Impact of Apparatus and Adapter on In vitro Drug Release of Ophthalmic Semisolid Drug Products.

PURPOSE: In vitro release testing (IVRT) is a widely used tool for evaluating the quality and performance of drug products. However, standardized sample adaptors or drug release apparatus setups for IVRT studies are still lacking for ophthalmic ointments. The aim of this study was to provide a better understanding of the impact of apparatus and sample adaptor setups on IVRT of ophthalmic ointments. METHODS: Dexamethasone (DEX), a steroidal ingredient commonly used in ophthalmic drug products, was selected as a model drug. Ointments were prepared by mixing DEX in white petrolatum using a high shear mixer. A novel two-sided adapter was developed to increase the drug release surface area. DEX ointment was placed in one-sided or two-sided release adaptors coupled with 1.2 µm polyethersulfone membrane, and the drug release was studied in different USP apparatuses (I, II, and IV). RESULTS: The sample adaptor setups had a minimal impact on cumulative drug release amount per area or release rate while USP IV apparatus with agitated flow enhanced drug release rates. The USP apparatus I with a two-sided semisolid adapter, which uses membranes on both sides, showed dramatically higher cumulative drug release and discriminative release profiles when evaluating ophthalmic formulations. CONCLUSIONS: USP apparatuses and sample adaptors are critical considerations for IVRT. Two-sided semisolid adapter provides higher cumulative release, facilitating the discrimination between low drug content ophthalmic ointment formulations with good sensitivity and repeatability without affecting the drug release rate.

Stealth oxime ether lipid vesicles promote delivery of functional DsiRNA in human lung cancer A549 tumor bearing mouse xenografts.

We previously reported that hydroxylated oxime ether lipids (OELs) efficiently deliver functional Dicer substrate siRNAs (DsiRNAs) in cells. Here, we explored in vivo utility of these OELs, using OEL4 as a prototype and report that surface modification of the OEL4 formulations was essential for their in vivo applications. These surface-modified OEL4 formulations were developed by inclusion of various PEGylated lipids. The vesicle stability and gene knock-down were dependent on the PEG chain length. OEL4 containing DSPE-PEG350 and DSPE-PEG1000 (surprisingly not DSPE2000) promoted gene silencing in cells. In vivo studies demonstrated that OEL4 vesicles formulated using 3 mol% DSPE-PEG350 accumulate in human lung cancer (A549-luc2) xenografts in mice and exhibit a significant increase in tumor to liver ratios. These vesicles also showed a statistically significant reduction of luciferase signal in tumors compared to untreated mice. Taken together, the scalable OEL4:DSPE-PEG350 formulation serves as a novel candidate for delivery of RNAi therapeutics.

Stabilization and X-ray Attenuation of PEGylated Cholesterol/Polycaprolactone-Based Perfluorooctyl Bromide Nanocapsules for CT Imaging.

Contrast-enhanced X-ray computed tomography plays an important role in cancer imaging and disease progression monitoring. Imaging using radiopaque nanoparticle platforms can provide insights on the likelihood of nanoparticle accumulation and can enable image-guided therapies. Perfluorooctyl bromide (PFOB)-loaded nanocapsules designed for this purpose were stabilized using an in-house synthesized PEGylated polycaprolactone-based copolymer (PEG-b-PCL(Ch)) and compared with commercial polycaprolactone employing a Quality-by-Design approach. PFOB is a dense liquid, weakly polarizable, and immiscible in organic and aqueous solvents; thus, carefully designed formulations for optimal colloidal stabilization to overcome settling-associated instability are required. PFOB-loaded nanocapsules exhibited high PFOB loading due to the intrinsic properties of PEG-b-PCL(Ch). Settling and caking are major sources of instability for PFOB formulations. However, the PEG-b-PCL(Ch) copolymer conferred the nanocapsules enough steric impediment and polymer shell elasticity to settle without significant caking, increasing the overall colloidal stability of the formulation. Furthermore, a clear relationship between nanocapsule physical properties and X-ray attenuation was established. Nanocapsules were able to enhance the X-ray contrast in vitro as a function of PFOB loading. This nanocapsule-based platform is promising for future translational studies and image-guided tumor therapy due to its enhanced contrastability and optimal colloidal stability.

Impact of Membranes on In Vitro Release Assessment: a Case Study Using Dexamethasone.

In vitro release studies are commonly used to assess the product performance of topical dosage forms. In such studies, the mass transport of drugs through synthetic membranes into a receiving chamber filled with a release medium is measured. The release medium is also passed through filtration membranes prior to chromatographic analysis. There are no official guidelines directing membrane selection for in vitro release studies or for filtration. Considering the diversity in membrane materials and their physical properties, the aim of this study was to investigate membrane-drug binding and the effect of various membranes on the release performance of a model drug dexamethasone (DEX) using USP dissolution apparatus IV. Seven membranes of different pore sizes (0.45 and 1.2 µm) and materials (cellulose acetate, polyethersulfone, and nylon) were assessed. Two different methods, syringe filter and 24-h incubation, were used for the determination of membrane-drug binding effects at low drug concentrations and saturated concentration conditions. Cellulose acetate and nylon membranes showed significant drug binding after 24-h incubations at both drug concentrations. DEX diffusion through membranes was significantly slowed down in all the tested membranes when compared with DEX solution without membranes. The extent of the retardation varied due to the differences in membrane structures. In conclusion, materials and sources of membranes affected drug dissolution profiles and the results showed membrane-drug binding effects. Proper selection of membranes with low drug binding ability and low diffusion resistance is essential to ensure appropriate and reproducible in vitro release assessments and filtration studies. Graphical Abstract.

Superstrong and Tough Hydrogel through Physical Cross-Linking and Molecular Alignment.

Hydrogels are attracting increasing attention due to their potential use in various fields. However, most of the existing hydrogels have limitations in either dissipating mechanical energy or maintaining high stretchability under deformation, thus do not possess high mechanical properties. Herein, poly(vinyl alcohol) (PVA)-tannic acid (TA) hydrogels with both high mechanical strength and stretchability were obtained via a step-by-step physical cross-linking and molecular alignment method. Saline-triggered physical interactions serve as "sacrifice domains" to dissipate energy and endow PVA-based hydrogel with high mechanical strength (≈16 MPa) and stretchability (≈1000%). Due to the reversible arranging and disassociating property of physical interactions, PVA-TA hydrogels show excellent shape memory performance. We further demonstrated an effective approach to fabricate strong and aligned PVA-TA thread. The resultant well-aligned PVA-TA dry thread reveals an ultrahigh mechanical tensile strength of up to 750 MPa, nearly 45 times higher than PVA-TA thread with no alignment. Wide-angle X-ray two-dimensional diffraction images further confirmed the alignment of PVA fibers in stretching direction. In addition, we applied the PVA-TA hydrogel as suture and evaluated the cytotoxicity and biocompatibility of the PVA-TA suture.

Influence of Manufacturing Process Variables on the Properties of Ophthalmic Ointments of Tobramycin.

PURPOSE: The main purpose of this study was to evaluate qualitative (Q1) and quantitative (Q2) equivalent oleaginous ophthalmic ointments of tobramycin (TOB) with different physicochemical properties and identify critical process/quality attributes using various in vitro methods of characterization. METHODS: Various sources of petrolatum and TOB, and two mixing methods were employed to generate Q1/Q2 equivalent ointments. Characterization studies included content uniformity, microscopy, modulated temperature differential scanning calorimetry (MTDSC), gas chromatography-mass spectrometry (GC/MS), thermogravimetric analysis (TGA) and rheology. RESULTS: The particle size distribution of TOB influenced the content uniformity of ointments. Differences in the MTDSC endothermic and exothermic peaks of TOB suggested the presence of different polymorphic forms. GC/MS revealed variations in the composition and distribution of linear and branched hydrocarbons of petrolatums. Differences were also observed in the TGA derivative weight loss peaks demonstrating differences in the composition of petrolatum that may be the source of the observed variations in the rheological parameters of the ointments. CONCLUSIONS: Source and composition of the petrolatum played a more critical role in determining the rheological properties compared to the method of preparation. Results demonstrated the impact of the source of TOB, excipients and manufacturing processes on the quality attributes of TOB ophthalmic ointments.

Impact of Porous Excipients on the Manufacturability and Product Performance of Solid Self-Emulsifying Drug Delivery Systems.

FDA-approved self-emulsifying medicines rely on liquid-based formulations, which can exhibit limited stability and short shelf-lives. Solid self-emulsifying drug delivery systems (SEDDS) can improve such issues, but there is still a great need for identifying suitable porous carriers to convert liquid SEDDS into solids without impairing their mechanical properties, functionality, and industrial feasibility. The impact of SEDDS adsorption on tableting is also poorly understood. Therefore, solid SEDDS were prepared by adsorbing liquid SEDDS onto ten commercially available porous excipients. Products were assessed with respect to mechanical behavior, tabletability, and product performance. Adsorbing SEDDS onto porous excipients led to satisfactory stability, with the exception of Zeopharm® 600 due to its high alkalinity, and Neusilin® US2/UFL2, which caused quercetin to crystallize out of the liquid concentrate. SEDDS adsorption reduced the elastic recovery of most excipients, making tableting achievable using Aeroperl® 300 and Aerosil® 200/300. The impact of SEDDS on elastic recovery provides additional understanding on solid SEDDS manufacture process. Acceptable tablets were made via direct compression but with slow disintegration. Addition of a superdisintegrant (crospovidone 5% w/w) ensured tablet manufacturing without impairment of product performance. Solid SEDDS displayed several technical advantages over their liquid counterparts, but attention must be given to the properties of the porous excipient chosen. Drug-excipient interactions play a significant role in drug degradation and crystallization in solid SEDDS. Improved mechanical behavior upon adsorption led to well-composed tablets that performed satisfactorily in vitro upon addition of a superdisintegrant. This study provides an insight on excipient-oriented rational development of solid SEDDS.

ESC-derived thymic epithelial cells expressing MOG prevents EAE by central and peripheral tolerance mechanisms.

Experimental autoimmune encephalomyelitis (EAE) is an animal model for multiple sclerosis (MS), and is induced by immunization with disease-causative self-antigens such as myelin oligodendrocyte glycoprotein (MOG). We have previously reported that transplantation of MOG expressing thymic epithelial progenitors (TEPs) derived from 129S6SvEv Tac mouse embryonic stem cells (mESCs) prevented the development of EAE. In this study, we expand our previous studies to show that transplantation of MOG expressing mESC-TEPs derived from C57BL/6 mice also prevents EAE development. Furthermore, by using a MOG-specific T cell receptor (TCR) transgenic mouse model, we demonstrate that both central and peripheral tolerances are involved in the prevention of EAE induced by MOG expressing mESC-TEPs. Our results suggest that transplantation of human ESC-TEPs expressing MOG may provide an effective approach for the induction of MOG-specific immune tolerance, thereby the prevention and treatment of MS.

In-Situ Formation of Holmium Oxide in Pores of Mesoporous Carbon Nanoparticles as Substrates for Neutron-Activatable Radiotherapeutics.

Radionuclide therapy with nano-sized carriers is a very promising approach to treat various types of cancer. The preparation of radioactive nanocarriers can be achieved with minimum handling using a neutron-activation approach. However, the nanocarrier material must possess certain characteristics such as low density, heat-resistance, high metal adsorption, easy surface modification and low toxicity in order to be useful. Mesoporous Carbon Nanoparticles (MCNs) in which holmium oxide is formed in their pores by a wet-impregnation process are investigated as a suitable material for this application. Holmium (165Ho) has a natural abundance of 100% and possesses a large cross-section for capturing thermal neutrons. After irradiation of Ho-containing MCNs in a neutron flux, 166Ho, which emits therapeutic high energy beta particles as well as diagnostic low energy gamma photons that can be imaged externally, is produced. The wet impregnation process (16 w/w% Ho loading) is shown to completely prevent the leaching of radioactive holmium from the MCNs without compromising their structural integrity. In vitro studies showed that the MCNs containing non-radioactive holmium do not exhibit toxicity and the same formulation with radioactive holmium (166Ho) demonstrated a tumoricidal effect. Post-irradiation PEGylation of the MCN surfaces endows dispersibility and biocompatibility.

Recombinant IL-7/HGFß hybrid cytokine separates acute graft-versus-host-disease from graft-versus-tumour activity by altering donor T cell trafficking.

Given that donor T cells from a transplant contribute both the desired graft-versus-tumour (GVT) effect and detrimental graft-versus-host disease (GVHD), strategies to separate GVHD and GVT activity are a major clinical goal. We have previously demonstrated that in vivo administration of a recombinant (r)IL-7/HGFß hybrid cytokine, consisting of interleukin-7 (IL-7, IL7) and the ß-chain of hepatocyte growth factor (HGFß), significantly inhibits the growth of cancer cells in murine tumour models. The antit-umour effect of rIL-7/HGFß is related to a marked infiltration T cells in the tumour tissues. We have also shown that GVHD was not induced in rIL-7/HGFß-treated T cell-depleted allogeneic haematopoietic stem cell transplantation (HSCT) recipients. We show here that, in T cell-replete allogeneic HSCT murine models, rIL-7/HGFß attenuated acute GVHD (aGVHD), while promoting GVT activity. This was related to an alteration of donor T cell trafficking, with an increased infiltration of donor T cells into tumour tissues and the lympho-haematopoietic system but decreased number of the T cells in the GVHD target organs. Therefore, rIL-7/HGFß may offer a new tool to alleviate aGVHD while prompting GVT, and to study the molecular regulation of T cell trafficking.

Reduced in vivo toxicity of doxorubicin by encapsulation in cholesterol-containing self-assembled nanoparticles.

We previously reported the development of an amphiphilic brush-like block copolymer composed of polynorbornene-cholesterol/polyethylene glycol (P(NBCh9-b-NBPEG)) that self-assembles in aqueous media to form long circulating nanostructures capable of encapsulating doxorubicin (DOX-NPs). Biodistribution studies showed that this formulation preferentially accumulates in tumor tissue with markedly reduced accumulation in the heart and other major organs. The aim of the current study was to evaluate the in vivo efficacy and toxicity of DOX containing self-assembled polymer nanoparticles in a mouse xenograft tumor model and compare its effects with the hydrochloride non-encapsulated form (free DOX). DOX-NPs significantly reduced the growth of tumors without inducing any apparent toxicity. Conversely, mice treated with free DOX exhibited significant weight loss, early toxic cardiomyopathy, acute toxic hepatopathy, reduced hematopoiesis and fatal toxicity. The improved safety profile of the polymeric DOX-NPs can be explained by the low circulating concentration of non-nanoparticle-associated drug as well as the reduced accumulation of DOX in non-target organs. These findings support the use of P(NBCh9-b-NBPEG) nanoparticles as delivery platforms for hydrophobic anticancer drugs intended to reduce the toxicity of conventional treatments.

Improving paclitaxel pharmacokinetics by using tumor-specific mesoporous silica nanoparticles with intraperitoneal delivery.

Mesoporous silica nanoparticles (MSNs) containing paclitaxel for intraperitoneal (i.p.) delivery were developed to exploit the tumor specific accumulation of these nanocarriers after i.p. injection and the slow release of paclitaxel from the MSNs. A 3.5-fold increase in tumor cellular drug uptake was observed for the paclitaxel-loaded MSNs compared with free paclitaxel. An in vivo study using xenograft mice bearing peritoneal human pancreatic carcinoma MIA PaCa-2 demonstrated that the MSN-paclitaxel formulation, compared to free paclitaxel, exhibited a 3.2-fold increase in peritoneal cavity residence time, slower absorption into the systemic circulation with one third systemic exposure, but a 6.5-fold increase in peritoneal tumor accumulation. Tissue distribution imaging showed significantly greater accumulation of fluorescent MSNs in tumor tissues compared to other peritoneal tissues. In conclusion, intraperitoneal administration of drug-containing MSNs was effective at reducing systemic exposure and increasing the peritoneal tumor accumulation of paclitaxel.

Fluorescent, bioactive protein nanoparticles (prodots) for rapid, improved cellular uptake.

A simple and effective method for synthesizing highly fluorescent, protein-based nanoparticles (Prodots) and their facile uptake into the cytoplasm of cells is described here. Prodots made from bovine serum albumin (nBSA), glucose oxidase (nGO), horseradish peroxidase (nHRP), catalase (nCatalase), and lipase (nLipase) were found to be 15-50 nm wide and have been characterized by gel electrophoresis, transmission electron microscopy (TEM), circular dichroism (CD), fluorescence spectroscopy, dynamic light scattering (DLS), and optical microscopic methods. Data showed that the secondary structure of the protein in Prodots is retained to a significant extent and specific activities of nGO, nHRP, nCatalase, and nLipase were 80%, 70%, 65%, and 50% of their respective unmodified enzyme activities. Calorimetric studies indicated that the denaturation temperatures of nGO and nBSA increased while those of other Prodots remained nearly unchanged, and accelerated storage half-lives of Prodots at 60 °C increased by 4- to 8-fold. Exposure of nGO and nBSA+ nGO to cells indicated rapid uptake within 1-3 h, accompanied by significant blebbing of the plasma membrane, but no uptake has been noted in the absence of nGO. The presence of nGO/glucose in the media facilitated the uptake, and hydrogen peroxide induced membrane permeability could be responsible for this rapid uptake of Prodots. In control studies, FITC alone did not enter the cell, BSA-FITC was not internalized even in the presence of nGO, and there has been no uptake of nBSA-FITC in the absence of nGO. These are the very first examples of very rapid cellular uptake of fluorescent nanoparticles into cells, particularly nanoparticles made from pure proteins. The current approach is a simple and efficient method for the preparation of bioactive, fluorescent protein nanoparticles of controllable size for cellular imaging, and cell uptake is under the control of two separate chemical triggers.

Redox-sensitive nanoparticles from amphiphilic cholesterol-based block copolymers for enhanced tumor intracellular release of doxorubicin.

A novel amphiphilic cholesterol-based block copolymer comprised of a polymethacrylate bearing cholesterol block and a polyethylene glycol block with reducible disulfide bonds (PC5MA-SS-PEO) was synthesized and evaluated as a redox-sensitive nanoparticulate delivery system. The self-assembled PC5MA-SS-PEO nanoparticles (SS-NPs) encapsulated the anticancer drug doxorubicin (DOX) with high drug loading (18.2% w/w) and high encapsulation efficiency (94.9%). DOX-encapsulated PC5MA-SS-PEO self-assembled nanoparticles (DOX-encapsulated SS-NPs) showed excellent stability and exhibited a rapid DOX release in response to dithiothreitol reductive condition. Importantly, following internalization by lung cancer cells, the reducible DOX-encapsulated SS-NPs achieved higher cytotoxicity than the non-reducible thioester NPs whereas blank nanoparticles were non-cytotoxic. Furthermore, in vivo imaging studies in tumor-bearing severe combined immunodeficiency (SCID) mice showed that the nanoparticles preferentially accumulated in tumor tissue with remarkably reduced accumulation in the healthy non-target organs. The results indicated that the SS-NPs may be a promising platform for cancer-cell specific delivery of hydrophobic anticancer drugs. FROM THE CLINICAL EDITOR: The use of nanocarriers for drug delivery against tumors has been under intense research. One problem of using carrier system is the drug release kinetics at tumor site. In this article, the authors continued their previous study in the development of an amphiphilic cholesterol-based block copolymer with redox-sensitive modification, so that the payload drug could be released in response to the microenvironment. The interesting results should provide a new direction for designing future novel nanocarrier systems.

Long circulating self-assembled nanoparticles from cholesterol-containing brush-like block copolymers for improved drug delivery to tumors.

Amphiphilic brush-like block copolymers composed of polynorbonene-cholesterol/poly(ethylene glycol) (P(NBCh9-b-NBPEG)) self-assembled to form a long circulating nanostructure capable of encapsulating the anticancer drug doxorubicin (DOX) with high drug loading (22.1% w/w). The release of DOX from the DOX-loaded P(NBCh9-b-NBPEG) nanoparticles (DOX-NPs) was steady at less than 2% per day in PBS. DOX-NPs were effectively internalized by human cervical cancer cells (HeLa) and showed dose-dependent cytotoxicity, whereas blank nanoparticles were noncytotoxic. The DOX-NPs demonstrated a superior in vivo circulation time relative to that of free DOX. Tissue distribution and in vivo imaging studies showed that DOX-NPs preferentially accumulated in tumor tissue with markedly reduced accumulation in the heart and other vital organs. The DOX-NPs greatly improved survival and significantly inhibited tumor growth in tumor-bearing SCID mice compared to that for the untreated and free DOX-treated groups. The results indicated that self-assembled P(NBCh9-b-NBPEG) may be a useful carrier for improving tumor delivery of hydrophobic anticancer drugs.

Particle margination and its implications on intravenous anticancer drug delivery.

"Margination" refers to the movement of particles in flow toward the walls of a channel. The term was first coined in physiology for describing the behavior of white blood cells (WBCs) and platelets in blood flow. The margination of particles is desirable for anticancer drug delivery because it results in the close proximity of drug-carrying particles to the endothelium, where they can easily diffuse into cancerous tumors through the leaky vasculature. Understanding the fundamentals of margination may further lead to the rational design of particles and allow for more specific delivery of anticancer drugs into tumors, thereby increasing patient comfort during cancer treatment. This paper reviews existing theoretical and experimental studies that focus on understanding margination. Margination is a complex phenomenon that depends on the interplay between inertial, hydrodynamic, electrostatic, lift, van der Waals, and Brownian forces. Parameters that have been explored thus far include the particle size, shape, density, stiffness, shear rate, and the concentration and aggregation state of red blood cells (RBCs). Many studies suggested that there exists an optimal particle size for margination to occur, and that nonspherical particles tend to marginate better than spherical particles. There are, however, conflicting views on the effects of particle density, stiffness, shear rate, and RBCs. The limitations of using the adhesion of particles to the channel walls in order to quantify margination propensity are explained, and some outstanding questions for future research are highlighted.

State of the Art of Silica Nanoparticles: An Overview on Biodistribution and Preclinical Toxicity Studies.

Over the past few years, nanoparticles have drawn particular attention in designing and developing drug delivery systems due to their distinctive advantages like improved pharmacokinetics, reduced toxicity, and specificity. Along with other successful nanosystems, silica nanoparticles (SNPs) have shown promising effects for therapeutic and diagnostic purposes. These nanoparticles are of great significance owing to their modifiable surface with various ligands, tunable particle size, and large surface area. The rate and extent of degradation and clearance of SNPs depend on factors such as size, shape, porosity, and surface modification, which directly lead to varying toxic mechanisms. Despite SNPs' enormous potential for clinical and pharmaceutical applications, safety concerns have hindered their translation into the clinic. This review discusses the biodistribution, toxicity, and clearance of SNPs and the formulation-related factors that ultimately influence clinical efficacy and safety for treatment. A holistic view of SNP safety will be beneficial for developing an enabling SNP-based drug product.

Impact of active pharmaceutical ingredient variables and oleaginous base on the in vitro drug release from ophthalmic ointments: An investigation using dexamethasone as a model drug.

The present study systematically investigates the impact of active pharmaceutical ingredient (API) variables and oleaginous base characteristics on the in vitro release (IVR) performance of ophthalmic ointments, utilizing dexamethasone as a model drug. The interplay between selected attributes (i.e., particle size distribution, crystallinity, and polymorphic form for API, and rheological factors for compendial-grade white petrolatum) and IVR performance was investigated. APIs from different vendors exhibited variations in crystallinity and polymorphism. Ointments containing amorphous dexamethasone presented higher release amounts/rates compared to crystalline counterparts, emphasizing the role of physical state in release kinetics. Variations in particle size of this lipophilic API (5.4 - 21.2 µm) did not appear to impact IVR performance significantly. In contrast, white petrolatum's rheological attributes, which varied substantially within USP-grade petrolatum, were found to critically affect the drug release rate and extent of the ointment. The study's comprehensive analysis establishes a coherent connection between the quality attributes of both API and petrolatum and IVR, delineating their intricate interdependent effects on ophthalmic ointment performance. These findings provide reference to formulation design, quality control, and regulatory considerations within the pharmaceutical industry, fostering a robust foundational understanding of commonly overlooked quality attributes in ophthalmic ointments.