Adsorption behaviors of branched cationic gemini surfactants and wettability in quartz-solution-air systems.

The adsorption and wetting on quartz surfaces by aqueous solutions of xylyl-substituted biquaternary ammonium salt gemini surfactants with different spacer groups (C3 and C6), have been investigated. The interfacial properties of surfactant solutions such as contact angle, adhesional tension (γLV cos θ), quartz-water interfacial tension (γSL) as well as adhesion work (WA) have been estimated. The obtained results show that C3 and C6 have similar adsorption behavior on quartz surfaces. Before critical micelle concentration (cmc) is reached, the contact angles of gemini surfactants slowly increase with the increasing concentration, and the adsorption amount at the water-air interface is almost the same as those at a quartz-water interface. After reaching cmc, the gemini surfactant Cn molecules form a more compact adsorption film through bending the flexible spacer chain, instead of forming a bi-layer. As a result, a further increase in quartz-liquid interfacial tension (γSL) and a consequent increase in contact angle have been observed after cmc. Gemini C6 shows a stronger ability towards hydrophobic modification at a quartz surface than C3, demonstrating the contribution of the longer methylene spacer to the hydrophobic modification of the quartz surface.

Wetting of polymer surfaces by aqueous solutions of branched cationic Gemini surfactants.

The adsorption of xylyl-substituted biquaternary ammonium salt Gemini surfactants with different spacer (C3 and C6) at polytetrafluoroethylene (PTFE) and polymethylmethacrylate (PMMA) surfaces has been investigated and the different adsorption parameters such as surface tension, contact angle, adhesional tension, solid-water interfacial tension and work of adhesion have been estimated. The results show that C3 and C6 have similar adsorption behaviors at PTFE and PMMA surfaces. C3 and C6 adsorb gradually at a PFTE-water interface via hydrophobic interactions and the adsorption amounts at the water-air interface are almost three times higher than those at the PTFE-water interface due to the steric hindrance effect. However, the contact angle keeps constant throughout the experimental concentration range because the decrease in surface tension just counterbalances the decrease in PFTE-water interfacial tension. On the other hand, C3 and C6 adsorb at the PMMA surface via polar interactions between xylyl and functional groups of PMMA before CMC. Similar to PTFE, the increase in PMMA-water interfacial tension compensates the decrease in surface tension and the contact angle also shows a stationary value before the CMC. A bi-layer structure of C3 and C6 will be formed at the PMMA-water interface via hydrophobic interaction and PMMA-water interfacial tension decreases consequently after the CMC, which results in the decrease in contact angle.

Effects of Calcium Ions on the Solubility and Rheological Behavior of a C22-Tailed Hydroxyl Sulfobetaine Surfactant in Aqueous Solution.

Effects of calcium ions (Ca2+) on the solubility, aggregate structure, and rheological behavior of a C22-tailed zwitterionic surfactant, erucyl dimethyl amidopropyl hydroxyl sulfobetaine (EHSB), have been investigated in aqueous solution. In comparison with sodium ions (Na+), Ca2+ ions exhibit a much higher efficiency in decreasing the Krafft temperature (TK) of EHSB. Specifically, contrary to Na+ ions which have no obvious effect on the rheological properties of the EHSB solution, Ca2+ ions increase the viscosity of the EHSB solution at lower EHSB concentration, and enhance its elasticity at higher EHSB concentration. Moreover, Ca2+ ions raise the temperature needed for the elastic-to-viscous transition of the EHSB solution at higher concentration. At lower EHSB concentration, the hydrophobic interaction between the ultralong hydrocarbon chains induces a tighter packing of the hydrophobic chains by forming a more stretched configuration, while at higher EHSB concentration, the electrostatic attraction between Ca2+ ions and the sulfonate groups of EHSB induces a tighter packing of the headgroups by forming Ca2+-mediated bridges among the EHSB headgroups. Besides, the above interactions may strengthen the hydrogen bonding of OH groups and/or of C═O amide groups, which in turn facilitates the compact packing of the surfactant molecules in aggregates and promotes the growth and entanglement of wormlike micelles. Thus, the EHSB solution shows Ca2+-dependent rheological behaviors. The solubility and rheological properties of the ultralong chain surfactant solution can be simultaneously improved with the addition of divalent Ca2+ ions.

Molecular mechanism and therapeutic targeting of necrosis, apoptosis, pyroptosis, and autophagy in cardiovascular disease.

ABSTRACT: Cell death occurs in various tissues and organs in the body. It is a physiological or pathological process that has different effects. It is of great significance in maintaining the morphological function of cells and clearing abnormal cells. Pyroptosis, apoptosis, and necrosis are all modes of cell death that have been studied extensively by many experts and scholars, including studies on their effects on the liver, kidney, the heart, other organs, and even the whole body. The heart, as the most important organ of the body, should be a particular focus. This review summarizes the mechanisms underlying the various cell death modes and the relationship between the various mechanisms and heart diseases. The current research status for heart therapy is discussed from the perspective of pathogenesis.

Peptide-Mediated Synthesis of Zeolitic Imidazolate Framework-8: Effect of Molecular Hydrophobicity, Charge Number and Charge Location.

Three amphiphilic peptides with varied molecular hydrophobicity, charge number and charge location have been designed as regulators to modulate the crystal growth of zeolitic imidazolate framework-8 (ZIF-8). All three peptides can interact with ZIF-8 to inhibit {100} facet growth and produce truncated cubic crystals. The peptide's molecular hydrophobicity plays a dominant role in defining the final morphology and size of the ZIF-8 crystals. The peptides with less charge and higher hydrophobicity can promote nuclei formation and crystal growth to give smaller ZIF-8 crystals. However, the charge located in the center of the molecular hydrophobic region has little effect on the crystal nucleation and growth due to the shielding of its charge by molecular aggregation. The study provides insights into the effect of molecular charge and hydrophobicity on ZIF-8 crystal growth and is helpful for guiding the molecular design for regulating the synthesis of metal-organic framework materials.

Thickness-Dependent Evolution of Piezoresponses and Stripe 90° Domains in (101)-Oriented Ferroelectric PbTiO3 Thin Films.

High-index ferroelectric films as (101)-orientated ones exhibit enhanced dielectric responses, piezoelectric responses, and exotic ferroelectric switching behaviors, which are potential candidates for applications in memories and capacitors. However, possible domain patterns and domain wall structures in (101)-oriented ferroelectric thin films are still elusive, which results in difficulties in understanding the origin and further modulating their special properties. In this work, a series of PbTiO3 (PTO) thin films with 35, 50, 60, and 70 nm in thickness were grown on (101)-oriented (LaAlO3)0.29(SrTa1/2Al1/2O3)0.71 (LSAT(101)) substrates by pulsed laser deposition and investigated by both piezoresponse force microscopy (PFM) and (scanning) transmission electron microscopy ((S)TEM). PFM measurements reveal that periodic stripe domains are dominant in 50 nm thick PTO films. Besides stripe domains, a/ c domains appear in films with thickness more than 60 nm. A thickness-dependent evolution of piezoresponse amplitude indicates that the 50 nm thick PTO films demonstrate a superior piezoresponse. Electron diffraction and contrast analysis clarify that all these (101)-oriented PTO films contain periodic stripe ferroelectric 90° domains. The domain periods increase with the film thickness following Kittel's law. Aberration-corrected STEM imaging reveals that the stripe ferroelectric 90° domains have an alternate arrangement of wide and narrow c domains with polarization directions along [100] for c1 domains and [001̅] for c2 domains, forming a "head-to-tail" polarization configuration. Further strain analysis reveals that stripe domains have uniform strain distributions and distinct lattice rotations around domain walls. It is proposed that the periodic arrangement of high-density stripe 90° domains in 50 nm thick PTO films is the main contributor to the superior piezoresponse behavior. These results are expected to provide useful information to understand the domain structures in (101)-oriented PTO thin films and thus facilitate further modulation of the properties for potential applications.

Polarization Rotation in Ultrathin Ferroelectrics Tailored by Interfacial Oxygen Octahedral Coupling.

Multiple polar states and giant piezoelectric responses could be driven by polarization rotation in ferroelectric films, which have potential functionalities in modern material applications. Although theoretical calculations have predicted polarization rotation in pure PbTiO3 films without domain walls and strains, direct experiment has rarely confirmed such polar states under this condition. Here, we observed that interfacial oxygen octahedral coupling (OOC) can introduce an oxygen octahedral rotation, which induces polarization rotation in single domain PbTiO3 films with negligible strains. We have grown ultrathin PbTiO3 films (3.2 nm) on both SrTiO3 and Nb:SrTiO3 substrates and applied aberration-corrected scanning transmission electron microscopy (STEM) to study the interfacial OOC effect. Atomic mappings unit cell by unit cell demonstrate that polarization rotation occurs in PbTiO3 films on both substrates. The distortion of oxygen octahedra in PbTiO3 is proven by annular bright-field STEM. The critical thickness for this polarization rotation is about 4 nm (10 unit cells), above which polarization rotation disappears. First-principles calculations manifest that the interfacial OOC is responsible for the polarization rotation state. These results may shed light on further understanding the polarization behavior in ultrathin ferroelectrics and be helpful to develop relevant devices as polarization rotation is known to be closely related to superior electromechanical responses.

Study on the impact of morselized bones on biological binding of HA-coated femoral stem in dogs.

The impact of the dog's morselized autologous bone implantation into femoral medullary cavity on binding in the hydroxyapatite-coated femoral stem prosthesis-bone interface was studied. Twenty-four adult mongrel dogs were divided into 2 groups: experimental and control. The experimental group's medullary cavity was filled with morselized autologous bone. Artificial femoral-stem replacements at the right side were then carried out. At 1, 3, and 6 months postoperatively, computed tomography (CT) values reflecting changes in bone density were measured. A histological observation to check prosthesis-bone interface contact ratios and bone growth was conducted. Analysis of radiographs of slices was made using Interactive Data Language (IDL; ITT Visual Information Solutions, Boulder, Colorado) software. Results showed that the experimental group fared better than the control group, and the difference was statistically significant (P<.05). Stereomicroscope-based observation showed that the number of trabecular bones in the experimental group was larger than that of the control group, and bone growth of the experimental group was also better than that of the control group. Inverted microscope observation showed that the binding degree between prosthesis and trabecular bone of the experimental group was higher than that of the control group. Comparatively, the experimental group's trabecular bone had more osteogenic cells. The binding between morselized autologous bone and hydroxyapatite-coated femoral stem prosthesis can improve direct bone-contact ratios, and the experimental group's number of newly formed trabecular bone was significantly larger than that of the control group.