nanoparticle drug carriers could mitigate these side effects by delivering drugs to the kidneys more efficiently than free drug through tailoring of carrier properties. An important extrinsic factor of nanoparticle biodistribution is local pathophysiology, which may drive greater nanoparticle deposition in certain tissues. Here, we hypothesized that a "leakier" filtration barrier during glomerular kidney disease would increase nanoparticle distribution into the kidneys. We examined the effect of nanoparticle size and disease state on kidney accumulation in male BALB/c mice. The effect of size was tested using a panel of fluorescent polystyrene nanoparticles of size 20-200 nm, due to the relevance of this size range for drug delivery applications.Experimental focal segmental glomerulosclerosis was induced using an anti-podocyte antibody that causes abrupt podocyte depletion. Nanoparticles were modified with carboxymethyl-terminated poly(ethylene glycol) for stability and biocompatibility. After intravenous injection, fluorescence from nanoparticles of size 20 and 100 nm, but not 200 nm, was observed in kidney glomeruli and peritubular capillaries. During conditions of experimental focal segmental glomerulosclerosis, the number of fluorescent nanoparticle punctae in kidney glomeruli increased by 1.9-fold for 20 and 100 nm nanoparticles compared to normal conditions. These findings underscore the importance of understanding and leveraging kidney pathophysiology in engineering new, targeted drug carriers that accumulate more in diseased glomeruli to treat glomerular kidney disease.

Optimized nonviral gene delivery for primary urinary renal progenitor cells to enhance cell migration.

Progressive loss of glomerular podocytes during kidney disease leads to irreversible kidney failure, and is exacerbated by the fact that podocytes are terminally differentiated epithelial cells and unable to proliferate. Regeneration of lost podocytes must therefore derive from nonpodocyte sources. Human urine-derived renal progenitor cells (uRPCs) are attractive podocyte progenitors for cell therapy applications due to their availability from patient urine and ability to migrate to injured glomeruli and differentiate into de novo podocytes after intravenous administration. Because gene delivery has emerged as an important strategy to augment the functionality and survival of cell therapies prior to injection, in this work we optimized nonviral gene delivery conditions (cell density, DNA dose, % FBS, and transfection material composition) to primary uRPCs. Using the cationic polymer-peptide conjugate VIPER for gene delivery and the Sleeping Beauty transposon/transposase constructs for gene integration, we optimized transfection parameters to achieve efficient transgene expression (up to 55% transfected cells) and stable transgene expression (>65% integration efficiency) lasting up to 10 days. With these methods, we transfected uRPCs to overexpress CXCR4, an important chemokine receptor that mediates uRPC migration to the kidneys after intravenous injection, and demonstrate that CXCR4-uRPCs exhibit enhanced migration compared to mock-transfected cells.

Boronic acid copolymers for direct loading and acid-triggered release of Bis-T-23 in cultured podocytes.

We report an acid-reversible linker for triggered release of Bis-T-23, an experimental small molecule drug for kidney disease treatment that restores podocyte morphology during disease. Bis-T-23 contains catechols, which form an acid-reversible, covalent boronate ester bond with boronic acids. We synthesized phenylboronic acid-containing polymers using reversible addition-fragmentation chain transfer polymerization that were able to directly load and solubilize Bis-T-23. Because of the reversibility of the boronic ester bond, drug was released in its native form in a pH-dependent manner. The polymers rapidly trafficked into acidic compartments and did not exhibit cytotoxicity, and polymer-drug conjugates successfully delivered Bis-T-23 into cultured podocytes.

Glomerular disease augments kidney accumulation of synthetic anionic polymers.

Polymeric drug carriers can alter the pharmacokinetics of their drug cargoes, thereby improving drug therapeutic index and reducing side effects. Understanding and controlling polymer properties that drive tissue-specific accumulation is critical in engineering targeted drug delivery systems. For kidney disease applications, targeted drug delivery to renal cells that reside beyond the charge- and size-selective glomerular filtration barrier could have clinical potential. However, there are limited reports on polymer properties that might enhance kidney accumulation. Here, we studied the effects of molecular weight and charge on the in vivo kidney accumulation of polymers in health and disease. We synthesized a panel of well-defined polymers by atom transfer radical polymerization to answer several questions. First, the biodistribution of low molecular weight (23-27 kDa) polymers composed of various ratios of neutral:anionic monomers (1:0, 1:1, 1:4) in normal mice was determined. Then, highly anionic (1:4 monomer ratio) low molecular and high molecular weight (47 kDa) polymers were tested in both normal and experimental focal segmental glomerulosclerosis (FSGS) mice, a model that results in loss of glomerular filtration selectivity. Through these studies, we observed that kidney-specific polymer accumulation increases with anionic monomer content, but not molecular weight; experimental FSGS increases kidney accumulation of anionic polymers; and anionic polymers accumulate predominantly in proximal tubule cells, with some distribution in kidney glomeruli. These findings can be applied to the design of polymeric drug carriers to enhance or mitigate kidney accumulation.

Photonic Crystal Optical Tweezers with High Efficiency for Live Biological Samples and Viability Characterization.

We propose and demonstrate a new optical trapping method for single cells that utilizes modulated light fields to trap a wide array of cell types, including mammalian, yeast, and Escherichia coli cells, on the surface of a two-dimensional photonic crystal. This method is capable of reducing the required light intensity, and thus minimizing the photothermal damage to living cells, thereby extending cell viability in optical trapping and cell manipulation applications. To this end, a thorough characterization of cell viability in optical trapping environments was performed. This study also demonstrates the technique using spatial light modulation in patterned manipulation of live cell arrays over a broad area.