RESUMO
Perovskite solar cells (PSCs) comprise a solid perovskite absorber sandwiched between several layers of different charge-selective materials, ensuring unidirectional current flow and high voltage output of the devices1,2. A 'buffer material' between the electron-selective layer and the metal electrode in p-type/intrinsic/n-type (p-i-n) PSCs (also known as inverted PSCs) enables electrons to flow from the electron-selective layer to the electrode3-5. Furthermore, it acts as a barrier inhibiting the inter-diffusion of harmful species into or degradation products out of the perovskite absorber6-8. Thus far, evaporable organic molecules9,10 and atomic-layer-deposited metal oxides11,12 have been successful, but each has specific imperfections. Here we report a chemically stable and multifunctional buffer material, ytterbium oxide (YbOx), for p-i-n PSCs by scalable thermal evaporation deposition. We used this YbOx buffer in the p-i-n PSCs with a narrow-bandgap perovskite absorber, yielding a certified power conversion efficiency of more than 25%. We also demonstrate the broad applicability of YbOx in enabling highly efficient PSCs from various types of perovskite absorber layer, delivering state-of-the-art efficiencies of 20.1% for the wide-bandgap perovskite absorber and 22.1% for the mid-bandgap perovskite absorber, respectively. Moreover, when subjected to ISOS-L-3 accelerated ageing, encapsulated devices with YbOx exhibit markedly enhanced device stability.
RESUMO
The tunable bandgaps and facile fabrication of perovskites make them attractive for multi-junction photovoltaics1,2. However, light-induced phase segregation limits their efficiency and stability3-5: this occurs in wide-bandgap (>1.65 electron volts) iodide/bromide mixed perovskite absorbers, and becomes even more acute in the top cells of triple-junction solar photovoltaics that require a fully 2.0-electron-volt bandgap absorber2,6. Here we report that lattice distortion in iodide/bromide mixed perovskites is correlated with the suppression of phase segregation, generating an increased ion-migration energy barrier arising from the decreased average interatomic distance between the A-site cation and iodide. Using an approximately 2.0-electron-volt rubidium/caesium mixed-cation inorganic perovskite with large lattice distortion in the top subcell, we fabricated all-perovskite triple-junction solar cells and achieved an efficiency of 24.3 per cent (23.3 per cent certified quasi-steady-state efficiency) with an open-circuit voltage of 3.21 volts. This is, to our knowledge, the first reported certified efficiency for perovskite-based triple-junction solar cells. The triple-junction devices retain 80 per cent of their initial efficiency following 420 hours of operation at the maximum power point.
RESUMO
Light-emitting diodes (LEDs) based on perovskite quantum dots have shown external quantum efficiencies (EQEs) of over 23% and narrowband emission, but suffer from limited operating stability1. Reduced-dimensional perovskites (RDPs) consisting of quantum wells (QWs) separated by organic intercalating cations show high exciton binding energies and have the potential to increase the stability and the photoluminescence quantum yield2,3. However, until now, RDP-based LEDs have exhibited lower EQEs and inferior colour purities4-6. We posit that the presence of variably confined QWs may contribute to non-radiative recombination losses and broadened emission. Here we report bright RDPs with a more monodispersed QW thickness distribution, achieved through the use of a bifunctional molecular additive that simultaneously controls the RDP polydispersity while passivating the perovskite QW surfaces. We synthesize a fluorinated triphenylphosphine oxide additive that hydrogen bonds with the organic cations, controlling their diffusion during RDP film deposition and suppressing the formation of low-thickness QWs. The phosphine oxide moiety passivates the perovskite grain boundaries via coordination bonding with unsaturated sites, which suppresses defect formation. This results in compact, smooth and uniform RDP thin films with narrowband emission and high photoluminescence quantum yield. This enables LEDs with an EQE of 25.6% with an average of 22.1 ±1.2% over 40 devices, and an operating half-life of two hours at an initial luminance of 7,200 candela per metre squared, indicating tenfold-enhanced operating stability relative to the best-known perovskite LEDs with an EQE exceeding 20%1,4-6.
RESUMO
Pain perception arises from the integration of prior expectations with sensory information. Although recent work has demonstrated that treatment expectancy effects (e.g., placebo hypoalgesia) can be explained by a Bayesian integration framework incorporating the precision level of expectations and sensory inputs, the key factor modulating this integration in stimulus expectancy-induced pain modulation remains unclear. In a stimulus expectancy paradigm combining emotion regulation in healthy male and female adults, we found that participants' voluntary reduction in anticipatory anxiety and pleasantness monotonically reduced the magnitude of pain modulation by negative and positive expectations, respectively, indicating a role of emotion. For both types of expectations, Bayesian model comparisons confirmed that an integration model using the respective emotion of expectations and sensory inputs explained stimulus expectancy effects on pain better than using their respective precision. For negative expectations, the role of anxiety is further supported by our fMRI findings that (1) functional coupling within anxiety-processing brain regions (amygdala and anterior cingulate) reflected the integration of expectations with sensory inputs and (2) anxiety appeared to impair the updating of expectations via suppressed prediction error signals in the anterior cingulate, thus perpetuating negative expectancy effects. Regarding positive expectations, their integration with sensory inputs relied on the functional coupling within brain structures processing positive emotion and inhibiting threat responding (medial orbitofrontal cortex and hippocampus). In summary, different from treatment expectancy, pain modulation by stimulus expectancy emanates from emotion-modulated integration of beliefs with sensory evidence and inadequate belief updating.
Assuntos
Antecipação Psicológica , Ansiedade , Imageamento por Ressonância Magnética , Humanos , Masculino , Feminino , Ansiedade/psicologia , Ansiedade/fisiopatologia , Adulto , Antecipação Psicológica/fisiologia , Adulto Jovem , Percepção da Dor/fisiologia , Dor/psicologia , Dor/fisiopatologia , Teorema de Bayes , Emoções/fisiologia , Encéfalo/diagnóstico por imagem , Encéfalo/fisiopatologia , Encéfalo/fisiologia , Prazer/fisiologia , Mapeamento EncefálicoRESUMO
Ice cores from alpine glaciers are unique archives of past global and regional climate conditions. However, recovering climate records from these ice cores is often hindered by the lack of a reliable chronology, especially in the age range of 100 to 500 anni (a) for which radiometric dating has not been available so far. We report on radiometric 39Ar dating of an ice core from the Tibetan Plateau and the construction of a chronology covering the past 1,300 a using the obtained 39Ar ages. This is made possible by advances in the analysis of 39Ar using the laser-based detection method atom trap trace analysis, resulting in a twofold increase in the upper age limit of 39Ar dating. By measuring the anthropogenic 85Kr along with 39Ar we quantify and correct modern air contamination, thus removing a major systematic uncertainty of 39Ar dating. Moreover, the 85Kr data for the top part of the ice core provide information on firn processes, including the age difference between the ice and its enclosed gas. This first application of 39Ar and 85Kr to an ice core facilitates further ice cores from nonpolar glaciers to be used for recovering climate records of the Common Era, a period including pronounced anomalies such as the Little Ice Age and the Medieval Warm Period.
Assuntos
Camada de Gelo , Datação Radiométrica , Clima , Mudança Climática , Datação Radiométrica/métodos , TibetRESUMO
Long noncoding RNA (lncRNA) differentiation antagonizing noncoding RNA (DANCR) is overexpressed in human triple-negative breast cancer (TNBC) and promotes cell migration and proliferation. TNBC is limited in treatment options relative to hormone-receptor-positive breast cancer and is commonly treated with chemotherapy, which is often compromised by acquired resistance. DANCR has been implicated in the development of chemoresistance across multiple cancer types. Here, we applied magnetic resonance molecular imaging (MRMI) with a targeted contrast agent, MT218, specific to extradomain-B fibronectin (EDB-FN), a marker for epithelial-to-mesenchymal transition, to assess the therapeutic efficacy of the combination of paclitaxel and ZD2-PEG-ECO/siDANCR nanoparticles (ZD2-siDANCR-ELNP) to treat TNBC. The treatment of orthotopic MDA-MB-231 TNBC in mice with paclitaxel significantly suppressed tumor growth but with a significant increase of EDB-FN in the tumor, as revealed by MRMI and immunohistochemistry. Combining ZD2-siDANCR-ELNP with paclitaxel further reduced tumor sizes, along with reduced EDB-FN expression. Interestingly, MT218-MRMI revealed a lower reduction of tumor signal enhancement with the combination treatment than that with the siDANCR treatment alone, which was supported by higher cell density in the tumors treated with the combination therapy, as shown by histochemical analysis. MT218-MRMI clearly revealed the changes of the tumor microenvironment in response to various therapies and is effective to noninvasively assess the response of TNBC tumors to the therapies. Regulating oncogenic lncRNA DANCR is an effective strategy for improving the outcomes of chemotherapy in TNBC.
Assuntos
RNA Longo não Codificante , Neoplasias de Mama Triplo Negativas , Humanos , Animais , Camundongos , Neoplasias de Mama Triplo Negativas/diagnóstico por imagem , Neoplasias de Mama Triplo Negativas/tratamento farmacológico , RNA Longo não Codificante/genética , Interferência de RNA , Linhagem Celular Tumoral , Paclitaxel/uso terapêutico , Espectroscopia de Ressonância Magnética , Imagem Molecular/métodos , Proliferação de Células , Microambiente TumoralRESUMO
OBJECTIVE: Current gene therapy of inherited retinal diseases is achieved mainly by subretinal injection, which is invasive with severe adverse effects. Intravitreal injection is a minimally invasive alternative for gene therapy of inherited retinal diseases. This work explores the efficacy of intravitreal delivery of PEGylated ECO (a multifunctional pH-sensitive amphiphilic amino lipid) plasmid DNA (pGRK1-ABCA4-S/MAR) nanoparticles (PEG-ELNP) for gene therapy of Stargardt disease. METHODS: Pigmented Abca4-/- knockout mice received 1 µL of PEG-ELNP solution (200 ng/uL, pDNA concentration) by intravitreal injections at an interval of 1.5 months. The expression of ABCA4 in the retina was determined by RT-PCR and immunohistochemistry at 6 months after the second injection. A2E levels in the treated eyes and untreated controls were determined by HPLC. The safety of treatment was monitored by scanning laser ophthalmoscopy and electroretinogram (ERG). RESULTS: PEG-ELNP resulted in significant ABCA4 expression at both mRNA level and protein level at]6 months after 2 intravitreal injections, and a 40% A2E accumulation reduction compared with non-treated controls. The PEG-ELNP also demonstrated excellent safety as shown by scanning laser ophthalmoscopy, and the eye function evaluation from electroretinogram. CONCLUSIONS: Intravitreal delivery of the PEG-ELNP of pGRK1-ABCA4-S/MAR is a promising approach for gene therapy of Stargardt Disease, which can also be a delivery platform for gene therapy of other inherited retinal diseases.
Assuntos
Nanopartículas , Retina , Camundongos , Animais , Doença de Stargardt/genética , Doença de Stargardt/metabolismo , Doença de Stargardt/terapia , Retina/metabolismo , Terapia Genética/métodos , Plasmídeos/genética , DNA/metabolismo , Camundongos Knockout , Polietilenoglicóis/metabolismo , Injeções Intravítreas , Transportadores de Cassetes de Ligação de ATP/genética , Transportadores de Cassetes de Ligação de ATP/metabolismoRESUMO
In an increasing manner, near-infrared phosphor-converted light-emitting diodes (NIR pc-LEDs) are considered to be exemplary light sources owing to their notable attributes of elevated output power, economical nature, and exceptional portability. NIR phosphors are critical components of NIR pc-LEDs. Herein, we report a novel blue light excitable NIR phosphor CaLu2ZrScAl3O12:Cr3+ (CLZSA:Cr3+) as a crucial and efficient broadband NIR emitter. The CLZSA:Cr3+ phosphor displays an intense NIR broadband emission peaking at 776 nm and with a full width at half-maximum (fwhm) of 140 nm. The designed material also exhibits superior resistance to thermal quenching, as the intensity of emission at 423 K remains at 80% of that at room temperature. The constructed NIR pc-LED device based on CLZSA:Cr3+ demonstrates a high total output power of 68.4 mW at a drive current of 100 mA, along with a high photoelectric conversion efficiency of 23.0%. Impressively, the high-power NIR pc-LEDs are utilized as light sources for remote control and non-invasive detection, resulting in the excellent performance and remarkable achievement.
RESUMO
The growth kinetics of colloidal lead halide perovskite nanomaterials are an integral part of their applications, remains poorly understood due to complex nucleation processes and lack ofin situsize monitoring method. Here we demonstrated that absorption spectra can be used to observein situgrowth processes of ultrathin CsPbBr3nanowires in solution with reference to the effective mass infinite deep square potential well model. By means of this method, we have found that the ultrathin nanowires, fabricated by hot injection method, were firstly formed within one minute. Subsequently, they merge with each other into a thicker structure with increasing reaction time. We revealed that the nucleation, growth, and merging of the CsPbBr3nanowires are determined by the acid concentration and ligand chain length. At lower acidity, the critical nucleation size of the nanowire is smaller, while the shorter the ligand chain length, the faster the merging among the nanowires. Moreover, the merging mode between nanowires changed with their nucleation size. This growth kinetics of CsPbBr3nanowires provides a reference for optimizing the synthesis conditions to obtain the one-dimensional CsPbBr3with desired size, thus enabling accurate control of the nanowire shape.
RESUMO
PURPOSE: The fragmentation of polyps affects complete resection confirmation. The primary aim of this study was to assess the feasibility of a novel polyp retrieval bag for reducing the fragmentation rate of colon polyps. METHODS: Patients with a 5-15 mm colon polyp were recruited and randomized into two groups at a 1:1 ratio. After polyp resection, polyps obtained from patients in the treatment group were extracted via a novel polyp retrieval bag without traversing the instrument channel, whereas polyps obtained from patients in the control group were collected through the instrument channel, attaching the polyp trap to the instrument channel port, and applying suction. RESULTS: From January to July 2022, 225 patients were assessed for eligibility. The study participants included 204 patients, and seven patients whose samples were not retrieved were excluded. Polyp fragmentation was significantly lower in the treatment group than in the control group (3.0% [3/100] vs. 17.5% [17/97], P = 0.001). The retrieval failure rates in the treatment group and control group were not significantly different (2.0% [2/102] vs. 4.9% [5/102], P = 0.442). There were fewer colonoscope insertions in the treatment group than in the control group (102 vs. 110), but a significant difference was not present (P = 0.065). No significant adverse events were observed during the follow-up. CONCLUSIONS: This study demonstrated that the polyp retrieval bag was safe and feasible for reducing the fragmentation rate of retrieved polyps. TRIAL REGISTRATION: The study was registered at ClinicalTrials.gov (NCT05189912, 1/12/2021).
Assuntos
Pólipos do Colo , Humanos , Pólipos do Colo/cirurgia , Pólipos do Colo/patologia , Masculino , Feminino , Pessoa de Meia-Idade , Método Simples-Cego , Colonoscopia , Idoso , AdultoRESUMO
Micromechanical resonators have aroused growing interest as biological and chemical sensors, and microcantilever beams are the main research focus. Recently, a resonant microcantilever with an integrated heater has been applied in on-chip thermogravimetric analysis (TGA). However, there is a strong relationship between the mass sensitivity of a resonant microcantilever and the location of adsorbed masses. Different sampling positions will cause sensitivity differences, which will result in an inaccurate calculation of mass change. Herein, an integrated H-shaped resonant beam with uniform mass sensitivity and temperature distribution is proposed and developed to improve the accuracy of bio/chemical sensing and TGA applications. Experiments verified that the presented resonant beam possesses much better uniformity of sensitivity and temperature distribution compared with resonant microcantilevers. Gas-sensing and TGA experiments utilizing the integrated resonant beam were also carried out and exhibited good measurement accuracy.
RESUMO
Objective To analyze the research progress and hot topics in hypertrophic cardiomyopathy from 2018 to 2022.Methods The publications in the field of hypertrophic cardiomyopathy from January 1,2018 to December 31,2022 were retrieved from Web of Science core collection database and included for a bibliometric analysis.Results A total of 6355 publications were included,with an average citation frequency of 7 times.The year 2021 witnessed the most publications (1406).The analysis with VOSviewer showed that the research on sudden death related to hypertrophic cardiomyopathy,especially the predictive value of late gadolinium-enhanced cardiac MRI in sudden death,was a hot topic.In addition,gene detection and the new drug mavacamten became hot research topics.The United States was the country with the largest number of publications and the highest citation frequency in this field.Chinese scholars produced the second largest number of publications,which,however,included few high-quality research results.Conclusions Risk stratification and prevention of sudden death is still an important and hot research content in the field of hypertrophic cardiomyopathy.Chinese scholars should carry out multi-center cooperation in the future to improve the research results.
Assuntos
Bibliometria , Cardiomiopatia Hipertrófica , Cardiomiopatia Hipertrófica/epidemiologia , Cardiomiopatia Hipertrófica/diagnóstico por imagem , Cardiomiopatia Hipertrófica/diagnóstico , Humanos , Morte Súbita Cardíaca/epidemiologia , Publicações/estatística & dados numéricos , China/epidemiologiaRESUMO
Isotopically labeled alkanes play a crucial role in organic and pharmaceutical chemistry. While some deuterated methylating agents are readily available, the limited accessibility of other deuteroalkyl reagents has hindered the synthesis of corresponding products. In this study, we introduce a nickel-catalyzed system that facilitates the synthesis of various deuterium-labeled alkanes through the hydrodeuteroalkylation of d2-labeled alkyl TT salts with unactivated alkenes. Diverging from traditional deuterated alkyl reagents, alkyl thianthrenium (TT) salts can effectively and selectively introduce deuterium at α position of alkyl chains using D2O as the deuterium source via a single-step pH-dependent hydrogen isotope exchange (HIE). Our method allows for high deuterium incorporation, and offers precise control over the site of deuterium insertion within an alkyl chain. This technique proves to be invaluable for the synthesis of various deuterium-labeled compounds, especially those of pharmaceutical relevance.
RESUMO
BACKGROUND: Invasion and metastasis of hepatocellular carcinoma (HCC) is still an important reason for poor prognosis. LincRNA ZNF529-AS1 is a recently identified tumour-associated molecule that is differentially expressed in a variety of tumours, but its role in HCC is still unclear. This study investigated the expression and function of ZNF529-AS1 in HCC and explored the prognostic significance of ZNF529-AS1 in HCC. METHODS: Based on HCC information in TCGA and other databases, the relationship between the expression of ZNF529-AS1 and clinicopathological characteristics of HCC was analysed by the Wilcoxon signed-rank test and logistic regression. The relationship between ZNF529-AS1 and HCC prognosis was evaluated by KaplanâMeier and Cox regression analyses. The cellular function and signalling pathways involved in ZNF529-AS1 were analysed by GO and KEGG enrichment analysis. The relationship between ZNF529-AS1 and immunological signatures in the HCC tumour microenvironment was analysed by the ssGSEA algorithm and CIBERSORT algorithm. HCC cell invasion and migration were investigated by the Transwell assay. Gene and protein expression were detected by PCR and western blot analysis, respectively. RESULTS: ZNF529-AS1 was differentially expressed in various types of tumours and was highly expressed in HCC. The expression of ZNF529-AS1 was closely correlated with the age, sex, T stage, M stage and pathological grade of HCC patients. Univariate and multivariate analyses showed that ZNF529-AS1 was significantly associated with poor prognosis of HCC patients and could be an independent prognostic indicator of HCC. Immunological analysis showed that the expression of ZNF529-AS1 was correlated with the abundance and immune function of various immune cells. Knockdown of ZNF529-AS1 in HCC cells inhibited cell invasion and migration and inhibited the expression of FBXO31. CONCLUSION: ZNF529-AS1 could be a new prognostic marker for HCC. FBXO31 may be the downstream target of ZNF529-AS1 in HCC.
Assuntos
Carcinoma Hepatocelular , Proteínas F-Box , Neoplasias Hepáticas , RNA Longo não Codificante , Humanos , Carcinoma Hepatocelular/genética , Carcinoma Hepatocelular/patologia , Proliferação de Células , Proteínas F-Box/genética , Proteínas F-Box/metabolismo , Regulação Neoplásica da Expressão Gênica , Neoplasias Hepáticas/patologia , RNA Longo não Codificante/genética , RNA Longo não Codificante/metabolismo , Transdução de Sinais , Microambiente Tumoral , Proteínas Supressoras de Tumor/genéticaRESUMO
Indium phosphide (InP) quantum dots have enabled light-emitting diodes (LEDs) that are heavy-metal-free, narrow in emission linewidth, and physically flexible. However, ZnO/ZnMgO, the electron-transporting layer (ETL) in high-performance red InP/ZnSe/ZnS LEDs, suffers from high defect densities, quenches luminescence when deposited on InP, and induces performance degradation that arises due to trap migration from the ETL to the InP emitting layer. We posited that the formation of Zn2+ traps on the outer ZnS shell, combined with sulfur and oxygen vacancy migration between ZnO/ZnMgO and InP, may account for this issue. We synthesized therefore a bifunctional ETL (CNT2T, 3',3'â³,3'â³â³-(1,3,5-triazine-2,4,6-triyl)tris(([1,1'-biphenyl]-3-carbonitrile)) designed to passivate Zn2+ traps locally and in situ and to prevent vacancy migration between layers: the backbone of the small molecule ETL contains a triazine electron-withdrawing unit to ensure sufficient electron mobility (6 × 10-4 cm2 V-1 s-1), and the star-shaped structure with multiple cyano groups provides effective passivation of the ZnS surface. We report as a result red InP LEDs having an EQE of 15% and a luminance of over 12,000 cd m-2; this represents a record among organic-ETL-based red InP LEDs.
RESUMO
Magnetic resonance imaging (MRI) is a clinical imaging modality that provides high-resolution images of soft tissues, including cancerous lesions. Stable gadolinium(III) chelates have been used as contrast agents (CA) in MRI to enhance the contrast between the tissues of interest and surrounding tissues for accurate diagnostic imaging. Magnetic resonance molecular imaging (MRMI) of cancer requires targeted CA to specifically elucidate cancer-associated molecular processes and can provide high-resolution delineation and characterization of cancer for precision medicine. The main challenge for MRMI is the lack of sufficient sensitivity to detect the low concentration of the cellular oncogenic markers. In addition, targeted CA must satisfy regulatory safety requirements prior to clinical development. Up to now, there is no FDA-approved targeted CA for MRMI of cancer.In this Account, we discuss the latest developments in the design and development of clinically translatable targeted CA for MRMI of cancer, with an emphasis on our own research. The primary limitation of MRMI can be overcome by designing small molecular targeted CA to target abundant cancer-specific targets found in the tumor microenvironment (TME). For example, aggressive tumors have a unique extracellular matrix (ECM) composed of oncoproteins, which can be used as targetable markers for MRMI. We have designed and prepared small peptide conjugates of clinical contrast agents, including Gd-DTPA and Gd-DOTA, to target fibrin-fibronectin clots in tumors. These small molecular CA have been effective in enhancing MRMI detection of solid tumors and have demonstrated the ability to detect submillimeter cancer micrometastases in mouse tumor models, exceeding the detection limit of current clinical imaging modalities. We have also identified extradomain B fibronectin (EDB-FN), an oncofetal subtype of fibronectin, as a promising TME target to leverage in the design and development of small peptide targeted CA for clinical translation. The expression level of EDB-FN is correlated with invasiveness of cancer cells and poor patient survival of multiple cancer types. ZD2 peptide with a sequence of seven amino acids (TVRTSAD) was identified to specifically bind to the EDB protein fragment. Several ZD2 conjugates of macrocyclic GBCA, including Gd-DOTA and Gd(HP-DO3A), have been synthesized and tested in mouse tumor models. ZD2-N3-Gd(HP-DO3A) (MT218) with a high r1 relaxivity was selected as the lead agent for clinical translation. The physicochemical properties and preclinical assessments of MT218 are summarized in this Account. MRMI of EDB-FN with MT218 can effectively detect invasive tumors of multiple cancers with risk-stratification and monitor tumor response to anticancer therapies in mouse models. Currently, MT218 is in clinical trials for precision cancer MRMI. Herein, we will show that using targeted MRI contrast agents specific to abundant TME biomarkers is a pragmatic solution for effective precision cancer imaging in high spatial resolution. And thus, we illustrate a replicable approach for CA development that is vital for cancer MRMI.
Assuntos
Gadolínio , Neoplasias , Aminoácidos , Animais , Meios de Contraste/química , Fibrina , Fibronectinas/metabolismo , Gadolínio/química , Gadolínio DTPA , Compostos Heterocíclicos , Imageamento por Ressonância Magnética/métodos , Espectroscopia de Ressonância Magnética , Camundongos , Imagem Molecular/métodos , Neoplasias/diagnóstico por imagem , Proteínas Oncogênicas , Compostos Organometálicos , Peptídeos , Microambiente TumoralRESUMO
Owing to the advantages of organic field-effect transistors (OFETs) in the versatility of organic synthesis, multiparameter measurement, and signal amplification, sensors based on OFETs have received increasing attention for detecting volatile organic compounds (VOCs). However, false device operation and gas-sensing measurements often occur to vitiate the advantages of OFETs and even output error gas-sensing signals. In this work, by experimentally and theoretically studying the effects of VOC adsorption on the operational characteristics of the OFET, the proper operations of OFETs in gas-sensing measurements were clarified. The multiparameter measurements of OFETs showed that the source-drain current was the optimized parameter for achieving high responsivity, and other OFET parameters could be used for fingerprint analysis. By operating OFETs in the near-threshold region, the amplification effect was switched to enhance the responsivity by orders of magnitude to VOCs, while in the overthreshold region, the OFETs had a low signal-to-noise ratio. Besides, a counteraction effect and an uncertainty effect were discovered, leading to error gas-sensing signals. A theoretical study was carried out to reveal the dependency of the gas-sensing properties of OFETs on VOC adsorption. A series of rules were proposed for guiding the measurements of OFET sensors by taking full advantage of transistors in gas-sensing applications.
RESUMO
Hereditary genetic diseases, cancer, and infectious diseases are affecting global health and become major health issues, but the treatment development remains challenging. Gene therapies using DNA plasmid, RNAi, miRNA, mRNA, and gene editing hold great promise. Lipid nanoparticle (LNP) delivery technology has been a revolutionary development, which has been granted for clinical applications, including mRNA vaccines against SARS-CoV-2 infections. Due to the success of LNP systems, understanding the structure, formulation, and function relationship of the lipid components in LNP systems is crucial for design more effective LNP. Here, we highlight the key considerations for developing an LNP system. The evolution of structure and function of lipids as well as their LNP formulation from the early-stage simple formulations to multi-components LNP and multifunctional ionizable lipids have been discussed. The flexibility and platform nature of LNP enable efficient intracellular delivery of a variety of therapeutic nucleic acids and provide many novel treatment options for the diseases that are previously untreatable.
Assuntos
COVID-19 , Nanopartículas , Ácidos Nucleicos , Humanos , Vacinas contra COVID-19 , RNA Interferente Pequeno/genética , RNA Interferente Pequeno/química , SARS-CoV-2/genética , Lipídeos/química , Nanopartículas/químicaRESUMO
The cation-equivalent substitution strategy has the ability to manipulate the luminescence color of phosphors and enhance their overall luminescence performance. A series of novel yellow feldspar-type 3D layered phosphors (Ca1-ySry)4MgAl2Si3O14:xEu2+ were synthesized using a high-temperature solid-state reaction. The solid solution phosphors belong to a tetragonal crystal system with a space group of P4Ì 21m and cell parameters of a = b = 7.75407-7.91794 Å, c = 5.04299-5.22543 Å, and V = 303.166-327.602 Å3. Under near-ultraviolet (n-UV) excitation, the luminescence color of the phosphor undergoes modulation from yellow-green (530 nm) to blue (467 nm) as the Sr2+ ion substitution ratio increases. This modulation is attributed to the gradual decrease in crystal field splitting energy. Additionally, both the Stokes shift and the full width of the luminescence spectra decrease. Furthermore, there is an increase in the quantum yield (QY) from 45.50 to 60.73%. Finally, the fabricated white-light-emitting diode devices emitted warm white light and achieved high Ra (Ra = 94, 96.6, 92.7) and low correlated color temperature (CCT = 3486, 3430, 3788 K), indicating that the prepared solid solution phosphors can be used as candidate materials for WLED lighting.
RESUMO
Formamidinium lead triiodide (FAPbI3) is considered as the prospective light-absorbing layer on account of the close-to-ideal bandgap of theα-phase, wide optical absorption spectrum and good thermal stability. Therefore, how to realizeδtoα-phase transition to obtain phase-pureα-FAPbI3without additives is important for FAPbI3perovskite films. Herein, a homologous post-treatment strategy (HPTS) without additives is proposed to prepare FAPbI3films with pureα-phase. The strategy is processed along with dissolution and reconstruction process during the annealing. The FAPbI3film has tensile strain with the substrate, and the lattice keeps tensile, and the film maintains in anα/δhybrid phase. The HPTS process releases the tensile strain between the lattice and the substrate. The process of strain release realizes the phase transition fromδtoα-phase during this process. This strategy can accelerate the transformation from hexagonalδ-FAPbI3to cubicα-FAPbI3at 120 °C. As a result, the acquiredα-FAPbI3films exhibit better film quality in optical and electrical properties, accordingly achieving device efficiency of 19.34% and enhanced stability. This work explores an effective approach to obtain additive-free and phase-pureα-FAPbI3films through a HPTS to fabricate uniform high-performanceα-FAPbI3perovskite solar cells.