Multiple Bonding Between Group†3 Metals and Fe(CO)3.

Heteronuclear Group 3 metal/iron carbonyl anion complexes ScFe(CO)3 - , YFe(CO)3 - , and LaFe(CO)3 - are prepared in the gas phase and studied by mass-selective infrared (IR) photodissociation spectroscopy as well as quantum-chemical calculations. All three anion complexes are characterized to have a metal-metal-bonded C3v equilibrium geometry with all three carbonyl ligands bonded to the iron center and a closed-shell singlet electronic ground state. Bonding analyses reveal that there are multiple bonding interactions between the bare group-3 elements and the Fe(CO)3 - fragment. Besides one covalent electron-sharing metal-metal σ bond and two dative π bonds from Fe to the Group 3 metal, there is additional multicenter covalent bonding with the Group 3 atom bonded to Fe and the carbon atoms.

Octacarbonyl Ion Complexes of Actinides [An(CO)8 ]+/- (An=Th, U) and the Role of f Orbitals in Metal-Ligand Bonding.

The octacarbonyl cation and anion complexes of actinide metals [An(CO)8 ]+/- (An=Th, U) are prepared in the gas phase and are studied by mass-selected infrared photodissociation spectroscopy. Both the octacarbonyl cations and anions have been characterized to be saturated coordinated complexes. Quantum chemical calculations by using density functional theory show that the [Th(CO)8 ]+ and [Th(CO)8 ]- complexes have a distorted octahedral (D4h ) equilibrium geometry and a doublet electronic ground state. Both the [U(CO)8 ]+ cation and the [U(CO)8 ]- anion exhibit cubic structures (Oh ) with a 6 A1g ground state for the cation and a 4 A1g ground state for the anion. The neutral species [Th(CO)8 ] (Oh ; 1 A1g ) and [U(CO)8 ] (D4h ; 5 B1u ) have also been calculated. Analysis of their electronic structures with the help on an energy decomposition method reveals that, along with the dominating 6d valence orbitals, there are significant 5f orbital participation in both the [An]←CO σ donation and [An]→CO π back donation interactions in the cations and anions, for which the electronic reference state of An has both occupied and vacant 5f AOs. The trend of the valence orbital contribution to the metal-CO bonds has the order of 6d≫5f>7s≈7p, with the 5f orbitals of uranium being more important than the 5f orbitals of thorium.

Alkali Metal Covalent Bonding in Nickel Carbonyl Complexes ENi(CO)3.

The alkali metal-nickel carbonyl anions ENi(CO)3 - with E=Li, Na, K, Rb, Cs have been produced and characterized by mass-selected infrared photodissociation spectroscopy in the gas phase. The molecules are the first examples of 18-electron transition metal complexes with alkali atoms as covalently bonded ligands. The calculated equilibrium structures possess C3v geometry, where the alkali atom is located above a nearly planar Ni(CO)3 - fragment. The analysis of the electronic structure reveals a peculiar bonding situation where the alkali atom is covalently bonded not only to Ni but also to the carbon atoms.

Triple Bonds Between Iron and Heavier Group 15 Elements in AFe(CO)3- (A=As, Sb, Bi) Complexes.

Heteronuclear transition-metal-main-group-element carbonyl complexes of AsFe(CO)3- , SbFe(CO)3- , and BiFe(CO)3- were produced by a laser vaporization supersonic ion source in the gas phase, and were studied by mass-selected IR photodissociation spectroscopy and advanced quantum chemistry methods. These complexes have C3v structures with all of the carbonyl ligands bonded on the iron center, and feature covalent triple bonds between bare Group 15 elements and Fe(CO)3- . Chemical bonding analyses on the whole series of AFe(CO)3- (A=N, P, As, Sb, Bi, Mc) complexes indicate that the valence orbitals involved in the triple bonds are hybridized 3d and 4p atomic orbitals of iron, leading to an unusual (dp-p) type of transition-metal-main-group-element multiple bonding. The σ-type three-orbital interaction between Fe 3d/4p and Group 15 np valence orbitals plays an important role in the bonding and stability of the heavier AFe(CO)3- (A=As, Sb, Bi) complexes.

CO Oxidation by Group 3 Metal Monoxide Cations Supported on [Fe(CO)4 ]2.

Infrared photodissociation spectroscopy of mass-selected heteronuclear cluster anions in the form of OMFe(CO)5- (M=Sc, Y, La) indicates that all these anions involve an 18-electron [Fe(CO)4 ]2- building block that is bonded with the M center through two bridged carbonyl ligands. The OLaFe(CO)5- anion is determined to be a CO-tagged complex involving a [Fe(CO)4 ]2- [LaO]+ anion core. In contrast, the OYFe(CO)5- anion is characterized to have a [Fe(CO)4 ]2- [Y(η2 -CO2 )]+ structure involving a side-on bonded CO2 ligand. The CO-tagged complex and the [Fe(CO)4 ]2- [Sc(η2 -CO2 )]+ isomer co-exist for the OScFe(CO)5- anion. These observations indicate that both the ScO+ and YO+ cations supported on [Fe(CO)4 ]2- are able to oxidize CO to CO2 . Theoretical analyses show that [Fe(CO)4 ]2- coordination significantly weakens the MO+ bond and decreases the energy gap of the interacting valence orbitals between MO+ and CO, leading to the CO oxidation reactions being both thermodynamically exothermic and kinetically facile.

Preparation and Characterization of Uranium-Iron Triple-Bonded UFe(CO)3- and OUFe(CO)3- Complexes.

We report the preparation of UFe(CO)3- and OUFe(CO)3- complexes using a laser-vaporization supersonic ion source in the gas phase. These compounds were mass-selected and characterized by infrared photodissociation spectroscopy and state-of-the-art quantum chemical studies. There are unprecedented triple bonds between U 6d/5f and Fe 3d orbitals, featuring one covalent σ bond and two Fe-to-U dative π bonds in both complexes. The uranium and iron elements are found to exist in unique formal U(I or III) and Fe(-II) oxidation states, respectively. These findings suggest that there may exist a whole family of stable df-d multiple-bonded f-element-transition-metal compounds that have not been fully recognized to date.

UTSA-74: A MOF-74 Isomer with Two Accessible Binding Sites per Metal Center for Highly Selective Gas Separation.

A new metal-organic framework Zn2(H2O)(dobdc)·0.5(H2O) (UTSA-74, H4dobdc = 2,5-dioxido-1,4-benzenedicarboxylic acid), Zn-MOF-74/CPO-27-Zn isomer, has been synthesized and structurally characterized. It has a novel four coordinated fgl topology with one-dimensional channels of about 8.0 Å. Unlike metal sites in the well-established MOF-74 with a rod-packing structure in which each of them is in a five coordinate square pyramidal coordination geometry, there are two different Zn(2+) sites within the binuclear secondary building units in UTSA-74 in which one of them (Zn1) is in a tetrahedral while another (Zn2) in an octahedral coordination geometry. After activation, the two axial water molecules on Zn2 sites can be removed, generating UTSA-74a with two accessible gas binding sites per Zn2 ion. Accordingly, UTSA-74a takes up a moderately high and comparable amount of acetylene (145 cm(3)/cm(3)) to Zn-MOF-74. Interestingly, the accessible Zn(2+) sites in UTSA-74a are bridged by carbon dioxide molecules instead of being terminally bound in Zn-MOF-74, so UTSA-74a adsorbs a much smaller amount of carbon dioxide (90 cm(3)/cm(3)) than Zn-MOF-74 (146 cm(3)/cm(3)) at room temperature and 1 bar, leading to a superior MOF material for highly selective C2H2/CO2 separation. X-ray crystal structures, gas sorption isotherms, molecular modeling, and simulated and experimental breakthroughs comprehensively support this result.

Observation of Spontaneous C=C Bond Breaking in the Reaction between Atomic Boron and Ethylene in Solid Neon.

A ground-state boron atom inserts into the C=C bond of ethylene to spontaneously form the allene-like compound H2 CBCH2 on annealing in solid neon. This compound can further isomerize to the propyne-like HCBCH3 isomer under UV light excitation. The observation of this unique spontaneous C=C bond insertion reaction is consistent with theoretical predictions that the reaction is thermodynamically exothermic and kinetically facile. This work demonstrates that the stronger C=C bond, rather than the less inert C-H bond, can be broken to form organoboron species from the reaction of a boron atom with ethylene even at cryogenic temperatures.

Infrared photodissociation spectroscopy of mass-selected heteronuclear iron-copper carbonyl cluster anions in the gas phase.

Mass-selected heteronuclear iron-copper carbonyl cluster anions CuFe(CO)n(-) (n = 4-7) are studied by infrared photodissociation spectroscopy in the carbonyl stretching frequency region in the gas phase. The cluster anions are produced via a laser vaporization supersonic cluster ion source. Their geometric structures are determined by comparison of the experimental spectra with those calculated by density functional theory. The experimentally observed CuFe(CO)n(-) (n = 4-7) cluster anions are characterized to have (OC)4Fe-Cu(CO)n-4 structures, each involving a C3v symmetry Fe(CO)4(-) building block. Bonding analysis indicates that the Fe-Cu bond in the CuFe(CO)n(-) (n = 4-7) cluster anions is a σ type single bond with the iron center possessing the most favored 18-electron configuration. The results provide important new insight into the structure and bonding of hetronuclear transition metal carbonyl cluster anions.

Optimization of reaction conditions towards multiple types of framework isomers and periodic-increased porosity: luminescence properties and selective CO2 adsorption over N2.

Three new metal-organic frameworks (MOFs) were prepared by solvo(hydro)thermolysis and further characterized as framework isomers. The structural transformation from non-porous to porous MOFs and the purity of these products can be modulated by controlling the reaction temperature. The periodic-increased porosity observed was further confirmed by CO2 adsorption isotherms. Owing to the presence of acylamide groups in the pore walls and the flexible nature of the skeleton of these MOFs, highly selective CO2 adsorption over N2 was observed, as well as structure-dependent periodic varieties in luminescence properties.

Extractive electrospray ionization mass spectrometry for sensitive detection of uranyl species in natural water samples.

Ambient mass spectrometry has been increasingly applied for sensitive detection of trace organic compounds present in complex matrixes. In the real world, detection of trace amounts of inorganic species, particularly with speciation information, is of great significances. Herein a method based on extractive electrospray ionization (EESI) tandem mass spectrometry (MS/MS) has been established for rapid detection of radioactive inorganic species in natural water samples. Negatively charged uranyl acetate undergoes characteristic fragmentation in the gas phase, providing the fundamental chemistry for specific detection of uranyl species in complex matrixes without sample pretreatment. Under the optimized experimental conditions, uranyl species in various natural water samples were rapidly detected using multiple-stage EESI mass spectrometry. The mean time for each sample analysis was about 10 s. The limit of detection was about a few 10(-3) ng/L of uranium by utilizing the characteristic fragments obtained in the EESI-MS(3) experiments. The typical relative standard deviation (RSD) of this method was 6.9-8.1% for 8 measurements (S/N = 3). The dynamic response range was 10(-1)-10(3) ng/L for uranium in water samples. The isotope ratio of uranyl species was quantitatively detected using EESI-MS experiments. The results show that EESI-MS, a typical method initially developed for organic compound analysis, has promising perspectives for real time, online monitoring of inorganic species such as uranyl species in natural water samples.

Triple bonds between iron and heavier group-14 elements in the AFe(CO)3- complexes (A = Ge, Sn, and Pb).

Heteronuclear transition-metal-main-group element carbonyl anion complexes of AFe(CO)3- (A = Ge, Sn, and Pb) are prepared using a laser vaporization supersonic ion source in the gas phase, which were studied by mass-selected infrared (IR) photodissociation spectroscopy. The geometric and electronic structures of the experimentally observed species are identified by a comparison of the measured and calculated IR spectra. These anion complexes have a 2A1 doublet electronic ground state and feature an A[triple bond, length as m-dash]Fe triply bonded C3v structure with all of the carbonyl ligands bonded at the iron center. Bonding analyses of AFe(CO)3- (A = C, Si, Ge, Sn, Pb, and Fl) indicate that the complexes are triply bonded between the valence np atomic orbitals of bare group-14 atoms and the hybridized 3d and 4p atomic orbitals of iron.

Quadruple bonding between iron and boron in the BFe(CO)3- complex.

While main group elements have four valence orbitals accessible for bonding, quadruple bonding to main group elements is extremely rare. Here we report that main group element boron is able to form quadruple bonding interactions with iron in the BFe(CO)3- anion complex, which has been revealed by quantum chemical investigation and identified by mass-selected infrared photodissociation spectroscopy in the gas phase. The complex is characterized to have a B-Fe(CO)3- structure of C3v symmetry and features a B-Fe bond distance that is much shorter than that expected for a triple bond. Various chemical bonding analyses indicate that the complex involves unprecedented B≣Fe quadruple bonding interactions. Besides the common one electron-sharing σ bond and two Fe→B dative π bonds, there is an additional weak B→Fe dative σ bonding interaction. This finding of the new quadruple bonding indicates that there might exist a wide range of boron-metal complexes that contain such high multiplicity of chemical bonds.

Determination of trace lithium in uranium compounds by adsorption on activated alumina using a micro-column method.

A novel method using a micro-column packed with active alumina as solid phase was proposed for separation of trace lithium from uranium compounds prior to determination. The method is based on a preliminary chromatographic separation of the total amount of uranium. This separation involves passing the solution containing sodium carbonate through active alumina and then eluting the trace lithium retained by the solid phase with a solution of sulfuric acid. Two modes, off-line and on-line micro-column preconcentration, were performed. In conjunction with atomic absorption spectrometry, this on-line preconcentration technique allows a determination of lithium at 10(-9) level. Both off-line and on-line mode operation conditions were investigated in separation and determination of trace lithium by micro-column method (length of column bed, flow rate, etc.). The adsorption capacity of activated alumina was found to be 343 microg g(-1) for lithium. Under the optimal operation condition, the detection limit (DL) of on-line preconcentration corresponding to three times the standard deviation of the blank (S/N = 3) was found to be 1.3 ng mL(-1) and the RSD of this method is 3.32% (n = 5). The on-line calibration graph was linear over the range 20 - 200 ng mL(-1). A good preconcentration factor 820 was achieved by experiment under the on-line mode. The developed method was applied to the analysis of trace lithium in nuclear grade uranium compounds.

Study of heavy metal speciation in branch sediments of Poyang Lake.

This study concentrates on the environmental pollution level of sediments in the six branches of Poyang Lake, the biggest fresh water lake in China. This is the first systematic report on the speciation analysis of heavy metals (Cu, Co, Cd, Pb, and Ni) in the six branches of the lake. A reported analytical procedure involving a five-step sequential extraction is used for the partition of particulating heavy metals. The sediment samples are analyzed using flame atomic absorption spectroscopy (FAAS). Experimental results obtained from five replicate samples of fluvial bottom surface sediments at the sampling points demonstrated that the relative standard deviation of the sequential extraction procedure was generally better than 10% (Cd except). The average extracted contents of the five elements, analyzed after all five steps, are found to be (mg/kg) for Cu: 26.89, Co: 16.25, Cd: 1.08, Pb: 37.98, and Ni: 20.46. The content of the exchangeable species was generally lower. Except Cu, the percentage of the species bond to organic matter was lower than 20%. The fractions containing the most metal for Cu, Co, and Ni were the residues (52.26%, 45.28%, and 74.82%, respectively).

Surface desorption atmospheric pressure chemical ionization mass spectrometry for direct ambient sample analysis without toxic chemical contamination.

Ambient mass spectrometry, pioneered with desorption electrospray ionization (DESI) technique, is of increasing interest in recent years. In this study, a corona discharge ionization source is adapted for direct surface desorption chemical ionization of compounds on various surfaces at atmospheric pressure. Ambient air, with about 60% relative humidity, is used as a reagent to generate primary ions such as H(3)O(+), which is then directed to impact the sample surface for desorption and ionization. Under experimental conditions, protonated or deprotonated molecules of analytes present on various samples are observed using positive or negative corona discharge. Fast detection of trace amounts of analytes present in pharmaceutical preparations, viz foods, skins and clothes has been demonstrated without any sample pretreatment. Taking the advantage of the gasless setup, powder samples such as amino acids and mixtures of pharmaceutical preparations are rapidly analyzed. Impurities such as sudan dyes in tomato sauce are detected semiquantitatively. Molecular markers (e.g. putrescine) for meat spoilage are successfully identified from an artificially spoiled fish sample. Chemical warfare agent stimulants, explosives and herbicides are directly detected from the skin samples and clothing exposed to these compounds. This provides a detection limit of sub-pg (S/N > or = 3) range in MS2. Metabolites and consumed chemicals such as glucose are detected successfully from human skins. Conclusively, surface desorption atmospheric pressure chemical ionization (DAPCI) mass spectrometry, without toxic chemical contamination, detects various compounds in complex matrices, showing promising applications for analyses of human related samples.

Manipulation of charge states of biopolymer ions by atmospheric pressure ion/molecule reactions implemented in an extractive electrospray ionization source.

A home-made extractive electrospray ionization source is coupled to an linear quadrupole ion trap mass spectrometer to investigate ion/molecule reactions of biopolymers at ambient pressure. Multiply charged biopolymers such as peptides and proteins generated in an electrospray are easily reduced to a low charge state by the atmospheric pressure ion/molecule reactions occurring between the multiply charged ions and a strong basic reagent sprayed in neutral form into the electrospray plume. The charge state of the biopolymer ions can be manipulated by controlling the amount of the basic reagent. The production of biopolymer ions with low charge states results in a substantial improvement of sensitivity and reduced spectral congestion in ESI-MS. This is of importance for biopolymer mixture analysis and could have promising applications in proteomics.

A simple and sensitive flow-injection on-line preconcentration coupled with hydride generation atomic fluorescence spectrometry for the determination of ultra-trace lead in water, wine, and rice.

A simple and sensitive flow-injection on-line separation and preconcentration system coupled to hydride generation atomic fluorescence spectrometry (HG-AFS) was developed for ultra-trace lead determination in water, wine, and rice samples, with the salient advantages of its minimization of transition-metal interferences and tolerance to an ethanol matrix. A lead hydroxide precipitate was achieved by the on-line merging of a sample and an ammonium buffer solution and collected onto the inner walls of a knotted reactor (KR). Removal of the residual solution from KR was achieved by air flow, and dissolution of the precipitate was carried out by using 0.2 mol l(-1) HCl. With a sample consumption of 11.7 ml, an enhancement factor of 16 was obtained at a sample throughput of 30 h(-1). The limit of detection (3s) was 16 ng l(-1) and the precision (RSD) for 1.0 microg l(-1) Pb was 3.4%.

An improved method for the extraction of low molecular weight organic acids in variable charge soils.

Due to specific adsorption to variable charge soils, low molecular weight organic acids (LMWOAs) have not been sufficiently extracted, even if common extractants, such as water and 0.1 M sodium hydroxide (NaOH), were employed. In this work, the method for extracting LMWOAs in soils with 0.1 M NaOH was improved for variable charge soils; e.g. 1.0 M potassium fluoride (KF) with pH 4.0 was applied as an extractant jointed with 0.1 M NaOH based on its stronger ability to change the electrochemical properties of variable charge soils by specific adsorption. With the proposed method, the recoveries of oxalic, tartaric, malic, citric and fumaric acids were increased from 83 +/- 4, 93 +/- 1, 22 +/- 2, 63 +/- 5 and 84 +/- 3% to 98 +/- 2, 100 +/- 2, 85 +/- 2, 90 +/- 2 and 89 +/- 2%, respectively, compared with NaOH alone. Simultaneously, the LMWOAs in Agri-Udic Ferrosol with field moisture were measured with a satisfactory result.

Solid phase extraction-spectrophotometric determination of dissolved aluminum in soil extracts and ground waters.

An on-line solid-phase extraction (SPE) technique, linked to spectrophotometry, has been developed to overcome the problem of high matrix concentration, which is thought to interfere with the determination of low levels of aluminum (Al) in environmental samples. Tiron modified resin was prepared and used as a SPE absorbent, which can quantitatively adsorb Al(III) at pH 4-6 with an adsorption capacity of 5.6 mg g(-1) resin. The main advantages of this novel method are: (1) a much higher sensitivity has been obtained by SPE technology; and (2) a large amount of Na(+), K(+), Ca(2+) and Mg(2+) can be removed and the interference of Fe(III), Mn(II) and F(-) can be efficiently eliminated by eluting with 0.25 mol l(-1) NaOH. It is a highly selective and sensitive method for simple and quick determination of dissolved Al in soil extracts and ground waters, particularly suitable for the analysis of complex environmental samples.