Preparation of High-Drug-Loaded Clarithromycin Gastric-Floating Sustained-Release Tablets Using 3D Printing.

The high-drug-loaded sustained-release gastric-floating clarithromycin (CAM) tablets were proposed and manufactured via semisolid extrusion (SSE)-based 3D printing. The physical and mechanical properties, such as dimensions, weight variation, friability, and hardness, were accessed according to the quality standards of Chinese Pharmacopoeia (Ch.P). The interactions among the drug-excipients were evaluated via differential scanning calorimetry (DSC), Fourier-transform infrared spectroscopy (FTIR), and X-ray diffraction (XRD) techniques. Next, the rheological properties of the paste and the effect of the excipients and solvents were evaluated. Finally, a very high drug-loading of up to 81.7% (w/w) with the sustain release time of 8 h (125 mg) and 12 h (250 mg) was achieved. The results revealed the potential of SSE for achieving a high drug loading and identified the suitable properties of the paste for SSE-based 3D printing.

A potential nanoparticle-loaded in situ gel for enhanced and sustained ophthalmic delivery of dexamethasone.

Increasing the permeability of drugs across the cornea is key to improving drug absorption by the eye. This study presents a newly developed in situ gel loaded with nanoparticles, which could achieve controlled drug release and high ocular drug bioavailability by avoiding rapid precorneal clearance. The physicochemical parameters of the formulation were investigated and showed uniform size, physical stability, and favorable rheological and gelling properties. Ex vivo permeation studies revealed significantly higher drug release from the in situ gel loaded with nanoparticles compared to the conventional poloxamer in situ gel and the drug solution. When compared with a marketed formulation, the in situ gel loaded with nanoparticles provided slower controlled release and higher ocular bioavailability of dexamethasone. In conclusion, the developed nanoparticle-loaded in situ gel can successfully increase drug ocular bioavailability by enhancing contact time with the ocular surface and permeation through the cornea.

Formulation and Evaluation of PLGA Nanoparticulate-Based Microneedle System for Potential Treatment of Neurological Diseases.

Introduction: The tight structure of the blood-brain barrier severely limits the level of drug therapy for central nervous system disorders. In this study, a novel composite delivery system combining nanocarrier and microneedle technology was prepared to explore the possibility of transdermal delivery of drugs to work in the brain. Methods: Nanoparticle solutions containing paroxetine and rhodamine-B were prepared using PLGA as a carrier by the emulsification-solvent volatilization method. Then, they were mixed with hyaluronic acid and the PLGA nanoparticulate-based microneedle system (Rh-NPs-DMNs) was prepared by a multi-step decompression-free diffusion method. The particle size, zeta potential, and micromorphology of the nano solution were measured; the appearance, mechanical strength, dissolution properties, and puncture effect of the Rh-NPs-DMNs were evaluated; also, it was evaluated for in vivo live imaging properties and in vitro skin layer transport and distribution properties. Results: The mean particle size of Rh-NPs was 96.25 ± 2.26 nm; zeta potential of 15.89 ± 1.97 mV; PDI of 0.120 ± 0.079. Rh-NPs-DMNs had a high needle content of 96.11 ± 1.27% and a tip height of 651.23 ± 1.28 µm, with excellent mechanical properties (fracture force of 299.78 ± 1.74 N). H&E skin tissue staining showed that Rh-NPs-DMNs produced micron-sized mechanical pores approximately 550 µm deep immediately after drug administration, allowing for efficient circulation of the drug; and the results of in vivo imaging showed that Rh-B NPs DMNs had a faster transport rate than Rh-B DMNs, with strong fluorescent signals in both brain (P<0.01) and hippocampus (P<0.05) 48 h after drug administration. Conclusion: Nanoparticles can prolong blood circulation time and intracerebral retention time and have certain brain-targeting properties due to their excellent physical properties. The use of microneedle technology combined with nanocarriers provides new ideas for delivery systems for the treatment of central neurological diseases.

Nanoformulation of Paclitaxel: Exploring the Cyclodextrin / PLGA Nano Delivery Carrier to Slow Down Paclitaxel Release, Enhance Accumulation in Vivo.

Background: Improving the aggregation and penetration in tumor sites increases the anti-tumor efficacy of nanomedicine. In the current study, we designed cyclodextrin modified PLGA nanoparticles loaded with paclitaxel to elevate the accumulation and prolong circulation of chemotherapy drugs in vivo. Methods: The PLGA nanoparticles loaded with paclitaxel (PTX PLGA NPs) and cyclodextrin (CD) modified PLGA nanoparticles loaded with paclitaxel (PTX PLGA/CD NPs) were prepared using the emulsification solvent evaporation method. The nanoparticles were characterized by particle size, zeta potential, encapsulation efficiency, infrared spectroscopy analysis and X-Ray diffraction (XRD). Then, drug release of the nanoparticles was evaluated via reverse dialysis method in vitro. Finally, the in vivo distribution fate and pharmacokinetic characteristics of the nanoparticles were assessed in mice and rats. Results: The average particle size, zeta potential, and encapsulation efficiency of PTX PLGA NPs were (163.57±2.07) nm, - (20.53±2.79) mV and (60.44±6.80)%. The average particle size, zeta potential, and encapsulation efficiency of PTX PLGA/CD NPs were (148.57±1.66) nm, - (11.42±0.84) mV and (85.70±2.06)%. In vitro release studies showed that PTX PLGA/CD NPs were released more slowly compared to PTX PLGA NPs under normal blood pH conditions, while PTX PLGA/CD NPs were released more completely under tumor site pH conditions. The modified PLGA nanocarrier (PLGA/CD NPs) increased drug residence time and accumulation than the plain PLGA nanocarrier (PLGA NPs) in vivo distribution. In addition, the elimination half-life, area under the drug-time curve, and maximum blood concentration of the nanoparticle group were higher than those of Taxol®, especially the PTX PLGA/CD NPs group, which was significantly different from Taxol® and plain nanoparticle groups (p<0.001). Conclusions: The 2-HP-ß-CD modified PLGA nanoparticles prolonged circulation time and accumulation of the chemotherapy drug paclitaxel in vivo.

Formation of Hydrophilic Nanofibers from Nanostructural Design in the Co-Encapsulation of Celecoxib through Electrospinning.

This study presents a method for a one-step co-encapsulation of PLGA nanoparticles in hydrophilic nanofibers. The aim is to effectively deliver the drug to the lesion site and achieve a longer release time. The celecoxib nanofiber membrane (Cel-NPs-NFs) was prepared by emulsion solvent evaporation and electrospinning with celecoxib as a model drug. By this method, nanodroplets of celecoxib PLGA are entrapped within polymer nanofibers during an electrospinning process. Moreover, Cel-NPs-NFs exhibited good mechanical strength and hydrophilicity, with a cumulative release of 67.74% for seven days, and the cell uptake at 0.5 h was 2.7 times higher than that of pure nanoparticles. Furthermore, pathological sections of the joint exhibited an apparent therapeutic effect on rat OA, and the drug was delivered effectively. According to the results, this solid matrix containing nanodroplets or nanoparticles could use hydrophilic materials as carriers to prolong drug release time.

Effect of a 2-HP-ß-Cyclodextrin Formulation on the Biological Transport and Delivery of Chemotherapeutic PLGA Nanoparticles.

BACKGROUND: The aim of this work was to develop a novel and feasible modification strategy by utilizing the supramolecular effect of 2-hydroxypropyl-beta-cyclodextrin (2-HP-ß-CD) for enhancing the biological transport efficiency of paclitaxel (PTX)-loaded poly(lactide-co-glycolide) (PLGA) nanoparticles. METHODS: PTX-loaded 2-HP-ß-CD-modified PLGA nanoparticles (2-HP-ß-CD/PLGA NPs) were prepared using the modified emulsion method. Nano-characteristics, drug release behavior, in vitro cytotoxicity, cellular uptake profiles and in vivo bio-behavior of the nanoparticles were then characterized. RESULTS: Compared with the plain PLGA NPs, 2-HP-ß-CD/PLGA NPs exhibited smaller particle sizes (151.03±1.36 nm), increased entrapment efficiency (~49.12% increase) and sustained drug release. When added to A549 human lung cancer cells, compared with PLGA NPs, 2-HP-ß-CD/PLGA NPs exhibited higher cytotoxicity in MTT assays and improved cellular uptake efficiency. Pharmacokinetic analysis showed that the AUC value of 2-HP-ß-CD/PLGA NPs was 2.4-fold higher than commercial Taxol® and 1.7-fold higher than plain PLGA NPs. In biodistribution assays, 2-HP-ß-CD/PLGA NPs exhibited excellent stability in the circulation. CONCLUSION: The results of this study suggest that the formulation that contains 2-HP-ß-CD can prolong PTX release, enhance drug transport efficiency and serve as a potential tumor targeting system for PTX.

Preparation of clarithromycin floating core-shell systems (CSS) using multi-nozzle semi-solid extrusion-based 3D printing.

Matrix erosion is unavoidable during the release of poorly soluble drugs from gastric floating delivery system (GFDDS), which shortens the floating time and diminishes drug release. We fabricated a core-shell system (CSS) consisting of a low-density drug-loaded shell and a floating core using multi-nozzle semi-solid extrusion (SSE) 3D printing technology. The clarithromycin (CAM) loading capacity of the shell was 81.7%. The floating core paste provided structural support during printing and formed a hollow structure in CAM CSS, which increased the buoyancy in the early stage of drug release. In addition, the floating core had numerous micro-airbags that swelled when the solution penetrated the core, and generated CO2. The micro-airbag structure and CO2 generation further increased the buoyancy of CSS. The CAM CSS achieved 74.5% (w/w) drug loading, 8 h sustained release, and immediate and prolonged floating (>10 h). This structure of CSS and floating core provide a novel perspective for constructing a stable gastric floating drug delivery system.

Cross-linked thermosensitive nanohydrogels for ocular drug delivery with a prolonged residence time and enhanced bioavailability.

AIM: A temperature-triggered, cross-linked nano hydrogel formulation (NPs-gel) was prepared to prolong the residence time of dexamethasone (DXM) in the eye and increase its bioavailability. RESEARCH DESIGN AND METHODS: The NPs-gel was prepared by combining a high pressure homogenization method with a cold solution method. Soy lecithin E200, lecithin oil, glycerol, kolliphor P188, kolliphor P407, and polycarbophil were the excipients used for the formation of NPs-gel containing DXM. The nanoparticle size, temperature-sensitive phase transition characteristics, in vitro and in vivo release behavior, corneal permeability, and eye irritation level of the NPs-gel were evaluated. RESULTS: The NPs-gel had slightly larger particle size than the DXM-loaded nanoparticles, yet it retained the properties of nanoparticles such as surface effect and size effect. The phase transition temperature was 33.2 °C, which is within the trigger conditions of intraocular temperature. Under physiological conditions, the adhesion and adhesion work of the NPs-gel were 1.1 and 2.1 times that of an in situ-formed gel, and the gel strength of NPs-gel was 1.8 times that of an in situ-formed gel. These results indicate that NPs-gel has greater adhesion and mechanical strength. The area under the curve of NPs-gel was 3.08 and 1.51 times that of DXM-loaded nanoparticles and in situ-formed gel, showing higher bioavailability. CONCLUSION: The NPs-gel is a suitable formulation to further enhance ocular drug delivery.

Enhancing Betulinic Acid Dissolution Rate and Improving Antitumor Activity via Nanosuspension Constructed by Anti-Solvent Technique.

PURPOSE: The aim of this study was to prepare and evaluate betulinic acid nanosuspension (BA-NS) for new drug delivery to enhance its solubility and in vitro anti-tumor activity. METHODS: BA-NS was formulated by an anti-solvent precipitation method using the Box-Behnken design (BBD). Particle size (PS) and Zeta potential were measured by laser particle size analysis. The drug solid state after freeze drying was characterized by scanning electron microscope (SEM), transmission electron microscope (TEM), differential scanning calorimetry (DSC), X-ray powder diffraction (XRPD) and Fourier transform infrared spectroscopy (FTIR) after freeze drying. The saturation solubility and dissolution rate were determined by solubility assay and in vitro dissolution studies, respectively. The in vitro cytotoxicity assay was performed using 3-(4,5-dimethylthiazole)-2,5-diphenltetraazolium bromide (MTT) method. RESULTS: The PS was 129.7±12.2 nm having a Zeta potential of -28.1±4.5 mV and the polydispersity index (PDI) was 0.231±0.013, which confirmed that the nanosuspension was in the stable amorphous state. A series of characterization experiments demonstrated that nanoparticles retained original effective structure and existed as spherical or near-spherical nanoparticles in the nanosuspension, but the drug transferred from the crystal state to the amorphous state. The form of lyophilized BA-NS was very successful in enhancing the dissolution rate in PH-dependent way. The cytotoxicity assay revealed that BA-NS could significantly enhance the in vitro anti-proliferation against tumor cells compared to the BA suspension (BA-S). CONCLUSION: The BA-NS can remarkably improve solubility and in vitro antitumor activity, which seems very promising for the treatment of cancers in practical application.

PLGA Nanoparticle Platform for Trans-Ocular Barrier to Enhance Drug Delivery: A Comparative Study Based on the Application of Oligosaccharides in the Outer Membrane of Carriers.

PURPOSE: The trans-ocular barrier is a key factor limiting the therapeutic efficacy of triamcinolone acetonide. We developed a poly(lactic-co-glycolic acid) nanoparticles (PLGA NPs) surface modified respectively with 2-hydroxypropyl-ß-cyclodextrin (2-HP-ß-CD), chitosan oligosaccharide and trehalose. Determination of the drug/nanoparticles interactions, characterization of the nanoparticles, in vivo ocular compatibility tests, comparisons of their corneal permeability and their pharmacokinetics in aqueous humor were carried out. METHODS: All PLGA NPs were prepared by the single emulsion and evaporation method and the drug-nanoparticle interaction was studied. The physiochemical features and in vitro corneal permeability of NPs were characterized while the aqueous humor pharmacokinetics was performed to evaluate in vivo corneal permeability of NPs. Ocular compatibility of NPs was investigated through Draize and histopathological test. RESULTS: The PLGA NPs with lactide/glycolide ratio of 50:50 and small particle size (molecular weight 10 kDa) achieved optimal drug release and corneal permeability. Surface modification with different oligosaccharides resulted in uniform particle sizes and similar drug-nanoparticle interactions, although 2-HP-ß-CD/PLGA NPs showed the highest entrapment efficiency. In vitro evaluation and aqueous humor pharmacokinetics further revealed that 2-HP-ß-CD/PLGA NPs had greater trans-ocular permeation and retention compared to chitosan oligosaccharide/PLGA and trehalose/PLGA NPs. No ocular irritation in vivo was detected after applying modified/unmodified PLGA NPs to rabbit's eyes. CONCLUSION: 2-HP-ß-CD/PLGA NPs are a promising nanoplatform for localized ocular drug delivery through topical administration.

Characterisation of 2-HP-ß-cyclodextrin-PLGA nanoparticle complexes for potential use as ocular drug delivery vehicles.

Aim: 2-HP-ß-cyclodextrin-PLGA nanoparticle complexes were prepared to enhance the aqueous humour delivery of Triamcinolone acetonide.Materials & methods: Drug-loaded 2-HP-ß-CD/PLGA nanoparticle complexes prepared by adapting a quasi-emulsion solvent evaporation technique. In vitro drug release, in vitro transcorneal permeation study, histopathological study and in vivo transcorneal penetration of PLGA nanoparticles and 2-HP-ß-CD/PLGA nanoparticle complexes were evaluated. Results: Particle size distributions of 2-HP-ß-CD/PLGA nanoparticle complexes were 149.4 ± 3.7 nm and presented stable system. Corneal penetration studies revealed steady sustained drug release (First-order); 2-HP-ß-CD/PLGA nanoparticle complexes increased ocular bioavailability by increasing dispersion in the tear film and improving drug release. Conclusion: 2-HP-ß-CD/PLGA nanoparticle complex formulation is a promising alternative to conventional eye drops.

Ruthenium complex delivery using liposomes to improve bioactivity against HeLa cells via the mitochondrial pathway.

AIM: The aim of this study was to encapsulate a ruthenium complex [Ru(ttbpy)2PIP](ClO4)2 (Ru) in liposomes to enhance their antitumor effect on human cervical cancer. METHODS: The Ru-loaded PEGylated liposomes (Ru-Lip) were prepared using thin-film hydration method. The mechanism of action was studied. RESULTS: A novel Ru was successfully synthesized. Ru-Lip showed stronger cytotoxic activity against HeLa cells than Ru. Ru-Lip demonstrated a more significant increase in apoptosis, reactive oxygen species production and apoptosis-associated processes (intracellular calcium concentration, cytochrome c release and activation of Bax and caspase-3) than Ru. Ru-Lip exhibited greater blockade efficacy in the cell cycle G1 phase and greater DNA damage than Ru. CONCLUSION: Ru-Lip significantly elevates the anticancer effect via reactive oxygen species-mediated mitochondrial dysfunctional pathway.

Increased skin permeation efficiency of imperatorin via charged ultradeformable lipid vesicles for transdermal delivery.

AIM: The aim of this work was to develop a novel vesicular carrier, ultradeformable liposomes (UDLs), to expand the applications of the Chinese herbal medicine, imperatorin (IMP), and increase its transdermal delivery. METHODS: In this study, we prepared IMP-loaded UDLs using the thin-film hydration method and evaluated their encapsulation efficiency, vesicle deformability, skin permeation, and the amounts accumulated in different depths of the skin in vitro. The influence of different charged surfactants on the properties of the UDLs was also investigated. RESULTS: The results showed that the UDLs containing cationic surfactants had high entrapment efficiency (60.32%±2.82%), an acceptable particle size (82.4±0.65 nm), high elasticity, and prolonged drug release. The penetration rate of IMP in cationic-UDLs was 3.45-fold greater than that of IMP suspension, which was the highest value among the vesicular carriers. UDLs modified with cationic surfactant also showed higher fluorescence intensity in deeper regions of the epidermis. CONCLUSION: The results of our study suggest that cationic surfactant-modified UDLs could increase the transdermal flux, prolong the release of the drug, and serve as an effective dermal delivery system for IMP.

Nanostructured lipid carriers-based thermosensitive eye drops for enhanced, sustained delivery of dexamethasone.

AIM: Nanostructured lipid carriers in-gel (NLCs-gel) were prepared to enhance and improve the ocular delivery of dexamethasone. Materials & methods: NLCs containing dexamethasone prepared by high-pressure homogenization were characterized and dispersed into thermosensitive gels (Pluronic F127 and F68 as gels material). In vitro drug release studies, ocular irritation tests, ex vivo corneal penetration and drug dynamics of NLCs and NLCs-gel were evaluated in aqueous humor. RESULTS: NLCs-gel exhibited a rapid sol-gel transition at 34.4°C and presented nano-sized, narrowly distributed particles. Corneal penetration studies revealed steady sustained drug release (Ritger-Peppas); NLCs-gel increased ocular bioavailability by prolonging precorneal retention time and improving corneal permeation. CONCLUSION: These findings suggest developing NLCs-gel for potential treatment of posterior segment eye diseases.

Corneal permeation properties of a charged lipid nanoparticle carrier containing dexamethasone.

Drug delivery carriers can maintain effective therapeutic concentrations in the eye. To this end, we developed lipid nanoparticles (L/NPs) in which the surface was modified with positively charged chitosan, which engaged in hydrogen bonding with the phospholipid membrane. We evaluated in vitro corneal permeability and release characteristics, ocular irritation, and drug dynamics of modified and unmodified L/NPs in aqueous humor. The size of L/NPs was uniform and showed a narrow distribution. Corneal permeation was altered by the presence of chitosan and was dependent on particle size; the apparent permeability coefficient of dexamethasone increased by 2.7 and 1.8 times for chitosan-modified and unmodified L/NPs, respectively. In conclusion, a chitosan-modified system could be a promising method for increasing the ocular bioavailability of unmodified L/NPs by enhancing their retention time and permeation into the cornea. These findings provide a theoretical basis for the development of effective drug delivery systems in the treatment of ocular disease.