RESUMO
Hg(2+) is known to bind very strongly with T-T mismatches in DNA duplexes to form T-Hg(2+)-T base pairs, the structure of which is stabilized by covalent N-Hg bonds and exhibits bonding strength higher than hydrogen bonds. In this work, we exploit exonuclease III (Exo III) activity on DNA hybrids containing T-Hg(2+)-T base pairs and our experiments show that Hg(2+) ions could intentionally trigger the activity of Exo III toward a designed thymine-rich DNA oligonucleotide (e-T-rich probe) by the conformational change of the probe. Our sensing strategy utilizes this conformation-dependent activity of Exo III, which is controlled through the cyclical shuffling of Hg(2+) ions between the solution phase and the solid DNA hybrid. This interesting attribute has led to the development of an ultrasensitive detection platform for Hg(2+) ions with a detection limit of 0.2 nM and a total assay time within minutes. This simple detection strategy could be used for the detection of other metal ions which exhibit specific interactions with natural or synthetic bases.
Assuntos
DNA/química , Técnicas Eletroquímicas , Inibidores Enzimáticos/análise , Exodesoxirribonucleases/metabolismo , Mercúrio/análise , Timina/química , DNA/metabolismo , Ativação Enzimática/efeitos dos fármacos , Inibidores Enzimáticos/farmacologia , Exodesoxirribonucleases/antagonistas & inibidores , Exodesoxirribonucleases/química , Mercúrio/farmacologia , Relação Estrutura-Atividade , Timina/análogos & derivados , Timina/metabolismoRESUMO
Taking advantage of the preferential exodeoxyribonuclease activity of exonuclease III in combination with the difference in diffusivity between an oligonucleotide and a mononucleotide toward a negatively charged ITO electrode, a highly sensitive and selective electrochemical molecular beacon (eMB)-based DNA sensor has been developed. This sensor realizes electrochemical detection of DNA in a homogeneous solution, with sensing signals amplified by an exonuclease III-based target recycling strategy. A hairpin-shaped oligonucleotide containing the target DNA recognition sequence, with a methylene blue tag close to the 3' terminus, is designed as the signaling probe. Hybridization with the target DNA transforms the probe's exonuclease III-inactive protruding 3' terminus into an exonuclease III-active blunt end, triggering the digestion of the probe into mononucleotides including a methylene blue-labeled electro-active mononucleotide (eNT). The released eNT, due to its less negative charge and small size, diffuses easily to the negative ITO electrode, resulting in an increased electrochemical signal. Meanwhile, the intact target DNA returns freely to the solution and hybridizes with other probes, releasing multiple eNTs and thereby further amplifies the electrochemical signal. This new immobilization-free, signal-amplified electrochemical DNA detection strategy shows great potential to be integrated in portable and cost-effective DNA sensing devices.
Assuntos
Técnicas Biossensoriais/métodos , DNA/análise , Eletroquímica/métodos , Exodesoxirribonucleases/metabolismo , Sondas de Oligonucleotídeos/química , Sequência de Bases , Técnicas Biossensoriais/instrumentação , DNA/química , DNA/genética , Eletroquímica/instrumentação , Eletrodos , Soluções , Compostos de Estanho/químicaRESUMO
We report a simple staining-free gel electrophoresis method to simultaneously probe protease and nuclease. Utilizing gold nanoparticles (Au-NPs) dual-functionalized with DNA and peptide, the presence and concentration of nuclease and protease are determined concurrently from the relative position and intensity of the bands in the staining-free gel electrophoresis. The use of Au-NPs eliminates the need for staining processes and enables naked eye detection, while a mononucleotide-mediated approach facilitates the synthesis of DNA/peptide conjugated Au-NPs and simplifies the operation procedures. Multiplex detection and quantification of DNase I and trypsin are successfully demonstrated.
Assuntos
DNA/química , Eletroforese/métodos , Ensaios Enzimáticos/métodos , Ouro/química , Nanopartículas Metálicas/química , Peptídeos/química , DNA/metabolismo , Desoxirribonuclease I/análise , Desoxirribonuclease I/metabolismo , Proteínas Imobilizadas/química , Proteínas Imobilizadas/metabolismo , Limite de Detecção , Peptídeos/metabolismo , Tripsina/análise , Tripsina/metabolismoRESUMO
In this paper, we present a new microfluidic immunoassay platform, which is based on the synergistic combination of the yeast surface display (YSD) technique and the microfluidic technology. Utilizing the YSD technique, antigens specific to the target antibody are displayed on the surface of engineered yeast cells with intracellular fluorescent proteins. The displayed antigens are then used for the detection of the target antibody, with the yeast cells as fluorescent labels. Multiplex immunoassay can be readily realized by using yeast cells expressing different intracellular fluorescent proteins to display different antigens. The implementation of this YSD-based immunoassay on the microfluidic platform eliminates the need for the bulky, complex and expensive flow cytometer. To improve the detection sensitivity and to eliminate the need for pumping, a functionalized micro pillar array (MPA) is incorporated in the microfluidic chip, resulting in a detection limit of 5 ng/mL (or 1 ng in terms of amount) and enhanced compatibility with practical applications such as clinical biopsy. This new platform has a high potential to be integrated into microfluidic detection systems to enable portable diagnostics in the future.
RESUMO
Nucleic acid based analysis provides accurate differentiation among closely affiliated species and this species- and sequence-specific detection technique would be particularly useful for point-of-care (POC) testing for prevention and early detection of highly infectious and damaging diseases. Electrochemical (EC) detection and polymerase chain reaction (PCR) are two indispensable steps, in our view, in a nucleic acid based point-of-care testing device as the former, in comparison with the fluorescence counterpart, provides inherent advantages of detection sensitivity, device miniaturization and operation simplicity, and the latter offers an effective way to boost the amount of targets to a detectable quantity. In this mini-review, we will highlight some of the interesting investigations using the combined EC detection and PCR amplification approaches for end-point detection and real-time monitoring. The promise of current approaches and the direction for future investigations will be discussed. It would be our view that the synergistic effect of the combined EC-PCR steps in a portable device provides a promising detection technology platform that will be ready for point-of-care applications in the near future.
Assuntos
Técnicas Eletroquímicas/métodos , Sistemas Automatizados de Assistência Junto ao Leito , Reação em Cadeia da Polimerase/métodos , Sequência de Bases , Primers do DNA/genética , HumanosRESUMO
An electrochemical method for sequence-specific detection of DNA without solid-phase probe immobilization is reported. This detection scheme starts with a solution-phase hybridization of ferrocene-labeled peptide nucleic acid (Fc-PNA) and its complementary DNA (cDNA) sequence, followed by the electrochemical transduction of Fc-PNA-DNA hybrid on indium tin oxide (ITO)-based substrates. On the bare ITO electrode, the negatively charged Fc-PNA-DNA hybrid exhibits a much reduced electrochemical signal than that of the neutral-charge Fc-PNA. This is attributed to the electrostatic repulsion between the negatively charged ITO surface and the negatively charged DNA, hindering the access of Fc-PNA-DNA to the electrode. On the contrary, when the transduction measurement is done on the ITO electrode coated with a positively charged poly(allylamine hydrochloride) (PAH) layer, the electrostatic attraction between the (+) PAH surface and the (-) Fc-PNA-DNA hybrid leads to a much higher electrochemical signal than that of the Fc-PNA. The measured electrochemical signal is proportional to the amount of cDNA present. In terms of detection sensitivity, the PAH-modified ITO platform was found to be more sensitive (with a detection limit of 40 fmol) than the bare ITO counterpart (with a detection limit of 500 fmol). At elevated temperatures, this method was able to distinguish fully matched target DNA from DNA with partial mismatches. Unpurified PCR amplicons were detected using a similar format with a detection limit down to 4.17 amol. This detection method holds great promise for single-base mismatch detection as well as electrochemistry-based detection of post-PCR products.
Assuntos
DNA Complementar/análise , Técnicas Eletroquímicas/métodos , Compostos Ferrosos/química , Ácidos Nucleicos Peptídicos/química , Pareamento Incorreto de Bases , Sequência de Bases , DNA Complementar/genética , Eletrodos , Metalocenos , Poliaminas/química , Reação em Cadeia da Polimerase/métodos , Especificidade por Substrato , Compostos de Estanho/químicaRESUMO
A highly sensitive electrochemical DNA sensor that requires no probe immobilization has been developed based on a target recycling mechanism utilizing a DNA polymerase with a strand displacement activity. The electrochemical detection is realized by taking advantage of the difference in diffusivity between a free ferrocene-labeled peptide nucleic acid (Fc-PNA) and a Fc-PNA hybridized with a complementary DNA, while the DNA polymerase-assisted target recycling leads to signal generation and amplification. The hybridization of the target DNA opens up a stem-loop template DNA with the Fc-PNA hybridized to its extruded 5' end and allows a DNA primer to anneal and be extended by the DNA polymerase, which results in sequential displacement of the target DNA and the Fc-PNA from the template DNA. The displaced target DNA will hybridize with another template DNA, triggering another round of primer extension and strand displacement. The released Fc-PNA, due to its neutral backbone, has much higher diffusivity towards a negatively charged electrode, compared to that when it is hybridized with a negatively charged DNA. Therefore, a significantly enhanced signal of Fc can be observed. The outstanding sensitivity and simplicity make this approach a promising candidate for next-generation electrochemical DNA sensing technologies.
Assuntos
Técnicas Biossensoriais/métodos , DNA/análise , Sequência de Bases , Técnicas Biossensoriais/instrumentação , Técnicas Biossensoriais/estatística & dados numéricos , DNA/química , DNA/genética , Sondas de DNA/química , Técnicas Eletroquímicas , Conformação de Ácido Nucleico , Hibridização de Ácido Nucleico , Ácidos Nucleicos Peptídicos/químicaRESUMO
A novel electrochemical method for multiplex detection of sequence-specific DNA and single nucleotide polymorphism (SNP) that requires no probe immobilization is reported. The immobilization-free detection of target DNA is realized by the use of a neutrally charged peptide nucleic acid (PNA) probe labeled with an electroactive indicator and a negatively charged ITO electrode. Upon hybridization between the target DNA and the complementary PNA probe, electrostatic repulsion between the negative backbone of the DNA/PNA duplex and the negative surface of the ITO electrode prevents the electroactive indicator from approaching the electrode, resulting in a significantly suppressed electrochemical signal. Multiplex DNA or SNP detection is enabled by using multiple PNA probes with different sequences labeled with different distinguishable electroactive indicators. Due to the immobilization-free nature of this detection scheme, no interference is found between the simultaneous detection of multiple target DNAs or SNPs. This simple and robust immobilization-free multiplex DNA and SNP detection strategy may find applications in a wide range of fields especially in point-of-care testing.