Tailoring the physical and chemical properties of Sn1-xCoxO2 nanoparticles: an experimental and theoretical approach.

In this work, we present a coupled experimental and theoretical first-principles investigation on one of the more promising oxide-diluted magnetic semiconductors, the Sn1-xCoxO2 nanoparticle system, in order to see the effect of cobalt doping on the physical and chemical properties. Our findings suggest that progressive surface enrichment with dopant ions plays an essential role in the monotonous quenching of the surface disorder modes. That weakening is associated with the passivation of the oxygen vacancies as the Co excess at the surface becomes larger. Room-temperature 119Sn Mössbauer spectroscopy data analysis revealed the occurrence of a distribution of isomer shifts, related to the different non-equivalent surroundings of Sn4+ ions and the coexistence of Sn2+/Sn4+ at the particle surfaces provoked by the inhomogeneous distribution of Co ions, in agreement with the X-ray photoelectron spectroscopy measurements. Magnetic measurements revealed a paramagnetic behavior of the Co ions dispersed in the rutile-type matrix with antiferromagnetic correlations, which become stronger as the Co content is increased. Theoretical calculations show that a defect with two Co mediated by a nearby oxygen vacancy is the most likely defect. The predicted effects of this defect complex are in accordance with the experimental results.

BNNT/Fe3O4 System as an Efficient Tool for Magnetohyperthermia Therapy.

Nanostructured materials have been widely studied aiming to biomedical applications, primarily for the purpose of carrying drugs or molecules of interest in a selected tissue or organ. In this context, boron nitride nanotubes (BNNTs), when functionalized with specific moieties, could be useful as nanovectors for delivery of proteins, drugs, and also RNAi molecules, due to their capacity to be uptaked by cells. The introduction of magnetic nanoparticles allows the use of such system as a hyperthermia agent. Thus, once it has been targeted to tumor areas, it could kill cancer cells by magnetohyperthermia therapy. In order to study this effect, magnetite nanoparticles were incorporated into hydroxilated BNNT. The system was characterized by transmission electron microscopy (TEM), X-ray photoelectron spectroscopy (XPS), X-ray diffraction (XRD) and vibrating sample magnetometry (VSM). The results obtained show that magnetite nanoparticles are linked to the nanotubes. Magnetic measurements show that coercivity and magnetization were not disturbed after incorporation to the BNNT. Based on this, a new methodology for in vitro magnetohyperthermia experiments was developed, aiming to treat each cell group individually preserving its sterility. The biological assays of the system demonstrate its good cell viability and the great potential of this nanomaterial as a magnetohyperthermia agent for cancer treatment.

Molecular identification of sharks from the genus Sphyrna (Elasmobranchii: Chondrichthyes) in Maranhão Coast (Brazil).

Sharks of the genus Sphyrna are under intense exploitation globally. In Brazil's northern coast, this genus represents a high proportion of fisheries landings and comprises four species. However, due to difficulty of specific identification when specimens are landed, most of the records are limited to the genus level. Here we analyzed the effectiveness of ITS2 (Internal Transcribed Spacer 2 of rDNA) fragment length protocol (Abercrombie et al., 2005) for identifying hammerhead shark species, comparing with the analysis of COI (Cytochrome oxidase subunit I) and ITS2 sequences. We evaluated samples of muscle tissue acquired in the main fishing ports of Maranhão: Carutapera, Raposa e Tutóia. Sampling was conducted between March 2017 to March 2018 and complemented with material deposited in collection (2015). COI results indicated the occurrence of endangered species which are prohibited to be landed. These include Sphyrna mokarran (67%), S. lewini (15%), S. tudes (3%), and S. tiburo (15%). For the ITS2 marker, we investigated the optimization of the protocol developed by Abercrombie (2005) for to improve the use in this geographical area througout design of a new primers.

Chemometric methods in antimalarial drug design from 1,2,4,5-tetraoxanes analogues.

A set of 23 steroidal 1,2,4,5-tetraoxane analogues were studied using quantum-chemical method (B3LYP/6-31 G*) and multivariate analyses (PCA, HCA, KNN and SIMCA) in order to calculate the properties and correlate them with antimalarial activity (log RA) against Plasmodium falciparum clone D-6 from Sierra Leone. PCA results indicated 99.94% of the total variance and it was possible to divide the compounds into two classes: less and more active. Descriptors responsible for separating were: highest occupied molecular orbital energy (HOMO), bond length (O1-O2), Mulliken electronegativity (χ) and Bond information content (BIC0). We use HCA, KNN and SIMCA to explain relationships between molecular properties and biological activity of a training set and to predict antimalarial activity (log RA) of 13 compounds (#24-36) with unknown biological activity. We apply molecular docking simulations to identify intermolecular interactions with a selected biological target. The results obtained in multivariate analysis aided in the understanding of the activity of the new compound's design (#24-36). Thus, through chemometric analyses and docking molecular study, we propose theoretical synthetic routes for the most promising compounds 28, 30, 32 and 36 that can proceed to synthesis steps and in vitro and in vivo assays.

Magnetic studies of CoFe2O4/SiO2 aerogel and xerogel nanocomposites.

The evolution of the structural and magnetic properties of nanocomposites formed by cobalt ferrite particles dispersed in xerogel and aerogel silica matrices (CoFe2O4/SiO2) have been studied as a function of the temperature of preparation and the amount of ferrite dispersed in the matrix. Wet samples with different amounts of CoFe2O4 in SiO2 matrix were prepared by sol-gel process in monolithic form. Xerogel and aerogel samples were prepared by controlled and hypercritical drying, respectively, and heated at various temperatures between 300 and 1100 degrees C. Superparamagnetic behavior has been observed by magnetization studies at room temperature for xerogels prepared at low temperature. Aerogel samples showed significant superparamagnetic fractions for all thermal treatment temperatures as determined by Mössbauer spectroscopy. Magnetization of the nanocomposites at 10 KOe applied field varied from 1 to 19 emu/g and the coercivity from 90 to 2320 Oe, respectively, for the different morphologies and textures of the analyzed material. The results show that besides the magnetization and coercivity depend on crystallite size, parameters such as ferrite content, porosity and drying conditions greatly influence the nanocomposite magnetic behavior.

Cubic versus spherical magnetic nanoparticles: the role of surface anisotropy.

The magnetic properties of maghemite (gamma-Fe2O3) cubic and spherical nanoparticles of similar sizes have been experimentally and theoretically studied. The blocking temperature, T(B), of the nanoparticles depends on their shape, with the spherical ones exhibiting larger T(B). Other low temperature properties such as saturation magnetization, coercivity, loop shift or spin canting are rather similar. The experimental effective anisotropy and the Monte Carlo simulations indicate that the different random surface anisotropy of the two morphologies combined with the low magnetocrystalline anisotropy of gamma-Fe2O3 is the origin of these effects.

Physiologic and metabolic effects of exogenous kojic acid and tyrosol, chemicals produced by endophytic fungus, on wheat seeds germination.

Antioxidant compounds have the ability to scavenge the reactive oxygen species in an attempt to minimise damage in seeds during the germination. This study aimed to evaluate the physiological and metabolic process of two well-established antioxidant compounds: kojic acid and hydroxyphenyl ethanol (tyrosol), at increasing concentrations, on wheat seeds. The use of different concentrations of tyrosol or kojic acid not showed any interference on seed germination rate. However, we observed isolated effect of antioxidants and their concentrations to: germination speed index, shoot length and electrolyte leakage; and significant interaction between the factors to: seedling total length, seedling fresh matter and α-amylase activity. Our results suggest that the use of antioxidant molecules can be applied on seed treatments for protection against damage oxidative stress and improve seed metabolism.

One-pot synthesis of amine-functionalized graphene oxide by microwave-assisted reactions: an outstanding alternative for supporting materials in supercapacitors.

A simple and straightforward method using microwave-assisted reactions is presented for the functionalization of graphene oxide with aromatic and non-aromatic amines, notedly dibenzylamine (DBA), p-phenylenediamine (PPD), diisopropylamine (DPA) and piperidine (PA). The as-synthesized amine-functionalized graphene oxide materials (amine-GO) were characterized using spectroscopic techniques including XRD, FTIR, 13C NMR, XPS, TEM for imaging and thermogravimetric analysis (TGA). The characterization confirmed the functionalization for all amines, reaching relatively high surface nitrogen atomic concentrations of up to 8.8%. The investigations of electrochemical behavior for the amine-GOs show the significant improvement in GO's electrochemical properties through amine functionalization, exhibiting long life cycle stability and reaching specific capacitance values of up to 290 F g-1 and 260 F g-1 for GO-PA and GO-DPA samples, respectively, confirming their potential application as alternative supporting materials in supercapacitors.

Decarboxylation of oxidized single-wall carbon nanotubes.

A classical protocol widely used in organic chemistry of aromatic and polyaromatic molecules has been successfully applied in this work for the decarboxylation of oxidized single-wall carbon nanotube (SWNT) to rend C-H SWNT derivatives. SWNT produced by arc discharge method have been oxidized during a purification process using strongly oxidant agents, such as hydrogen peroxide and nitric acid. The decarboxylation of oxidized SWNT has been conduced with copper(I) oxide in a 50:50 solution of N-methylpyrrolidone and quinoline. Fourier transform infrared spectroscopy, X-ray photoelectron spectroscopy and acid-base potentiometric titration analyses were carried out to characterize quali and quantitatively the changes in the chemical environment on the SWNT surface in each step of the purification and the decarboxylation process. Those techniques showed the appearance of mainly carboxylic and phenolic groups after the purification process and the disappearance of the carboxylic groups after the decarboxylation reaction. Fourier transform infrared spectroscopy analysis indicated also the formation of aliphatic and aromatic C-H groups. X-ray photoelectron spectroscopy and potentiometric titration results determined an efficiency higher than 90% for our decarboxylation procedure. The purity and structural quality of the SWNT sample used in the decarboxylation process were evaluated by thermogravimetry and Raman spectroscopy. Thermogravimetric analysis identified a purified sample with approximately 80 wt% of SWNT, in fractions distributed in highly structured SWNTs (25 wt%), with distribution in composition, length and structural quality (35 wt%) and with very defective and short tubes (25 wt%). The damages on the purified SWNT walls were characterized by the Raman scattering analysis.

Morphology, structure, and magnetism of FeCo thin films electrodeposited on hydrogen-terminated Si(111) surfaces.

In this work we describe the fabrication of FeCo alloy (less than 10 at% Co) thin films from aqueous ammonium sulfate solutions onto n-type Si(111) substrates using potentiostatic electrodeposition at room temperature. The incorporation of Co into the deposits tends to inhibit Fe silicide formation and to protect deposits against oxidation under air exposure. As the incorporation of Co was progressively increased, the sizes of nuclei consisting of FeCo alloy increased, leading to films with a highly oriented body-centered cubic structure with crystalline texture, where (110) planes remain preferentially oriented parallel to the film surface.

Antibacterial and non-cytotoxic ultra-thin polyethylenimine film.

In recent years, a common strategy, to obtain more uniform and controlled synthesis of polyelectrolytes multilayers (PEMs), relies on a previous polyethylenimine (PEI) coating of the substrate surface. PEI is a synthetic cationic polymer which provides a positive charge distribution on the materials to be covered with PEMs. Despite being an important step, this pre-layer deposition is frequently overlooked and no comprehensive characterizations or deep discussions are reported in literature. In that sense, this work reports on the synthesis of a typical PEI film that works as a precursor for PEMs, and its detailed physicochemical characterization. As many PEMs are produced for antibacterial and biomedical applications, the cytotoxicity of the film was also tested using fibroblasts, and its antibacterial activity was studied using Staphylococcus aureus and Pseudomonas aeruginosa. Our results present the formation of an ultra-thin film of PEI with a thickness around 3.5nm, and with a significant percent of NH3+ (35% of the total amount of N) in its chemical structure; NH3+ is a key chemical group because it is considered an important bacterial killer agent. The film was stable and did not present important cytotoxic effect for fibroblasts up to 7days, contrary to other reports. Finally, the PEI film showed high antibacterial activity against the S. aureus strain: reductions in cell density were higher than 95% up to 24h.

Hyaluronan/chitosan nanofilms assembled layer-by-layer and their antibacterial effect: A study using Staphylococcus aureus and Pseudomonas aeruginosa.

In the last few years, chitosan-based coatings have been proposed as antibacterial surfaces for biomedical devices in order to prevent nosocomial infections. In that sense, this work reports the optimized synthesis of hyaluronan/chitosan (HA/CHI) nanofilms assembled layer-by-layer in order to maximize the antibacterial effect for two important human pathogenic bacteria, Staphylococcus aureus and Pseudomonas aeruginosa. In this assembly, HA forms a soft, highly hydrated, and nontoxic film, whereas CHI shows the antimicrobial characteristics. Our HA/CHI nanofilm synthesis optimization was based on changing pH values of the biopolymer stem-solutions and the consequent variation of their ionization degree. Furthermore, the surface density of primary amino groups, which are related to the antibacterial effect, was also enhanced by increasing the number of HA/CHI bilayers. The antibacterial effect of HA/CHI nanofilms was evaluated by the spread plate counting method for both bacteria. These results were correlated with the morphology of nanofilms (characterized using SEM and AFM), as well as with their chemical properties studied by UV-vis, Kelvin Probe Force microscopy and XPS spectroscopy.

Ultrasonographic guidance of transvenous pacemaker insertion in the emergency department: a report of three cases.

We report three cases in which ultrasound was used in the Emergency Department to facilitate the placement of a temporary transvenous cardiac pacemaker.

Mesoporous silica-magnetite nanocomposite synthesized by using a neutral surfactant.

Magnetite nanoparticles coated by mesoporous silica were synthesized by an alternative chemical route using a neutral surfactant and without the application of any functionalization method. The magnetite (Fe(3)O(4)) nanoparticles were prepared by precipitation from aqueous media, and then coated with mesoporous silica by using nonionic block copolymer surfactants as the structure-directing agents. The mesoporous SiO(2)-coated Fe(3)O(4) samples were characterized by x-ray diffraction, Fourier-transform infrared spectroscopy, N(2) adsorption-desorption isotherms, transmission electron microscopy, (57)Fe Mössbauer spectroscopy, and vibrating sample magnetometry. Our results revealed that the magnetite nanoparticles are completely coated by well-ordered mesoporous silica with free pores and stable (∼8 nm thick) pore walls, and that the structural and magnetic properties of the Fe(3)O(4) nanoparticles are preserved in the applied synthesis route.

Immunoglobulins and other serological parameters in Chagas' disease: evidence for increased IgA levels in the chronic digestive form.

Immunoglobulin levels were measured in serum samples from 36 patients with different clinical forms of chronic Chagas' disease. Increased IgA levels were observed in 50% of the patients in the chronic digestive group and there was a significant correlation with the severity of the disease. IgG and IgM levels were within the normal range. Anti-ssDNA antibodies and EVI (endothelium, vessels and interstitium) antibodies were found in some patients with different clinical forms of the disease.

Dopamine, dobutamine, and phentolamine effects on pulmonary vascular mechanics.

The pressure-flow (P-Q) relationship of the pulmonary vasculature, in an isolated canine lobe perfused under classical zone II conditions, can be characterized by a rectilinear segment at high flow, a curvilinear segment at low flow, and a pulmonary arterial pressure (Ppa) that exceeds alveolar pressure at zero flow. This demonstrates the presence of critical closure in the pulmonary vascular bed. Effects of drugs on pulmonary vascular resistance (PVR) must take the normal P-Q relationship into account. We examined the effect of dopamine (D) and dobutamine (DB), alone and in combination with phentolamine (P), on the slope of the rectilinear segment of the P-Q curve (equivalent to vascular conductance), the extrapolated Ppa intercept (Ppai), and the Ppa at zero flow (Ppaz). Low-dose D (0.4-0.8 mg) and DB (1.0-5.0 mg) did not significantly alter any parameter from control. Higher-dose D (1.2-6.8 mg) and DB (13-38 mg) decreased vascular conductance 32.3 +/- 12.1 (SE) to 50.45 +/- 5.6% (P less than 0.05), and P alone increased conductance 12.0 +/- 2.6% (P less than 0.01) from control with no significant effect on Ppai or Ppaz. The change in conductance with D and DB alone was abolished when either drug was given in combination with P. Ppaz and Ppai decreased significantly from control with DB in combination with P when no significant effect on vascular conductance was noted. The results suggest that lung vessels determining changes in flow resistance are pharmacologically distinct from those subserving critical closure in the pulmonary vascular bed.