Synthesis, Structure and (Photo)Catalytic Behavior of Ce-MOFs Containing Perfluoroalkylcarboxylate Linkers: Experimental and Theoretical Insights.

Cerium-based Metal-Organic frameworks (Ce-MOFs) are attracting increasing interest due to their similar structural features to zirconium MOFs. The redox behavior of Ce(III/IV) adds a range of properties to the compounds. Recently, perfluorinated linkers have been used in the synthesis of MOFs to introduce new characteristic into the structure. We report the synthesis and structural characterization of Ce(IV)-based MOFs constructed using two perfluorinated alkyl linkers. Their structure, based on hexanuclear Ce6O4(OH)4 12+ clusters linked to each other by the dicarboxylate ions, has been solved ab-initio from X-ray powder diffraction data and refined by the Rietveld method. The crystallization kinetics and the MOF formation mechanism was also invesitigated by Synchrotron radiation with XAS spectroscopies (EXAFS and XANES). The MOFs present the same fcu cubic topology as observed in MOF-801 and UiO-66, and they showed good stability in water at different pH conditions. The electronic structure of these MOFs has been studied by DFT calculations in order to obtain insights into the density of states structure of the reported compounds, resulting in band gaps in the range of 2.8-3.1 eV. Their catalytic properties were tested both thermally and under visible light irradiation for the degradation of methyl orange (MO) dye.

Engineering the Charge Density on an In2.77S4/Porous Organic Polymer Hybrid Photocatalyst for CO2-to-Ethylene Conversion Reaction.

The development of an efficient photocatalyst for C2 product formation from CO2 is of urgent importance toward the deployment of solar-fuel production. Here, we report a template-free, cost-effective synthetic strategy to develop a carbazole-derived porous organic polymer (POP)-based composite catalyst. The composite catalyst is comprised of In2.77S4 and porous organic polymer (POP) and is held together by induced-polarity-driven electrostatic interaction. Utilizing the synergy of the catalytically active In centers and light-harvesting POPs, the catalyst showed 98.9% selectivity toward the generation of C2H4, with a formation rate of 67.65 µmol g-1 h-1. Two different oxidation states of the In2.77S4 spinel were exploited for the C-C coupling process, and this was investigated by X-ray photoelectron spectroscopy (XPS), X-ray absorption spectroscopy (XAS), and density functional theory (DFT) calculations. The role of POP was elucidated via several photophysical and photoelectrochemical studies. The electron transfer was mapped by several correlated approaches, which assisted in establishing the Z-scheme mechanism. Furthermore, the mechanism of C2H4 formation was extensively investigated using density functional theory (DFT) calculations from multiple possible pathways.

Synthesis, Crystal Structure, and Photocatalytic Properties of Two Isoreticular Ce(IV)-MOFs with an Infinite Rod-Shaped Inorganic Building Unit.

The use of the V-shaped linker molecules 4,4'-oxydibenzoic acid (H2ODB) and 4,4'-carbonyldibenzoic acid (H2CDB) led to the discovery of two isoreticular Ce(IV)-based metal-organic frameworks (MOFs) of composition [CeO(H2O)(L)], L = ODB2-, CDB2-, denoted CAU-58 (CAU = Christian-Albrechts-University). The recently developed Ce-MOF synthesis approach in acetonitrile as the solvent proved effective in accessing Ce(IV)-MOF structures with infinite rod-shaped inorganic building units (IBUs) and circumventing the formation of the predominantly observed hexanuclear [Ce6O8] cluster. For the structure determination of the isoreticular MOFs, three-dimensional electron diffraction (3D ED) and powder X-ray diffraction (PXRD) data were used in combination with density functional theory (DFT) calculations. [CeO(H2O)(CDB)] shows reversible H2O adsorption by stirring in water and thermal treatment at 190 °C, which leads to a unit cell volume change of 11%. The MOFs feature high thermal stabilities (T > 290 °C), which exceed those of most Ce(IV)-MOFs and can be attributed to the infinite rod-shaped IBU. Surface and bulk oxidation states of the cerium ions were analyzed via X-ray photoelectron spectroscopy (XPS) and X-ray absorption near-edge spectroscopy (XANES). While Ce(III) ions are observed by the highly surface-sensitive XPS method, the bulk material contains predominantly Ce(IV) ions according to XANES. Application of the MOFs as catalysts for the catalytic degradation of methyl orange in aqueous solutions was also studied. While degradation activity for both MOFs was observed, only CAU-58-ODB revealed enhanced photocatalytic activity under ultraviolet (UV) light. The photocatalytic mechanism likely involves a ligand-to-metal charge transfer (LMCT) from the linkers to the Ce(IV) centers. Analyses by XANES and inductively coupled plasma-optical emission spectroscopy (ICP-OES) demonstrate that leaching of Cerium ions as well as partial reduction of Ce(IV) to Ce(III) takes place during catalysis. At the same time, PXRD data confirm the structural stability of the remaining MOF catalysts.

Discovery and In Situ Crystallization Studies of Cerium-Based Metal-Organic Frameworks with V-Shaped Linker Molecules.

We report the discovery and characterization of two porous Ce(III)-based metal-organic frameworks (MOFs) with the V-shaped linker molecules 4,4'-sulfonyldibenzoate (SDB2-) and 4,4'-(hexafluoroisopropylidene)bis(benzoate) (hfipbb2-). The compounds of framework composition [Ce2(H2O)(SDB)3] (1) and [Ce2(hfipbb)3] (2) were obtained by using a synthetic approach in acetonitrile that we recently established. Structure determination of 1 was accomplished from 3D electron diffraction (3D ED) data, while 2 could be refined against powder X-ray diffraction (PXRD) data using the crystal structure of an isostructural La-MOF as the starting model. Their framework structures consist of chain-like inorganic building units (IBUs) or hybrid-BUs that are interconnected by the V-shaped linker molecules to form framework structures with channel-type pores. The composition of both compounds was confirmed by PXRD, elemental analysis, as well as NMR and IR spectroscopy. Interestingly, despite the use of (NH4)2[CeIV(NO3)6] in the synthesis, cerium ions in both MOFs occur exclusively in the + III oxidation state as determined by X-ray absorption near edge structure (XANES) and X-ray photoelectron spectroscopy (XPS). Thermal analyses reveal remarkably high thermal stabilities of ≥400 °C for the MOFs. Initial N2 sorption measurements revealed the peculiar sorption behavior of 2 which prompted a deeper investigation by Ar and CO2 sorption experiments. The combination with nonlocal density functional theory (NL-DFT) calculations adds to the understanding of the nature of the different pore diameters in 2. An extensive quasi-simultaneous in situ XANES/XRD investigation was carried out to unveil the formation of Ce-MOFs during the solvothermal syntheses in acetonitrile. The crystallization of the two Ce(III)-MOFs presented herein as well as two previously reported Ce(IV)-MOFs, all obtained by a similar synthetic approach, were studied. While the XRD patterns show time-dependent MOF crystallization, the XANES data reveal the presence of Ce(III) intermediates and their subsequent conversion to the MOFs. The addition of acetic acid in combination with the V-shaped linker molecule was identified as the crucial factor for the formation of the crystalline Ce(III/IV)-MOFs.

High-Porosity Metal-Organic Framework Glasses.

We report a synthetic strategy to link titanium-oxo (Ti-oxo) clusters into metal-organic framework (MOF) glasses with high porosity though the carboxylate linkage. A new series of MOF glasses was synthesized by evaporation of solution containing Ti-oxo clusters Ti16 O16 (OEt)32 , linkers, and m-cresol. The formation of carboxylate linkages between the Ti-oxo clusters and the carboxylate linkers was confirmed by Fourier-transform infrared (FT-IR) spectroscopy. The structural integrity of the Ti-oxo clusters within the glasses was evidenced by both X-ray absorption near edge structure (XANES) and 17 O magic-angle spinning (MAS) NMR. After ligand exchange and activation, the fumarate-linked MOF glass, termed Ti-Fum, showed a N2 Brunauer-Emmett-Teller (BET) surface areas of 923 m2 g-1 , nearly three times as high as the phenolate-linked MOF glass with the highest BET surface area prior to this report.

Hydrogenation of ethylene over palladium: evolution of the catalyst structure by operando synchrotron-based techniques.

Palladium-based catalysts are exploited on an industrial scale for the selective hydrogenation of hydrocarbons. The formation of palladium carbide and hydride phases under reaction conditions changes the catalytic properties of the material, which points to the importance of operando characterization for determining the relation between the relative fractions of the two phases and the catalyst performance. We present a combined time-resolved characterization by X-ray absorption spectroscopy (in both near-edge and extended regions) and X-ray diffraction of a working palladium-based catalyst during the hydrogenation of ethylene in a wide range of partial pressures of ethylene and hydrogen. Synergistic coupling of multiple techniques allowed us to follow the structural evolution of the palladium lattice as well as the transitions between the metallic, hydride and carbide phases of palladium. The nanometric dimensions of the particles resulted in the considerable contribution of both surface and bulk carbides to the X-ray absorption spectra. During the reaction, palladium carbide is formed, which does not lead to a loss of activity. Unusual contraction of the unit cell parameter of the palladium lattice in the spent catalyst was observed upon increasing hydrogen partial pressure.

Photoactivated Osmium Arene Anticancer Complexes.

Half-sandwich Os-arene complexes exhibit promising anticancer activity, but their photochemistry has hardly been explored. To exploit the photocytotoxicity and photochemistry of Os-arenes, O,O-chelated complexes [Os(η6-p-cymene)(Curc)Cl] (OsCUR-1, Curc = curcumin) and [Os(η6-biphenyl)(Curc)Cl] (OsCUR-2), and N,N-chelated complexes [Os(η6-biphenyl)(dpq)I]PF6 (OsDPQ-2, dpq = pyrazino[2,3-f][1,10]phenanthroline) and [Os(η6-biphenyl)(bpy)I]PF6 (OsBPY-2, bpy = 2,2'-bipyridine), have been investigated. The Os-arene curcumin complexes showed remarkable photocytotoxicity toward a range of cancer cell lines (blue light IC50: 2.6-5.8 µM, photocytotoxicity index PI = 23-34), especially toward cisplatin-resistant cancer cells, but were nontoxic to normal cells. They localized mainly in mitochondria in the dark but translocated to the nucleus upon photoirradiation, generating DNA and mitochondrial damage, which might contribute toward overcoming cisplatin resistance. Mitochondrial damage, apoptosis, ROS generation, DNA damage, angiogenesis inhibition, and colony formation were observed when A549 lung cancer cells were treated with OsCUR-2. The photochemistry of these Os-arene complexes was investigated by a combination of NMR, HPLC-MS, high energy resolution fluorescence detected (HERFD), X-ray adsorption near edge structure (XANES) spectroscopy, total fluorescence yield (TFY) XANES spectra, and theoretical computation. Selective photodissociation of the arene ligand and oxidation of Os(II) to Os(III) occurred under blue light or UVA excitation. This new approach to the design of novel Os-arene complexes as phototherapeutic agents suggests that the novel curcumin complex OsCUR-2, in particular, is a potential candidate for further development as a photosensitizer for anticancer photoactivated chemotherapy (PACT).

Investigating the role of Cu-oxo species in Cu-nitrate formation over Cu-CHA catalysts.

The speciation of framework-interacting CuII sites in Cu-chabazite zeolite catalysts active in the selective catalytic reduction of NOx with NH3 is studied, to investigate the influence of the Al content on the copper structure and their reactivity towards a NO/O2 mixture. To this aim, three samples with similar Cu densities and different Si/Al ratios (5, 15 and 29) were studied using in situ X-ray absorption spectroscopy (XAS), FTIR and diffuse reflectance UV-Vis during pretreatment in O2 followed by the reaction. XAS and UV-Vis data clearly show the main presence of Z2CuII sites (with Z representing a framework negative charge) at a low Si/Al ratio, as predicted. EXAFS wavelet transform analysis showed a non-negligible fraction of proximal Z2CuII monomers, possibly stabilized into two 6-membered rings within the same cage. These sites are not able to form Cu-nitrates by interaction with NO/O2. By contrast, framework-anchored Z[CuII(NO3)] complexes with a chelating bidentate structure are formed in samples with a higher Si/Al ratio, by reaction of NO/O2 with Z[CuII(OH)] sites or structurally similar mono- or multi-copper Zx[CuIIxOy] sites. Linear combination fit (LCF) analysis of the XAS data showed good agreement between the fraction of Z[CuII(OH)]/Zx[CuIIxOy] sites formed during activation in O2 and that of Z[CuII(NO3)] complexes formed by reaction with NO/O2, further confirming the chemical inertia of Z2CuII towards these reactants in the absence of solvating NH3 molecules.

Structure and Reactivity of Oxygen-Bridged Diamino Dicopper(II) Complexes in Cu-Ion-Exchanged Chabazite Catalyst for NH3-Mediated Selective Catalytic Reduction.

The NH3-mediated selective catalytic reduction (NH3-SCR) of NOx over Cu-ion-exchanged chabazite (Cu-CHA) catalysts is the basis of the technology for abatement of NOx from diesel vehicles. A crucial step in this reaction is the activation of oxygen. Under conditions for low-temperature NH3-SCR, oxygen only reacts with CuI ions, which are present as mobile CuI diamine complexes [CuI(NH3)2]+. To determine the structure and reactivity of the species formed by oxidation of these CuI diamine complexes with oxygen at 200 °C, we have followed this reaction, using a Cu-CHA catalyst with a Si/Al ratio of 15 and 2.6 wt% Cu, by X-ray absorption spectroscopies (XANES and EXAFS) and diffuse reflectance UV-Vis spectroscopy, with the support of DFT calculations and advanced EXAFS wavelet transform analysis. The results provide unprecedented direct evidence for the formation of a [Cu2(NH3)4O2]2+ mobile complex with a side-on µ-η2,η2-peroxo diamino dicopper(II) structure, accounting for 80-90% of the total Cu content. These [Cu2(NH3)4O2]2+ are completely reduced to [CuI(NH3)2]+ at 200 °C in a mixture of NO and NH3. Some N2 is formed as well, which suggests the role of the dimeric complexes in the low-temperature NH3-SCR reaction. The reaction of [Cu2(NH3)4O2]2+ complexes with NH3 leads to a partial reduction of the Cu without any formation of N2. The reaction with NO results in an almost complete reduction to CuI, under the formation of N2. This indicates that the low-temperature NH3-SCR reaction proceeds via a reaction of these complexes with NO.

EXAFS wavelet transform analysis of Cu-MOR zeolites for the direct methane to methanol conversion.

Cu-exchanged zeolites have been shown to possess Cu-oxo species active towards the direct methane to methanol (DMTM) conversion, carried out through a chemical-looping approach. Different Cu-zeolites have been investigated for the DMTM process, with Cu-mordenite (Cu-MOR) being among the most active. In this context, an accurate determination of the local structure and nuclearity of selective Cu-oxo species responsible for an efficient DMTM conversion still represents an ongoing challenge for characterization methods, including synchrotron-based X-ray absorption spectroscopy (XAS). Herein, we explore the potential of an alternative analysis of Extended X-ray Absorption Fine Structure (EXAFS) data using wavelet transform (WT) to enhance the technique sensitivity to multimeric Cu species hosted in the MOR framework. Combining ex situ XAS measurements under model red-ox conditions with in situ data collected after the key steps of the DMTM process, we demonstrate how EXAFS-WT enables unambiguous detection of Cu-Cu scattering contributions from multimeric Cu-species. As also confirmed by complementary in situ IR spectroscopy results, these are observed to dynamically respond to the chemical environment over the different conditions probed. We finally report a proof-of-concept EXAFS fit using the WT representation, applied to the structural refinement of O2-activated Cu-MOR. The fitting results reveal a Cu local coordination environment consistent with mono-(µ-oxo) di-copper cores, with Cu-Cu separation of ∼3.1 Å, paving the way to future applications and developments of the method in the field of Cu-zeolite research and beyond.

A Titanium(IV)-Based Metal-Organic Framework Featuring Defect-Rich Ti-O Sheets as an Oxidative Desulfurization Catalyst.

While titanium-based metal-organic frameworks (MOFs) have been widely studied for their (photo)catalytic potential, only a few TiIV MOFs have been reported owing to the high reactivity of the employed titanium precursors. The synthesis of COK-47 is now presented, the first Ti carboxylate MOF based on sheets of TiIV O6 octahedra, which can be synthesized with a range of different linkers. COK-47 can be synthesized as an inherently defective nanoparticulate material, rendering it a highly efficient catalyst for the oxidation of thiophenes. Its structure was determined by continuous rotation electron diffraction and studied in depth by X-ray total scattering, EXAFS, and solid-state NMR. Furthermore, its photoactivity was investigated by electron paramagnetic resonance and demonstrated by catalytic photodegradation of rhodamine 6G.

Exact Stoichiometry of Ce xZr6- x Cornerstones in Mixed-Metal UiO-66 Metal-Organic Frameworks Revealed by Extended X-ray Absorption Fine Structure Spectroscopy.

Bimetallic Ce/Zr-UiO-66 metal-organic frameworks (MOFs) proved to be promising materials for various catalytic redox applications, representing, together with other bimetallic MOFs, a new generation of porous structures. However, no direct proof for the presence of both metals in a single cornerstone of UiO-type MOFs was reported so far. Employing element-selective X-ray absorption spectroscopy techniques herein, we demonstrate, for the first time, that our synthesis route allows obtaining Ce/Zr-UiO-66 MOFs with desired Ce content and bimetallic CeZr5 cornerstones. Performing multiple-edge extended X-ray absorption fine structure analysis, we determine the exact stoichiometry of the cornerstones, which explains the dependence of thermal and chemical stability of the materials on Ce content.

The Nuclearity of the Active Site for Methane to Methanol Conversion in Cu-Mordenite: A Quantitative Assessment.

The direct conversion of methane to methanol (MTM) is a reaction that has the potential to disrupt a great part of the synthesis gas-derived chemical industry. However, despite many decades of research, active enough catalysts and suitable processes for industrial application are still not available. Recently, several copper-exchanged zeolites have shown considerable activity and selectivity in the direct MTM reaction. Understanding the nature of the active site in these materials is essential for any further development in the field. Herein, we apply multivariate curve resolution analysis of X-ray absorption spectroscopy data to accurately quantify the fraction of active Cu in Cu-MOR (MOR = mordenite), allowing an unambiguous determination of the active site nuclearity as a dicopper site. By rationalizing the compositional parameters and reaction conditions, we achieve the highest methanol yield per Cu yet reported for MTM over Cu-zeolites, of 0.47 mol/mol.

Unravelling the Redox-catalytic Behavior of Ce4+ Metal-Organic Frameworks by X-ray Absorption Spectroscopy.

The introduction of Ce4+ as a structural cation has been shown to be a promising route to redox active metal-organic frameworks (MOFs). However, the mechanism by which these MOFs act as redox catalysts remains unclear. Herein, we present a detailed study of the active site in [Ce6 O4 (OH)4 ]-based MOFs such as Ce-UiO-66, involved in the aerobic oxidation of benzyl alcohol, chosen as a model redox reaction. X-ray absorption spectroscopy (XAS) data confirm the reduction of up to one Ce4+ ion per Ce6 cluster with a corresponding outwards radial shift due to the larger radius of the Ce3+ cation, while not compromising the structural integrity of the framework, as evidenced by powder X-ray diffraction. This unambiguously demonstrates the involvement of the metal node in the catalytic cycle and explains the need for 2,2,6,6-tetramethyl-1-piperidinyloxy (TEMPO) as a redox mediator to bridge the gap between the one-electron oxidation of the Ce4+ /Ce3+ couple and the two-electron alcohol oxidation. Finally, an improved catalytic system with Ce-MOF-808 and TEMPO was developed which outperformed all other tested Ce4+ -MOFs.

Time-resolved operando studies of carbon supported Pd nanoparticles under hydrogenation reactions by X-ray diffraction and absorption.

The formation of palladium hydride and carbide phases in palladium-based catalysts is a critical process that changes the catalytic performance and selectivity of the catalysts in important industrial reactions, such as the selective hydrogenation of alkynes or alkadienes. We present a comprehensive study of a 5 wt% carbon supported Pd nanoparticle (NP) catalyst in various environments by using in situ and operando X-ray absorption spectroscopy and diffraction, to determine the structure and evolution of palladium hydride and carbide phases, and their distribution throughout the NPs. We demonstrate how the simultaneous analysis of extended X-ray absorption fine structure (EXAFS) spectra and X-ray powder diffraction (XRPD) patterns allows discrimination between the inner "core" and outer "shell" regions of the NP during hydride phase formation at different temperatures and under different hydrogen pressures, indicating that the amount of hydrogen in the shell region of the NP is lower than that in the core. For palladium carbide, advanced analysis of X-ray absorption near-edge structure (XANES) spectra allows the detection of Pd-C bonds with carbon-containing molecules adsorbed at the surface of the NPs. In addition, H/Pd and C/Pd stoichiometries of PdHx and PdCy phases were obtained by using theoretical modelling and fitting of XANES spectra. Finally, the collection of operando time-resolved XRPD patterns (with a time resolution of 5 s) allowed the detection, during the ethylene hydrogenation reaction, of periodic oscillations in the NPs core lattice parameter, which were in phase with the MS signal of ethane (product) and in antiphase with the MS signal of H2 (reactant), highlighting an interesting direct structure-reactivity relationship. The presented studies show how a careful combination of X-ray absorption and diffraction can differentiate the structure of the core, shell and surface of the palladium NPs under working conditions and prove their relevant roles in catalysis.

Operando study of palladium nanoparticles inside UiO-67 MOF for catalytic hydrogenation of hydrocarbons.

Functionalization of metal-organic frameworks with metal nanoparticles (NPs) is a promising way for producing advanced materials for catalytic applications. We present the synthesis and in situ characterization of palladium NPs encapsulated inside a functionalized UiO-67 metal-organic framework. The initial structure was synthesized with 10% of PdCl2bpydc moieties with grafted Pd ions replacing standard 4,4'-biphenyldicarboxylate linkers. This material exhibits the same high crystallinity and thermal stability of standard UiO-67. Formation of palladium NPs was initiated by sample activation in hydrogen and monitored by in situ X-ray powder diffraction and X-ray absorption spectroscopy (XAS). The reduction of PdII ions to Pd0 occurs above 200 °C in 6% H2/He flow. The formed palladium NPs have an average size of 2.1 nm as limited by the cavities of UiO-67 structure. The resulting material showed high activity towards ethylene hydrogenation. Under reaction conditions, palladium was found to form a carbide structure indicated by operando XAS, while formation of ethane was monitored by mass spectroscopy and infra-red spectroscopy.

Methane to Methanol: Structure-Activity Relationships for Cu-CHA.

Cu-exchanged zeolites possess active sites that are able to cleave the C-H bond of methane at temperatures ≤200 °C, enabling its selective partial oxidation to methanol. Herein we explore this process over Cu-SSZ-13 materials. We combine activity tests and X-ray absorption spectroscopy (XAS) to thoroughly investigate the influence of reaction parameters and material elemental composition on the productivity and Cu speciation during the key process steps. We find that the CuII moieties responsible for the conversion are formed in the presence of O2 and that high temperature together with prolonged activation time increases the population of such active sites. We evidence a linear correlation between the reducibility of the materials and their methanol productivity. By optimizing the process conditions and material composition, we are able to reach a methanol productivity as high as 0.2 mol CH3OH/mol Cu (125 µmol/g), the highest value reported to date for Cu-SSZ-13. Our results clearly demonstrate that high populations of 2Al Z2CuII sites in 6r, favored at low values of both Si:Al and Cu:Al ratios, inhibit the material performance by being inactive for the conversion. Z[CuIIOH] complexes, although shown to be inactive, are identified as the precursors to the methane-converting active sites. By critical examination of the reported catalytic and spectroscopic evidence, we propose different possible routes for active-site formation.

Reversible Capture and Release of Cl2 and Br2 with a Redox-Active Metal-Organic Framework.

Extreme toxicity, corrosiveness, and volatility pose serious challenges for the safe storage and transportation of elemental chlorine and bromine, which play critical roles in the chemical industry. Solid materials capable of forming stable nonvolatile compounds upon reaction with elemental halogens may partially mitigate these challenges by allowing safe halogen release on demand. Here we demonstrate that elemental halogens quantitatively oxidize coordinatively unsaturated Co(II) ions in a robust azolate metal-organic framework (MOF) to produce stable and safe-to-handle Co(III) materials featuring terminal Co(III)-halogen bonds. Thermal treatment of the oxidized MOF causes homolytic cleavage of the Co(III)-halogen bonds, reduction to Co(II), and concomitant release of elemental halogens. The reversible chemical storage and thermal release of elemental halogens occur with no significant losses of structural integrity, as the parent cobaltous MOF retains its crystallinity and porosity even after three oxidation/reduction cycles. These results highlight a material operating via redox mechanism that may find utility in the storage and capture of other noxious and corrosive gases.

The Cu-CHA deNOx Catalyst in Action: Temperature-Dependent NH3-Assisted Selective Catalytic Reduction Monitored by Operando XAS and XES.

The small-pore Cu-CHA zeolite is today the object of intensive research efforts to rationalize its outstanding performance in the NH3-assisted selective catalytic reduction (SCR) of harmful nitrogen oxides and to unveil the SCR mechanism. Herein we exploit operando X-ray spectroscopies to monitor the Cu-CHA catalyst in action during NH3-SCR in the 150-400 °C range, targeting Cu oxidation state, mobility, and preferential N or O ligation as a function of reaction temperature. By combining operando XANES, EXAFS, and vtc-XES, we unambiguously identify two distinct regimes for the atomic-scale behavior of Cu active-sites. Low-temperature SCR, up to ∼200 °C, is characterized by balanced populations of Cu(I)/Cu(II) sites and dominated by mobile NH3-solvated Cu-species. From 250 °C upward, in correspondence to the steep increase in catalytic activity, the largely dominant Cu-species are framework-coordinated Cu(II) sites, likely representing the active sites for high-temperature SCR.

Unveiling the Role and Stabilization Mechanism of Cu+ into Defective Ce-MOF Clusters during CO Oxidation.

Copper single-site catalysts supported on Zr-based metal-organic frameworks (MOFs) are well-known systems in which the nature of the active sites has been deeply investigated. Conversely, the redox chemistry of the Ce-counterparts is more limited, because of the often-unclear Cu2+/Cu+ and Ce4+/Ce3+ pairs behavior. Herein, we studied a novel Cu2+ single-site catalyst supported on a defective Ce-MOF, Cu/UiO-67(Ce), as a catalyst for the CO oxidation reaction. Based on a combination of in situ DRIFT and operando XAS spectroscopies, we established that Cu+ sites generated during catalysis play a pivotal role. Moreover, the oxygen vacancies associated with Ce3+ sites and presented in the defective Cu/UiO-67(Ce) material are able to activate the O2 molecules, closing the catalytic cycle. The results presented in this work open a new route for the design of active and stable single-site catalysts supported on defective Ce-MOFs.