RESUMO
The development of excellently stretchable, highly mobile, and sustainable power supplies is of great importance for self-power wearable electronics. Transpiration-driven hydrovoltaic power generator (HPG) has been demonstrated to be a promising energy harvesting strategy with the advantages of negative heat and zero-carbon emissions. Herein, this work demonstrates a fiber-based stretchable HPG with the advantages of high output, portability, knittability, and sustainable power generation. Based on the functionalized micro-nano water diffusion channels constructed by the discarded mask straps (MSs) and oxidation-treated carbon nanomaterials, the applied water can continuously produce electricity during the spontaneous flow and diffusion. Experimentally, when a tiny 0.1 mL of water encounters one end of the proposed HPG, the centimeter-length device can yield a peak voltage of 0.43 V, peak current of 29.5 µA, and energy density of 5.833 mW h cm-3. By efficiently integrating multiple power generation units, sufficient output power can be provided to drive commercial electronic devices even in the stretched state. Furthermore, due to the reversibility of the electrical output during dynamic stretching-releasing, it can passively convert physiological activities and motion behaviors into quantifiable and processable current signals, opening up HPG's application in the field of self-powered wearable sensing.
RESUMO
AIM: To investigate type III collagen (COL III) turnover in participants from the CANVAS Program biomarker substudy. METHODS: Biomarkers of COL III formation (PRO-C3) and COL III degradation fragments (C3M and CTX-III) were assessed in baseline and year 3 plasma from patients enrolled in CANVAS, investigating the effect of canagliflozin in participants with type 2 diabetes. The clinical outcomes investigated in this study were hospitalization for heart failure, cardiovascular death and all-cause mortality. RESULTS: Higher levels of PRO-C3 and C3M at baseline were associated with an increased incidence of all investigated outcomes, whereas levels of CTX-III at baseline were not associated with any of the investigated outcomes. Levels of PRO-C3 decreased and levels of CTX-III increased following canagliflozin treatment. An increase from baseline to year 3 in PRO-C3 in the placebo arm was associated with an increased incidence of cardiovascular outcomes, and in all participants was associated with an increased risk of all-cause mortality. CONCLUSIONS: The changes in PRO-C3 and CTX-III reflect a shift in the dynamics of COL3 turnover following treatment with canagliflozin. These biomarkers are promising pharmacodynamic tools that can be used to monitor the impact of canagliflozin treatment and possibly other sodium-glucose co-transporter-2 inhibitors on tissue remodelling in future interventional trials.
Assuntos
Biomarcadores , Canagliflozina , Colágeno Tipo III , Diabetes Mellitus Tipo 2 , Inibidores do Transportador 2 de Sódio-Glicose , Humanos , Canagliflozina/uso terapêutico , Diabetes Mellitus Tipo 2/tratamento farmacológico , Diabetes Mellitus Tipo 2/metabolismo , Diabetes Mellitus Tipo 2/sangue , Diabetes Mellitus Tipo 2/complicações , Masculino , Feminino , Pessoa de Meia-Idade , Colágeno Tipo III/metabolismo , Colágeno Tipo III/sangue , Biomarcadores/sangue , Inibidores do Transportador 2 de Sódio-Glicose/uso terapêutico , Idoso , Doenças Cardiovasculares/epidemiologia , Doenças Cardiovasculares/prevenção & controle , Resultado do Tratamento , Insuficiência Cardíaca , Angiopatias Diabéticas/prevenção & controle , Angiopatias Diabéticas/epidemiologiaRESUMO
Tactile sensors have been widely used in the areas of health monitoring and intelligent human-machine interface. Flexible tactile sensors based on nanofiber mats made by electrospinning can meet the requirements of comfortability and breathability for wearing the body very well. Here, we developed a flexible and self-powered tactile sensor that was sandwich assembled by electrospun organic electrodes and a piezoelectric layer. The metal-free organic electrodes of thermal plastic polyurethane (PU) nanofibers decorated with multi-walled carbon nanotubes were fabricated by electrospinning followed by ultrasonication treatment. The electrospun polyvinylidene fluoride-trifluoroethylene (PVDF-TrFE) mat was utilized as the piezoelectric layer, and it was found that the piezoelectric performance of PVDF-TrFE nanofiber mat added with barium titanate (BaTiO3) nanoparticles was enhanced about 187% than that of the pure PVDF-TrFE nanofiber mat. For practical application, the as-prepared piezoelectric tactile sensor exhibited an approximative linear relationship between the external force and the electrical output. Then the array of fabricated sensors was attached to the fingertips of a glove to grab a cup of water for tactile sensing, and the mass of water can be directly estimated according to the outputs of the sensor array. Attributed to the integrated merits of good flexibility, enhanced piezoelectric performance, light weight, and efficient gas permeability, the developed tactile sensor could be widely used as wearable devices for robot execution end or prosthesis for tactile feedback.
Assuntos
Nanofibras , Nanotubos de Carbono , Dispositivos Eletrônicos Vestíveis , Humanos , Poliuretanos , ÁguaRESUMO
The objective of the study is to determine the risks and benefits of treating idiopathic short stature (ISS) with aromatase inhibitors (AIs). We comprehensively searched PubMed, Embase, and the China National Knowledge Infrastructure between establishment year and January 31, 2020. Mean difference (MD)/Standardized mean differences (SMD) with 95% confidence intervals (CI) of individual studies were pooled using fixed or random effects models. Subgroup and sensitivity analyses were also performed. Publication bias was estimated using funnel plots and Egger tests. Fourteen studies including 388 participants were included. The meta-analysis results showed that AIs significantly increased final height (MD=2.46, 95% CI: 0.8-4.12) and predicted adult height (MD=0.34, 95% CI: 0.11-0.57). Changes in bone age (MD=-0.1, 95% CI: -0.86-0.66) and bone mineral density (MD=-0.05, 95% CI: -0.19-0.1) were not different between intervention and control group. AI significantly increased testosterone level (SMD=2.01, 95% CI: 0.8-3.23) and reduced estradiol level (SMD=-1.13, 95% CI: -1.87 to -0.40); The intervention and control group had no significant differences in the levels of high-density lipoprotein-cholesterol (SMD=-0.31, 95%CI: -0.68-0.06) and IGF-1 (SMD=0.7, 95% CI: -0.66-2.06) levels. Adverse events were more frequent in the intervention group than in the control group (odds ratio=3.12, 95% CI: 1.44-6.73). In conclusion, both AI monotherapy and AI combination therapy can increase predicted adult height and testosterone levels.
Assuntos
Inibidores da Aromatase/administração & dosagem , Estatura/efeitos dos fármacos , Transtornos do Crescimento/tratamento farmacológico , Testosterona/sangue , Transtornos do Crescimento/sangue , Transtornos do Crescimento/patologia , Humanos , PrognósticoRESUMO
Herein, a novel conductive poly(N-phenylglycine) (PNPG) polymer was successfully prepared, byin situelectrochemical polymerization method (+0.75 VversusAg/AgCl) for 10 min, on flexible stainless-steel plate coated with a thin Au film (Au/SS) to serve as a binder-free pseudocapacitive PNPG/Au/SS electrode for energy storage devices. Compared to the electrode without Au coating, PNPG/Au/SS electrode exhibited better electrochemical performance with larger specific capacitance (495 F g-1at a current density of 2 A g-1), higher rate performance and lower resistance, which are good indications to act as a positive electrode for asymmetric supercapacitor devices. Combined with activated carbon as a negative electrode, an asymmetric supercapacitor device was constructed. It displayed a specific capacitance of 38 F g-1at a current density of 0.5 A g-1and an energy density of 5.3 Wh kg-1at a power density of 250 W kg-1. Experimentally, two asymmetric supercapacitor devices were connected in series to power a home-made windmill continuously for 8 s, revealing the high potential of this novel conductive polymer material for energy storage application.
RESUMO
Electrostatic nanogenerators or capacitive sensors that leverage electrostatic induction for power generation or sensing, has attracted significant interests due to their simple structure, ease of fabrication, and high device stability. However, in order for such devices to work, an additional power source or a post-charging process is necessary to activate the electrostatic effect. In this work, an electrostatic nanogenerator is fabricated using electrospun polystyrene (PS) mats and dip-coated graphene oxide (GO) films as the self-charged components. The electret performances of the PS mats and GO films are characterized via the electrostatic force microscopy phase shift and surface potential measurements. With a multilayer device structure that consists of top electrodes/GO films/spacer/electrospun PS mats/bottom electrodes, the resultant device acts as an electrostatic generator that operates in the noncontact mode. The nanogenerator can output a peak voltage of ca. 6.41 V and a peak current of ca. 6.57 nA at a rate of 1 Hz of mechanical compression, and with no attenuation of electrical outputs even after 50 000 cycles over a 13 h period. Furthermore, this as-prepared device is also capable of serving as a self-powered capacitive sensor for detection of tiny mechanical impacts and measurement of human finger bending. This results of this work provides a new avenue to easily fabricate electrostatic nanogenerators with high durability and self-powered capacitive sensors for the detection of small impacts.
RESUMO
BACKGROUND: Osteoarthritis (OA) is a disease with multiple endotypes. A hallmark of OA is loss of cartilage; however, it is evident that the rate of cartilage loss differs among patients, which may partly be attributed to differential capacity for cartilage repair. We hypothesize that a low cartilage repair endotype exists and that such endotypes are more likely to progress radiographically. The aim of this study is to examine the associations of level of cartilage formation with OA severity and radiographic OA progression. We used the blood-based marker PRO-C2, reflecting type II collagen formation, to assess levels of cartilage formation. MATERIALS AND METHODS: The type II collagen propeptide PRO-C2 was measured in the serum/plasma of knee OA subjects from New York University (NYU, n = 106) and a subcohort of the phase III oral salmon calcitonin (sCT) trial SMC021-2301 (SMC, n = 147). Risk of radiographic medial joint space narrowing (JSN) over 24 months was compared between quartiles (very low, low, moderate, and high) of PRO-C2. Associations were adjusted for age, gender, BMI, race, baseline pain levels, and baseline joint space width. RESULTS: In both the NYU and SMC cohorts, subjects with low PRO-C2 levels had greater JSN compared with subjects with high PRO-C2. Mean difference in JSN between subjects with very low and high levels of PRO-C2 was 0.65 mm (p = 0.002), corresponding to a 3.4 (1.4-8.6)-fold higher risk of progression. There was no significant effect of sCT treatment, compared with placebo, on JSN over 2 years before stratification based on baseline PRO-C2. However, there were proportionately fewer progressors in the sCT arm of the very low/low PRO-C2 group compared with the moderate/high group (Chi squared = 6.5, p = 0.011). CONCLUSION: Serum/plasma level of type II collagen formation, PRO-C2, may be an objective indicator of a low cartilage repair endotype, displaying radiographic progression and superior response to a proanabolic drug. LEVEL OF EVIDENCE: Level III post hoc exploratory analysis of one longitudinal cohort and a sub-study from one phase III clinical trial.
Assuntos
Proteínas de Ligação ao Cálcio/sangue , Cartilagem Articular/diagnóstico por imagem , Condrogênese/fisiologia , Colágeno Tipo II/sangue , Osteoartrite do Joelho/sangue , Osteoartrite do Joelho/diagnóstico por imagem , Idoso , Biomarcadores/sangue , Conservadores da Densidade Óssea/uso terapêutico , Calcitonina/uso terapêutico , Estudos de Coortes , Progressão da Doença , Feminino , Humanos , Masculino , Pessoa de Meia-Idade , Osteoartrite do Joelho/tratamento farmacológico , Valor Preditivo dos Testes , RadiografiaRESUMO
BACKGROUND: The modified polycystic ovary syndrome health-related quality-of-life questionnaire (MPCOSQ) is a 30-item instrument measuring quality-of-life in English-speaking patients with polycystic ovary syndrome (PCOS). We aimed to: 1) cross-culturally adapt the MPCOSQ into Chinese, and 2) assess the validity and reliability of the Chinese version of the MPCOSQ (Chi-MPCOSQ). METHODS: The MPCOSQ was translated using the forward-backward method, and its validity and reliability were assessed among 283 Chinese patients with PCOS. Internal consistency reliability and test-retest reliability were assessed by Cronbach's α and intra-correlation coefficient (ICC), respectively. Construct validity was tested through exploratory factor analysis and confirmatory factor analysis. Discriminant validity was assessed by Mann-Whitney U test to compare the scores on the Chi-MPCOSQ between 283 women with PCOS and 93 women without PCOS. RESULTS: Exploratory factor analysis generated a 7-factor structure of the 30-item version of the Chi-MPCOSQ, which accounted for 77% of the overall variance. The Chi-MPCOSQ had high internal consistency (Cronbach's α = 0.88) and good test-retest reliability (ICC = 0.89). Compared to PCOS patients, women without PCOS had consistently lower scores for every dimension of the Chi-MPCOSQ, demonstrating its good discriminant validity. CONCLUSION: The Chi-MPCOSQ is a valid and reliable instrument for measuring quality-of-life among Chinese women with PCOS.
Assuntos
Síndrome do Ovário Policístico/psicologia , Qualidade de Vida , Inquéritos e Questionários/normas , Adulto , Estudos de Casos e Controles , China , Feminino , Humanos , Masculino , Psicometria/instrumentação , Reprodutibilidade dos Testes , Adulto JovemRESUMO
N-terminal propeptide of type II collagen (PIINP) is a biomarker reflecting cartilage formation. PIINP exists in two main splice variants termed as type IIA and type IIB collagen NH2-propeptide (PIIANP, PIIBNP). PIIANP has been widely recognized as a cartilage formation biomarker. However, the utility of PIIBNP as a marker in preclinical and clinical settings has not been fully investigated yet. In this study, we aimed to characterize an antibody targeting human PIIBNP and to develop an immunoassay assessing type II collagen synthesis in human blood samples. A high sensitivity electrochemiluminescence immunoassay, hsPRO-C2, was developed using a well-characterized antibody against human PIIBNP. Human cartilage explants from replaced osteoarthritis knees were cultured for ten weeks in the presence of growth factors, insulin-like growth factor 1 (IGF-1) or recombinant human fibroblast growth factor 18 (rhFGF-18). The culture medium was changed every seven days, and levels of PIIBNP, PIIANP, and matrix metalloproteinase 9-mediated degradation of type II collagen (C2M) were analyzed herein. Serum samples from a cross-sectional knee osteoarthritis cohort, as well as pediatric and rheumatoid arthritis samples, were assayed for PIIBNP and PIIANP. Western blot showed that the antibody recognized PIIBNP either as a free fragment or attached to the main molecule. Immunohistochemistry demonstrated that PIIBNP was predominately located in the extracellular matrix of the superficial and deep zones and chondrocytes in both normal and osteoarthritic articular cartilage. In addition, the hsPRO-C2 immunoassay exhibits acceptable technical performances. In the human cartilage explants model, levels of PIIBNP, but not PIIANP and C2M, were increased (2 to 7-fold) time-dependently in response to IGF-1. Moreover, there was no significant correlation between PIIBNP and PIIANP levels when measured in knee osteoarthritis, rheumatoid arthritis, and pediatric serum samples. Serum PIIBNP was significantly higher in controls (KL0/1) compared to OA groups (KL2/3/4, p = 0.012). The hsPRO-C2 assay shows completely different biological and clinical patterns than PIIANP ELISA, suggesting that it may be a promising biomarker of cartilage formation.
Assuntos
Colágeno Tipo II/sangue , Cartilagem Hialina/metabolismo , Imunoensaio/métodos , Anticorpos Monoclonais , Biomarcadores , Cartilagem Articular/metabolismo , Colágeno Tipo II/química , Colágeno Tipo II/imunologia , Ensaio de Imunoadsorção Enzimática , Feminino , Humanos , Imuno-Histoquímica , Medições Luminescentes/métodos , Fragmentos de Peptídeos/imunologiaRESUMO
PURPOSE: This study aimed to detect white matter changes and different effects of thyroid hormone on the white matter integrity in young adult male patients with childhood-onset growth hormone deficiency (CO-GHD), compared with healthy people. METHODS: Magnetic resonance imaging (structural imaging and diffusion tensor imaging) was performed in 17 young adult male patients with CO-GHD and 17 healthy male controls. The white matter volume, mean diffusivity (MD) values and fractional anisotropy (FA) values were quantified and compared between two groups (CO-GHD group vs. control group). We assessed the interaction effects between thyroid hormone and groups (CO-GHD group vs. control group) on white matter integrity. RESULTS: Patients with CO-GHD exhibited similar white matter volumes compared with controls. However, compared with the controls, patients with CO-GHD showed a significant reduction in FA values in six clusters and a substantial increase in MD values in four clusters, mainly involving the corticospinal tracts, corpus callosum and so on. Moreover, after correcting for insulin-like growth factor-1 levels, the significant interaction effects between groups (CO-GHD group vs. control group) and serum free thyroxine levels on MD values were noted in three clusters, mainly involving in superior longitudinal fasciculus and sagittal stratum. CONCLUSION: In conclusion, young males with CO-GHD showed white matter changes in multiple brain regions and different effects of thyroid hormone on the white matter integrity.
Assuntos
Imagem de Tensor de Difusão , Substância Branca , Criança , Humanos , Masculino , Adulto Jovem , Encéfalo/diagnóstico por imagem , Imagem de Tensor de Difusão/métodos , Hormônio do Crescimento , Hormônios Tireóideos , Substância Branca/diagnóstico por imagem , Substância Branca/patologia , Hormônio do Crescimento HumanoRESUMO
BACKGROUND: Peucedanum praeruptorum Dunn (PPD) is a Chinese herbal medicine with medicinal value. Clinical studies have shown that PPD has protective effects against wind-heat, cough, asthma, cardiovascular diseases, and cancer. Therefore, cultivation of PPD is becoming more common. However, it has been difficult to determine the optimal harvest period for botanical Chinese medicines such as PPD. OBJECTIVES: Odor characteristics are directly related to the chemical components contained in traditional Chinese medicines. In particular, for traditional Chinese medicines such as PPD that are rich in volatile components, higher quality usually means more beneficial volatile components. The purpose of this study was to analyze changes in PPD volatile components across different harvest periods, and provide the basis for the identification of the ideal harvest period to ensure PPD quality. METHODS: We measured the volatile components of PPD at different harvest periods using HS-GC-IMS to characterize its volatile component fingerprint at different harvest periods. RESULTS: We identified 80 volatile components in PPD across five harvest periods, and combined complex heatmap and PCA methods distinguish the characteristics of the different harvest periods, and used ion mobility spectrometry to determine the volatile organic compounds (VOCs), which mainly included compounds such as olefins, esters, alcohols, aldehydes, and ketones, and determined that the abundance of volatile components reached a peak in December. CONCLUSIONS: The fingerprint determination of characteristic volatile components based on HS-GC-IMS can distinguish PPD in different harvest periods. HIGHLIGHTS: We used HS-GC-IMS to determine the characteristic fingerprint of volatile components from PPD across different harvest periods. This approach differs from past studies, which have determined the optimal harvest time of medicinal materials based on only the content of a single active ingredient.
Assuntos
Álcoois , Compostos Orgânicos Voláteis , Cromatografia Gasosa-Espectrometria de Massas/métodos , Aldeídos/análise , Compostos Orgânicos Voláteis/análise , Espectrometria de Mobilidade Iônica/métodosRESUMO
Immunoassays, which have gained popularity in clinical practice and modern biomedical research, play an increasingly important role in quantifying various analytes in biological samples. Despite their high sensitivity and specificity, as well as their ability to analyze multiple samples in a single run, immunoassays are plagued by the problem of lot-to-lot variance (LTLV). LTLV negatively affects assay accuracy, precision, and specificity, leading to considerable uncertainty in reported results. Therefore, maintaining consistency in technical performance over time presents a challenge in reproducing immunoassays. In this article, we share our two-decade-long experience and delve into the reasons for and locations of LTLV, as well as explore methods to mitigate its effects. Our investigation identifies potential contributing factors, including quality fluctuation in critical raw materials and deviations in manufacturing processes. These findings offer valuable insights to developers and researchers working with immunoassays, emphasizing the importance of considering lot-to-lot variance in assay development and application.
RESUMO
Platelet-derived growth factor D (PDGFD) is a member of the PDGF gene family, and it plays an important role in the regulation of adipocyte development in mammals. Furthermore, genome-wide association studies (GWAS) have previously identified it as a candidate gene associated with fleece fiber variation, body size, and the fat-tail phenotype in domestic Chinese sheep. In this study, a total of 1919 indigenous Chinese sheep were genotyped to examine the association between nucleotide sequence variations in PDGFD and body morphology. Our results detected both a 14 bp insertion in intron 2 and a 13 bp deletion in intron 4 of PDGFD. Moreover, these two InDel loci had low to moderate polymorphism. Notably, the 13 bp deletion mutation of PDGFD was found to significantly affect sheep body size. Yearling rams in the Luxi black-headed sheep (LXBH) containing a heterozygous genotype (insertion/deletion, ID) were found to have larger body length, chest depth, and body weight than those with wild genotypes. Furthermore, adult ewes in the Guiqian semi-fine wool sheep (GSFW) containing a homozygous mutation (deletion/deletion, DD) were found to have smaller chest width than their peers. Moreover, yearling ewes in this group with the same homozygous mutation were found to have lower body weight, chest width, and cannon circumference compared to those of other individuals. This study demonstrates that PDGFD InDel polymorphisms have the potential to be effective molecular markers to improve morphological traits in domestic Chinese sheep.
RESUMO
Background: The hippocampal abundant transcript 1 (HIAT1) gene, also known as major facilitator superfamily domain-containing 14A (MFSD14A), encodes for a transmembrane transporter protein and has been previously shown to be associated with milk production in buffalo and sheep breeds, as well as growth traits in chicken and goats. However, tissue level distribution of the ovine HIAT1 gene, as well as its effect on body morphometric traits in sheep, has yet to be studied. Methods: The HIAT1 mRNA expression profile of Lanzhou fat-tailed (LFT) sheep was determined by quantitative real-time PCR (qPCR). A total of 1498 sheep of three indigenous Chinese sheep breeds were PCR-genotyped for polymorphisms of HIAT1 gene. Student's t-test was used to observe the association between the genotype and sheep morphometric traits. Results: HIAT1 was widely expressed in all examined tissues, and was particularly abundant in the testis of male LFT sheep. Additionally, a 9-bp insertion mutation (rs1089950828) located within the 5'-upstream region of HIAT1 was investigated in Luxi black-headed (LXBH) sheep and Guiqian semi-fine wool (GSFW) sheep. The wildtype allele frequency 'D' was found to be more prevalent than that of the mutant allele 'I'. Furthermore, low genetic diversity was confirmed in all sampled sheep populations. Subsequent association analyses indicated an association between the 9-bp InDel mutation of interest and the morphometric traits of LXBH and GSFW sheep. Furthermore, yearling ewes with a heterozygous genotype (ID) demonstrated smaller body sizes, while yearling rams and adult ewes with the heterozygous genotype were found to have overall better growth performance. Conclusion: These findings imply that functional InDel polymorphism (rs1089950828) has the potential to be utilized for marker-assisted selection (MAS) of growth traits in domestic Chinese sheep populations.
RESUMO
Copy number variations (CNV) contribute significantly to genetic variations. Numerous studies have shown that CNV affects phenotypic traits in livestock. The SMAD family member 2 (SMAD2) is a leading candidate gene in reproduction and has a crucial effect on litter size. Additionally, SMAD2 is also required for male reproduction and influences male germ cell development. However, there are no reports on investigating the effect of CNVs in the SMAD2 gene on reproductive traits in goat. Therefore, the goal of this study was to explore associations between CNV of the SMAD2 gene and litter size and semen quality in Shaanbei white cashmere (SBWC) goats. In this study, two CNVs within the SMAD2 were identified in 352 SBWC goats (50 males and 302 females). The association analysis revealed that only CNV2 was significantly associated with female goat first-born litter size (P = 3.59 × 10-4), male semen concentration (P < 0.01), ejaculation volume, live sperm count, and sperm deformity rate (P < 0.05). In terms of phenotypic performance, the individuals with loss genotypes outperformed those with other genotypes. CNV1 and CNV2 genotype combinations containing their dominant genotypes were also associated with goat litter size (P = 1.7 × 10-5), but no differences in semen quality were found. In summary, CNV2 of the SMAD2 gene is useful for molecular marker-assisted selection breeding, as it is associated with essential goat reproductive traits.
Assuntos
Variações do Número de Cópias de DNA , Análise do Sêmen , Gravidez , Masculino , Feminino , Animais , Tamanho da Ninhada de Vivíparos/genética , Análise do Sêmen/veterinária , Cabras/genética , SêmenRESUMO
Flexible electronics have demonstrated various strategies to enhance the sensory ability for tactile perception and wearable physiological monitoring. Fibrous microstructures have attracted much interest because of their excellent mechanical properties and fabricability. Herein, a structurally robust fibrous mat was first fabricated by electrospinning, followed by a sequential process of functionalization utilizing ultrasonication treatment and in situ polymerization growth. Electrospun polyurethane (PU) microfibers were anchored with multi-walled carbon nanotubes (MWCNTs) to form conductive paths along each fiber by a scalable ultrasonic cavitation treatment in an MWCNT suspension. After, a layer of poly(3,4-ethylene dioxythiophene) (PEDOT) was grown on the surface of PU fibers decorated with MWCNTs to enhance the conductive conjunctions of MWCNTs. Due to the superior electromechanical behaviors and mechanical reinforcement of PEDOT, the PEDOT/MWCNT@PU mat-based device exhibits a wide working range (0-70 kPa), high sensitivity (1.6 kPa-1), and good mechanical robustness (over 18,000 cycles). The PEDOT/MWCNT@PU mat-based sensor also demonstrates a good linear response to different temperature variations because of the thermoelectricity of the PEDOT/MWCNT composite. This novel strategy for the fabrication of multifunctional fibrous mats provides a promising opportunity for future applications for high-performance wearable devices.
RESUMO
Background: The problem of achieving economic efficiency in sheep breeding can be largely solved by increasing sheep productivity. Recently, the BMPRIB gene has been revealed by GWAS as a potential candidate gene for sheep body morphometric traits. Therefore, the present study aimed to investigate whether genetic polymorphisms (p.Q249R SNP and 90-bp deletion) in the BMPRIB gene are associated with sheep growth traits. Methods: PCR-based genotyping was performed on 1,875 sheep, including 1,191 Guiqian semi-fine wool (GQSFW), 560 Luxi Blackhead (LXBH), 55 Lanzhou fat-tailed (LZFT), and 69 Weining (WN) sheep. Genotype-phenotype association was assessed using the independent samples t-test and ANOVA. The significance level was set at αoriginal < 0.05. The threshold p-value for significance was adjusted after correction for multiple comparisons using the Bonferroni correction. Results: After the Bonferroni correction, it was found that individuals with FecB+/FecB+ genotypes of the p.Q249R had significantly better growth traits in LXBH ewe lambs, including the body length, chest width, paunch girth, cannon circumference, and hip width (P<0.0005). Meanwhile, associations were observed between 90-bp deletion polymorphism and several growth traits (body length, body height, chest depth, and canon circumference) in GQSFW ewe adults after the Bonferroni correction (P < 0.0002), and individuals with the "DD" genotypes had greater growth traits. Conclusion: Our findings align with the experimental observations from GWAS, which identified the BMPRIB gene as a potential candidate gene for body measurement traits. These findings not only confirm the previous study's results but also expand on them. Therefore, further investigations regarding the impact of BMPRIB polymorphisms on growth traits are necessary in other sheep breeds.
RESUMO
Exposure to radiation has been associated with increased risk of delivering small-for-gestational-age (SGA) newborns. There are no tools to predict SGA newborns in pregnant women exposed to radiation before pregnancy. Here, we aimed to develop an array of machine learning (ML) models to predict SGA newborns in women exposed to radiation before pregnancy. Patients' data was obtained from the National Free Preconception Health Examination Project from 2010 to 2012. The data were randomly divided into a training dataset (n = 364) and a testing dataset (n = 91). Eight various ML models were compared for solving the binary classification of SGA prediction, followed by a post hoc explainability based on the SHAP model to identify and interpret the most important features that contribute to the prediction outcome. A total of 455 newborns were included, with the occurrence of 60 SGA births (13.2%). Overall, the model obtained by extreme gradient boosting (XGBoost) achieved the highest area under the receiver-operating-characteristic curve (AUC) in the testing set (0.844, 95% confidence interval (CI): 0.713-0.974). All models showed satisfied AUCs, except for the logistic regression model (AUC: 0.561, 95% CI: 0.355-0.768). After feature selection by recursive feature elimination (RFE), 15 features were included in the final prediction model using the XGBoost algorithm, with an AUC of 0.821 (95% CI: 0.650-0.993). ML algorithms can generate robust models to predict SGA newborns in pregnant women exposed to radiation before pregnancy, which may thus be used as a prediction tool for SGA newborns in high-risk pregnant women.
RESUMO
Herein, hybrid micro-supercapacitors (MSCs), consisting of positive CoNi layer double hydroxides (LDHs) decorated on carbon nanotubes (CoNi LDHs@CNTs) and negative CNT electrodes, were assembled by facile drop-coated and electrodeposition methods. The as-fabricated MSCs were optimized in view of electrochemical performance, and the CoNi LDHs-2@CNTs//CNT MSC exhibited a favorable performance and was thus chosen to be the candidate for MSC device package. The packaged CoNi LDHs-2@CNTs//CNT MSC demonstrated a large areal capacitance of 11.0 mF·cm-2 at a current density of 0.08 mA·cm-2, a good rate performance (56% areal capacitance retained at a higher current density of 0.4 mA·cm-2), and a favorable cycling stability and reversibility (92% of the original areal capacitance was retained after 5000 cycles). Furthermore, the MSC device recorded an energy density of 1.5 µWh·cm-2 at a power density of 42.5 µW·cm-2 and was successfully applied for the storage of energy supplied by solar cells to operate a red light-emitting diode. All these findings demonstrated the promising practical energy storage application of the as-fabricated hybrid MSC devices in the construction of sunlight-powered energy storage systems.
RESUMO
Platelet-derived growth factor (PDGF) family, exert plays a key role in embryonic development, cell proliferation, cell migration, angiogenesis and reproduction. Related studies about GWAS analyses have found that PDGFD significantly affected deposition of tail fat in sheep, but there are no studies on reproduction in animals. In this study, three breed of sheep were used to find insertion/deletion (indel) fragment polymorphism of PDGFD which including Australian white (AUW) sheep (Meat type, n = 932), Guiqian semi-fine wool (GSFW) sheep (wool type, n = 60) and East Friensian milk (EFM) sheep (dairy type, n = 60). Only a 18-bp variation was polymorphic in the study AUW sheep population and the genotypes of different sheep breed are also specific. Moreover, the association analysis indicated that this variant was associated with litter size of AUW sheep in the first parity (p < 0.05). The litter size of II genotype was significantly lower than other genotypes in the first parity (p < 0.05). We also revealed that the PDGFD gene was relatively conservative in eight species, PDGFD mRNA expression in 832 sheep samples implying this gene was related to reproduction traits. Hence, these finding demonstrated the one-cause multipotency of PDGFD gene. Collectively, these results suggest that this indel can be used as an effective marker for sheep breeding.