RESUMO
A facile two-step hydrothermal approach with post-sulfurization treatment was put forward to construct the mixed transition metal sulfide (NiCoZnS) with a high electrochemical performance. The different morphologies of NiCoZnS materials were successfully fabricated by adjusted the Ni/Co molar ratio of the NiCoZn(OH)F precursor. Moreover, thein situphase transformation from the NiCoZn(OH)F phase to Zn0.76Co0.24S and NiCo2S4phases and lattice defects via the S2-ion-exchange were determined by x-ray diffractometer, transmission electron microscopy and x-ray photoelectron spectroscopy techniques, which improved electric conductivity and interfacial active sites of the NiCoZnS, and so promoted the reaction kinetics. Significantly, the urchin-like NiCoZnS1/1prepared at the Ni/Co molar ratio of 1.0 exhibited promising electrochemical performances with high capacitance and excellent cycling stability. Furthermore, the asymmetric device (NiCoZnS//AC) using NiCoZnS1/1as the positive electrode had excellent supercapacitor performances with an energy density of 57.8 Wh·kg-1at a power density of 750 W·kg-1as well as a long cycle life (79.2% capacity retention after 10 000 cycles), indicating the potential application in high-performance supercapacitors.
RESUMO
The ternary NiCoAl hydrotalcite (NiCoAl-LDH) was combined with carboxylic multi-walled carbon nanotube (MWCNT) to fabricate a novel electrochemical sensor for simultaneously determining the co-existing trace phenolic substances. The morphology, structure, and electrochemical behavior of the as-prepared materials were characterized by various techniques. Benefitting from the great conductivity of MWCNT and high electrocatalytic activity of NiCoAl-LDH for phenolic substances, the advanced MWCNT/NiCoAl-LDH sensor presented a fast response, high sensitivity, excellent stability, and satisfactory replicability. The sensor offered good linear responses in the ranges1.50~600 µM to hydroquinone (HQ), 5.00~1.03 × 103 µM to catechol (CC), and 6.00 × 10-2~250 µM to bisphenol A (BPA). The detection limits of HQ, CC, and BPA were 0.4, 0.8, and 6. × 10-3 µM (S/N = 3), respectively. In environmental water, the sensor achieved satisfactory recoveries for the simultaneous detection of HQ (98.6~101%), CC (98.0~101%), and BPA (97.5~101%), with relative standard deviations less than 4.4%.
RESUMO
The rational design of the morphological structure of electrode materials is considered as an important strategy to obtain high-performance supercapacitors. So, NiCoZnS materials with different Ni/Co/Zn molar ratios on Ni foam (NF) were synthesized, in which the Ni/Co/Zn molar ratio plays a key role in the morphological structure and electrochemical performances. Furthermore, the pre-prepared NiCoZnS materials act as substrates to guide the self-assembling of NiCoFe layered double hydroxide (LDH) nanosheets on the substrate surface to form core-shell electrode materials (NiCoZnS@NiCoFe-LDH) with a 3D mesoporous hierarchical network structure for further improving electrochemical performances. The unique interconnected coral-like NiCoZnS1@NiCoFe-LDH with a large specific surface area (93.1 m2 g-1) and high specific capacitance is achieved at the Ni/Co/Zn molar ratio of 1 : 1 : 1. Benefiting from the unique structural feature and respective merits of the NiCoZnS and NiCoFe-LDH, the NiCoZnS1@NiCoFe-LDH demonstrates an ultrahigh specific capacitance of 1524.0 C g-1 (3386.7 F g-1) at 1.0 A g-1 and excellent 95.0% capacitance retention at 10 A g-1 after 5000 cycles. As for practical application, the assembled NiCoZnS1@NiCoFe-LDH//AC delivers a favorable energy density of 66.25 W h kg-1 at 1500 W kg-1 and a long-term cycling lifetime (86.04% retention at 5.0 A g-1 after 10 000 cycles), which suggests promising potential in energy storage and conversion.