Nonnative SOD1 trimer is toxic to motor neurons in a model of amyotrophic lateral sclerosis.

Since the linking of mutations in the Cu,Zn superoxide dismutase gene (sod1) to amyotrophic lateral sclerosis (ALS) in 1993, researchers have sought the connection between SOD1 and motor neuron death. Disease-linked mutations tend to destabilize the native dimeric structure of SOD1, and plaques containing misfolded and aggregated SOD1 have been found in the motor neurons of patients with ALS. Despite advances in understanding of ALS disease progression and SOD1 folding and stability, cytotoxic species and mechanisms remain unknown, greatly impeding the search for and design of therapeutic interventions. Here, we definitively link cytotoxicity associated with SOD1 aggregation in ALS to a nonnative trimeric SOD1 species. We develop methodology for the incorporation of low-resolution experimental data into simulations toward the structural modeling of metastable, multidomain aggregation intermediates. We apply this methodology to derive the structure of a SOD1 trimer, which we validate in vitro and in hybridized motor neurons. We show that SOD1 mutants designed to promote trimerization increase cell death. Further, we demonstrate that the cytotoxicity of the designed mutants correlates with trimer stability, providing a direct link between the presence of misfolded oligomers and neuron death. Identification of cytotoxic species is the first and critical step in elucidating the molecular etiology of ALS, and the ability to manipulate formation of these species will provide an avenue for the development of future therapeutic strategies.

High-speed atomic force microscopy reveals structural dynamics of α-synuclein monomers and dimers.

α-Synuclein (α-syn) is the major component of the intraneuronal inclusions called Lewy bodies, which are the pathological hallmark of Parkinson's disease. α-Syn is capable of self-assembly into many different species, such as soluble oligomers and fibrils. Even though attempts to resolve the structures of the protein have been made, detailed understanding about the structures and their relationship with the different aggregation steps is lacking, which is of interest to provide insights into the pathogenic mechanism of Parkinson's disease. Here we report the structural flexibility of α-syn monomers and dimers in an aqueous solution environment as probed by single-molecule time-lapse high-speed AFM. In addition, we present the molecular basis for the structural transitions using discrete molecular dynamics (DMD) simulations. α-Syn monomers assume a globular conformation, which is capable of forming tail-like protrusions over dozens of seconds. Importantly, a globular monomer can adopt fully extended conformations. Dimers, on the other hand, are less dynamic and show a dumbbell conformation that experiences morphological changes over time. DMD simulations revealed that the α-syn monomer consists of several tightly packed small helices. The tail-like protrusions are also helical with a small ß-sheet, acting as a "hinge". Monomers within dimers have a large interfacial interaction area and are stabilized by interactions in the non-amyloid central (NAC) regions. Furthermore, the dimer NAC-region of each α-syn monomer forms a ß-rich segment. Moreover, NAC-regions are located in the hydrophobic core of the dimer.

Effect of acidic pH on the stability of α-synuclein dimers.

Environmental factors, such as acidic pH, facilitate the assembly of α-synuclein (α-Syn) in aggregates, but the impact of pH on the very first step of α-Syn aggregation remains elusive. Recently, we developed a single-molecule approach that enabled us to measure directly the stability of α-Syn dimers. Unlabeled α-Syn monomers were immobilized on a substrate, and fluorophore-labeled monomers were added to the solution to allow them to form dimers with immobilized α-Syn monomers. The dimer lifetimes were measured directly from the fluorescence bursts on the time trajectories. Herein, we applied the single-molecule tethered approach for probing of intermolecular interaction to characterize the effect of acidic pH on the lifetimes of α-Syn dimers. The experiments were performed at pH 5 and 7 for wild-type α-Syn and for two mutants containing familial type mutations E46K and A53T. We demonstrate that a decrease of pH resulted in more than threefold increase in the α-Syn dimers lifetimes with some variability between the α-Syn species. We hypothesize that the stabilization effect is explained by neutralization of residues 96-140 of α-Syn and this electrostatic effect facilitates the association of the two monomers. Given that dimerization is the first step of α-Syn aggregation, we posit that the electrostatic effect thereby contributes to accelerating α-Syn aggregation at acidic pH. © 2016 Wiley Periodicals, Inc. Biopolymers 105: 715-724, 2016.

Direct Detection of α-Synuclein Dimerization Dynamics: Single-Molecule Fluorescence Analysis.

The aggregation of α-synuclein (α-Syn) is linked to Parkinson's disease. The mechanism of early aggregation steps and the effect of pathogenic single-point mutations remain elusive. We report here a single-molecule fluorescence study of α-Syn dimerization and the effect of mutations. Specific interactions between tethered fluorophore-free α-Syn monomers on a substrate and fluorophore-labeled monomers diffusing freely in solution were observed using total internal reflection fluorescence microscopy. The results showed that wild-type (WT) α-Syn dimers adopt two types of dimers. The lifetimes of type 1 and type 2 dimers were determined to be 197 ± 3 ms and 3334 ± 145 ms, respectively. All three of the mutations used, A30P, E46K, and A53T, increased the lifetime of type 1 dimer and enhanced the relative population of type 2 dimer, with type 1 dimer constituting the major fraction. The kinetic stability of type 1 dimers (expressed in terms of lifetime) followed the order A30P (693 ± 14 ms) > E46K (292 ± 5 ms) > A53T (226 ± 6 ms) > WT (197 ± 3 ms). Type 2 dimers, which are more stable, had lifetimes in the range of several seconds. The strongest effect, observed for the A30P mutant, resulted in a lifetime 3.5 times higher than observed for the WT type 1 dimer. This mutation also doubled the relative fraction of type 2 dimer. These data show that single-point mutations promote dimerization, and they suggest that the structural heterogeneity of α-Syn dimers could lead to different aggregation pathways.

Novel polymer linkers for single molecule AFM force spectroscopy.

Flexible polymer linkers play an important role in various imaging and probing techniques that require surface immobilization, including atomic force microscopy (AFM). In AFM force spectroscopy, polymer linkers are necessary for the covalent attachment of molecules of interest to the AFM tip and the surface. The polymer linkers tether the molecules and provide their proper orientation in probing experiments. Additionally, the linkers separate specific interactions from nonspecific short-range adhesion and serve as a reference point for the quantitative analysis of single molecule probing events. In this report, we present our results on the synthesis and testing of a novel polymer linker and the identification of a number of potential applications for its use in AFM force spectroscopy experiments. The synthesis of the linker is based on the well-developed phosphoramidate (PA) chemistry that allows the routine synthesis of linkers with predetermined lengths and PA composition. These linkers are homogeneous in length and can be terminated with various functional groups. PA linkers with different functional groups were synthesized and tested in experimental systems utilizing different immobilization chemistries. We probed interactions between complementary DNA oligonucleotides; DNA and protein complexes formed by the site-specific binding protein SfiI; and interactions between amyloid peptide (Aß42). The results of the AFM force spectroscopy experiments validated the feasibility of the proposed approach for the linker design and synthesis. Furthermore, the properties of the tether (length, functional groups) can be adjusted to meet the specific requirements for different force spectroscopy experiments and system characteristics, suggesting that it could be used for a large number of various applications.

Imaging and determining friction forces of specific interactions between human IgG and rat anti-human IgG.

Covalently immobilized rat anti-human immunoglobulin (IgG) monolayers on thiol-modified gold substrates and human IgG linked with the tips were fabricated using the self-assembled monolayer method, and interactions between these systems were studied by friction force microscopy (FFM). In addition to observation of distinct nanostructures of protein monolayers due to recognition events, FFM also quantified the friction force due to protein-protein-specific interactions. The average friction force due to interactions between the antigen functionalized tip and the antibody monolayer was determined as 200-250 pN, significantly greater than that between either the bare tip and the antibody monolayer (0-50 pN), or the blocked antigen tip and the antibody monolayer (50-100 pN), indicative of antigen/antibody-specific interactions. These results, taken together, suggest that FFM is not only capable of tracking recognition events, but also quantifying the friction force due to specific interactions between biological molecules, such as antigen and antibody.

Two C-terminal sequence variations determine differential neurotoxicity between human and mouse α-synuclein.

BACKGROUND: α-Synuclein (aSyn) aggregation is thought to play a central role in neurodegenerative disorders termed synucleinopathies, including Parkinson's disease (PD). Mouse aSyn contains a threonine residue at position 53 that mimics the human familial PD substitution A53T, yet in contrast to A53T patients, mice show no evidence of aSyn neuropathology even after aging. Here, we studied the neurotoxicity of human A53T, mouse aSyn, and various human-mouse chimeras in cellular and in vivo models, as well as their biochemical properties relevant to aSyn pathobiology. METHODS: Primary midbrain cultures transduced with aSyn-encoding adenoviruses were analyzed immunocytochemically to determine relative dopaminergic neuron viability. Brain sections prepared from rats injected intranigrally with aSyn-encoding adeno-associated viruses were analyzed immunohistochemically to determine nigral dopaminergic neuron viability and striatal dopaminergic terminal density. Recombinant aSyn variants were characterized in terms of fibrillization rates by measuring thioflavin T fluorescence, fibril morphologies via electron microscopy and atomic force microscopy, and protein-lipid interactions by monitoring membrane-induced aSyn aggregation and aSyn-mediated vesicle disruption. Statistical tests consisted of ANOVA followed by Tukey's multiple comparisons post hoc test and the Kruskal-Wallis test followed by a Dunn's multiple comparisons test or a two-tailed Mann-Whitney test. RESULTS: Mouse aSyn was less neurotoxic than human aSyn A53T in cell culture and in rat midbrain, and data obtained for the chimeric variants indicated that the human-to-mouse substitutions D121G and N122S were at least partially responsible for this decrease in neurotoxicity. Human aSyn A53T and a chimeric variant with the human residues D and N at positions 121 and 122 (respectively) showed a greater propensity to undergo membrane-induced aggregation and to elicit vesicle disruption. Differences in neurotoxicity among the human, mouse, and chimeric aSyn variants correlated weakly with differences in fibrillization rate or fibril morphology. CONCLUSIONS: Mouse aSyn is less neurotoxic than the human A53T variant as a result of inhibitory effects of two C-terminal amino acid substitutions on membrane-induced aSyn aggregation and aSyn-mediated vesicle permeabilization. Our findings highlight the importance of membrane-induced self-assembly in aSyn neurotoxicity and suggest that inhibiting this process by targeting the C-terminal domain could slow neurodegeneration in PD and other synucleinopathy disorders.

Spontaneous self-assembly of amyloid ß (1-40) into dimers.

The self-assembly and fibrillation of amyloid ß (Aß) proteins is the neuropathological hallmark of Alzheimer's disease. However, the molecular mechanism of how disordered monomers assemble into aggregates remains largely unknown. In this work, we characterize the assembly of Aß (1-40) monomers into dimers using long-time molecular dynamics simulations. Upon interaction, the monomers undergo conformational transitions, accompanied by change of the structure, leading to the formation of a stable dimer. The dimers are stabilized by interactions in the N-terminal region (residues 5-12), in the central hydrophobic region (residues 16-23), and in the C-terminal region (residues 30-40); with inter-peptide interactions focused around the N- and C-termini. The dimers do not contain long ß-strands that are usually found in fibrils.

Assembly of α-synuclein aggregates on phospholipid bilayers.

The spontaneous self-assembly of α-synuclein (α-syn) into aggregates of different morphologies is associated with the development of Parkinson's disease. However, the mechanism behind the spontaneous assembly remains elusive. The current study shows a novel effect of phospholipid bilayers on the assembly of the α-syn aggregates. Using time-lapse atomic force microscopy, it was discovered that α-syn assembles into aggregates on bilayer surfaces, even at the nanomolar concentration range. The efficiency of the aggregation process depends on the membrane composition, with the greatest efficiency observed for of 1-palmitoyl-2-oleoyl-sn-glycero-3-phospho-l-serine (POPS). Importantly, assembled aggregates can dissociate from the surface, suggesting that on-surface aggregation is a mechanism by which pathological aggregates may be produced. Computational modeling revealed that dimers of α-syn assembled rapidly, through the membrane-bound monomer on POPS bilayer, due to an aggregation-prone orientation of α-syn. Interaction of α-syn with 1-palmitoyl-2-oleoyl-sn-glycero-3-phosphocholine (POPC) leads to a binding mode that does not induce a fast assembly of the dimer. Based on these findings, we propose a model in which the interaction of α-syn with membranes plays a critical role initiating the formation of α-syn aggregates and the overall aggregation process.

Supported Lipid Bilayers for Atomic Force Microscopy Studies.

Nanoimaging methods, atomic force microscopy (AFM) in particular, are widely used to study the interaction of biological molecules with the supported lipid bilayer (SLB), which itself is a traditional model for cellular membranes. Success in these studies is based on the availability of a stable SLB for the required observation period, which can extend several hours. The application of AFM requires that the SLB have a smooth morphology, thus enabling visualization of proteins and other molecules on its surface. Herein, we describe protocols for SLB assembly by using 1-palmitoyl-2-oleoyl-sn-glycero-3-phosphocholine (POPC) and 1-palmitoyl-2-oleoyl-sn-glycero-3-phospho-L-serine (POPS) on a mica support. Our methodology enables us to assemble defect-free POPC and POPS SLBs that remain stable for at least 8 h. The application of such smooth and stable surfaces is illustrated by monitoring of the on-surface aggregation of amyloid proteins with the use of time-lapse AFM.

A novel pathway for amyloids self-assembly in aggregates at nanomolar concentration mediated by the interaction with surfaces.

A limitation of the amyloid hypothesis in explaining the development of neurodegenerative diseases is that the level of amyloidogenic polypeptide in vivo is below the critical concentration required to form the aggregates observed in post-mortem brains. We discovered a novel, on-surface aggregation pathway of amyloidogenic polypeptide that eliminates this long-standing controversy. We applied atomic force microscope (AFM) to demonstrate directly that on-surface aggregation takes place at a concentration at which no aggregation in solution is observed. The experiments were performed with the full-size Aß protein (Aß42), a decapeptide Aß(14-23) and α-synuclein; all three systems demonstrate a dramatic preference of the on-surface aggregation pathway compared to the aggregation in the bulk solution. Time-lapse AFM imaging, in solution, show that over time, oligomers increase in size and number and release in solution, suggesting that assembled aggregates can serve as nuclei for aggregation in bulk solution. Computational modeling performed with the all-atom MD simulations for Aß(14-23) peptide shows that surface interactions induce conformational transitions of the monomer, which facilitate interactions with another monomer that undergoes conformational changes stabilizing the dimer assembly. Our findings suggest that interactions of amyloidogenic polypeptides with cellular surfaces play a major role in determining disease onset.

Self-assembly of the full-length amyloid Aß42 protein in dimers.

The self-assembly of amyloid (Aß) proteins into nano-aggregates is a hallmark of Alzheimer's disease (AD) development, yet the mechanism of how disordered monomers assemble into aggregates remains elusive. Here, we applied long-time molecular dynamics simulations to fully characterize the assembly of Aß42 monomers into dimers. Monomers undergo conformational changes during their interaction, but the resulting dimer structures do not resemble those found in fibril structures. To identify natural conformations of dimers among a set of simulated ones, validation approaches were developed and applied, and a subset of dimer conformations were characterized. These dimers do not contain long ß-strands that are usually found in fibrils. The dimers are stabilized primarily by interactions within the central hydrophobic regions and the C-terminal regions, with a contribution from local hydrogen bonding. The dimers are dynamic, as evidenced by the existence of a set of conformations and by the quantitative analyses of the dimer dissociation process.

Nanoprobing of the effect of Cu(2+) cations on misfolding, interaction and aggregation of amyloid ß peptide.

Misfolding and aggregation of the amyloid ß-protein (Aß) are hallmarks of Alzheimer's disease. Both processes are dependent on the environmental conditions, including the presence of divalent cations, such as Cu(2+). Cu(2+) cations regulate early stages of Aß aggregation, but the molecular mechanism of Cu(2+) regulation is unknown. In this study we applied single molecule AFM force spectroscopy to elucidate the role of Cu(2+) cations on interpeptide interactions. By immobilizing one of two interacting Aß42 molecules on a mica surface and tethering the counterpart molecule onto the tip, we were able to probe the interpeptide interactions in the presence and absence of Cu(2+) cations at pH 7.4, 6.8, 6.0, 5.0, and 4.0. The results show that the presence of Cu(2+) cations change the pattern of Aß interactions for pH values between pH 7.4 and pH 5.0. Under these conditions, Cu(2+) cations induce Aß42 peptide structural changes resulting in N-termini interactions within the dimers. Cu(2+) cations also stabilize the dimers. No effects of Cu(2+) cations on Aß-Aß interactions were observed at pH 4.0, suggesting that peptide protonation changes the peptide-cation interaction. The effect of Cu(2+) cations on later stages of Aß aggregation was studied by AFM topographic images. The results demonstrate that substoichiometric Cu(2+) cations accelerate the formation of fibrils at pH 7.4 and 5.0, whereas no effect of Cu(2+) cations was observed at pH 4.0. Taken together, the combined AFM force spectroscopy and imaging analyses demonstrate that Cu(2+) cations promote both the initial and the elongation stages of Aß aggregation, but protein protonation diminishes the effect of Cu(2+).

Mechanism of amyloid ß-protein dimerization determined using single-molecule AFM force spectroscopy.

Aß42 and Aß40 are the two primary alloforms of human amyloid ß-protein (Aß). The two additional C-terminal residues of Aß42 result in elevated neurotoxicity compared with Aß40, but the molecular mechanism underlying this effect remains unclear. Here, we used single-molecule force microscopy to characterize interpeptide interactions for Aß42 and Aß40 and corresponding mutants. We discovered a dramatic difference in the interaction patterns of Aß42 and Aß40 monomers within dimers. Although the sequence difference between the two peptides is at the C-termini, the N-terminal segment plays a key role in the peptide interaction in the dimers. This is an unexpected finding as N-terminal was considered as disordered segment with no effect on the Aß peptide aggregation. These novel properties of Aß proteins suggests that the stabilization of N-terminal interactions is a switch in redirecting of amyloids form the neurotoxic aggregation pathway, opening a novel avenue for the disease preventions and treatments.

Exploring the energy profile of human IgG/rat anti-human IgG interactions by dynamic force spectroscopy.

Interactions between antibody and antigen molecules play essential roles in biological recognition processes as well as medical diagnosis. Therefore, an understanding of the underlying mechanism of antibody-antigen interactions at the single molecular level would be beneficial. In the present study, human immunoglobulin (IgG) tethered cantilevers and rat anti-human IgG functionalized gold surfaces were fabricated by using self-assembled monolayers method. Dynamic force spectroscopy was employed to characterize the interactions between human (IgG) and rat anti-human IgG at the single-molecule level. The unbinding forces were determined to be 44.6 ± 0.8, 65.8 ± 3.0, 108.1 ± 4.1, 131.1 ± 11.2, 149.5 ± 4.7, 239.5 ± 3.1 and 294.7 ± 7.7 pN with ramping loading rates of 514, 1,127, 3,058, 7,215, 15,286, 31,974 and 50,468 pN s(-1), respectively. In addition, the unbinding forces were found to be increasing with the logarithm of apparent loading rates in a linear way. Fitting data group resulted in two distinct linear parts, suggesting there are two energy barriers. The corresponding distances in the bound and transition states (x ( ß )) and the dissociation rates (K ( off )) were calculated to be 0.129 ± 0.006 nm, 3.986 ± 0.162 s(-1) for the outer barrier and 0.034 ± 0.001 nm, 36.754 ± 0.084 s(-1) for the inner barrier. Such findings hold promise of screening novel drugs and discerning different unbinding modes of biological molecules.

Imaging recognition events between human IgG and rat anti-human IgG by atomic force microscopy.

Chemically immobilized rat anti-human immunoglobulin (IgG) monolayers on thiols modified gold substrates were fabricated using self-assembled monolayer (SAM) method. The antibody monolayers were imaged before and after free human IgG treated, whilst recognition events between antigen and antibody were monitored by contact mode atomic force microscopy (CM-AFM) and tapping mode AFM (TM-AFM), with topographic and/or phase images being recorded. The obtained images with different surface compositions show distinct nanostructures, indicating occurrence of recognition and binding events of antigen-antibody. The size of the observed surface structures of the antibody monolayer, when tip broaden effect had been taken into account, was very close to the actual size of the antibody molecule. Thus, these results suggest CM-AFM is capable of, and proven satisfactory in detecting protein-protein interactions (PPIs), providing the sample was prepared appropriately and the scanning parameters were set adequately. Moreover, phase imaging can serve as a real time contrast enhancement technique to TM-AFM in terms of highlighting edges and clearly observing fine features.

Probing specific interaction forces between human IgG and rat anti-human IgG by self-assembled monolayer and atomic force microscopy.

Interaction forces between biological molecules such as antigen and antibody play important roles in many biological processes, but probing these forces remains technically challenging. Here, we investigated the specific interaction and unbinding forces between human IgG and rat anti-human IgG using self assembled monolayer (SAM) method for sample preparation and atomic force microscopy (AFM) for interaction force measurement. The specific interaction force between human IgG and rat anti-human IgG was found to be 0.6-1.0 nN, and the force required for unbinding a single pair of human IgG and rat anti-human IgG was calculated to be 144 ± 11 pN. The results are consistent with those reported in the literatures. Therefore, SAM for sample preparation combined with AFM for interaction measurement is a relatively simple, sensitive and reliable technique to probe specific interactions between biological molecules such as antigen and antibody.

Preparation and Characterization of Covalently Binding of Rat Anti-human IgG Monolayer on Thiol-Modified Gold Surface.

The 16-mercaptohexadecanoic acid (MHA) film and rat anti-human IgG protein monolayer were fabricated on gold substrates using self-assembled monolayer (SAM) method. The surface properties of the bare gold substrate, the MHA film and the protein monolayer were characterized by contact angle measurements, atomic force microscopy (AFM), grazing incidence X-ray diffraction (GIXRD) method and X-ray photoelectron spectroscopy, respectively. The contact angles of the MHA film and the protein monolayer were 18° and 12°, respectively, all being hydrophilic. AFM images show dissimilar topographic nanostructures between different surfaces, and the thickness of the MHA film and the protein monolayer was estimated to be 1.51 and 5.53 nm, respectively. The GIXRD 2θ degrees of the MHA film and the protein monolayer ranged from 0° to 15°, significantly smaller than that of the bare gold surface, but the MHA film and the protein monolayer displayed very different profiles and distributions of their diffraction peaks. Moreover, the spectra of binding energy measured from these different surfaces could be well fitted with either Au4f, S2p or N1s, respectively. Taken together, these results indicate that MHA film and protein monolayer were successfully formed with homogeneous surfaces, and thus demonstrate that the SAM method is a reliable technique for fabricating protein monolayer.