Toxic element determination in selected cosmetic products: health risk assessment.

The aim of this research was to determine the content of arsenic (As), cadmium (Cd), lead (Pb), and nickel (Ni) in selected lipsticks and face foundations of different price categories and the health risk assessment associated with these toxic elements via dermal and oral exposure. The samples (10 lipstick and 10 face foundations) were purchased from local markets in Belgrade, Serbia. The samples were prepared by acid digestion and analyzed by atomic absorption spectrometry (flame atomization for Cd, Pb, and Ni and electrothermal atomization for As). Arsenic was found in 50% of lipstick samples and in only two face foundation samples with the highest concentration of 0.28 mg/kg in the lipstick sample. Lead concentration was in the range of 1.15 to 5.12 mg/kg in ten samples. Nickel was found in five samples out of 20, with the highest concentration of 4.20 mg/kg. Cadmium was found in only one face foundation sample in the cheaper price range (1.11 mg/kg). The obtained results indicate that concentrations of As, Pb, Cd, and Ni were within the permissible limits according to Serbian legislation. Health risk associated with these elements was assessed as non-carcinogenic and carcinogenic risk. Obtained hazard quotients (HQs) and hazard indexes (HIs) were below 1, indicating the absence of significant non-carcinogenic health risk due to exposure to these toxic elements (TEs). The carcinogenic risk results show that investigated cosmetic products can be considered low-risky due to the possibility of causing malignant disease.

Health risk assessment of heavy metals in soil, plant, and water samples near "Gacko" power plant, in Bosnia and Herzegovina.

This study assesses heavy metal content in soil, water, and plant material from sites located around the lignite mine and the power plant "Gacko", Bosnia and Herzegovina. The samples were collected, prepared, and analyzed for heavy metals content using the flame atomic absorption spectrophotometer. Samples were analyzed for cadmium, lead, copper, zinc, manganese, and iron. To identify the relationship among the metals in samples and their possible sources, Pearson's correlation and principal component analysis were performed. Health risk assessment was applied to establish potential health risks posed to humans caused by contaminants in different environmental compartments. The results of our analyses show that most soil samples contain copper, and one of those samples had a copper concentration of more than 70 µg/g, which is a critical upper value for agricultural use. In the soil samples that were analyzed, cadmium was also detected, and its concentration was greater than 2 µg/g. Lead, on the other hand, had a concentration that was higher than the maximum permissible for unpolluted soils in 40% of the soil samples that were analyzed. Lead and cadmium concentrations in surface waters mostly contribute to a non-carcinogenic risk in the scenario of recreational swimming exposure. The presence of Cd, a highly toxic element in water, may be explained by the leaching of artificial fertilizers used in the study area, whereas Pb's origin may be geological. The results of this study recommend routine heavy metal monitoring in samples of soil, water, and plants from the examined area so that, if metal concentrations continue increasing, remedial action should be advised to prevent accumulation in the food chain.

Effect of substituents on prediction of TLC retention of tetra-dentate Schiff bases and their Copper(II) and Nickel(II) complexes.

The objectives of this study were to gain insights into structure-retention relationships and to propose the model to estimating their retention. Chromatographic investigation of series of 36 Schiff bases and their copper(II) and nickel(II) complexes was performed under both normal- and reverse-phase conditions. Chemical structures of the compounds were characterized by molecular descriptors which are calculated from the structure and related to the chromatographic retention parameters by multiple linear regression analysis. Effects of chelation on retention parameters of investigated compounds, under normal- and reverse-phase chromatographic conditions, were analyzed by principal component analysis, quantitative structure-retention relationship and quantitative structure-activity relationship models were developed on the basis of theoretical molecular descriptors, calculated exclusively from molecular structure, and parameters of retention and lipophilicity.

In vitro and in silico study of the biological activity of tetradentate Schiff base copper(II) complexes with ethylenediamine-bridge.

The biological activity of six structurally similar tetradentate Schiff base copper(II) complexes, namely [Cu(ethylenediamine-bis-acetylacetonate)] (CuAA) and five derivatives where two methyl groups are replaced by phenyl, (CuPP), CF3 (CuTT) or by mixed groups CH3/CF3 (CuAT), Ph/CF3 (CuPT), and Ph/CH3 (CuAP) has been investigated. The set of antioxidant assays was performed, and the results were expressed as IC50 and EC50 values. The series of complexes showed interesting bioactivity and were investigated for the determination of antioxidant, antifungal, antimicrobial, and cytotoxic activity. A significant antioxidant behavior was exhibited by complex CuAA, greater than Trolox in the Oxygen Radical Absorbance Capacity (ORAC) assay. Antibacterial assay over Gram-positive and Gram-negative pathogenic bacterial strains and some fungal pathogens were studied. Antiproliferative activity of complexes in two human tumor cell lines, breast adenocarcinoma MCF-7, colon adenocarcinoma LS-174, and normal fibroblast cells-MRC-5, examined the effect on cell cycle progression. The significant cytotoxic potential, comparable to cisplatin cytotoxicity, was determined in human breast cancer cell line-MCF-7 with IC50 values being 17.53-31.40 µM and human colon cancer cell line-LS-174 with IC50 values being 15.22-23.92 µM. All tested compounds showed nearly twice more selectivity toward cancer cell lines than normal cells. The interactions of complexes with human serum albumin (HSA), the most prominent protein in plasma, were investigated using spectroscopic fluorescence techniques. The complexes bind to human serum albumin at multiple sites (n = 0.2-1.9), displaying a moderate binding constant Ka = 4.1-12.4 × 104 M-1. The molecular docking experiment effectively showed complex binding to HSA and DNA molecular fragments.

Surface functional groups and degree of carbonization of selected chars from different processes and feedstock.

The knowledge of the structural and chemical properties of biochars is decisive for their application as technical products. For this reason, methods for the characterization of biochars that are generally applicable and allow quality control are highly desired. Several methods that have shown potential in other studies were used to investigate two activated carbons and seven biochars from different processes and feedstock. The chars were chosen to cover a wide range of chemical composition and structural properties as a hardness test for the analytical methods used in this study. Specific problems connected with the pretreatment of samples and drawbacks of some methods for some types of chars could be identified in an integrated consideration of the results from different methods. None of the spectroscopic methods was found to be suitable for the quality control of all types of chars. The most valuable results were obtained by chemical analysis that, however, required the complete determination of the main elements, including that of oxygen, and of inorganic components for adequate results. The combination of X-ray photoelectron spectroscopy (XPS) and FT-IR spectroscopy allows a rough characterization of surface functional groups, but cannot discriminate aliphatic and aromatic OH groups. FT-IR might be a suitable method for the quality control of biochars made at lower temperature. The results of Raman spectroscopy did not well correlate with the amount of sp2 hybridized carbon determined by XPS. A better correlation of XPS data was found with the electrical polarization determined by the method of spectral induced polarization that was used for the first time in conjunction with extensive analytical characterization.

Voltammetric Determination of Lead and Copper in Wine by Modified Glassy Carbon Electrode.

This paper describes the determination of Pb and Cu with a Nafion-modified glassy carbon electrode and MnCo2O4 nanoparticles as working electrode for anodic stripping voltammetry. Pb and Cu were accumulated in HCl/KCl (0.1 mol dm-3) at a potential of -1.4 V (vs. Ag/AgCl electrode) for 480 s, followed by a linear sweep anodic stripping voltammetry (ASV) scan from -1.0 to +0.5 V. Under optimum conditions, the calibration curves were linear in the range of 0.01 - 8 and 0.01 - 5 mg dm-3 for Pb and Cu, respectively. Effect of sample dilution, accumulation time and potential were optimized. A study of interfering substances was performed. A significant increase in current was obtained at the modified electrode in comparison with the bare glassy carbon electrode. The modified electrode was successfully applied for determination of Pb and Cu in wine samples after a simple preparation procedure. Pb and Cu content in wine was used for estimation of the target hazard quotient (THQ) values for minimal and maximal levels of the metals.

Novel approach to the measurement of antithyroglobulin antibodies in human serum - application of the quartz crystal microbalance sensors.

Measurement of antithyroglobulin antibodies (TgAb) is an inevitable laboratory tool in the management of thyroid gland diseases. Currently available immunoassays still have limitations underlying the necessity of the introduction of fast, sensitive, and label-free technologies. Our aim was to develop a method for TgAb measurement in human serum based on the quartz crystal microbalance (QCM) technology. We immobilized thyroglobulin on the surface of Attana LNB Carboxyl sensor chip®, prepared standard curve covering the range of 1-50000 kIU/L, and established optimal measurement conditions. The validation included determination of the detection limit (LOD), functional sensitivity, linearity, precision, as well as the comparison with the results of the radioimmunoassay (RIA). The LOD and functional sensitivity were 4.2 kIU/L and 4.7 kIU/L, respectively. The method was linear in the range of 20-10000 kIU/L. The regression equation for comparison with RIA was CQCM= 1.0056 • CRIA- 24.2778, whereby no significant proportional or systematic difference was present. There was a good agreement with RIA in the classification of patients according to the clinical significance of the results. The developed method has advantages over currently available assays in terms of better LOQ, a higher upper limit of linearity, and precision. The characteristics of the developed method unambiguously show that the application of the QCM biosensors offers a highly reliable novel approach for the measurement of TgAb in human serum.

Synthesis of MnCo2O4 nanoparticles as modifiers for simultaneous determination of Pb(II) and Cd(II).

The porous spinel oxide nanoparticles, MnCo2O4, were synthesized by citrate gel combustion technique. Morphology, crystallinity and Co/Mn content of modified electrode was characterized and determined by Fourier transform infra-red spectroscopy (FT-IR), scanning electron microscopy (SEM), energy dispersive spectrometry (EDS), X-ray diffraction pattern analysis (XRD), simultaneous thermogravimetry and differential thermal analysis (TG/DTA). Nanoparticles were used for modification of glassy carbon electrode (GCE) and new sensor was applied for simultaneous determination of Pb(II) and Cd(II) ions in water samples with the linear sweep anodic stripping voltammetry (LSASV).The factors such as pH, deposition potential and deposition time are optimized. Under optimal conditions the wide linear concentration range from 0.05 to 40 µmol/dm3was obtained for Pb(II), with limit of detection (LOD) of 8.06 nmol/dm3 and two linear concentration ranges were obtained for Cd(II), from 0.05 to 1.6 µmol/dm3 and from 1.6 to 40 µmol/dm3, with calculated LOD of 7.02 nmol/dm3. The selectivity of the new sensor was investigated in the presence of interfering ions. The sensor is stable and it gave reproducible results. The new sensor was succesfully applied on determination of heavy metals in natural waters.

Optimization of a flow injection system with amperometric detection for arsenic determination.

A selective and sensitive analytical procedure for rapid arsenic determination by gas-diffusion flow injection analysis with amperometric detection was developed. The method is based on the arsenite reduction by NaBH(4). Derived arsine diffuses through a PTF membrane into the acceptor flow stream and is amperometrically determined on a platinum working electrode. The limit of detection (3 sigma) at room temperature was 5 microg/dm(3) of As(III). The relative standard deviation for a 1 mg/dm(3) As(III) standard was 1.96% for six repetitive injections. Arsenic(V) was determined after its prereduction with potassium iodide. Arsenic determination was not interferred with by 1 mg/dm(3) Sb(III), 5 mg/dm(3) Sn(II), 10 mg/dm(3) Se(IV), 1 mg/dm(3) As(V), 1 mg/dm(3) hydrasine, 1 mg/dm(3) Fe(II) or 0.5 mg/dm(3) Fe(III) solution. The throughput of this method was 60 analyses per hour. This method was successfully applied to arsenic determination in some power plant waste water samples.

Development of a Flow Injection System for Differential Pulse Amperometry and Its Application for Diazepam Determination.

This work presents the development of a flow injection system for differential pulse amperometry (DPA) for diazepam determination in the presence of oxygen. The thin flow cell consisted of the bare glassy carbon electrode, reference silver/silver chloride, and stainless steel as the auxiliary electrode. Electrochemical reduction of diazepam (DZP) was characterised by cyclic voltammetry. Azomethine reduction peak was used for DZP quantification. The detector response was linear in the range 20-250 µmol/dm3 of diazepam, with a calculated detection limit of 3.83 µg/cm3. Intraday and interday precision were 1.53 and 10.8%, respectively. The method was applied on three beverage samples, energetic drink, and two different beer samples, and obtained recoveries were from 93.65 up to 104.96%. The throughoutput of the method was up to 90 analyses per hour.

Selenazolyl-hydrazones as Novel Selective MAO Inhibitors With Antiproliferative and Antioxidant Activities: Experimental and In-silico Studies.

The novel approach in the treatment of complex multifactorial diseases, such as neurodegenerative disorders and cancer, requires a development of efficient multi-targeting oriented drugs. Since oxidative stress significantly contributes to the pathogenesis of cancer and neurodegenerative disorders, potential drug candidates should possess good antioxidant properties. Due to promising biological activities shown for structurally related (1,3-thiazol-2-yl)hydrazones, a focused library of 12 structurally related benzylidene-based (1,3-selenazol-2-yl)hydrazones was designed as potential multi-targeting compounds. Monoamine oxidases (MAO) A/B inhibition properties of this class of compounds have been investigated. Surprisingly, the p-nitrophenyl-substituted (1,3-selenazol-2-yl)hydrazone 4 showed MAO B inhibition in a nanomolar concentration range (IC50 = 73 nM). Excellent antioxidant properties were confirmed in a number of different in vitro assays. Antiproliferative activity screening on a panel of six human solid tumor cell lines showed that potencies of some of the investigated compounds was comparable or even better than that of the positive control 5-fluorouracil. In-silico calculations of ADME properties pointed to promising good pharmacokinetic profiles of investigated compounds. Docking studies suggest that some compounds, compared to positive controls, have the ability to strongly interact with targets relevant to cancer such as 5'-nucleotidase, and to neurodegenerative diseases such as the small conductance calcium-activated potassium channel protein 1, in addition to confirmation of inhibitory binding at MAO B.

Sensitive flow-injection amperometric detection of iodide using Mn3+ and As3+.

A rapid, selective, and sensitive kinetic flow-injection method for iodide content determination with amperometric detection on a platinum electrode was developed. The method is based on the catalytic effect of iodide on the Mn3+ reaction with As3+ in the presence of sulfuric acid. The calibration curve was linear in the concentration range from 5.0 x 10(-7) to 1.0 x 10(-4) mol/L iodide. The limit of detection (LOD) was found to be 5.0 x 10(-9) mol/L iodide. The relative standard deviations (RSD) were 1.68% and 3.03% for 1.0 x 10(-3) mol/L standard and 1.0 x 10(-6) mol/L iodide solution (n = 6), respectively. The method has been successfully applied for determination of iodide in waters, table salts, fodder, organic substances and human blood sera. The results were compared with those obtained by a standard AOAC (Association of Official Analytical Chemists) method, as well as with those obtained by a kinetic spectrophotometric procedure for determination of iodide.

Assessment of non-steroidal anti-inflammatory and analgesic pharmaceuticals in seawaters of North of Portugal: occurrence and environmental risk.

The occurrence of seven pharmaceuticals and two metabolites belonging to non-steroidal anti-inflammatory drugs and analgesics therapeutic classes was studied in seawaters. A total of 101 samples covering fourteen beaches and five cities were evaluated in order to assess the spatial distribution of pharmaceuticals among north Portuguese coast. Seawaters were selected in order to embrace different bathing water quality (excellent, good and sufficient). Acetaminophen, ketoprofen and the metabolite hydroxyibuprofen were detected in all the seawater samples at maximum concentrations of 584, 89.7 and 287 ng L(-1), respectively. Carboxyibuprofen had the highest seawater concentration (1227 ng L(-1)). The temporal distribution of the selected pharmaceuticals during the bathing season showed that, in general, higher concentrations were detected in August and September. The environmental risk posed by the pharmaceuticals detected in seawaters towards different trophic levels (fish, daphnids and algae) was also assessed. Only diclofenac showed hazard quotients above one for fish, representing a potential risk for aquatic organisms. These results were observed in seawaters classified as excellent bathing water. Additional data is needed in order to support the identification and prioritization of risks posed by pharmaceuticals in marine environment.

Development of a SPE-UHPLC-MS/MS methodology for the determination of non-steroidal anti-inflammatory and analgesic pharmaceuticals in seawater.

An analytical methodology for the simultaneous determination of seven pharmaceuticals and two metabolites belonging to the non-steroidal anti-inflammatory drugs (NSAIDs) and analgesics therapeutic groups was developed based on off-line solid-phase extraction and ultra-high performance liquid chromatography coupled to tandem mass spectrometry (SPE-UHPLC-MS/MS). Extraction conditions were optimized taking into account parameters like sorbent material, sample volume and sample pH. Method detection limits (MDLs) ranging from 0.02 to 8.18 ng/L were obtained. This methodology was successfully applied to the determination of the selected pharmaceuticals in seawater samples of Atlantic Ocean in the Northern Portuguese coast. All the pharmaceuticals have been detected in the seawater samples, with pharmaceuticals like ibuprofen, acetaminophen, ketoprofen and the metabolite hydroxyibuprofen being the most frequently detected at concentrations that can reach some hundreds of ng/L.

Anthelmintic activity in vivo of epiisopiloturine against juvenile and adult worms of Schistosoma mansoni.

Schistosomiasis is a serious disease currently estimated to affect more that 207 million people worldwide. Due to the intensive use of praziquantel, there is increasing concern about the development of drug-resistant strains. Therefore, it is necessary to search for and investigate new potential schistosomicidal compounds. This work reports the in vivo effect of the alkaloid epiisopiloturine (EPI) against adults and juvenile worms of Schistosoma mansoni. EPI was first purified its thermal behavior and theoretical solubility parameters charaterised. In the experiment, mice were treated with EPI over the 21 days post-infection with the doses of 40 and 200 mg/kg, and 45 days post-infection with single doses of 40, 100 and 300 mg/kg. The treatment with EPI at 40 mg/kg was more effective in adult worms when compared with doses of 100 and 300 mg/kg. The treatment with 40 mg/kg in adult worms reduced parasite burden significantly, lead to reduction in hepatosplenomegaly, reduced the egg burden in faeces, and decreased granuloma diameter. Scanning electron microscopy revealed morphological changes to the parasite tegument after treatment, including the loss of important features. Additionally, the in vivo treatment against juvenile with 40 mg/kg showed a reduction of the total worm burden of 50.2%. Histopathological studies were performed on liver, spleen, lung, kidney and brain and EPI was shown to have a DL50 of 8000 mg/kg. Therefore EPI shows potential to be used in schistosomiasis treatment. This is the first time that schistosomicidal in vivo activity of EPI has been reported.