Room temperature gas sensors for NH3 detection based on the heterojunction of 2D Ti3C2Tx MXenes and Bi2S3.

Bi2S3/Ti3C2Tx nanomaterials were successfully prepared through a simple hydrothermal method. Various methods were used for their characterization, including XRD, XPS, SEM, EDS, and BET, along with testing their gas-sensing properties. The results showed that the response value to 100 ppm ammonia at room temperature reached 107%, which was 14.1 times higher than that of pure few-layer MXene. After undergoing anti-humidity interference testing, we observed that Bi2S3/Ti3C2Tx exhibited a higher response value in real-time monitoring of ammonia as humidity increased. Specifically, under 90% humidity conditions, its response value reached 1.32 times that of normal humidity conditions. This exceptional moisture resistance ensures that the sensor can maintain stability, and even exhibit superior performance, in harsh environments. Therefore, it possesses excellent selectivity, high-moisture-resistance, and long-term stability, making it significant in the field of medical and health monitoring.

α-Fe2O3/TiO2/Ti3C2Tx Nanocomposites for Enhanced Acetone Gas Sensors.

Metal oxide semi-conductors are widely applied in various fields due to their low cost, easy processing, and good compatibility with microelectronic technology. In this study, ternary α-Fe2O3/TiO2/Ti3C2Tx nanocomposites were prepared via simple hydrothermal and annealing treatments. The composition, morphology, and crystal structure of the samples were studied using XPS, SEM, EDS, XRD, and multiple other testing methods. The gas-sensing measurement results suggest that the response value (34.66) of the F/M-3 sensor is 3.5 times higher than the pure α-Fe2O3 sensor (9.78) around 100 ppm acetone at 220°C, with a rapid response and recovery time (10/7 s). Furthermore, the sensors have an ultra-low detection limit (0.1 ppm acetone), excellent selectivity, and long-term stability. The improved sensitivity of the composites is mainly attributed to their excellent metal conductivity, the unique two-dimensional layered structure of Ti3C2Tx, and the heterojunction formed between the nanocomposite materials. This research paves a new route for the preparation of MXene derivatives and metal oxide nanocomposites.

High Sensitivity Bi2O3/Ti3C2Tx Ammonia Sensor Based on Improved Synthetic MXene Method at Room Temperature.

The MXene Ti3C2Tx was synthesized using hydrofluoric acid and an improved multilayer method in this study. Subsequently, a Bi2O3/Ti3C2Tx composite material was produced through hydrothermal synthesis. This composite boasts a unique layered structure, offering a large surface area that provides numerous contact and reaction sites, facilitating the adsorption of ammonia on its surface. The prepared Bi2O3/Ti3C2Tx-based sensor exhibits excellent sensing performance for ammonia gas, including high responsiveness, good repeatability, and rapid response-recovery time. The sensor's response to 100 ppm ammonia gas is 61%, which is 11.3 times and 1.6 times the response values of the Ti3C2Tx gas sensor and Bi2O3 gas sensor, with response/recovery times of 61 s/164 s at room temperature, respectively. Additionally, the gas sensitivity mechanism of the Bi2O3/Ti3C2Tx-based sensor was analyzed, and the gas sensing response mechanism was proposed. This study shows that the sensor can effectively enhance the accuracy and precision of ammonia detection at room temperature and has a wide range of application scenarios.

Coaxially Bi/ZnO@ZnSe array photocathode enables highly efficient CO2 to C1 conversion via long-lived high-energy photoelectrons.

The key aspect of the photoelectrochemical CO2 reduction reaction (PEC CO2 RR) lies in designing cathode materials that can generate high-energy photoelectrons, enabling the activation and conversion of CO2 into high-value products. In this study, a coaxially wrapped ZnO@ZnSe array heterostructure was synthesized using a simple anion exchange strategy and metallic Bi nanoparticles (NPs) were subsequently deposited on the surface to construct a Bi/ZnO@ZnSe photocathode with high CO2 conversion capability. This array photocathode possesses a large aspect ratio, which simultaneously satisfies a low charge carrier migration path and a large specific surface area that facilitates mass transfer. Additionally, the barrier formed at the n-n heterojunction interface hinders the transfer of high-energy photoelectrons from ZnSe to lower energy levels, resulting in their rapid capture by Bi while maintaining a relatively long lifetime. These captured electrons act as active sites, efficiently converting CO2 into CO with a Faradaic efficiency above 88.9% at -0.9 V vs. RHE and demonstrating superior stability. This work provides a novel approach for synthesizing high-energy photoelectrode materials with long lifetimes.