RESUMO
The Si window is the most widely used internal reflection element (IRE) for electrochemical attenuated total reflection surface-enhanced infrared absorption spectroscopy (ATR-SEIRAS), yet local chemical etching on Si by concentrated OH- anions bottlenecks the reliable application of this method in strong alkaline electrolytes. In this report, atomic layer deposition of a 25 nm nonconductive TiO2 barrier layer on the reflecting plane of a Si prism is demonstrated to address this challenge. In situ ATR-SEIRAS measurement on a Au film electrode with the Si/TiO2 composite IRE in 1 M NaOH reveals reversible global spectral features without spectral distortion at 1000-1300 cm-1, in stark contrast to those obtained with a bare Si window. By applying this structured ATR-SEIRAS, ethanol electrooxidation on a Pt/C catalyst in 1 and 5 M NaOH is explored, manifesting that such high pH values prevent the adsorption of as-formed acetate in the C2 pathway but not that of CO intermediate in the C1 pathway.
RESUMO
Complete ethanol oxidation reaction (EOR) in C1 pathway with 12 transferred electrons is highly desirable yet challenging in direct ethanol fuel cells. Herein, PtRh jagged nanowires synthesized via a simple wet-chemical approach exhibit exceptional EOR mass activity of 1.63 A mgPt-1 and specific activity of 4.07 mA cm-2 , 3.62-fold and 4.28-folds increments relative to Pt/C, respectively. High proportions of 69.33% and 73.42% of initial activity are also retained after chronoamperometric test (80 000 s) and 1500 consecutive potential cycles, respectively. More importantly, it is found that PtRh jagged nanowires possess superb anti-CO poisoning capability. Combining X-ray absorption spectroscopy, X-ray photoelectron spectroscopy as well as density functional theory calculations unveil that the remarkable catalytic activity and CO tolerance stem from both the Rh-induced electronic effect and geometric effect (manifested by shortened PtâPt bond length and shrinkage of lattice constants), which facilitates EOR catalysis in C1 pathway and improves reaction kinetics by reducing energy barriers of rate-determining steps (such as *CO â *COOH). The C1 pathway efficiency of PtRh jagged nanowires is further verified by the high intensity of CO2 relative to CH3 COOH/CH3 CHO in infrared reflection absorption spectroscopy.
RESUMO
Plasmon-mediated electrocatalysis that rests on the ability of coupling localized surface plasmon resonance (LSPR) and electrochemical activation, emerges as an intriguing and booming area. However, its development seriously suffers from the entanglement between the photoelectronic and photothermal effects induced by the decay of plasmons, especially under the influence of applied potential. Herein, using LSPR-mediated CO2 reduction on Ag electrocatalyst as a model system, we quantitatively uncover the dominant photoelectronic effect on CO2 reduction reaction over a wide potential window, in contrast to the leading photothermal effect on H2 evolution reaction at relatively negative potentials. The excitation of LSPR selectively enhances the CO faradaic efficiency (17-fold at -0.6â VRHE ) and partial current density (100-fold at -0.6â VRHE ), suppressing the undesired H2 faradaic efficiency. Furthermore, in situ attenuated total reflection-surface enhanced infrared absorption spectroscopy (ATR-SEIRAS) reveals a plasmon-promoted formation of the bridge-bonded CO on Ag surface via a carbonyl-containing C1 intermediate. The present work demonstrates a deep mechanistic understanding of selective regulation of interfacial reactions by coupling plasmons and electrochemistry.
RESUMO
A wide spectrum of state-of-the-art characterization techniques have been devised to monitor the electrode-electrolyte interface that dictates the performance of electrochemical devices. However, coupling multiple characterization techniques to realize in situ multidimensional analysis of electrochemical interfaces remains a challenge. Herein, we presented a hyphenated differential electrochemical mass spectrometry and attenuated total reflection surface enhanced infrared absorption spectroscopy analytical method via a specially designed electrochemical cell that enables a simultaneous detection of deposited and volatile interface species under electrochemical reaction conditions, especially suitable for non-aqueous, electrolyte-based energy devices. As a proof of concept, we demonstrated the capability of the homemade setup and obtained the valuable reaction mechanisms, by taking the tantalizing reactions in non-aqueous lithium-ion batteries (i.e., oxidation and reduction processes of carbonate-based electrolytes on Li1+xNi0.8Mn0.1Co0.1O2 and graphite surfaces) and lithium-oxygen batteries (i.e., reversibility of the oxygen reaction) as model reactions. Overall, we believe that the coupled and complementary techniques reported here will provide important insights into the interfacial electrochemistry of energy storage materials (i.e., in situ, multi-dimensional information in one single experiment) and generate much interest in the electrochemistry community and beyond.
RESUMO
The electro-reforming of glycerol is an emerging technology of simultaneous hydrogen production and biomass valorization. However, its complex reaction network and limited catalyst tunability restrict the precise steering toward high selectivity. Herein, we incorporated the chelating phenanthrolines into the bulk nickel hydroxide and tuned the electronic properties by installing functional groups, yielding tunable selectivity toward formate (max 92.7 %) and oxalate (max 45.3 %) with almost linear correlation with the Hammett parameters. Further combinatory study of intermediate analysis and various spectroscopic techniques revealed the electronic effect of tailoring the valence band that balances between C-C cleavage and oxidation through the key glycolaldehyde intermediate. A two-electrode electro-reforming setup using the 5-nitro-1,10-phenanthroline-nickel hydroxide catalyst was further established to convert crude glycerol into pure H2 and isolable sodium oxalate with high efficiency.
RESUMO
A balanced detection of both adsorbates and dissolved species is very important for the clarification of the electrochemical reaction mechanism yet remains a major challenge for different modes of electrochemical infrared (IR) spectroscopy. Among others, conventional attenuated total reflection-surface-enhanced IR absorption spectroscopy (ATR-SEIRAS) is far less sensitive to low-concentration solution species than to surface species. We report herein an electrochemical wide-frequency ATR-SEIRAS with a novel thin-layer flow cell design, fulfilling the simultaneous detection of the variations of surface and solution species. This setup consists of a silicon wafer (with one side micromachined and the other side metallized), a thin-layer electrolyte structure with tunable thickness and flow rate, and a tilt-correction system based on laser collimation, enabling a well-controlled mass transport within the electrolyte layer and the spectral differentiation of solution species from adsorbates. Using acidic methanol oxidation on a Pt film electrode as a model system, besides SEIRA bands for adsorbed CO and formate intermediates, IR spectral signals for dissolved products CO2, formic acid, and methyl formate can be readily identified for a quiescent electrolyte layer of â¼20 µm, which are otherwise undetected with conventional ATR-SEIRAS, as indicated by the trend of spectral features with increasing thickness or flow rate.
Assuntos
Eletrólitos , Eletroquímica , Eletrodos , Espectrofotometria Infravermelho/métodos , Propriedades de SuperfícieRESUMO
Electro-reforming of renewable biomass resources is an alternative technology for sustainable pure H2 production. Herein, we discovered an unconventional cation effect on the concurrent formate and H2 production via glycerol electro-reforming. In stark contrast to the cation effect via forming double layers in cathodic reactions, residual cations at the anode were discovered to interact with the glycerol oxidation intermediates to steer its product selectivity. Through a combination of product analysis, transient kinetics, crown ether trapping experiments, in situ IRRAS and DFT calculations, the aldehyde intermediates were discovered to be stabilized by the Li+ cations to favor the non-oxidative C-C cleavage for formate production. The maximal formate efficiency could reach 81.3 % under ≈60â mA cm-2 in LiOH. This work emphasizes the significance of engineering the microenvironment at the electrode-electrolyte interface for efficient electrolytic processes.
RESUMO
Ethanol, as a sustainable biomass fuel, is endowed with the merits of theoretically high energy density and environmental friendliness yet suffers from sluggish kinetics and low selectivity toward the desired complete electrooxidation (C1 pathway). Here, the localized surface plasmon resonance (LSPR) effect is explored as a manipulating knob to boost electrocatalytic ethanol oxidation reaction in alkaline media under ambient conditions by appropriate visible light. Under illumination, Au@Pt nanoparticles with plasmonic core and active shell exhibit concurrently higher activity (from 2.30 to 4.05 A mgPt-1 at 0.8 V vs RHE) and C1 selectivity (from 9 to 38% at 0.8 V). In situ attenuated total reflection-surface enhanced infrared absorption spectroscopy (ATR-SEIRAS) provides a molecular level insight into the LSPR promoted C-C bond cleavage and the subsequent CO oxidation. This work not only extends the methodology hyphenating plasmonic electrocatalysis and in situ surface IR spectroscopy but also presents a promising approach for tuning complex reaction pathways.
RESUMO
In situ spectroscopic characterization of the interfacial structure of an organic additive at a Cu electrode is essential for a mechanistic understanding of Cu superfilling at the molecular level. In this work, we demonstrate wide-frequency attenuated total reflection surface-enhanced infrared absorption spectroscopy (wf-ATR-SEIRAS) to elucidate the dissociative adsorption of bis(sodium sulfopropyl)-disulfide (a typical accelerator) on a Cu electrode in conjunction with the electrochemical quartz crystal microbalance measurement and modeling calculations. The wf-ATR-SEIRAS clearly identifies the peaks featuring the sulfonate and methylene groups as well as the C-Ssulfonate and C-Sthiol vibrations of the adsorbate. Analysis of relative peak intensities from 1100 to 650 cm-1 reveals a more tilted alkyl chain axis for the thiolate on Cu than that on Au, which is supported by comparative density functional theory calculations. This work opens a new avenue for the wf-ATR-SEIRAS to study interfacial structures of electroplating additives related to advanced microelectronics manufacture.
RESUMO
High-sensitivity and wide-frequency attenuated total reflection surface-enhanced infrared absorption spectroscopy (ATR-SEIRAS) is highly demanded in unraveling electrocatalytic processes at the molecular level. In this work, an in situ ATR-SEIRAS technique incorporating a micromachined Si wafer window, p-polarized infrared radiation, and isotope labeling is extended to revisit the acetaldehyde oxidation reaction (AOR) on a Pt electrode in an acidic medium. New spectral features in the fingerprint region are detected, including ω(C-H) at 1078 cm-1 and νas(C-C-O) at 919 cm-1 for adsorbed acetaldehyde and δ(O-C-O) at 689 cm-1 for adsorbed acetate, besides the other enhanced and clearly discriminated spectral signals at higher frequencies. Time-evolved and potential-dependent ATR-SEIRAS measurements together with advanced density functional theory calculations considering the coadsorption of CO and C2 species enable clarification of the structures and roles of surface C2 intermediates (η1(C)-acetyl and η1(H)-acetaldehyde), as reflected by the two bands at 1630 and 1663 cm-1, respectively, leading to updated pathways for the AOR on a Pt electrode.
RESUMO
Cubic, octahedral and rhombic dodecahedral Pd nanocrystals were synthesized and examined as nanocatalysts for electro-oxidation of ethanol and ethylene glycol. Combined electrochemical measurements and density functional theory calculations reveal that nanofacet-dependent affinity and reactivity of OHads and COads are closely linked to the C2 alcohol oxidation activities, with the highest reactivity found on the Pd nanocubes bounded by {100} facets.
RESUMO
Most electrocatalysts for the ethanol oxidation reaction suffer from extremely limited operational durability and poor selectivity toward the CC bond cleavage. In spite of tremendous efforts over the past several decades, little progress has been made in this regard. This study reports the remarkable promoting effect of Ni(OH)2 on Pd nanocrystals for electrocatalytic ethanol oxidation reaction in alkaline solution. A hybrid electrocatalyst consisting of intimately mixed nanosized Pd particles, defective Ni(OH)2 nanoflakes, and a graphene support is prepared via a two-step solution method. The optimal product exhibits a high mass-specific peak current of >1500 mA mg-1Pd , and excellent operational durability forms both cycling and chronoamperometric measurements in alkaline solution. Most impressively, this hybrid catalyst retains a mass-specific current of 440 mA mg-1 even after 20 000 s of chronoamperometric testing, and its original activity can be regenerated via simple cyclic voltammetry cycles in clean KOH. This great catalyst durability is understood based on both CO stripping and in situ attenuated total reflection infrared experiments suggesting that the presence of Ni(OH)2 alleviates the poisoning of Pd nanocrystals by carbonaceous intermediates. The incorporation of Ni(OH)2 also markedly shifts the reaction selectivity from the originally predominant C2 pathway toward the more desirable C1 pathway, even at room temperature.