Selective Gold Precipitation by a Tertiary Diamide Driven by Thermodynamic Control.

The simple diamide ligand L was previously shown to selectively precipitate gold from acidic solutions typical of e-waste leach streams, with precipitation of gallium, iron, tin, and platinum possible under more forcing conditions. Herein, we report direct competition experiments to afford the order of selectivity. Thermal analysis indicates that the gold-, gallium-, and iron-containing precipitates present as the most thermodynamically stable structures at room temperature, while the tin-containing structure does not. Computational modeling established that the precipitation process is thermodynamically driven, with ion exchange calculations matching the observed experimental selectivity ordering. Calculations also show that the stretched ligand conformation seen in the X-ray crystal structure of the gold-containing precipitate is more strained than in the structures of the other metal precipitates, indicating that intermolecular interactions likely dictate the selectivity ordering. This was confirmed through a combination of Hirshfeld, noncovalent interaction (NCI), and quantum theory of atoms in molecules (QTAIM) analyses, which highlight favorable halogen···halogen contacts between metalates and pseudo-anagostic C-H···metal interactions in the crystal structure of the gold-containing precipitate.

Efficient Recycling of Gold and Copper from Electronic Waste by Selective Precipitation.

The recycling of metals from electronic waste (e-waste) using efficient, selective, and sustainable processes is integral to circular economy and net-zero aspirations. Herein, we report a new method for the selective precipitation of metals such as gold and copper that offsets the use of organic solvents that are traditionally employed in solvent extraction processes. We show that gold can be selectively precipitated from a mixture of metals in hydrochloric acid solution using triphenylphosphine oxide (TPPO), as the complex [(TPPO)4 (H5 O2 )][AuCl4 ]. By tuning the acid concentration, controlled precipitation of gold, zinc and iron can be achieved. We also show that copper can be selectively precipitated using 2,3-pyrazinedicarboxylic acid (2,3-PDCA), as the complex [Cu(2,3-PDCA-H)2 ]n ⋅ 2n(H2 O). The combination of these two precipitation methods resulted in the recovery of 99.5 % of the Au and 98.5 % of the Cu present in the connector pins of an end-of-life computer processing unit. The selectivity of these precipitation processes, combined with their straightforward operation and the ability to recycle and reuse the precipitants, suggests potential industrial uses in the purification of gold and copper from e-waste.

Role of the Meso Substituent in Defining the Reduction of Uranyl Dipyrrin Complexes.

The uranyl complex UVIO2Cl(LMes) of the redox-active, acyclic dipyrrin-diimine anion LMes- [HLMes = 1,9-di-tert-butyl-imine-5-(mesityl)dipyrrin] is reported, and its redox property is explored and compared with that of the previously reported UVIO2Cl(LF) [HLF = 1,9-di-tert-butyl-imine-5-(pentafluorophenyl)dipyrrin] to understand the influence of the meso substituent. Cyclic voltammetry, electron paramagnetic resonance spectroscopy, and density functional theory studies show that the alteration from an electron-withdrawing meso substituent to an electron-donating meso substituent on the dipyrrin ligand significantly modifies the stability of the products formed after reduction. For UVIO2Cl(LMes), the formation of a diamond-shaped, oxo-bridged uranyl(V) dimer, [UVO2(LMes)]2 is seen, whereas in contrast, for UVIO2Cl(LF), only ligand reduction occurs. Computational modeling of these reactions shows that while ligand reduction followed by chloride dissociation occurs in both cases, ligand-to-metal electron transfer is favorable for UVIO2Cl(LMes) only, which subsequently facilitates uranyl(V) dimerization.

Exploring the Redox Properties of Bench-Stable Uranyl(VI) Diamido-Dipyrrin Complexes.

The uranyl complexes UO2(OAc)(L) and UO2Cl(L) of the redox-active, acyclic diamido-dipyrrin anion L- are reported and their redox properties explored. Because of the inert nature of the complexes toward hydrolysis and oxidation, synthesis of both the ligands and complexes was conducted under ambient conditions. Voltammetric, electron paramagnetic resonance spectroscopy, and density functional theory studies show that one-electron chemical reduction by the reagent CoCp2 leads to the formation of a dipyrrin radical for both complexes [Cp2Co][UO2(OAc)(L•)] and [Cp2Co][UO2Cl(L•)].

Simple Amides and Amines for the Synergistic Recovery of Rhodium from Hydrochloric Acid by Solvent Extraction.

The separation and isolation of many of the platinum group metals (PGMs) is currently achieved commercially using solvent extraction processes. The extraction of rhodium is problematic however, as a variety of complexes of the form [RhCln (H2 O)6-n ](n-3)- are found in hydrochloric acid, making it difficult to design a reagent that can extract all the rhodium. In this work, the synergistic combination of a primary amine (2-ethylhexylamine, LA ) with a primary amide (3,5,5-trimethylhexanamide, L1 ) is shown to extract over 85 % of rhodium from 4 M hydrochloric acid. Two rhodium complexes are shown to reside in the organic phase, the ion-pair [HLA ]3 [RhCl6 ] and the amide complex [HLA ]2 [RhCl5 (L1 )]; in the latter complex, the amide is tautomerized to its enol form and coordinated to the rhodium centre through the nitrogen atom. This insight highlights the need for ligands that target specific metal complexes in the aqueous phase and provides an efficient synergistic solution for the solvent extraction of rhodium.

Thermal and Photochemical Reduction and Functionalization Chemistry of the Uranyl Dication, [UVIO2]2.

The uranyl ion, [UVIO2]2+, possesses rigorously trans, strongly covalent, and chemically robust U-oxo groups. However, through the use of anaerobic reaction techniques, both one- and two-electron reductive functionalization of the uranyl oxo groups has been discovered and developed. Prior to 2010, this unusual reactivity centered around the reductive silylation of the uranyl ion which entailed conversion of the oxo ligands into siloxy ligands and reductive metalation of the uranyl oxo with Group 1 and f-block metals. This review surveys the large number of new examples of reductive functionalization of the uranyl ion that have been reported since 2010, including reductive borylation and alumination, metalation with d- or f-block metals, and new examples of reductive silylation. Other examples of oxo-group functionalization of [UVIO2]2+ that do not involve reduction, mainly with Group 1 cations, are also covered, along with new advances in the photochemistry of the uranyl(VI) ion that involve the transient formation of formally uranyl(V) [UVO2]+ ion.

Proton Chelating Ligands Drive Improved Chemical Separations for Rhodium.

Current methods for the extraction of rhodium carry the highest carbon footprint and worst pollution metrics of all of the elements used in modern technological applications. Improving upon existing methods is made difficult by the limited understanding of the molecular-level chemistry occurring in extraction processes, particularly in the hydrometallurgical separation step. While many of the precious metals can be separated by solvent extraction, there currently exist no commercial extractants for Rh. This is due to its complicated mixed speciation upon leaching into hydrochloric acid, which gives rise to difficulties in designing effective reagents for solvent extraction. Herein we show that the diamidoamine reagent N- n-hexylbis( N-methyl- N- n-octylethylamide)amine transports Rh(III) from aqueous HCl into an organic phase as the monoaquated dianion [RhCl5(H2O)]2- through the formation of an outer-sphere assembly; this assembly has been characterized by experimentation (slope analysis, FT-IR and NMR spectroscopy, EXAFS, SANS, and ESI-MS) and computational modeling. The paper demonstrates the importance of applying a broad range of techniques to obtain a convincing mode of action for the complex processes involved in anion recognition in the solution phase. A consistent and comprehensive understanding of how the ligand operates to achieve Rh(III) selectivity over the competitor anion Cl- has emerged. This knowledge will guide the design of extractants and thus offers promise for improving the sustainability of metal extraction from both traditional mining sources and the recycling of secondary source materials.

Uranyl to Uranium(IV) Conversion through Manipulation of Axial and Equatorial Ligands.

The controlled manipulation of the axial oxo and equatorial halide ligands in the uranyl dipyrrin complex, UO2Cl(L), allows the uranyl reduction potential to be shifted by 1.53 V into the range accessible to naturally occurring reductants that are present during uranium remediation and storage processes. Abstraction of the equatorial halide ligand to form the uranyl cation causes a 780 mV positive shift in the UV/UIV reduction potential. Borane functionalization of the axial oxo groups causes the spontaneous homolysis of the equatorial U-Cl bond and a further 750 mV shift of this potential. The combined effect of chloride loss and borane coordination to the oxo groups allows reduction of UVI to UIV by H2 or other very mild reductants such as Cp*2Fe. The reduction with H2 is accompanied by a B-C bond cleavage process in the oxo-coordinated borane.

Radical Relatives: Facile Oxidation of Hetero-Diarylmethene Anions to Neutral Radicals.

Furan and thiophene diarylmethenes are potential redox-active ligands for metal centers that could be exploited in the development of nontraditional, stoichiometric, and catalytic redox reactions. As such, we describe here the selective meso-deprotonations of dithiophene, difuran, and diimine-difuran diarylmethanes to form the π-conjugated anions, for which only the diimino-difuryl anion is truly isolable and studied by X-ray crystallography. In all cases, facile one-electron oxidation of these anions occurs, which allows the isolation of the neutral dithienyl and diimino-difuryl radicals. UV-Visible and time-dependent density functional theory studies reveal that the oxidation of the dithienyl anion to its radical is associated with an increase in the highest (singly) occupied molecular orbital-lowest unoccupied molecular orbital gap, evident through a hypsochromic shift of the main absorption band in the electronic spectrum, whereas oxidation of the diimino-difuryl anion causes only minor spectroscopic changes. Electrochemical studies support the stability of the radicals with respect to the anion, showing strongly negative oxidation potentials. The control of the redox activity of these diarylmethene carbanions through variation of the nature of the substituents, donor-atom, and the conjugated π-system and their potential as ligands for redox-inert metal centers makes them intriguing candidates as noninnocent partners for redox reactions.

Earth-Abundant Mixed-Metal Catalysts for Hydrocarbon Oxygenation.

The oxygenation of aliphatic and aromatic hydrocarbons using earth-abundant Fe and Cu catalysts and "green" oxidants such as hydrogen peroxide is becoming increasingly important to atom-economical chemical processing. In light of this, we describe that dinuclear CuII complexes of pyrrolic Schiff-base macrocycles, in combination with ferric chloride (FeCl3), catalyze the oxygenation of π-activated benzylic substrates with hydroperoxide oxidants at room temperature and low loadings, representing a novel design in oxidation catalysis. Mass spectrometry and extended X-ray absorption fine structure analysis indicate that a cooperative action between CuII and FeIII occurs, most likely because of the interaction of FeCl3 or FeCl4- with the dinuclear CuII macrocycle. Voltammetric measurements highlight a modulation of both CuII and FeIII redox potentials in this adduct, but electron paramagnetic resonance spectroscopy indicates that any Cu-Fe intermetallic interaction is weak. High ketone/alcohol product ratios, a small reaction constant (Hammett analysis), and small kinetic isotope effect for H-atom abstraction point toward a free-radical reaction. However, the lack of reactivity with cyclohexane, oxidation of 9,10-dihydroanthracene, oxygenation by the hydroperoxide MPPH (radical mechanistic probe), and oxygenation in dinitrogen-purge experiments indicate a metal-based reaction. Through detailed reaction monitoring and associated kinetic modeling, a network of oxidation pathways is proposed that includes "well-disguised" radical chemistry via the formation of metal-associated radical intermediates.

Triggering Redox Activity in a Thiophene Compound: Radical Stabilization and Coordination Chemistry.

The synthesis, metalation, and redox properties of an acyclic bis(iminothienyl)methene L- are presented. This π-conjugated anion displayed pronounced redox activity, undergoing facile one-electron oxidation to the acyclic, metal-free, neutral radical L. on reaction with FeBr2 . In contrast, the reaction of L- with CuI formed the unique, neutral Cu2 I2 (L. ) complex of a ligand-centered radical, whereas reaction with the stronger oxidant AgBF4 formed the metal-free radical dication L.2+ .

Axially Symmetric U-O-Ln- and U-O-U-Containing Molecules from the Control of Uranyl Reduction with Simple f-Block Halides.

The reduction of UVI uranyl halides or amides with simple LnII or UIII salts forms highly symmetric, linear, oxo-bridged trinuclear UV /LnIII /UV , LnIII /UIV /LnIII , and UIV /UIV /UIV complexes or linear LnIII /UV polymers depending on the stoichiometry and solvent. The reactions can be tuned to give the products of one- or two-electron uranyl reduction. The reactivity and magnetism of these compounds are discussed in the context of using a series of strongly oxo-coupled homo- and heterometallic poly(f-block) chains to better understand fundamental electronic structure in the f-block.

Mono- and Dinuclear Macrocyclic Calcium Complexes as Platforms for Mixed-Metal Complexes and Clusters.

Mono- and dinuclear calcium complexes of the Schiff-base macrocycles H4L have been prepared and characterized spectroscopically and crystallographically. In the formation of Ca(THF)2(H2L(1)), Ca2(THF)2(µ-THF)(L(1)), and Ca2(THF)4(L(2)), the ligand framework adopts a bowl-shaped conformation instead of the conventional wedge, Pacman-shaped structure as seen with the anthracenyl-hinged complex Ca2(py)5(L(3)). The mononuclear calcium complex Ca(THF)2(H2L(1)) reacts with various equivalents of LiN(SiMe3)2 to form calcium/alkali metal clusters and dinuclear transition metal complexes when reacted subsequently with transition metal salts. The dinuclear calcium complex Ca2(THF)2(µ-THF)(L(1)), when reacted with various equivalents of NaOH, is shown to act as a platform for the formation of calcium/alkali metal hydroxide clusters, displaying alternate wedged and bowl-shaped conformations.

Inter- versus Intramolecular Structural Manipulation of a Dichromium(II) Pacman Complex through Pressure Variation.

The effect of pressure on the intranuclear M···M separation and intermolecular secondary interactions in the dinuclear chromium Pacman complex [Cr2(L)](C6H6) was evaluated because this compound contains both a short Cr···Cr separation and an exogenously bound molecule of benzene in the solid state. The electronic structure of [Cr2(L)] was determined by electron paramagnetic resonance spectroscopy, SQUID magnetometry, and density functional theory calculations and shows a diamagnetic ground state through antiferromagnetic exchange, with no evidence for a Cr-Cr bond. Analysis of the solid-state structures of [Cr2(L)](C6H6) at pressures varying from ambient to 3.0 GPa shows little deformation in the Cr···Cr separation, i.e., no Cr-Cr bond formation, but instead a significantly increased interaction between the exogenous arene and the chromium iminopyrrolide environment. It is therefore apparent from this analysis that [Cr2(L)] would be best exploited as a rigid chemical synthon, with pressure regulation being used to mediate the approach and secondary interactions of possible substrates.

A Comparison of the Selectivity of Extraction of [PtCl6](2-) by Mono-, Bi-, and Tripodal Receptors That Address Its Outer Coordination Sphere.

Extraction and binding studies of [PtCl6](2-) are reported for 24 mono-, bi-, and tripodal extractants containing tris(2-aminoethyl)amine (TREN) or tris(3-aminopropyl)amine (TRPN) scaffolds. These reagents are designed to recognize the outer coordination sphere of [PtCl6](2-) and to show selectivity over chloride anion under acidic conditions. Extraction from 0.6 M HCl involves protonation of the N-center in tertiary amines containing one, two, or three urea, amide, or sulfonamide hydrogen-bond donors to set up the following equilibrium: 2L(org) + 2H(+) + [PtCl6](2-) ⇌ [(LH)2PtCl6](org). All reagents show higher Pt loading than trioctylamine, which was used as a positive control to represent commercial trialkylamine reagents. The loading of [PtCl6](2-) depends on the number of pendant amides in the extractant and follows the order tripodal > bipodal > monopodal, with urea-containing extractants outperforming amide and sulfonamide analogues. A different series of reagents in which one, two, or three of the alkyl groups in tris-2-ethylhexylamine are replaced by 3-N'-hexylpropanamide groups all show a comparably high affinity for [PtCl6](2-) and high selectivity over chloride anion in extractions from aqueous acidic solutions. (1)H NMR titration of three extractants [LH·Cl] with [(Oct4N)2PtCl6] in CDCl3 provides evidence for high selectivity for [PtCl6](2-) over chloride for tri- and bipodal extractants, which show higher binding constants than a monopodal analogue.

A Simple Primary Amide for the Selective Recovery of Gold from Secondary Resources.

Waste electrical and electronic equipment (WEEE) such as mobile phones contains a plethora of metals of which gold is by far the most valuable. Herein a simple primary amide is described that achieves the selective separation of gold from a mixture of metals typically found in mobile phones by extraction into toluene from an aqueous HCl solution; unlike current processes, reverse phase transfer is achieved simply using water. Phase transfer occurs by dynamic assembly of protonated and neutral amides with [AuCl4 ](-) ions through hydrogen bonding in the organic phase, as shown by EXAFS, mass spectrometry measurements, and computational calculations, and supported by distribution coefficient analysis. The fundamental chemical understanding gained herein should be integral to the development of metal-recovery processes, in particular through the use of dynamic assembly processes to build complexity from simplicity.

Subtle Interactions and Electron Transfer between U(III) , Np(III) , or Pu(III) and Uranyl Mediated by the Oxo Group.

A dramatic difference in the ability of the reducing An(III) center in AnCp3 (An=U, Np, Pu; Cp=C5 H5 ) to oxo-bind and reduce the uranyl(VI) dication in the complex [(UO2 )(THF)(H2 L)] (L="Pacman" Schiff-base polypyrrolic macrocycle), is found and explained. These are the first selective functionalizations of the uranyl oxo by another actinide cation. At-first contradictory electronic structural data are explained by combining theory and experiment. Complete one-electron transfer from Cp3 U forms the U(IV) -uranyl(V) compound that behaves as a U(V) -localized single molecule magnet below 4 K. The extent of reduction by the Cp3 Np group upon oxo-coordination is much less, with a Np(III) -uranyl(VI) dative bond assigned. Solution NMR and NIR spectroscopy suggest Np(IV) U(V) but single-crystal X-ray diffraction and SQUID magnetometry suggest a Np(III) -U(VI) assignment. DFT-calculated Hirshfeld charge and spin density analyses suggest half an electron has transferred, and these explain the strongly shifted NMR spectra by spin density contributions at the hydrogen nuclei. The Pu(III) -U(VI) interaction is too weak to be observed in THF solvent, in agreement with calculated predictions.

Control of oxo-group functionalization and reduction of the uranyl ion.

Uranyl complexes of a large, compartmental N8-macrocycle adopt a rigid, "Pacman" geometry that stabilizes the U(V) oxidation state and promotes chemistry at a single uranyl oxo-group. We present here new and straightforward routes to singly reduced and oxo-silylated uranyl Pacman complexes and propose mechanisms that account for the product formation, and the byproduct distributions that are formed using alternative reagents. Uranyl(VI) Pacman complexes in which one oxo-group is functionalized by a single metal cation are activated toward single-electron reduction. As such, the addition of a second equivalent of a Lewis acidic metal complex such as MgN″2 (N″ = N(SiMe3)2) forms a uranyl(V) complex in which both oxo-groups are Mg functionalized as a result of Mg-N bond homolysis. In contrast, reactions with the less Lewis acidic complex [Zn(N″)Cl] favor the formation of weaker U-O-Zn dative interactions, leading to reductive silylation of the uranyl oxo-group in preference to metalation. Spectroscopic, crystallographic, and computational analysis of these reactions and of oxo-metalated products isolated by other routes have allowed us to propose mechanisms that account for pathways to metalation or silylation of the exo-oxo-group.

EPR/ENDOR and Computational Study of Outer Sphere Interactions in Copper Complexes of Phenolic Oximes.

Copper complexes of the phenolic oxime family of ligands (3-X-salicylaldoximes) are used extensively as metal solvent extractants. Incorporation of electronegative substituents in the 3-position, ortho to the phenol group, can be used to buttress the interligand H-bonding, leading to an enhancement in extractant strength. However, investigation of the relevant H-bonding in these complexes can be exceedingly difficult. Here, we have combined EPR, ENDOR, DFT, and X-ray crystallography to study this effect. Analysis of the (1)H ENDOR data revealed a variation in the Cu···H(16) (oxime proton) distance from 2.92 Å for the unsubstituted complex [Cu(L(2))2] to 3.65 Å for the X = CH2N(C6H13)2 substituted complex [Cu(L(3))2]. DFT calculations showed that this variation is caused by changes to the length and strength of the H-bond between the oximic hydrogen and the phenolate oxygen. Noticeable changes to the Cu···H(15) (azomethine proton) distances and the Cu···N bonding parameters were also observed in the two complexes, as revealed through the (N)A and (N)Q ENDOR data. Distortions in the structure of the complex and variations in the oximic proton to phenolate oxygen H-bond strength caused by the substituent (X) were confirmed by DFT and X-ray crystallography. DFT directly evidenced the importance of the interaction between H(16) and the amine nitrogen of CH2N(C6H13)2 in the buttressed complex and indicated that the high strength of this interaction may not necessarily lead to an enhancement of copper extraction, as it can impose an unfavorable geometry in the inner coordination sphere of the complex. Therefore, ENDOR, DFT, and X-ray structural data all indicate that the aminomethyl substituent (X) ortho to the phenolic oxygen atom provides a particularly strong buttressing of interligand H-bonding in these copper complexes and that these outer sphere interactions can significantly influence structure and stability.

Anion Receptor Design: Exploiting Outer-Sphere Coordination Chemistry To Obtain High Selectivity for Chloridometalates over Chloride.

High anion selectivity for PtCl6(2-) over Cl(-) is shown by a series of amidoamines, R(1)R(2)NCOCH2CH2NR(3)R(4) (L1 with R(1) = R(4) = benzyl and R(2) = R(3) = phenyl and L3 with R(1) = H, R(2) = 2-ethylhexyl, R(3) = phenyl and R(4) = methyl), and amidoethers, R(1)R(2)NCOCH2CH2OR(3) (L5 with R(1) = H, R(2) = 2-ethylhexyl and R(3) = phenyl), which provide receptor sites which extract PtCl6(2-) preferentially over Cl(-) in extractions from 6 M HCl solutions. The amidoether receptor L5 was found to be a much weaker extractant for PtCl6(2-) than its amidoamine analogues. Density functional theory calculations indicate that this is due to the difficulty in protonating the amidoether to generate a cationic receptor, LH(+), rather than the latter showing weaker binding to PtCl6(2-). The most stable forms of the receptors, LH(+), contain a tautomer in which the added proton forms an intramolecular hydrogen bond to the amide oxygen atom to give a six-membered proton chelate. Dispersion-corrected DFT calculations appear to suggest a switch in ligand conformation for the amidoamine ligands to an open tautomer state in the complex, such that the cationic N-H or O-H groups are also readily available to form hydrogen bonds to the PtCl6(2-) ion, in addition to the array of polarized C-H bonds. The predicted difference in energies between the proton chelate and nonchelated tautomer states for L1 is small, however, and the former is found in the X-ray crystal structure of the assembly [(L1H)2PtCl6]. The DFT calculations and the X-ray structure indicate that all LH(+) receptors present an array of polarized C-H groups to the large, charge diffuse PtCl6(2-) anion resulting in high selectivity of extraction of PtCl6(2-) over the large excess of chloride.