Analysis of China's PM2.5 and ozone coordinated control strategy based on the observation data from 2015 to 2020.

The coordinated control of PM2.5 and ozone has become the strategic goal of national air pollution control. Considering the gradual decline in PM2.5 concentration and the aggravation of ozone pollution, a better understanding of the coordinated control of PM2.5 and ozone is urgently needed. Here, we collected and sorted air pollutant data for 337 cities from 2015 to 2020 to explore the characteristics of PM2.5 and ozone pollution based on China's five major air pollution regions. The results show that it is necessary to continue to strengthen the emission reduction in PM2.5 and ozone precursors, and control NOx and VOCs while promoting a dramatic emission reduction in PM2.5. The primary method of curbing ozone pollution is to strengthen the emission control of VOCs, with a long-term strategy of achieving substantial emission reductions in NOx, because VOCs and NOx are also precursors to PM2.5; hence, their reductions also contribute to the reduction in PM2.5. Therefore, the implementation of a multipollutant emission reduction control strategy aimed at the prevention and control of PM2.5 and ozone pollution is the only means to realize the coordinated control of PM2.5 and ozone.

Insights into the Peroxide-Bicyclic Intermediate Pathway of Aromatic Photooxidation: Experimental Yields and NOx-Dependency of Ring-Opening and Ring-Retaining Products.

Aromatic hydrocarbons are important contributors to the formation of ozone and secondary organic aerosols in urban environments. The different parallel pathways in aromatic oxidation, however, remain inadequately understood. Here, we investigated the production yields and chemical distributions of gas-phase tracer products during the photooxidation of alkylbenzenes at atmospheric OH levels with NOx present using high-resolution mass spectrometers. The peroxide-bicyclic intermediate pathway emerged as the major pathway in aromatic oxidation, accounting for 52.1 ± 12.6%, 66.1 ± 16.6%, and 81.4 ± 24.3% of the total OH oxidation of toluene, m-xylene, and 1,3,5-trimethylbenzene, respectively. Notably, the yields of bicyclic nitrates produced from the reactions of bicyclic peroxy radicals (BPRs) with NO were considerably lower (3-5 times) than what the current mechanism predicted. Alongside traditional ring-opening products formed through the bicyclic pathway (dicarbonyls and furanones), we identified a significant proportion of carbonyl olefinic acids generated via the 1,5-aldehydic H-shift occurring in subsequent reactions of BPRs + NO, contributing 4-7% of the carbon flow in aromatic oxidation. Moreover, the observed NOx-dependencies of ring-opening and ring-retaining product yields provide insights into the competitive nature of reactions involving BPRs with NO, HO2, and RO2, which determine the refined product distributions and offer an explanation for the discrepancies between the experimental and model-based results.

Secondary Production of Gaseous Nitrated Phenols in Polluted Urban Environments.

Nitrated phenols (NPs) are important atmospheric pollutants that affect air quality, radiation, and health. The recent development of the time-of-flight chemical ionization mass spectrometer (ToF-CIMS) allows quantitative online measurements of NPs for a better understanding of their sources and environmental impacts. Herein, we deployed nitrate ions as reagent ions in the ToF-CIMS and quantified six classes of gaseous NPs in Beijing. The concentrations of NPs are in the range of 1 to 520 ng m-3. Nitrophenol (NPh) has the greatest mean concentration. Dinitrophenol (DNP) shows the greatest haze-to-clean concentration ratio, which may be associated with aqueous production. The high concentrations and distinct diurnal profiles of NPs indicate a strong secondary formation to overweigh losses, driven by high emissions of precursors, strong oxidative capacity, and high NOx levels. The budget analysis on the basis of our measurements and box-model calculations suggest a minor role of the photolysis of NPs (<1 ppb h-1) in producing OH radicals. NPs therefore cannot explain the underestimated OH production in urban environments. Discrepancies between these results and the laboratory measurements of the NP photolysis rates indicate the need for further studies aimed at understanding the production and losses of NPs in polluted urban environments.

All-fiber mode-locked ytterbium-doped fiber laser with a saturable absorber based on the nonlinear Kerr beam cleanup effect.

We theoretically and experimentally demonstrate a novel, to the best of our knowledge, mode-locked ytterbium-doped fiber laser with a saturable absorber based on the nonlinear Kerr beam cleanup effect. The saturable absorber was formed by a 2-m graded-index multimode fiber, and a single-mode fiber segment served as a diaphragm. With an all-normal-dispersion-fiber configuration, the laser generated dissipative soliton pulses with pulse duration of 26.38 ps and pulse energy more than 0.25 nJ; output pulses could be compressed externally to 615.7 fs. Moreover, the self-starting mode-locking operation of this laser exhibited a high stability with a measured signal-to-noise ratio of 73.4 dB in the RF spectrum.

Enhancement in Particulate Organic Nitrogen and Light Absorption of Humic-Like Substances over Tibetan Plateau Due to Long-Range Transported Biomass Burning Emissions.

To elucidate the influence of long-range transported biomass burning organic aerosols (BBOA) on the Tibetan Plateau, the molecular compositions and light absorption of HUmic-Like Substances (HULIS), major fractions of brown carbon, were characterized during the premonsoon season. Under the significant influence of biomass burning, HULIS concentrations increased to as high as 26 times of the background levels, accounting for 54% of water-soluble organic carbon (WSOC) and 50% of organic carbon (OC). The light absorption of HULIS also enhanced up to 42 times of the background levels, contributing 61% of the WSOC absorption and 50% of OC absorption. Meanwhile, elevated nitrogen-containing compounds (NOCs) among HULIS were observed. The NOCs from fresh and aged BBOA were unambiguously identified on the molecular level, through comparing with the molecular compositions of NOCs from lab-controlled and field burning experiments. N-Heterocyclic bases represent major fractions in the reduced nitrogen compounds from fresh BBOA, and nitroaromatic compounds are important groups among the oxidized nitrogen compounds from aged BBOA. The nitrogen-containing compounds, including nitroaromatics and N-heterocyclic compounds, were also important chromophores, which contributed to the enhanced light absorption of extracted HULIS during biomass burning-influenced periods.

Potentially Important Contribution of Gas-Phase Oxidation of Naphthalene and Methylnaphthalene to Secondary Organic Aerosol during Haze Events in Beijing.

Naphthalene (Nap) and methylnaphthalene (MN) are the most abundant polycyclic aromatic hydrocarbons (PAHs) in atmosphere and have been proposed to be important precursors of anthropogenic secondary organic aerosol (SOA) derived from laboratory chamber experiments. In this study, atmospheric Nap/MN and their gas-phase photooxidation products were quantified by a Proton Transfer Reaction-Quadrupole interface Time-of-Flight Mass Spectrometer (PTR-QiTOF) during the 2016 winter in Beijing. Phthalic anhydride, a late generation product from Nap under high-NO x conditions, appeared to be more prominent than 2-formylcinnamaldehyde (early generation product), possibly due to more sufficient oxidation during the haze. 1,2-Phthalic acid (1,2-PhA), the hydrated form of phthalic anhydride, was capable of partitioning into aerosol phase and served as a tracer to explore the contribution of Nap to ambient SOA. The measured fraction in particle phase ( Fp) of 1,2-PhA averaged at 73 ± 13% with OA mass loadings of 52.5-87.8 µg/m3, lower than the value predicted by the absorptive partitioning model (100%). Using tracer product-based and precursor consumption-based methods, 2-ring PAHs (Nap and MN) were estimated to produce 14.9% (an upper limit) of the SOA formed in the afternoon during the wintertime haze, suggesting a comparable contribution of Nap and MN with monocyclic-aromatics on urban SOA formation.

Potential of secondary aerosol formation from Chinese gasoline engine exhaust.

Light-duty gasoline vehicles have drawn public attention in China due to their significant primary emissions of particulate matter and volatile organic compounds (VOCs). However, little information on secondary aerosol formation from exhaust for Chinese vehicles and fuel conditions is available. In this study, chamber experiments were conducted to quantify the potential of secondary aerosol formation from the exhaust of a port fuel injection gasoline engine. The engine and fuel used are common in the Chinese market, and the fuel satisfies the China V gasoline fuel standard. Substantial secondary aerosol formation was observed during a 4-5hr simulation, which was estimated to represent more than 10days of equivalent atmospheric photo-oxidation in Beijing. As a consequence, the extreme case secondary organic aerosol (SOA) production was 426±85mg/kg-fuel, with high levels of precursors and OH exposure. The low hygroscopicity of the aerosols formed inside the chamber suggests that SOA was the dominant chemical composition. Fourteen percent of SOA measured in the chamber experiments could be explained through the oxidation of speciated single-ring aromatics. Unspeciated precursors, such as intermediate-volatility organic compounds and semi-volatile organic compounds, might be significant for SOA formation from gasoline VOCs. We concluded that reductions of emissions of aerosol precursor gases from vehicles are essential to mediate pollution in China.

Investigation of carbonyl compound sources at a rural site in the Yangtze River Delta region of China.

Carbonyl compounds are important intermediates in atmospheric photochemistry, but their primary sources are still not understood well. In this work, carbonyls, hydrocarbons, and alkyl nitrates were continuously measured during November 2011 at a rural site in the Yangtze River Delta region of China. Mixing ratios of carbonyls and hydrocarbons showed large fluctuations during the entire measurement. The average level for total measured volatile organic compounds during the pollution episode from 25th to 27th November, 2011 was 91.6 ppb, about 7 times the value for the clean period of 7th-8th, November, 2011. To preliminarily identify toluene sources at this site, the emission ratio of toluene to benzene (T/B) during the pollution episode was determined based on photochemical ages derived from the relationship of alkyl nitrates to their parent alkanes. The calculated T/B was 5.8 ppb/ppb, significantly higher than the values of 0.2-1.7 ppb/ppb for vehicular exhaust and other combustion sources, indicating the dominant influence of industrial emissions on ambient toluene. The contributions of industrial sources to ambient carbonyls were then calculated using a multiple linear regression fit model that used toluene and alkyl nitrates as respective tracers for industrial emission and secondary production. During the pollution episode, 18.5%, 69.0%, and 52.9% of measured formaldehyde, acetaldehyde, and acetone were considered to be attributable to industrial emissions. The emission ratios relative to toluene for formaldehyde, acetaldehyde, and acetone were determined to be 0.10, 0.20 and 0.40 ppb/ppb, respectively. More research on industrial carbonyl emission characteristics is needed to understand carbonyl sources better.

Carbonyl emissions from heavy-duty diesel vehicle exhaust in China and the contribution to ozone formation potential.

Fifteen heavy-duty diesel vehicles were tested on chassis dynamometer by using typical heavy duty driving cycle and fuel economy cycle. The air from the exhaust was sampled by 2,4-dinitrophenyhydrazine cartridge and 23 carbonyl compounds were analyzed by high performance liquid chromatography. The average emission factor of carbonyls was 97.2 mg/km, higher than that of light-duty diesel vehicles and gasoline-powered vehicles. Formaldehyde, acetaldehyde, acetone and propionaldehyde were the species with the highest emission factors. Main influencing factors for carbonyl emissions were vehicle type, average speed and regulated emission standard, and the impact of vehicle loading was not evident in this study. National emission of carbonyls from diesel vehicles exhaust was calculated for China, 2011, based on both vehicle miles traveled and fuel consumption. Carbonyl emission of diesel vehicle was estimated to be 45.8 Gg, and was comparable to gasoline-powered vehicles (58.4 Gg). The emissions of formaldehyde, acetaldehyde and acetone were 12.6, 6.9, 3.8 Gg, respectively. The ozone formation potential of carbonyls from diesel vehicles exhaust was 537 mg O3/km, higher than 497 mg O3/km of none-methane hydrocarbons emitted from diesel vehicles.

Emission factors and source profiles of volatile organic compounds in container manufacturing industry.

The container manufacturing industry is the key contributor of industrial volatile organic compounds (VOCs). Emission factors (EFs) and source profiles of container manufacturing industry were comprehensively investigated basing on multiple VOCs discharge links. 17 samples were collected from a typical container manufacturing enterprise based on field measurements. The material balance method and weighted average method were applied to estimate EFs and establish VOCs source profiles. It is found that diluent use (DU) was the largest contributor (39.96 %), followed by intermediate painting spaying (IMPS), primer painting (PP), chassis painting (CP), exterior paint spaying (EPS), and interior paint spaying (IPS). EF of the container manufacturing industry (2.90 kg VOCs/ Twenty-foot Equivalent Units, TEU) was firstly estimated. EFs of six processes were further estimated. The EFs of DU, IMPS, PP, CP, EPS, and IPS were 1.22, 0.74, 0.42, 0.33, 0.20, and 0.00045 kg VOCs/TEU, respectively. EFs of six materials were further estimated. The EF of the diluent was largest (382.74 kg VOCs/t material), followed by water-based epoxy intermediate paint (132.09 kg VOCs/t material), organic-based epoxy zinc-rich priming paint (91.31 kg VOCs/t material). EFs of other paints ranged from 0.0047 to 43.01 kg VOCs/t material. These results suggest that the replacement of lower- VOCs- contained diluent and effective control from diluent consumption are dramatically conducive to VOCs reduction. Source profiles were established at the industry and individual process levels. Aromatics (77.05-98.38 %) were dominant components in all processes, followed by alkane and OVOCs. m/p-Xylene, o-xylene, and ethylbenzene were the key active species that should be prioritized for control. Overall, EFs and source profiles of the container manufacturing industry were firstly proposed, conducing to the systematic formulation of VOCs control strategies.

Emission factors and source profiles of volatile organic compounds from the automobile manufacturing industry.

Controlling volatile organic compounds (VOCs) emitted from the automobile manufacturing industry requires establishing VOCs emission factors (EFs) and source profiles refinedly. In this study, 41 samples involved 32 VOCs discharge links were collected from three factories. The EFs and VOCs source profiles were estimated by the material balance method and weighted average method, respectively. The ozone formation potential (OFP) of the 110 VOCs species were calculated by the maximum incremental reactivity (MIR). According to estimations, the ranges of EFs were 0.23-1.66 kg VOCs/SUV car and 2.14-14.86 g VOCs/m2 painted area. EFs of six materials were firstly estimated, which are electrophoretic primer (152.31 ± 97.39 g VOCs/SUV car, 0.97 ± 0.38 g VOCs/m2 painted area), sealant (48.39 ± 26.20 g VOCs/SUV car, 0.46 ± 0.25 g VOCs/m2 painted area), floating coat (87.40 ± 75.63 g VOCs/SUV car, 0.86 ± 0.74 g VOCs/m2 painted area), colored paint (127.24 ± 168.24 g VOCs/SUV car, 1.25 ± 1.66 g VOCs/m2 painted area), varnish (205.46 ± 218.14 g VOCs/SUV car, 2.01 ± 2.15 g VOCs/m2 painted area), and cleaning solvent (328.54 ± 404.94 g VOCs/SUV car, 3.23 ± 3.98 g VOCs/m2 painted area). OVOCs (37.40-51.60 %) and aromatics (36.40-37.00 %) were the dominant components. n-Butyl acetate, 1,2,4-trimethylbenzene, undecane, n-hexanal, acetone, 1,2,3-trimethylbenzene, 1,3,5 -trimethylbenzene, m/p/o-xylene, 3-ethylbenzene, and 4-ethylbenzene were the major VOCs species, accounting for 68 % of total VOCs in the automobile manufacturing industry. Considering the OFP values of species, 1,2,4-trimethylbenzene, 1,3,5-trimethylbenzene, 1,2,3-trimethylbenzene, m/p-xylene, acetaldehyde, methyl ethyl ketone are the key active species that should be prioritized for control.

Elucidating the unexpected importance of intermediate-volatility organic compounds (IVOCs) from refueling procedure.

Evaporative emissions release organic compounds comparable to gasoline exhaust in China. However, the measurement of intermediate volatility organic compounds (IVOCs) is lacking in studies focusing on gasoline evaporation. This study sampled organics from a real-world refueling procedure and analyzed the organic compounds using comprehensive two-dimensional gas chromatography coupled with a mass spectrometer (GC×GC-MS). The non-target analysis detected and quantified 279 organics containing 93 volatile organic compounds (VOCs, 64.9 ± 7.4 % in mass concentration), 182 IVOCs (34.9 ± 7.4 %), and 4 semivolatile organic compounds (SVOCs, 0.2 %). The refueling emission profile was distinct from that of gasoline exhaust. The b-alkanes in the B12 volatility bin are the most abundant IVOC species (1.9 ± 1.4 µg m-3) in refueling. A non-negligible contribution of 17.5 % to the ozone formation potential (OFP) from IVOCs was found. Although IVOCs are less in concentration, secondary organic aerosol potential (SOAP) from IVOCs (58.1 %) even exceeds SOAP from VOCs (41.6 %), mainly from b-alkane in the IVOC range. At the molecular level, the proportion of cyclic compounds in SOAP (12.1 %) indeed goes above its mass concentration (3.1 %), mainly contributed by cyclohexanes and cycloheptanes. As a result, the concentrations and SOAP of cyclic compounds (>50 %) could be overestimated in previous studies. Our study found an unexpected contribution of IVOCs from refueling procedures to both ozone and SOA formation, providing new insights into secondary pollution control policy.

Ozone sensitivity regimes vary at different heights in the planetary boundary layer.

The sensitivity of tropospheric ozone (O3) to its precursors volatile organic compounds (VOCs) and nitrogen oxides (NOX) determines the emission reduction strategy for O3 mitigation. Due to the lack of comprehensive vertical measurements of VOCs, the vertical distribution of O3 sensitivity regimes has not been well understood. O3 precursor sensitivity determined by ground-level measurements has been generally used to guide O3 control strategy. Here, to precisely diagnose O3 sensitivity regimes at different heights in the planetary boundary layer (PBL), we developed a vertical measurement system based on an unmanned aerial vehicle platform to conduct comprehensive vertical measurements of VOCs, NOX and other relevant parameters. Our results suggest that the O3 precursor sensitivity shifts from a VOC-limited regime at the ground to a NOX-limited regime at upper layers, indicating that the ground-level O3 sensitivity cannot represent the situation of the whole PBL. We also found that the state-of-the-art photochemical model tends to underestimate oxygenated VOCs at upper layers, resulting in overestimation of the degree of VOCs-limited regime. Therefore, thorough vertical measurements of VOCs to accurately diagnose O3 precursor sensitivity is in urgent need for the development of effective O3 control strategies.

Particulate organic emissions from incense-burning smoke: Chemical compositions and emission characteristics.

Incense burning is a common practice in Asian cultures, releasing hazardous particulate organics. Inhaling incense smoke can result in adverse health effects, yet the molecular compositions of incense-burning organics have not been well investigated due to the lack of measurement of intermediate-volatility and semi-volatile organic compounds (I/SVOCs). To elucidate the detailed emission profile of incense-burning particles, we conducted a non-target measurement of organics emitted from incense combustion. Quartz filters were utilized to trap particles, and organics were analyzed by a comprehensive two-dimensional gas chromatography-mass spectrometer (GC × GC-MS) coupled with a thermal desorption system (TDS). To deal with the complex data obtained by GC × GC-MS, homologs are identified mainly by the combination of selected ion chromatograms (SICs) and retention indexes. SICs of 58, 60, 74, 91, and 97 were utilized to identify 2-ketones, acids, fatty acid methyl esters, fatty acid phenylmethyl esters, and alcohols, respectively. Phenolic compounds contribute the most to emission factors (EFs) among all chemical classes, taking up 24.5 % ± 6.5 % of the total EF (96.1 ± 43.1 µg g-1). These compounds are largely derived from the thermal degradation of lignin. Biomarkers like sugars (mainly levoglucosan), hopanes, and sterols are extensively detected in incense combustion fumes. Incense materials play a more important role in shaping emission profiles than incense forms. Our study provides a detailed emission profile of particulate organics emitted from incense burning across the full-volatility range, which can be used in the health risk assessments. The data processing procedure in this work could also benefit those with less experience in non-target analysis, especially GC × GC-MS data processing.

Addressing new chemicals of emerging concern (CECs) in an indoor office.

Indoor pollutants change over time and place. Exposure to hazardous organics is associated with adverse health effects. This work sampled gaseous organics by Tenax TA tubes in two indoor rooms, i.e., an office set as samples, and the room of chassis dynamometer (RCD) set as backgrounds. Compounds are analyzed by a thermal desorption comprehensive two-dimensional gas chromatography-quadrupole mass spectrometer (TD-GC × GC-qMS). Four new chemicals of emerging concern (CECs) are screened in 469 organics quantified. We proposed a three-step pipeline for CECs screening utilizing GC × GC including 1) non-target scanning of organics with convincing molecular structures and quantification results, 2) statistical analysis between samples and backgrounds to extract useful information, and 3) pixel-based property estimation to evaluate the contamination potential of addressed chemicals. New CECs spotted in this work are all intermediate volatility organic compounds (IVOCs), containing mintketone, isolongifolene, ß-funebrene, and (5α)-androstane. Mintketone and sesquiterpenes may be derived from the use of volatile chemical products (VCPs), while (5α)-androstane is probably human-emitted. The occurrence and contamination potential of the addressed new CECs are reported for the first time. Non-target scanning and the measurement of IVOCs are of vital importance to get a full glimpse of indoor organics.

Investigation of partition coefficients and fingerprints of atmospheric gas- and particle-phase intermediate volatility and semi-volatile organic compounds using pixel-based approaches.

Ambient gas- and particle-phase intermediate volatility and semi-volatile organic compounds (I/SVOCs) of Beijing were analyzed by a thermal desorption comprehensive two-dimensional gas chromatography quadrupole mass spectrometry (TD-GC × GC-qMS). A pixel-based scheme combing the integration-based approach was applied for partition coefficients estimation and fingerprints identification. Blob-by-blob recognition was firstly utilized to characterize I/SVOCs from the molecular level. 412 blobs in gas-phase and 460 blobs in particle-phase were resolved, covering a total response of 47.5% and 43.5%. A large pool of I/SVOCs was found with a large diversity of chemical classes in both gas- and particle-phase. Acids (8.5%), b-alkanes (5.8%), n-alkanes (C8-C25, 5.3%), and aromatics (4.4%) were dominant in gas-phase while esters (7.0%, including volatile chemical product compounds, VCPs), n-alkanes (C9-C34, 5.7%), acids (4.6%), and siloxanes (3.6%) were abundant in particle-phase. Air pollutants were then evaluated by a two-parameter linear free energy relationship (LFER) model, which could be further implemented in the two-dimensional volatility basis set (2D-VBS) model. Multiway principal component analysis (MPCA) and partial least squares-discriminant analysis (PLS-DA) implied that naphthalenes, phenol, propyl-benzene isomers, and oxygenated volatile organic compounds (OVOCs) were key components in the gas-phase under different pollution levels. This work gives more insight into property estimation and fingerprints identification for complex ambient samples.

Field observations and quantifications of atmospheric formaldehyde partitioning in gaseous and particulate phases.

Formaldehyde (HCHO) can possibly be taken by atmospheric particles due to its moderate solubility. Although previous model studies have proposed that uptake by particles was a large sink for HCHO, direct observation of HCHO partitioning and estimation of HCHO uptake coefficient (γ) for tropospheric conditions are still limited. In this work, online measurements of gaseous HCHO (HCHOg) and particulate HCHO (HCHOp) were carried out simultaneously at an urban site in Beijing in winter and spring. The results indicated that the average concentrations of HCHOp ranged from 0.15 to 0.4 µg m-3, accounting for 1.2% to 10% of the total HCHO (i.e., HCHOg + HCHOp). The median values of estimated γ based on the measured data were in the range of about 1.09 ∗ 10-5-2.42 ∗ 10-4, with lower values during PM2.5 pollution episodes. Besides, the pH and liquid water content of aerosols that are mainly determined by ambient relative humidity (RH) and inorganic salt composition were identified as the main influencing factors of γ. We propose that the HCHO uptake process was mainly driven by hydrone and hydrogen ions in particles.

Volatile organic compound (VOC) emissions and health risk assessment in paint and coatings industry in the Yangtze River Delta, China.

Solvent use and paint consumption are significant source sectors of volatile organic compounds (VOCs) emissions in China. The occupational painters have high risk of health effect due to exposure to high VOCs concentration. However, the toxic components in coating environment have not been carefully identified, and the health risks of VOCs exposure have not been sufficiently assessed. This study collected air samples from nine workshops of three major coating sectors in the Yangtze River Delta of China, namely cargo container coating, ship equipment coating, and furniture coating, to evaluate the non-cancer and cancer risk of toxic VOCs exposure to occupational painters under a normal working condition. The results show that the container coating had highest cancer risk (2.29 × 10-6-5.53 × 10-6) exceeding the safe limit of 1.0 × 10-6, while non-cancer risk of all workshops was lower than acceptable level of 1. Ethylbenzene and 1,2-dichloropropane should be targeted for priority removal during the container coating process in attempt to reduce adverse health effect on the occupational painters. This study helps better understand the health risk of VOCs exposure in coating workshops in China and provides information for policy-makers to formulate possible control of specific toxic compounds during coating process.

Source profiles, emission factors and associated contributions to secondary pollution of volatile organic compounds (VOCs) emitted from a local petroleum refinery in Shandong.

An in-depth study was conducted to quantify and characterize VOC emissions from a petroleum refinery located in Shandong, China. The VOC emission inventory established in this study showed that storage tanks were the largest emission source, accounting for 56.4% of total emissions, followed by loading operations, wastewater collection and treatment system, process vents, and equipment leaks. Meanwhile, the localization factors for refining, storage tanks and loading operations were calculated, which were 1.33, 0.75 and 0.31g VOCs/kg crude oil refined. Furthermore, the characteristics of fugitive and organized emissions were determined for various processes and emission sources using a gas chromatography-mass spectrometry/flame ionization detection (GC-MS/FID) system. Most samples contained mainly alkanes, but the total VOC concentrations and key species varied greatly among processes. The source profile of the refinery, synthesized using the weighted average method, indicated that cis-2-butene (14.5%), n-pentane (10.2%), n-butane (7.4%), isopentane (6.5%) and MTBE (5.9%) were the major species released by this refinery. Assessment of O3 and secondary organic aerosol formation potentials were completed, and the results indicated that cis-2-butene, m/p-xylene, toluene, n-pentane, isopentane, benzene, o-xylene and ethylbenzene were the active species for which treatment should be prioritized.

Research on accounting and detection of volatile organic compounds from a typical petroleum refinery in Hebei, North China.

A volatile organic compound (VOC) emissions inventory of the petroleum refinery in Hebei was established. This refinery emits 1859.2 tons of VOCs per year, with wastewater collection and treatment system being the largest emissions source, accounting for 59.6% individually, followed by the recirculating cooling water system (13.4%), storage tanks (11.1%), and equipment leaks (9.4%). Organized and fugitive samples were collected simultaneously for different processes of each emissions source. A total of 100 VOC species were characterized and quantified using a gas chromatography-mass spectrometry/flame ionization detection system. The VOC emissions concentrations and chemical composition of each process were quite different. Most of the processes used alkanes as the main chemome. We concluded from the composite source profile weighted by the amount of VOC emissions that the characteristic species of this petroleum refinery were ethane (15.4%), propylene (11.7%), propane (8.5%), iso-pentane (8.3%), and toluene (4.7%). The ozone (O3) formation potential (OFP) and secondary organic aerosol formation potential (SOAP) were evaluated, and the results indicated that alkenes (mainly propylene) and aromatics (mainly toluene) were the priority control compounds. This study clarifies the current status of VOC emissions in the refinery in terms of emissions intensity, emissions components, and O3 and SOA reactivity. The key emissions sources and species screened provide scientific support for reducing refined emissions from the petrochemical industry.