Peracetic acid: a practical agent for sterilizing heat-labile polymeric tissue-engineering scaffolds.

Advanced biomaterials and sophisticated processing technologies aim at fabricating tissue-engineering scaffolds that can predictably interact within a biological environment at the cellular level. Sterilization of such scaffolds is at the core of patient safety and is an important regulatory issue that needs to be addressed before clinical translation. In addition, it is crucial that meticulously engineered micro- and nano- structures are preserved after sterilization. Conventional sterilization methods involving heat, steam, and radiation are not compatible with engineered polymeric systems because of scaffold degradation and loss of architecture. Using electrospun scaffolds made from polycaprolactone, a low melting polymer, and employing spores of Bacillus atrophaeus as biological indicators, we compared ethylene oxide, autoclaving and 80% ethanol to a known chemical sterilant, peracetic acid (PAA), for their ability to sterilize as well as their effects on scaffold properties. PAA diluted in 20% ethanol to 1000 ppm or above sterilized electrospun scaffolds in 15 min at room temperature while maintaining nano-architecture and mechanical properties. Scaffolds treated with PAA at 5000 ppm were rendered hydrophilic, with contact angles reduced to 0°. Therefore, PAA can provide economical, rapid, and effective sterilization of heat-sensitive polymeric electrospun scaffolds that are used in tissue engineering.

Mineralization Potential of Electrospun PDO-Hydroxyapatite-Fibrinogen Blended Scaffolds.

The current bone autograft procedure for cleft palate repair presents several disadvantages such as limited availability, additional invasive surgery, and donor site morbidity. The present preliminary study evaluates the mineralization potential of electrospun polydioxanone:nano-hydroxyapatite : fibrinogen (PDO : nHA : Fg) blended scaffolds in different simulated body fluids (SBF). Scaffolds were fabricated by blending PDO : nHA : Fg in the following percent by weight ratios: 100 : 0 : 0, 50 : 25 : 25, 50 : 50 : 0, 50 : 0 : 50, 0 : 0 : 100, and 0 : 50 : 50. Samples were immersed in (conventional (c), revised (r), ionic (i), and modified (m)) SBF for 5 and 14 days to induce mineralization. Scaffolds were characterized before and after mineralization via scanning electron microscopy, Alizarin Red-based assay, and modified burnout test. The addition of Fg resulted in scaffolds with smaller fiber diameters. Fg containing scaffolds also induced sheet-like mineralization while individual fiber mineralization was noticed in its absence. Mineralized electrospun Fg scaffolds without PDO were not mechanically stable after 5 days in SBF, but had superior mineralization capabilities which produced a thick bone-like mineral (BLM) layer throughout the scaffolds. 50 : 50 : 0 scaffolds incubated in either r-SBF for 5 days or c-SBF for 14 days produced scaffolds with high mineral content and individual-mineralized fibers. These mineralized scaffolds were still porous and will be further optimized as an effective bone substitute in future studies.

Electrospinning adipose tissue-derived extracellular matrix for adipose stem cell culture.

Basement membrane-rich extracellular matrices, particularly murine sarcoma-derived Matrigel, play important roles in regenerative medicine research, exhibiting marked cellular responses in vitro and in vivo, although with limited clinical applications. We find that a human-derived matrix from lipoaspirate fat, a tissue rich in basement membrane components, can be fabricated by electrospinning and used to support cell culture. We describe practical applications and purification of extracellular matrix (ECM) from adipose tissue (At-ECM) and its use in electrospinning scaffolds and adipose stem cell (ASC) culture. The matrix composition of this purified and electrospun At-ECM was assessed histochemically for basement membrane, connective tissue, collagen, elastic fibers/elastin, glycoprotein, and proteoglycans. Each histochemical stain was positive in fat tissue, purified At-ECM, and electrospun At-ECM, and to some extent positive in a 10:90 blend with polydioxanone (PDO). We also show that electrospun At-ECM, alone and blended with PDO, supports ASC attachment and growth, suggesting that electrospun At-ECM scaffolds support ASC cultivation. These studies show that At-ECM can be isolated and electrospun as a basement membrane-rich tissue engineering matrix capable of supporting stem cells, providing the groundwork for an array of future regenerative medicine advances.

Science of nanofibrous scaffold fabrication: strategies for next generation tissue-engineering scaffolds.

Native extracellular matrix (ECM) provides structural support to the multicellular organism on a macroscopic scale and establishes a unique microenvironment (niche) to tissue- and organ-specific cell types. Both these functions are critical for optimal function of the organism. These natural ECMs comprise predominantly fibrillar proteins, collagen and elastin and are synthesized as monomers but undergo hierarchical organization into well-defined nanoscaled structural units. The interaction between the cells and ECM is dynamic, reciprocal and essential for tissue development, maintenance of function, repair and regeneration processes. Tissue-engineering scaffolds are synthetic, biomimetic ECM analogues that have great promise in regenerative medicine. Ongoing efforts in mimicking the native ECM in terms of composition and dimension have resulted in three strategies that permit the generation of scaffolds in nanometer dimensions. Although excellent reviews regarding the applications of these strategies in tissue engineering are available, a comprehensive review of the science behind these fabrication techniques does not exist. This review intends to fill this critical gap in the existing knowledge in the fast-expanding field of nanofibrous scaffolds. A thorough understanding of the fabrication processes would enable us to better exploit available technologies to produce superior tissue-engineering scaffolds.

Multiple factor interactions in biomimetic mineralization of electrospun scaffolds.

One of the major limitations in scaffold-based bone tissue engineering has been the inability to increase the loading of biologically active inorganic mineral. The present study introduces a novel two step strategy to increase overall mineral content of electrospun scaffolds and employs multiple factor interaction as a statistic to identify the combination of factors that yields maximal scaffold mineralization. Different amounts of nHA (0, 10, 25 and 50% by wt. of polymer) were electrospun in combination with polydioxanone (PDO) or poly(glycolide: lactide) to generate composite scaffolds. Successful incorporation of nHA within, on and in between nanofibers was confirmed by transmission and scanning electron microscopy. These scaffolds were immersed in different types (conventional, revised, ionic and modified) of simulated body fluid (SBF), prepared at 1x and 4x concentrations and the incubation was carried out either in static or dynamic setting at biomimetic conditions. At 2 weeks, the total amount of mineral within the scaffold was quantified using a modified Alizarin Red-based assay. Each of the five independent factors was analyzed independently and tested for interaction using random effects ANOVA. Statistics revealed significant higher order interactions among factors and the combination of PDO containing 50% nHA incubated in 1x revised SBF resulted in maximum mineralization.