Development of mucoadhesive poly(lactide-co-glycolide) nanoparticles for ocular application.

Pilocarpine loaded poly(lactic-co-glycolic acid) (PLGA) nanoparticles were prepared by solvent evaporation method and coated with various mucoadhesive polymers, in particular chitosan, sodium alginate and poloxamers. The size of chitosan-coated nanoparticles was larger than the size of all the other particles obtained. Their surface charge was changed from negative (-22.8 mV) to positive (+61.0 mV). The interaction between mucin and chitosan-coated nanoparticles took place up to six hours according to turbidimetric study. The positive charge of chitosan-coated nanoparticles decreased significantly six hours after incubation in mucin dispersion, which was attributed to their electrostatic interaction. The coating with chitosan could be considered useful approach aiming to prolong nanoparticle residence time after local ocular application.

Multi-slice computed tomography with N1177 identifies ruptured atherosclerotic plaques in rabbits.

Rupture-prone and ruptured plaques are characterized by the presence of large numbers of macrophages. N1177 is a contrast agent consisting of iodinated nanoparticles that are selectively phagocytosed by macrophages. The aim of this study was to investigate the effect of N1177 on the CT attenuation of rupture-prone and ruptured plaques in rabbits. In addition, we examined in vitro whether uptake of N1177 occurred without cytotoxic or pro-inflammatory effects on macrophages. In vitro, the viability of J774 macrophages was not affected by treatment with N1177. Moreover, N1177 had no effect on the phagocytic capacity or cytokine production of macrophages. For the in vivo experiments, 6 New Zealand White rabbits were fed a cholesterol-supplemented diet for 12-15 months, resulting in the development of large atherosclerotic plaques that resembled rupture-prone plaques in humans. In three rabbits, mechanical plaque rupture was induced by retrograde pullback of an embolic protection device. N1177 had no effect on the median density of rupture-prone plaques [35 HU (range 3-85) before injection vs. 32 HU (range 1-93) 2 h after injection of N1177; P > 0.05]. However, after induction of mechanical plaque rupture, the median density of the atherosclerotic plaques increased from 40 HU (range 6-86) before injection to 74 HU (range 14-111) 2 h after injection of N1177 (P < 0.001). Using time-of-flight static secondary ion mass spectrometry, the presence of N1177 nanoparticles was demonstrated in macrophage-rich areas of ruptured plaques, but not of non-ruptured plaques. In conclusion, our results show that N1177 is a contrast agent that can identify ruptured atherosclerotic plaques.

Microneedles for transdermal drug delivery: a minireview.

The stratum corneum is the main barrier for transdermal drug transport. It could be bypassed by microneedles, which have a length of a few tens to a few hundreds of microns. They are usually arranged in arrays and can be used in several ways to enhance transdermal drug transport. Microneedles can be inserted into the skin in order to increase its permeability, after which the drug is applied (poke with patch). Drugs could also be coated onto the microneedles and be inserted into the skin (coat and poke). Hollow microneedles are used to inject drug solutions in to the skin. This review aims to discuss recently published in vivo and in vitro studies on microneedle aided transdermal drug delivery.

Adhesion of PLGA or Eudragit/PLGA nanoparticles to Staphylococcus and Pseudomonas.

The aim of present study was to examine whether cationic Eudragit containing poly(lactide-co-glycolide) (PLGA) nanoparticles can adhere to Pseudomonas aeruginosa and Staphylococcus aureus. In order to prepare fluorescent nanoparticles, fluorescein was covalently coupled to PLGA. Fluorescent PLGA and Eudragit/PLGA nanoparticles were prepared by w/o/w emulsification solvent evaporation. Particle size and zeta potential of the nanoparticles were measured. Nanoparticles were incubated for a short time with P. aeruginosa and S. aureus followed by measurement of the size of nanoparticles and of P. aeruginosa and S. aureus with and without adherent nanoparticles. Flow cytometric measurements were performed to detect the attachment of particles to microorganisms. Eudragit containing nanoparticles possessed a positive zeta potential, while PLGA nanoparticles were negatively charged. Following adsorption of Eudragit containing nanoparticles, a size increase for P. aeruginosa was observed. Flow cytometric analyses confirmed that Eudragit containing particles showed stronger interactions with the test organisms than PLGA nanoparticles. Adhesion of particles was more pronounced for P. aeruginosa than for S. aureus. Cationic Eudragit containing nanoparticles showed better adhesion to microorganisms than anionic PLGA nanoparticles, which is probably due to enhanced electrostatic interactions.

Cytotoxicity of submicron emulsions and solid lipid nanoparticles for dermal application.

The cytotoxicity and physical properties of various submicron O/W emulsions and solid lipid nanoparticles for dermal applications were investigated. Droplet size and zetapotential of submicron emulsions depended on the composition of the cosurfactant blend used. The viability of J774 macrophages, mouse 3T3 fibroblasts and HaCaT keratinocytes was significantly reduced in the presence of stearylamine. Nanoparticles consisting of stearic acid or different kinds of adeps solidus could be manufactured when formulated with lecithin, sodium taurocholate, polysorbate 80 and stearylamine. Survival of macrophages was highly affected by stearic acid and stearylamine. In general a viability of more than 90% was observed when semi-synthetic glycerides or hard fat was employed to formulate nanoparticles.

Optimisation of HPMC ophthalmic inserts with sustained release properties as a carrier for thermolabile therapeutics.

A methodology was developed and optimised for the preparation of a new drug delivery system (DDS) with sustained release properties to allow ocular protein delivery and to limit destructive production steps during manufacturing. Elevated temperatures, shear forces and an oxidative environment should be avoided in order to prevent denaturation or oxidation of proteins. An aqueous HPMC solution was prepared using heat and casted into small semi-rod-shaped PVC blisters. The polymer solution was allowed to cool down and was partially dehydrated at room temperature. A drug solution containing glycerol, drug and water was subsequently added to rehydrate the partially dehydrated polymer matrix at a temperature of 2°C. Several parameters of the production process were varied to determine their influence on the release kinetics from HPMC inserts from three different molecules of different molecular weight. This production method was further optimised in order to shorten the rehydration time from weeks to days, while eliminating heat and shear forces on the selected drug molecules sodium fluorescein, lysozyme and albumin. Slow release kinetics were achieved for sodium fluorescein and lysozyme as model drug molecules. The higher molecular weight of albumin prevented a good penetration into the insert during the rehydration process resulting in predominantly burst release. The biocompatibility of a viscous HPMC solution was evaluated on SV40-human corneal epithelial cells with PrestoBlue® and no cytotoxic effects were observed.

Evaluation of ciprofloxacin-loaded Eudragit RS100 or RL100/PLGA nanoparticles.

The objective of present study was to prepare positively charged ciprofloxacin-loaded nanoparticles providing a controlled release formulation. The particles were prepared by water-in-oil-in-water (w/o/w) emulsification and solvent evaporation, followed by high-pressure homogenisation. Two non-biodegradable positively charged polymers, Eudragit RS100 and RL100, and the biodegradable polymer poly(lactic-co-glycolic acid) or PLGA were used alone or in combination, with varying ratios. The formulations were evaluated in terms of particle size and zeta potential. Differential scanning calorimetry measurements were carried out on the nanoparticles and on the pure polymers Eudragit and PLGA. Drug loading and release properties of the nanoparticles were examined. The antimicrobial activity against Pseudomonas aeruginosa and Staphylococcus aureus was determined. During solvent evaporation, the size and zeta potential of the nanoparticles did not change significantly. The mean diameter was dependent on the presence of Eudragit and on the viscosity of the organic phase. The zeta potential of all Eudragit containing nanoparticles was positive in ultrapure water (around +21/+25 mV). No burst effect but a prolonged drug release was observed from all formulations. The particles' activity against P. aeruginosa and S. aureus was comparable with an equally concentrated ciprofloxacin solution.

The use of mucoadhesive polymers in ocular drug delivery.

In the present update on mucoadhesive ocular dosage forms, the tremendous advances in the biochemistry of mucins, the development of new polymers, the use of drug complexes and other technological advances are discussed. This review focusses on recent literature regarding mucoadhesive liquid (viscous solutions, particulate systems), semi-solid (hydrogel, in situ gelling system) and solid dosage forms, with special attention to in vivo studies. Gel-forming minitablets and inserts made of thiomers show an interesting potential for future applications in the treatment of ocular diseases.

Effects of roller compaction settings on the preparation of bioadhesive granules and ocular minitablets.

An experimental factorial design was employed to evaluate bioadhesive granules and bioerodible ocular minitablets (6 mg and Psi 2 mm). The purpose of this study was to compare minitablets prepared using roller compacted granules with an optimised minitablet formulation, manufactured on laboratory scale by direct compression. The formulation consisted of drum dried waxy maize starch, Carbopol 974P, and ciprofloxacin in a ratio of 90.5/5/3 (w/w/w). Three roller compactor parameters were varied, i.e. the roller speed, the horizontal screw speed and the compaction force, while the vertical screw speed was kept constant. Afterwards, the ribbons were milled to obtain granules suitable for compression. The friability, the flow properties, the bulk material characteristics (apparent and tap density and porosity) and the particle size distributions of two granule sieve fractions (90-125 and 125-355 microm) were investigated. The roller speed and the compaction force have the largest influence on the granule characteristics, followed by the horizontal screw speed. The physical properties of non- and gamma-irradiated minitablets were determined. From the tablet strength, friability and dissolution results, a low compaction force and a high roller speed were shown to be preferable to prepare granules which can be further tabletted into adequate ocular minitablets.

Evaluation of a newly developed HPMC ophthalmic insert with sustained release properties as a carrier for thermolabile therapeutics.

A novel drug delivery system (DDS) with sustained release properties was developed to allow ocular protein delivery. The DDS developed is aimed at overcoming stability issues during preparation such as denaturation of proteins caused by shear forces applied or due to elevated temperatures and air entrapment potentially causing oxidation of the molecule. The rod-shaped HPMC inserts were loaded with lysozyme and several HPMC types were studied and compared. An aqueous colloidal HPMC solution (hydrogel) was prepared and subsequently dried at 150°C to dehydrate the polymer solution. This partially dehydrated polymer cylinder was loaded with an aqueous glycerol/lysozyme solution at 2°C. A 2(4) full factorial design was set up to evaluate the effect of the different preparation parameters on water uptake and release properties. As a result, four out of sixteen formulations revealed homogenous distribution for lysozyme in both duplicates. The change in water uptake over time was dependent on the type of HPMC polymer used but not between the chosen HPMC percentages. After 240min, 50% of lysozyme loaded was released depending on the chosen formulation. Lysozyme molecules exhibit slower release from a K100M matrix compared to E10M inserts, albeit the overall effect is relatively limited.

Ocular bioerodible minitablets as strategy for the management of microbial keratitis.

PURPOSE: Evaluation in volunteers of ciprofloxacin-containing ocular gelling minitablets with prolonged release properties. METHODS: The irritation potential of ciprofloxacin-containing bioadhesive powder mixtures, used to prepare ocular bioerodible minitablets, was evaluated with a slug mucosal-irritation test. The tear pharmacokinetic profiles of ciprofloxacin were determined in six healthy volunteers after topical administration of a minitablet and a single eye drop in the lower fornix. The drug concentrations in the tear samples collected were measured by using a validated HPLC METHOD: Each volunteer was asked to give an evaluation of the preparations applied by answering a standard questionnaire. RESULTS: The results of the mucosal-irritation test demonstrated the nonirritating properties of the bioadhesive powder mixtures. The ocular minitablet, applied in the fornix was in general well tolerated by the healthy volunteers. The mean tear concentration of ciprofloxacin was 33.0, 135.2, and 33.7 microg/g at 30, 300, and 480 minutes after application of the minitablet. Mean tear levels of 84.7, 45.6, and 8.4 microg/g were obtained at 5, 30, and 60 minutes after application of an eye drop. CONCLUSIONS: Due to their prolonged drug release properties, the ocular minitablets containing ciprofloxacin can be considered as a promising drug delivery system to be used in the treatment of ulcerative bacterial keratitis.

Determinants of eye drop size.

Ophthalmic solutions are available for multidose or single-dose administration in a wide variety of glass and plastic dropper bottles which deliver drops with a volume between 25 and 70 microl. From a biopharmaceutical and economic point of view, however, smaller volumes of 5 to 15 microl should be instilled. In this review, the technical, pharmaceutical, and therapeutic aspects of eye drop formation and delivery are presented. The different types of containers are described and the determinants of eye drop size are discussed, such as the design and physical characteristics of the dropper tip and bottle, the physico-chemical properties of the solution, and the manner in which the patient dispenses the drops. Preferred and alternative instillation techniques and aids to facilitate the administration of eye drops by elderly patients are described.

Mucoadhesive ocular insert based on thiolated poly(acrylic acid): development and in vivo evaluation in humans.

The aim of the study was to develop a mucoadhesive ocular insert for the controlled delivery of ophthalmic drugs and to evaluate its efficacy in vivo. The inserts tested were based either on unmodified or thiolated poly(acrylic acid). Water uptake and swelling behavior of the inserts as well as the drug release rates of the model drugs fluorescein and two diclofenac salts with different solubility properties were evaluated in vitro. Fluorescein was used as fluorescent tracer to study the drug release from the insert in humans. The mean fluorescein concentration in the cornea/tearfilm compartment as a function of time was determined after application of aqueous eye drops and inserts composed of unmodified and of thiolated poly(acrylic acid). The acceptability of the inserts by the volunteers was also evaluated. Inserts based on thiolated poly(acrylic acid) were not soluble and had good cohesive properties. A controlled release was achieved for the incorporated model drugs. The in vivo study showed that inserts based on thiolated poly(acrylic acid) provide a fluorescein concentration on the eye surface for more than 8 h, whereas the fluorescein concentration rapidly decreased after application of aqueous eye drops or inserts based on unmodified poly(acrylic acid). Moreover, these inserts were well accepted by the volunteers. The present study indicates that ocular inserts based on thiolated poly(acrylic acid) are promising new solid devices for ocular drug delivery.

Optimisation of carbomer viscous eye drops: an in vitro experimental design approach using rheological techniques.

The optimisation of the in vitro interaction between several poly(acrylic acid) derivatives (Carbopol 1342P NF, Carbopol 974P and Carbopol 980 NF) and mucin was performed by an analysis technique combining oscillatory shear rheology and experimental design in order to improve the formulation of carbomer viscous eye drops.First, standard oscillation procedures were used to characterise the polyacrylic acid and mucin dispersions, and to investigate the influence of several polymer-related factors (concentration, preparation, type of polymer used) on the rheological properties. Second, an experimental plan design was developed to investigate the effect of polymer-related factors on the mucoadhesive indexes (MAI(G') and MAI(G")) which were calculated using the viscoelastic data obtained from polymer/mucin, polymer/tearfluid and mucin/tearfluid mixtures. Optimal mucoadhesive interactions were determined based on the experimental design results. Finally, the optima were fully characterised rheologically to further verify the mucoadhesive capacity. The main conclusion is that the factor influencing most explicitly the mucoadhesive interaction of the viscous eye drop is the mucin concentration and neither the type of polyacrylic acid, nor its concentration.

The influence of the use of viscosifying agents as dispersion media on the drug release properties from PLGA nanoparticles.

Poly(lactide-co-glycolide) nanoparticles incorporating ciprofloxacin HCl were prepared by means of a W/O/W emulsification solvent evaporation method. The physicochemical properties of these particles were evaluated by measuring particle size, zeta potential and drug loading efficiency. Gamma-sterilised nanoparticles were dispersed in different isoviscous polymer solutions, commonly used as vehicles in eye drops. The influence of gamma-irradiation of the viscosifying agents on the drug release properties of the dispersed nanoparticles was evaluated with respect to release in mannitol solution. The viscosity of the polymer solutions prepared was measured by flow rheometry and thereby the influence of temperature and sterilisation by autoclaving on viscosity was examined. Before and after freeze-drying and subsequent sterilisation by gamma-irradiation, the polymer solutions were also characterised by dynamic stress sweep and dynamic frequency sweep oscillation measurements to deduce possible structural changes. A possible relationship between the differences in ciprofloxacin release from the nanoparticles suspended in the various media and the network structure or rheological behaviour of the polymers was investigated.

The use of xanthan gum in an ophthalmic liquid dosage form: rheological characterization of the interaction with mucin.

The development of an ocular dosage form containing xanthan gum and capable of interacting with mucin in the precorneal area is a challenge. The polymer concentration that can be applied is restricted because of the limited patient acceptability of highly viscous preparations. The precorneal mucin concentration is low and the high ionic strength of the lachrymal fluid forces xanthan gum in an ordered structure, less capable of interacting through heterotypic junctions. Intrinsic viscosity measurements and shear rheometry are used to investigate the effect of several factors (polymer concentration, additional boiling or sonication step to the preparation procedure) on the physicochemical properties of xanthan gum and the degree of interaction with a low (8%, w/v) and high (16.0%, w/v) concentrated mucin dispersion. Independent of the preparation procedure applied, a xanthan gum concentration of 1.0% (w/v) is required to obtain a measurable interaction with mucin. If an extra boiling or sonication step is added to the standard preparation procedure, the minimum mucin concentration necessary to achieve formation of heterotypic junctions is decreased. Only by sonication of the highly concentrated xanthan gum dispersion is the viscosity decreased to a level that is tolerable and comfortable to the patient. The findings of the present study clearly demonstrate that a significant interaction between a tolerable and comfortable ocular dosage form containing xanthan gum, and mucin 8% (w/v), is feasible after sonication of a highly concentrated polymer dispersion.

Factorial design, physicochemical characterisation and activity of ciprofloxacin-PLGA nanoparticles.

Poly(lactide-co-glycolide) nanoparticles incorporating ciprofloxacin HCl were prepared by means of a W/O/W emulsification solvent evaporation method. The stabiliser selected was poly(vinylalcohol). A 2(4) full factorial design based on four independent variables was used to plan the experiments and the variable parameters were the number of homogenisation cycles, addition of boric acid to the inner water phase containing the drug, ciprofloxacin concentration in the inner water phase and oil:outer water phase ratio. The effects of these parameters on the particle size, zeta potential, drug loading efficiency and drug release were investigated. Also the effect of gamma irradiation on the particle size and drug release was evaluated and DSC and XRD analyses of the compounds and the nanoparticles were performed. The activity on two series of microorganisms, Pseudomonas aeruginosa and Staphylococcus aureus, was examined.

Development and characterization of mucoadhesive chitosan films for ophthalmic delivery of cyclosporine A.

Ocular chitosan films were prepared in order to prolong ocular delivery of cyclosporine A. The mucoadhesive films were prepared using the solvent casting evaporation method. A 2(4) full factorial design was used to evaluate the effect of 4 preparation parameters on the film thickness, swelling index and mechanical properties. Moreover, uniformity of content and in vitro drug release were investigated. Possible interactions between the film excipients were studied by FTIR analysis. In vitro experiments were performed in order to evaluate the cytotoxicity and anti-inflammatory activity of the chitosan films. Film thickness, water uptake, mechanical properties and in vitro release of cyclosporine A were dependent on film composition, especially on the amount of plasticizer. Lower drug release was measured from chitosan films containing a higher amount of plasticizer as glycerol decreased the swelling of chitosan films. FTIR spectra suggest a reorganization of hydrogen bonds between chitosan chains in the presence of glycerol and cyclodextrins. None of the film formulations showed significant cytotoxicity as compared to the negative control using human epithelial cells (HaCaT). Cyclosporine A dispersed in the various film formulations remained anti-inflammatorily active as significant suppression of interleukin-2 secretion in concanavalin A stimulated Jurkat T cells was measured.

Full factorial design, physicochemical characterisation and biological assessment of cyclosporine A loaded cationic nanoparticles.

Cyclosporine A loaded poly(lactide-co-glycolide) nanoparticles coated with chitosan were prepared using the o/w emulsification solvent evaporation method. A 2(3) full factorial design was used to investigate the effect of 3 preparation parameters on the particle size, polydispersity index, zeta potential and drug release. In vitro experiments were performed in order to evaluate the cytotoxicity and anti-inflammatory activity of the developed nanoparticles. Particle sizes varied from 156 nm to 314 nm, and polydispersity index values of 0.07-0.56 were obtained depending on the different preparation parameters. All nanoparticles showed positive zeta potential values. Nanoparticles prepared with the highest concentration chitosan retained a positive zeta potential after dispersion in simulated lachrymal fluid, which supports the possibility of an electrostatic interaction between these particles and the negatively charged mucus layer at the eye. The in vitro release profile of cyclosporine A from the chitosan-coated nanoparticles was strongly dependent on the release medium used. None of the cationic nanoparticle formulations showed significant cytotoxicity compared to the negative control using human epithelial cells (HaCaT). Cyclosporine A encapsulated in the various nanoparticle formulations remained anti-inflammatory active as significant suppression of interleukine-2 secretion in concanavalin A stimulated Jurkat T cells was observed.

Development and characterization of Cyclosporine A loaded nanoparticles for ocular drug delivery: Cellular toxicity, uptake, and kinetic studies.

Dry eye syndrome is a common disorder of the tear film caused by decreased tear production or increased evaporation. The objective of this study was to evaluate the potential effectiveness of Cyclosporine A (CsA) nanoparticles (NPs) for the treatment of inflammation of the eye surface. Topical CsA is currently the only and safe pharmacologic treatment of severe dry eye symptoms. The NPs were prepared using either poly-lactide-co-glycolide (PLGA) or a mixture of PLGA with Eudragit®RL or were coated with Carbopol®. The mean size of CsA loaded NPs was within the range from 148 to 219nm, except for the Carbopol® coated NPs (393nm). The drug entrapment efficiency was very high (from 83 to 95%) and production yield was found between 75 and 92% in all preparations. The zeta potential of the Eudragit® RL containing NPs was positive (19-25mV). The NPs formulations exhibited a biphasic drug release with initial burst followed by a very slow drug release and total cumulative release within 24h ranged from 75 to 90%. Kinetically, the release profiles of CsA from NPs appeared to fit best with the Weibull model. The viability of L929 cells was decreased by increasing the concentration of the various NPs examined as well as the incubation time. The amount of NPs uptake was related to the polymer type used. The highest degree of cellular uptake (52.2%), tear film concentration of the drug (366.3ng/g) and AUC(0→24) (972.6ngh/g) value were obtained from PLGA: Eudragit® RL (75:25)-CsA NPs formulations. The change of surface characteristics of NPs represents a useful approach for improvement of ocular retention and drug availability.