Management after acute injury of the anterior cruciate ligament (ACL). Part 3: Recommendation on surgical treatment.

PURPOSE: The aim of this consensus project was to give recommendations regarding surgical treatment of the anterior cruciate ligament (ACL) injured patient. METHODS: For this consensus process, an expert, steering and rating group was formed. In an initial online meeting, the steering group, together with the expert group, formed various key topic complexes for which multiple questions were formulated. For each key topic, a structured literature search was performed by the steering group. The results of the literature review were sent to the rating group with the option to give anonymous comments until a final consensus voting was performed. Sufficient consensus was defined as 80% agreement. RESULTS: During this consensus process, 30 topics regarding the surgical management and technique of ACL reconstruction were identified. The literature search for each key question resulted in 30 final statements. Of these 30 final statements, all achieved consensus. CONCLUSIONS: This consensus process has shown that surgical treatment of ACL injury is a complex process. Various surgical factors influence patient outcomes. The proposed treatment algorithm can be used as a decision aid for the surgeon. LEVEL OF EVIDENCE: Level V.

Management after acute rupture of the anterior cruciate ligament (ACL). Part 1: ACL reconstruction has a protective effect on secondary meniscus and cartilage lesions.

PURPOSE: The aim of this consensus project was to validate which endogenous and exogenous factors contribute to the development of post-traumatic osteoarthritis and to what extent ACL (anterior cruciate ligament) reconstruction can prevent secondary damage to the knee joint. Based on these findings, an algorithm for the management after ACL rupture should be established. METHODS: The consensus project was initiated by the Ligament Injuries Committee of the German Knee Society (Deutsche Kniegesellschaft, DKG). A modified Delphi process was used to answer scientific questions. This process was based on key topic complexes previously formed during an initial face-to-face meeting of the steering group with the expert group. For each key topic, a comprehensive review of available literature was performed by the steering group. The results of the literature review were sent to the rating group with the option to give anonymous comments until a final consensus voting was performed. Consensus was defined a-priori as eighty percent agreement. RESULTS: Of the 17 final statements, 15 achieved consensus, and 2 have not reached consensus. Results of the consensus were summarized in an algorithm for the management after ACL rupture (infographic/Fig. 2). CONCLUSION: This consensus process has shown that the development of post-traumatic osteoarthritis is a complex multifactorial process. Exogenous (primary and secondary meniscus lesions) and endogenous factors (varus deformity) play a decisive role. Due to the complex interplay of these factors, an ACL reconstruction cannot always halt post-traumatic osteoarthritis of the knee. However, there is evidence that ACL reconstruction can prevent secondary joint damage such as meniscus lesions and that the success of meniscus repair is higher with simultaneous ACL reconstruction. Therefore, we recommend ACL reconstruction in case of a combined injury of the ACL and a meniscus lesion which is suitable for repair. LEVEL OF EVIDENCE: Level V.

Management after acute injury of the anterior cruciate ligament (ACL), part 2: management of the ACL-injured patient.

PURPOSE: The aim of this consensus project was to create a treatment algorithm for the management of the ACL-injured patient which can serve as an aid in a shared decision-making process. METHODS: For this consensus process, a steering and a rating group were formed. In an initial face-to-face meeting, the steering group, together with the expert group, formed various key topic complexes for which various questions were formulated. For each key topic, a structured literature search was performed by the steering group. The results of the literature review were sent to the rating group with the option to give anonymous comments until a final consensus voting was performed. Sufficient consensus was defined as 80% agreement. RESULTS: During this consensus process, 15 key questions were identified. The literature search for each key question resulted in 24 final statements. Of these 24 final statements, all achieved consensus. CONCLUSIONS: This consensus process has shown that ACL rupture is a complex injury, and the outcome depends to a large extent on the frequently concomitant injuries (meniscus and/or cartilage damage). These additional injuries as well as various patient-specific factors should play a role in the treatment decision. The present treatment algorithm represents a decision aid within the framework of a shared decision-making process for the ACL-injured patient. LEVEL OF EVIDENCE: Level V.

Effect of shape and size of supraspinatus tears on rotator cuff strain distribution: an in vitro study.

BACKGROUND: The impact of the size and shape of a supraspinatus tear on the strain of the intact rotator cuff and the kinematics of the shoulder is still unknown. This, however, can be relevant when deciding whether surgical reconstruction is required to prevent an increase in a tendon defect. In this study, the effect of tear width and shape on rotator cuff strain and glenohumeral kinematics was evaluated during active abduction. METHODS: Twelve fresh-frozen cadaveric shoulders with intact rotator cuffs were used in this study. We created 50% and 100% wide (full-thickness) crescent-shaped (CS) tears (n = 6) and reverse L-shaped (rLS) tears (n = 6) in the supraspinatus tendon and measured strain and kinematics during active humeral elevation until 30°. RESULTS: Both tear shapes and sizes led to an increase in internal rotation, supraspinatus loading force, and superior translation of the humerus. For the 100% wide tear size, anterior translation was observed in the CS tear group, whereas in the rLS tear group, this translation occurred mainly in the posterior direction. Strain was higher in the infraspinatus during the first 25° of abduction in comparison with the supraspinatus tendon in both tear shape groups. An analysis of the anterior and posterior tear borders showed a higher strain concentration on the same side of the tear in the CS tear group with 50% and 100% wide tears. CONCLUSIONS: The influence of different tear shapes on translation in the anterior-posterior direction was evident as both CS and rLS tears led to an oppositely directed translation of the humeral head. The strain analysis showed a stress-shielding effect of the infraspinatus at the beginning of abduction. Therefore, special attention must be paid to correctly identify the tear extension and adequately reconstruct the rotator cuff footprint. Moreover, the constant location of maximum strain in the CS tear group may lead to an earlier progression than in the rLS tear group.

Osteogenic Differentiation of Human Adipose-Derived Stem Cells Seeded on a Biomimetic Spongiosa-like Scaffold: Bone Morphogenetic Protein-2 Delivery by Overexpressing Fascia.

Human adipose-derived stem cells (hADSCs) have the capacity for osteogenic differentiation and, in combination with suitable biomaterials and growth factors, the regeneration of bone defects. In order to differentiate hADSCs into the osteogenic lineage, bone morphogenetic proteins (BMPs) have been proven to be highly effective, especially when expressed locally by route of gene transfer, providing a constant stimulus over an extended period of time. However, the creation of genetically modified hADSCs is laborious and time-consuming, which hinders clinical translation of the approach. Instead, expedited single-surgery gene therapy strategies must be developed. Therefore, in an in vitro experiment, we evaluated a novel growth factor delivery system, comprising adenoviral BMP-2 transduced fascia tissue in terms of BMP-2 release kinetics and osteogenic effects, on hADSCs seeded on an innovative biomimetic spongiosa-like scaffold. As compared to direct BMP-2 transduction of hADSCs or addition of recombinant BMP-2, overexpressing fascia provided a more uniform, constant level of BMP-2 over 30 days. Despite considerably higher BMP-2 peak levels in the comparison groups, delivery by overexpressing fascia led to a strong osteogenic response of hADSCs. The use of BMP-2 transduced fascia in combination with hADSCs may evolve into an expedited single-surgery gene transfer approach to bone repair.

Impact of femoro-tibial size combinations and TKA design on kinematics.

INTRODUCTION: The variability in patients' femoral and tibial anatomy requires to use different tibia component sizes with the same femoral component size. These size combinations are allowed by manufacturers, but the clinical impact remains unclear. Therefore, the goals of our study were to investigate whether combining different sizes has an impact on the kinematics for two well-established knee systems and to compare these systems' kinematics to the native kinematics. MATERIALS AND METHODS: Six fresh frozen knee specimens were tested in a force controlled knee rig before and after implantation of a cruciate retaining (CR) and a posterior-stabilized (PS) implant. Femoro-tibial kinematics were recorded using a ultrasonic-based motion analysis system while performing a loaded squat from 30° to 130°. In each knee, the original best fit inlay was then replaced by different inlays simulating a smaller or bigger tibia component. The kinematics obtained with the simulated sizes were compared to the original inlay kinematics using descriptive statistics. RESULTS: For all size combinations, the difference to the original kinematics reached an average of 1.3 ± 3.3 mm in translation and - 0.1 ± 1.2° in rotation with the CR implant. With the PS implant, the average differences reached 0.4 ± 2.7 mm and  - 0.2 ± 0.8°. Among all knees, no size combination consistently resulted in significantly different kinematics. Each knee showed a singular kinematic pattern. For both knee systems, the rotation was smaller than in the native knee, but the direction of the rotation was preserved. The PS showed more rollback and the CR less rollback than the native knee. CONCLUSION: TKA systems designed with a constant tibio-femoral congruency among size combinations should enable to combine different sizes without having substantial impact on the kinematics. The rotational pattern was preserved by both TKA systems, while the rollback could only be maintained by the PS design.

Osteoinduction within adipose tissue fragments by heterodimeric bone morphogenetic Proteins-2/6 and -2/7 versus homodimeric bone morphogenetic protein-2: Therapeutic implications for bone regeneration.

BACKGROUND: Fragments of subcutaneous adipose tissue that have been genetically modified to express bone morphogenetic protein-2 (BMP-2) regenerate large segmental osseous lesions in rodents. Gene-activated adipose tissue can be implanted into osseous defects without prior cell extraction and cell culture. The present study aimed to explore whether the heterodimers BMP-2/6 or BMP-2/7 exceed the osteoinductive effect of BMP-2 on adipose tissue. METHODS: In an in vitro tissue culture system, freshly harvested rat subcutaneous adipose tissue was cultivated in the presence of either BMP-2 or BMP-2/6 or BMP-2/7 at a high (200 ng/ml) and low (50 ng/ml) concentration. Gene expression analysis as well as histological and immunohistochemical methods were applied to test for osteoinduction. RESULTS: A concentration of 200 ng/ml of homodimeric BMP-2 induced osteogenic differentiation most potently, showing more calcification and a higher expression level of bone markers than both concentrations of BMP-2/6 or -2/7. A concentration of 50 ng/ml of BMP-2 was a significantly stronger osteogenic inducer than both concentrations of BMP-2/6 and the low concentration of BMP-2/7. The most potent heterodimeric driver of osteoinduction was BMP-2/7 at a high concentration, demonstrating effects similar to those of BMP-2 at a low concentration. CONCLUSIONS: Homodimeric BMP-2 evoked osteoinduction within adipose tissue more potently and at a lower concentration than heterodimeric BMP-2/6 or BMP-2/7. This result agrees well with the fact that it might be easier to translate adipose grafts activated by homodimeric BMP-2 clinically. Preclinical in vivo gene transfer studies are necessary to confirm the results of the present study.

Editorial Commentary: Bone Marrow Lesion as a Prognostic Factor for Osteochondral Allograft Transplantation of Cartilage Defects in the Knee Joint.

Bone marrow lesions (BML) can be categorized as ischemic, mechanical, or reactive. BML are associated with cartilage loss and can be interpreted as a "stress-related bone marrow edema," and are a consequence of subchondral overload due to lack of cartilaginous cushioning and load distribution. The prevalence, depth, and cross-sectional area of BML increase with the degree cartilage defect. There is a risk that bone marrow edema will progress to subchondral cysts, and cysts are a point of no return of a BML. Thus, successful treatment of cartilage damage requires causally addressing the bone marrow edema, and it is also crucial for the therapy of the BML that cartilage damage is completely treated. A postoperative BML is associated with incomplete defect coverage due to incomplete ingrowth of the osteochondral allograft with missing closure of the cartilage surface, or insufficient containment. Ideal treatment for a circumscribed subchondral BML is a single cylinder replacing the damaged cartilage and the entire BML with an osteochondral allograft. In the case of larger defects or larger BML, successful treatment of the cartilage defect is the critical point.

Effect of the defect localization and size on the success of third-generation autologous chondrocyte implantation in the knee joint.

INTRODUCTION: Femoral and patellar cartilage defects with a defect size > 2.5 cm2 are a potential indication for an autologous chondrocyte implantation (ACI). However, the influence of the localization and the absolute and relative defect size on the clinical outcome has not yet been determined. The purpose of this study is to analyze the influence of the localization and the absolute and relative defect size on the clinical outcome after third-generation autologous chondrocyte implantation. METHODS: A total of 50 patients with cartilage defects of the knee were treated with third-generation autologous chondrocyte implantation (Novocart® 3D). A match paired analysis was performed of 25 treated femoral and 25 treated patella defects with a follow-up of three years. MRI data was used to do the manual segmentation of the cartilage layer throughout the knee joint. The defect size was determined by taking the defect size measured in the MRI in relation to the whole cartilage area. The clinical outcome was measured by the IKDC score and VAS pre-operatively and after six, 12, 24, and 36 months post-operatively. RESULTS: IKDC and VAS scores showed a significant improvement from the baseline in both groups. Femoral cartilage defects showed significantly superior clinical results in the analyzed scores compared to patellar defects. The femoral group improved IKDC from 33.9 (SD 18.1) pre-operatively to 71.5 (SD 17.4) after three years and the VAS from 6.9 (SD 2.9) pre-operatively to 2.4 (SD 2.5) after three years. In the patellar group, IKDC improved from 36.1 (SD 12.6) pre-operatively to 54.7 (SD 20.3) after three years and the VAS improved from 6.7 (SD 2.8) pre-operatively to 3.4 (SD 2.) after three years. Regarding the defect size, results showed that the same absolute defect size at med FC (4.8, range 2-15) and patella (4.6, range 2-12) has a significantly different share of the total cartilaginous size of the joint compartment (med FC: 6.7, range 1.2-13.9; pat: 18.9, range 4.0-47.0). However, there was no significant influence of the relative defect size on the clinical outcome in either patellar or femoral localization. CONCLUSION: Third-generation autologous chondrocyte implantation in ACI-treated femoral cartilage defects leads to a superior clinical outcome in a follow-up of three years compared with patellar defects. No significant influence of the defect size was found in either femoral or patellar cartilage defects.

Synergistic interaction of hTGF-ß3 with hBMP-6 promotes articular cartilage formation in chitosan scaffolds with hADSCs: implications for regenerative medicine.

BACKGROUND: Human TGF-ß3 has been used in many studies to induce genes coding for typical cartilage matrix components and accelerate chondrogenic differentiation, making it the standard constituent in most cultivation media used for the assessment of chondrogenesis associated with various stem cell types on carrier matrices. However, in vivo data suggests that TGF-ß3 and its other isoforms also induce endochondral and intramembranous osteogenesis in non-primate species to other mammals. Based on previously demonstrated improved articular cartilage induction by a using hTGF-ß3 and hBMP-6 together on hADSC cultures and the interaction of TGF- ß with matrix in vivo, the present study investigates the interaction of a chitosan scaffold as polyanionic polysaccharide with both growth factors. The study analyzes the difference between chondrogenic differentiation that leads to stable hyaline cartilage and the endochondral ossification route that ends in hypertrophy by extending the usual panel of investigated gene expression and stringent employment of quantitative PCR. RESULTS: By assessing the viability, proliferation, matrix formation and gene expression patterns it is shown that hTGF-ß3 + hBMP-6 promotes improved hyaline articular cartilage formation in a chitosan scaffold in which ACAN with Col2A1 and not Col1A1 nor Col10A1 where highly expressed both at a transcriptional and translational level. Inversely, hTGF-ß3 alone tended towards endochondral bone formation showing according protein and gene expression patterns. CONCLUSION: These findings demonstrate that clinical therapies should consider using hTGF-ß3 + hBMP-6 in articular cartilage regeneration therapies as the synergistic interaction of these morphogens seems to ensure and maintain proper hyaline articular cartilage matrix formation counteracting degeneration to fibrous tissue or ossification. These effects are produced by interaction of the growth factors with the polysaccharide matrix.

Patient-Reported and Magnetic Resonance Imaging Outcomes of Third-Generation Autologous Chondrocyte Implantation After 10 Years.

PURPOSE: To evaluate the long-term clinical and radiologic outcomes of third-generation autologous chondrocyte implantation (ACI) for the treatment of focal cartilage defects of the knee. METHODS: Data capture was carried out between 2004 and 2018. Included were patients with cartilage defects of the knee joint with an International Cartilage Repair Society grade of III or higher treated with third-generation ACI who had a minimum follow-up period of 10 years. International Knee Documentation Committee scores and assessment of pain at rest and on movement using visual analog scale scores were captured preoperatively and at 6 months postoperatively, as well as annually thereafter. In addition, we performed magnetic resonance imaging examinations in 13 cases after 10 years. The MOCART (Magnetic Resonance Observation of Cartilage Repair Tissue) score was used to evaluate the ACI cartilage. RESULTS: A total of 54 patients met the inclusion criteria. Of these, 30 reached the 10-year follow-up point and were included in this assessment. At 10 years postoperatively, all clinical outcome parameters showed a statistically significant improvement compared with the preoperative situation, with a responder rate of 70%. The average MOCART (Magnetic Resonance Observation of Cartilage Repair Tissue) score after 10 years was 59.2 points (range, 20-100 points), and over 60% of the evaluated patients showed good integration of the implant at 10 years postoperatively. CONCLUSIONS: The clinical and radiologic findings of this study show that third-generation ACI is a suitable and effective option in the treatment of full-thickness cartilage defects of the knee. At 10 years after surgery, third-generation ACI shows stable results and leads to significant improvement in all clinical outcome parameters. Despite these results, revision surgery after third-generation ACI is common and was needed in 23% of patients in this study. LEVEL OF EVIDENCE: Level IV, therapeutic case series.

Varus or valgus positioning of the tibial component of a unicompartmental fixed-bearing knee arthroplasty does not increase wear.

PURPOSE: Higher revision rates were shown in varus- or valgus-positioned tibias in unicompartmental knee arthroplasty (UKA), but more than 15% of UKA prostheses are implanted with more than 5° of varus or valgus. This study aimed to analyze the wear rate in UKA when implanting the tibial component in either varus or valgus position versus a neutral placement at 90° to the tibial anatomical axis. The study hypothesized that a 5° varus or valgus positioning of the tibial plateau will generate less wear compared to a neutral alignment. METHODS: Wear was experimentally analyzed on a medial anatomical fixed-bearing unicompartmental knee prosthesis (Univation, Aesculap, Germany) in vitro with a customized, four-station, servohydraulic knee wear simulator, reproducing the walking cycle. The forces, loading and range of motion were applied as specified in the ISO 14243-1:2002, 5 million cycles were analyzed. The tibial components of the medial prostheses were inserted in a neutral position, with 5° varus, and 5° valgus (n = 3, each group). RESULTS: The wear rate decreased significantly with a 5° varus positioning (6.30 ± 1.38 mg/million cycles) and a 5° valgus positioning (4.96 ± 2.47 mg/million cycles) compared to the neutral position (12.16 ± 1.26 mg/million cycles) (p < 0.01 for the varus and the valgus position). The wear area on the inlay was slightly reduced in the varus and valgus group. CONCLUSION: A varus or valgus "malpositioning" up to 5° will not lead to an increased wear. Wear was even less because of the reduced articulating contact area between the inlay and the femur. A slight varus positioning of the tibial component (parallel to the anatomical joint line) positioning can be advocated from a point of wear. LEVEL OF EVIDENCE: Experimental study.

The effect of autologous Achilles bursal tissue implants in tendon-to-bone healing of rotator cuff tears in rats.

BACKGROUND: The aim of this study was to investigate the influence of autologous bursal tissue derived from the Achilles bursa on tendon-to-bone healing after rotator cuff tear repair in a rat model. METHODS: A total of 136 Sprague-Dawley rats were randomly assigned to either an untreated or a bursal tissue application group or biomechanical testing and histologic testing after rotator cuff repair. After separating the supraspinatus tendon close to the greater tuberosity, the tendon was reattached either unaltered or with a bursal tissue interposition sewn onto the interface. Immunohistologic analysis was performed 1 and 7 weeks after supraspinatus tendon reinsertion. Biomechanical testing of the tendon occurred 6 and 7 weeks after reinsertion. RESULTS: Immunohistologic results demonstrated a significantly higher percentage of Type II collagen (P = .04) after 1 and 7 weeks in the tendon-to-bone interface using autologous bursal tissue in comparison to control specimens. The bursa group showed a significantly higher collagen I to III quotient (P = .03) at 1 week after surgery in comparison to the 7-week postsurgery bursa groups and controls. Biomechanical assessment showed that overall tendon stiffness (P = .002) and the tendon viscoelasticity in the bursa group (P = .003) was significantly improved after 6 and 7 weeks. There was no significant difference (P = .55) in force to failure between the bursa group and the control group after 6 and 7 weeks. CONCLUSION: Autologous bursal tissue derived from the Achilles bursa and implanted to the tendon-to-bone interface after rotator cuff repair facilitates a faster healing response to re-establish the biologic and biomechanical integrity of the rotator cuff in rats.

[Realistic preclinical finite element simulation in knee and hip replacements]. / Realitätsnahe Finite-Elemente-Simulation in der präklinischen Testung von Knie- und Hüftimplantaten.

BACKGROUND: In the process of developing an implant, computer simulation involving finite element (FE) methods allows the early identification of design-related issues, thus reducing the development process to a minimum. In addition, the FE simulation is used for selecting testing combinations in order to provide the relevant authority with proof of a "worst-case" construct scenario for the subsequent experimental fatigue test. RESULTS: Research studies with FE simulations show that implant positioning may affect mechanical loads under certain circumstances and, therefore, influence the preclinical evaluation of the prostheses. DISCUSSION: Although the FE simulation currently contributes significantly to preclinical testing, a standardization of the calculation models allowing comparability of results is lacking. Furthermore, the development of new dynamic and realistic models is necessary in order to identify complex damage modes that currently cannot be reproduced experimentally. When considering everyday clinical life in particular, models that can reproduce intraoperative kinematic changes and the resulting incorrect loads of the implant, as well as address these problems by changing the position or design of the prosthesis, are necessary and would help in future.

Osteoinduction within BMP-2 transduced muscle tissue fragments with and without a fascia layer: implications for bone tissue engineering.

Bone can be engineered in vivo by implantation of gene-activated muscle tissue fragments. This expedited approach may be further improved by use of muscle tissue with attached fascia. The aim of this in vitro study was to provide an in depth comparison of the osteogenic differentiation capacity of muscle alone and muscle with fascia after BMP-2 transduction. Skeletal muscle tissue from rats was cut into pieces with and without a fascia layer on the surface. Adenoviral BMP-2 or GFP vectors were used for transduction. Osteogenic differentiation within the tissue fragments was evaluated and compared by qRT-PCR, alizarin red S staining, histomorphometry and immunohistology. Transduction efficiency and level of transgene expression were higher for muscle with fascia than muscle alone. Transduction with BMP-2 led to a significant upregulation of bone marker genes, proteins, and calcium deposition in both groups. Interestingly, histological evaluation revealed that osteoinduction did not occur within the fascia layer itself. The upregulation of bone marker genes in muscle with fascia was significantly lower after 2 weeks but similar after 4 weeks of in vitro culture in comparison to muscle alone. The fascia layer led to higher transduction efficiency and enhanced BMP-2 expression. Despite fascia's lower capacity for osteogenic differentiation, muscle implants may benefit from the fascia layer by the improved ability to deliver BMP-2. The presented data may contribute to the development of a novel, cost-effective, single-surgery bone engineering technology and encourage the evaluation of the osteoregenerative potential of muscle with fascia in an animal model.

Accuracy of a non-invasive CT-based measuring technique for cement penetration depth in human tibial UKA.

BACKGROUND: Aseptic loosening of the tibial component remains a major cause of failure in unicompartmental knee arthroplasty (UKA) and may be related to micro-motion at the cement-bone interface due to insufficient cement penetration depth. Cement penetration is therefore taken as an indicator of solid fixation strength and primary stability. However, its non-invasive clinical assessment remains difficult in vivo as conventional x-ray is prone to distortion and CT-scans (computed tomography) are difficult to assess due to metal artifacts. The purpose of this study was to develop and validate a reliable in vivo measuring technique of cement penetration depth in human tibial UKA. METHODS: In an experimental setting, twelve UKA were implanted in fresh-frozen human cadaver knees using a minimal-invasive medial approach. Cement penetration depth was then measured via 1) virtual 3D-models based on metal artifact reduced CT-scans and 2) histological evaluation of nine serial cross-section cuts through the implant-cement-bone-interface. Subsequently, a concordance analysis between the two measuring techniques was conducted. RESULTS: The average cement penetration depth was 1) 2.20 mm (SD 0.30 mm) measured on metal artifact reduced CT-scans and 2) 2.21 mm (SD = 0.42) measured on serial cuts (p = 0.956). The mean difference between both techniques was 0.01 mm (SD 0.31 mm) and the Person correlation coefficient was r = 0.686 (p = 0.014). All differences were within the upper and lower limit of agreement. There was no evidence of any significant proportional bias between both techniques (p = 0.182). CONCLUSIONS: CT-based non-invasive measurement of cement penetration depth delivers reliable results in measuring the penetration depth in tibial UKA. Thereby, it enables clinicians and researchers to assess the cement penetration for in vivo diagnostics in the clinical setting as well as in vitro biomechanical research with subsequent application of load to failure on the implant-cement-bone-interface.

Impact of a double-layer cementing technique on the homogeneity of cementation and the generation of loose bone cement fragments in tibial unicompartmental knee arthroplasty.

BACKGROUND: The objective of this study was to evaluate the impact of a single- vs. double-layer cementing technique on morphological cementation and the generation of microscopic cement layers or loose cement fragments in unicompartmental knee arthroplasty (UKA). METHODS: UKAs were implanted in 12 cadaver knees. The specimens were divided into two groups of comparable bone mineral density. Six UKAs were implanted using a single-layer cementing technique (group A) and six UKAs were implanted using a double-layer cementing technique (group B). Morphological cementation was assessed on nine cuts through the implant-cement-bone interface in the frontal plane. Loose bone cement fragments and the microscopically quality of layer formation were evaluated. RESULTS: Contact between bone and prosthesis was observed in 45.4% of interfaces in group A and 27.8% in group B (p = 0.126). The significant increase of areas without visible cement interlocking in the anteroposterior direction in group A (p = 0.005) was not evident in group B (p = 0.262). Penetration around the peg tended to occur more frequently in group B (67.5% vs. 90.6% p = 0.091). Scanning electron microscopy identified no evidence of fissure formations within the bilaminar cement mantle. Free bone cement fragments were documented in 66.7% in both groups with no difference concerning mass (p = 1.0). CONCLUSIONS: This in-vitro study showed a tendency towards a more homogenous cementation of tibial UKAs using a double-layer cementing technique, although most of the differences did not reach the level of significance. However, theoretical downsides of the double-layer cementing technique such as an increased formation of free bone fragments or a microscopically fissure formation within the cement layer could not be detected either.

TKA design-integrated trochlea groove rotation reduces patellofemoral pressure.

PURPOSE: Total knee arthroplasty (TKA) leaves 11-25% of the patients unsatisfied, and patellofemoral joint pain is one cause. This study aimed to compare the differences between kinematics and load transfer in the same knee with axial internal/external rotation of the femoral component (CoRo) versus a separate axial internal/external trochlear groove rotation (TrRo) which is included in the TKA trochlea design. METHODS: A validated weight-bearing finite element model with modifications of the TKA axial femoral component rotation (CoRo) and a modified trochlear rotation (TrRo) was calculated and analysed. RESULTS: Compared to the neutrally implanted TKA at 105° of flexion, a 6° external rotation of the trochlear groove reduced the retropatellar stress by 7%, whereas a 3° internal trochlear groove rotation increased the retropatellar stress by 7%. With femoral component rotation, the tibia inlay stress of 6.7 MPa at 60° of flexion was two times higher both with a 3° internal component rotation and a 6° external rotation. CONCLUSION: These results demonstrate in the tested TKA design that a trochlear groove rotation can reduce retropatellar stress. Additionally, during the TKA operation, the surgeon should be aware of the significant influence of axial femoral component rotation on mechanical inlay stress during flexion and of the fact that even small changes in the patellofemoral joint may influence the tibiofemoral joint. These results support that an external rotation of the femoral component should be preferred in TKA to avoid anterior knee pain. Furthermore, new developed TKA designs should integrate an externally rotated trochlea groove.

Periprosthetic bone quality affects the fixation of anatomic glenoids in total shoulder arthroplasty: in vitro study.

BACKGROUND: Glenoid loosening, a common complication of shoulder arthroplasty, could relate to implant design and bone quality. However, the role of bone density has not been tested experimentally yet. In this study, tests on cadaveric specimens of varying bone density were performed to evaluate the effects of bone quality on loosening of typical anatomic glenoid implants. METHODS: Cadaveric scapulae scanned with a quantitative computed tomography scanner to determine bone mineral density (BMD) were implanted with either pegged or keeled cemented glenoid components and tested under constant glenohumeral load while a humeral head component was moved cyclically in the inferior and superior directions. Implant superior and inferior edge lifting, defined as displacement from the underlying bone, was measured with linear variable differential transducers until we reached 23,000 test cycles, and statistical testing was performed for differences in edge lifting due to implant design and related to periprosthetic BMD. RESULTS: Edge lifting was statistically significant at all time points, but on average, implant design had no effect. Lifting was highest in specimens in which BMD below the lifting edge was lower, with trends of increased displacement with decreased BMD. CONCLUSIONS: Implant lifting was greater in glenoids of lower bone density for both implant designs. This finding suggests that fixation failure will most likely occur in bone of lower density and that the fixation design itself may play a secondary role.

Induction of Articular Chondrogenesis by Chitosan/Hyaluronic-Acid-Based Biomimetic Matrices Using Human Adipose-Derived Stem Cells.

Cartilage repair using tissue engineering is the most advanced clinical application in regenerative medicine, yet available solutions remain unsuccessful in reconstructing native cartilage in its proprietary form and function. Previous investigations have suggested that the combination of specific bioactive elements combined with a natural polymer could generate carrier matrices that enhance activities of seeded stem cells and possibly induce the desired matrix formation. The present study sought to clarify this by assessing whether a chitosan-hyaluronic-acid-based biomimetic matrix in conjunction with adipose-derived stem cells could support articular hyaline cartilage formation in relation to a standard chitosan-based construct. By assessing cellular development, matrix formation, and key gene/protein expressions during in vitro cultivation utilizing quantitative gene and immunofluorescent assays, results showed that chitosan with hyaluronic acid provides a suitable environment that supports stem cell differentiation towards cartilage matrix producing chondrocytes. However, on the molecular gene expression level, it has become apparent that, without combinations of morphogens, in the chondrogenic medium, hyaluronic acid with chitosan has a very limited capacity to stimulate and maintain stem cells in an articular chondrogenic state, suggesting that cocktails of various growth factors are one of the key features to regenerate articular cartilage, clinically.