RESUMO
Crystal engineering has exclusively focused on the development of advanced materials based on small organic molecules. We now demonstrate how the cocrystallization of a polymer yields a material with significantly enhanced thermal stability but equivalent mechanical flexibility. Isomorphous replacement of one of the cocrystal components enables the formation of solid solutions with melting points that can be readily fine-tuned over a usefully wide temperature range. The results of this study credibly extend the scope of crystal engineering and cocrystallization from small molecules to polymers.
RESUMO
Metal coordination compound (MCC) glasses [e.g., metal-organic framework (MOF) glass, coordination polymer glass, and metal inorganic-organic complex (MIOC) glass] are emerging members of the hybrid glass family. So far, a limited number of crystalline MCCs can be converted into glasses by melt-quenching. Here, we report a universal wet-chemistry method, by which the super-sized supramolecular MIOC glasses can be synthesized from non-meltable MOFs. Alcohol and acid were used as agents to inhibit crystallization. The MIOC glasses demonstrate unique features including high transparency, shaping capability, and anisotropic network. Directional photoluminescence with a large polarization ratio (≈47 %) was observed from samples doped with organic dyes. This crystallization-suppressing approach enables fabrication of super-sized MCC glasses, which cannot be achieved by conventional vitrification methods, and thus allows for exploring new MCC glasses possessing photonic functionalities.
RESUMO
Three-dimensional X-ray diffraction (3DXRD) is shown to be feasible at the I12 Joint Engineering, Environmental and Processing (JEEP) beamline of Diamond Light Source. As a demonstration, a microstructually simple low-carbon ferritic steel was studied in a highly textured and annealed state. A processing pipeline suited to this beamline was created, using software already established in the 3DXRD user community, enabling grain centre-of-mass positions, orientations and strain tensor elements to be determined. Orientations, with texture measurements independently validated from electron backscatter diffraction (EBSD) data, possessed a â¼0.1° uncertainty, comparable with other 3DXRD instruments. The spatial resolution was limited by the far-field detector pixel size; the average of the grain centre of mass position errors was determined as ±â¼80â µm. An average per-grain error of â¼1â ×â 10-3 for the elastic strains was also measured; this could be reduced in future experiments by improving sample preparation, geometry calibration, data collection and analysis techniques. Application of 3DXRD onto I12 shows great potential, where its implementation is highly desirable due to the flexible, open architecture of the beamline. User-owned or designed sample environments can be used, thus 3DXRD could be applied to previously unexplored scientific areas.
RESUMO
Flufenamic acid (FFA) is a highly polymorphic drug molecule with nine crystal structures reported in the Cambridge Structural Database. This study explores the use of synchrotron X-ray powder diffraction combined with differential scanning calorimetry to study crystallization and polymorphic phase transitions upon heating FFA-polymer amorphous solid dispersions (ASDs). Ethyl cellulose (EC, 4 cp) and hydroxypropylmethylcellulose (HPMC) grades with different viscosities and substitution patterns were used to prepare dispersions with FFA at 5:1, 2:1, 1:1, and 1:5 w/w drug/polymer ratios by quench cooling. We employed a 6 cp HPMC 2910 material and two HPMC 2208 samples at 4000 and 100â¯000 cp. Hyphenated X-ray diffraction (XRD)-differential scanning calorimetry (DSC) studies show that the 6 and 100â¯000 cp HPMCs and 4 cp EC polymers can stabilize FFA form IV by inhibiting the transition to form I during heating. It appears that the polymers stabilize FFA in both amorphous and metastable forms via a combination of intermolecular interactions and viscosity effects. Increasing the polymer content of the ASD also inhibits polymorphic transitions, with drug/polymer ratios of 1:5 w/w resulting in FFA remaining amorphous during heating. The comparison of FFA ASDs prepared with different samples of HPMCs and ECs suggests that the chemical substitution of the polymer (HPMC 2208 has 19-24% methoxy groups and 4-12% hydroxypropyl groups, while HPMC 2910 has 28-30% methoxy groups and 7-12% hydroxypropyl groups) plays a more significant role in directing polymorphic transitions than the viscosity. A previously unreported polymorph of FFA was also noted during heating but its structure could not be determined.
Assuntos
Ácido Flufenâmico , Polímeros , Varredura Diferencial de Calorimetria , Derivados da Hipromelose/química , Polímeros/química , Solubilidade , Difração de Raios XRESUMO
A key property of many quantum materials is that their ground state depends sensitively on small changes of an external tuning parameter, e.g., doping, magnetic field, or pressure, creating opportunities for potential technological applications. Here, we explore tuning of the ground state of the nonsuperconducting parent compound, Fe1+xTe, of the iron chalcogenides by uniaxial strain. Iron telluride exhibits a peculiar (π, 0) antiferromagnetic order unlike the (π, π) order observed in the Fe-pnictide superconductors. The (π, 0) order is accompanied by a significant monoclinic distortion. We explore tuning of the ground state by uniaxial strain combined with low-temperature scanning tunneling microscopy. We demonstrate that, indeed under strain, the surface of Fe1.1Te undergoes a transition to a (π, π)-charge-ordered state. Comparison with transport experiments on uniaxially strained samples shows that this is a surface phase, demonstrating the opportunities afforded by 2D correlated phases stabilized near surfaces and interfaces.
RESUMO
There is an increasing amount of interest in metal-organic frameworks (MOFs) for a variety of applications, from gas sensing and separations to electronics and catalysis. However, the mechanisms by which they crystallize remain poorly understood. Herein, an important new insight into MOF formation is reported. It is shown that, prior to network assembly, crystallization intermediates in the canonical ZIF-8 system exist in a dynamic pre-equilibrium, which depends on the reactant concentrations and the progress of reaction. Concentration can, therefore, be used as a synthetic handle to directly control particle size, with potential implications for industrial scale-up and gas sorption applications. These findings enable the rationalization of apparent contradictions between previous studies of ZIF-8 and opens up new opportunities for the control of crystallization in network solids more generally.
RESUMO
We report a hafnium-containing MOF, hcp UiO-67(Hf), which is a ligand-deficient layered analogue of the face-centered cubic fcu UiO-67(Hf). hcp UiO-67 accommodates its lower ligand:metal ratio compared to fcu UiO-67 through a new structural mechanism: the formation of a condensed "double cluster" (Hf12O8(OH)14), analogous to the condensation of coordination polyhedra in oxide frameworks. In oxide frameworks, variable stoichiometry can lead to more complex defect structures, e.g., crystallographic shear planes or modules with differing compositions, which can be the source of further chemical reactivity; likewise, the layered hcp UiO-67 can react further to reversibly form a two-dimensional metal-organic framework, hxl UiO-67. Both three-dimensional hcp UiO-67 and two-dimensional hxl UiO-67 can be delaminated to form metal-organic nanosheets. Delamination of hcp UiO-67 occurs through the cleavage of strong hafnium-carboxylate bonds and is effected under mild conditions, suggesting that defect-ordered MOFs could be a productive route to porous two-dimensional materials.
RESUMO
Pure-phase cobalt-doped calcium hydroxyapatite ceramic samples with composition Ca10(PO4)6[(CoO2)x(OH)1-2x]2, where x = 0-0.2, were synthesized by high-temperature solid-state reaction, and their crystal structures, vibrational spectra, and magnetic properties were studied. Co atoms are found to enter into the apatite trigonal channel formally substituting H atoms and forming bent dioxocobaltate(II) anions. The anion exhibits single-molecule-magnet (SMM) behavior: slow relaxation of magnetization below 8 K under a nonzero magnetic field with an energy barrier of 63 cm-1. The barrier value does not depend on the concentration of Co ions, virtually coincides with the zero-field-splitting energy as determined from direct-current magnetization, and is very close to the value obtained earlier for cobalt-doped strontium hydroxyapatite. Moreover, the vibration frequencies of the dioxocobaltate(II) anion are found to be the same in calcium and strontium apatite matrixes. The very weak dependence of the SMM parameters on the matrix nature in combination with good chemical and thermal stabilities of the compounds provides wide opportunities to exploit the intrinsic properties of such a SMM-like anion.
RESUMO
Meeting the challenges of Moore's Law, predicting ambitious miniaturization rates of integrated circuits, requires to go beyond the traditional top-down approaches, and to employ synthetic chemistry methods, to use bottom-up techniques. During the recent decades, it has been shown that open-shell coordination compounds may exhibit intramolecular spontaneous magnetization, thus offering promising prospects for storage and processing of digital information. Against this background we regarded it rewarding to implement similar magnetic centers into a ceramic material, which would provide better long-term mechanical and chemical durability. Here we present new robust inorganic compounds containing separate DyO+ ions in an apatite matrix, which behave like single-molecule magnets. The materials exhibit a blocking temperature of 11â K and an energy barrier for spin reversal of a thousand inverse centimeters which is among the highest values ever achieved.
RESUMO
Monitoring of mechanochemical thiocarbamoylation by inâ situ Raman spectroscopy revealed the formation of aryl N-thiocarbamoylbenzotriazoles, reactive intermediates deemed unisolable in solution. The first-time isolation and structural characterization of these elusive molecules demonstrates the ability of mechanochemistry to access otherwise unobtainable intermediates and offers a new range of masked isothiocyanate reagents.
Assuntos
Isotiocianatos/química , Triazóis/química , Cristalografia por Raios X , Indicadores e Reagentes/química , Modelos Moleculares , Análise Espectral Raman , Tioureia/químicaRESUMO
A new chromophore has been identified in copper-doped apatite pigments having the general composition [Sr(10)(PO(4))(6)(Cu(x)OH(1-x-y))(2)], in which x=0.1, 0.3 and y=0.01-0.42. By using X-ray absorption spectroscopy, low-temperature magnetization measurements, and synchrotron X-ray powder structure refinement, it has been shown that the oxygenated compounds contain simultaneously diamagnetic Cu(1+) and paramagnetic Cu(3+) with S=1. Cu(3+) is located at the same crystallographic position as Cu(1+), being linearly coordinated by two oxygen atoms and forming the OCuO(-) anion. The Raman spectroscopy study of [A(10)(PO(4))(6)(Cu(x)OH(1-x-y))(2)], in which A=Ca, Sr, Ba, reveals resonance bands at 651-656 cm(-1) assigned to the symmetric stretching vibration (ν(1)) of OCuO(-). The strontium apatite pigment exhibits a strong paramagnetic anisotropy with an unprecedentedly large negative zero-field splitting parameter (D) of ≈-400 cm(-1). The extreme magnetic anisotropy causes slow magnetization relaxation with relaxation times (τ) up to 0.3 s at T=2 K, which relates the compounds to single-ion magnets. At low temperature, τ is limited by a spin quantum-tunneling, whereas at high temperature a thermally activated relaxation prevails with U(eff)≈48 cm(-1). Strong dependence of τ on the paramagnetic center concentration at low temperature suggests that the spin-spin relaxation dominates in the spin quantum-tunneling process. The compound is the first example of a d-metal-based single-ion magnet with S=1, the smallest spin at which an energy barrier arises for the spin flipping.
RESUMO
We report here a method of making polyketones from the coupling of diketones and diols using a manganese pincer complex. The methodology allows us to access various polyketones (polyarylalkylketone) containing aryl, alkyl, and ether functionalities, bridging the gap between the two classes of commercially available polyketones: aliphatic polyketones and polyaryletherketones. Using this methodology, 12 polyketones have been synthesized and characterized using various analytical techniques to understand their chemical, physical, morphological, and mechanical properties. Based on previous reports and our studies, we suggest that the polymerization occurs via a hydrogen-borrowing mechanism that involves the dehydrogenation of diols to dialdehyde followed by aldol condensation of dialdehyde with diketones to form chalcone derivatives and their subsequent hydrogenation to form polyarylalkylketones.
RESUMO
Recently, giant coercivities (20-42 kOe) and sub-terahertz natural ferromagnetic resonance (NFMR) at 100-300 GHz were observed for single-domain M-type hexaferrite particles with high aluminum substitution. Herein, we fabricated dense ceramics of Sr0.67Ca0.33Fe8Al4O19 and, for the first time, investigated their magnetostatic and magnetodynamic properties in the temperature range of 5-300 K. It was shown that dense ceramics maintain their high magnetic hardness (a coercivity of 10-20 kOe) and NFMR frequencies of 140-200 GHz durably in the entire temperature range. Magnetizing the initially non-magnetized ceramics leads to a considerable decrease in the resonance absorption and to almost complete vanishing of the resonance line at 5 kOe. At the same time, an efficient linear frequency tuning by the external magnetic field was observed for the remanent sample. These findings open new horizons for developing industrial terahertz electronics based on dielectric ferrimagnets.
RESUMO
The combination of poorly-soluble drugs with small molecule co-formers to generate amorphous solid dispersions (ASDs) has great potential to improve dissolution rate and kinetic solubility, and thus increase the bioavailability of these active ingredients. However, such ASDs are known to be unstable and to crystallise upon storage or heating. In this work, we explore the crystallisation of flufenamic acid (FFA) from ASDs prepared with trehalose. FFA-trehalose mixtures were prepared at a range of w/w composition ratios, heated to melting and crash cooled to form ASDs. They were then subject to a further heat/cool cycle, which was monitored by simultaneous differential scanning calorimetry - X-ray diffraction to observe the phase changes occurring. These varied with the composition of the blend. Upon short-term storage, formulations with low trehalose contents (FFA:trehalose 5:1 w/w) recrystallised into form I FFA, while higher trehalose contents crystallised to FFA form IV. When heated, all FFA trehalose combinations ultimately recrystallised into form I before melting. Upon a second cooling cycle, systems with low trehalose content (FFA:trehalose 5:1 w/w) recrystallised into form IV, while higher trehalose contents led to FFA form I. It is thus clear that even with a single excipient it is possible to control the crystallisation pathway through judicious choice of the formulation parameters.
RESUMO
This study focuses on the use of methacrylic acid polymers synthesised via the Reversible Addition Fragmentation chain Transfer (RAFT) polymerisation method for the production of amorphous solid dispersions (ASDs) by ball milling, to kinetically solubilize a poorly water-soluble model drug. The solid-state characteristics and the physical stability of the formulations were investigated using X-ray diffraction, differential scanning calorimetry, and infrared spectroscopy. This was followed by dissolution studies in different media. It was discovered that the acidic polymers of methacrylic acid were capable of interacting with the weakly basic drug lidocaine and its hydrochloride salt form to produce ASDs when a polymer to drug ratio of 70:30 w/w was used. The ASDs remained amorphous following storage under accelerated aging conditions (40 °C and 75% relative humidity) over 8 months. Fast dissolution and increased lidocaine solubility in different media were obtained from the ASDs owing to the reduced microenvironment pH and enhanced solubilization of the drug caused by the presence of the acidic polymer in the formulation. Production of ASDs using well-defined RAFT-synthesised acidic polymers is a promising formulation strategy to enhance the pharmaceutical properties of basic poorly water-soluble drugs.
Assuntos
Lidocaína , Ácidos Polimetacrílicos , Polímeros/química , Solubilidade , Água/química , Composição de Medicamentos/métodosRESUMO
One of the main phases formed at the beginning of the carbonation reaction of cementitious building materials is the calcium hemicarboaluminate (abbreviated as Hc). This AFm (shorthand for hydrated calcium aluminate phases structurally related to hydrocalumite) phase was synthesized, crystallized and then studied by synchrotron X-ray powder diffraction and micro-Raman spectroscopy. At room temperature and standard experimental conditions two major cementitious phases were detected, the Hc phase (as a major phase) and carbonated calcium hemicarboaluminate (abbreviated as cHc). By increasing the temperature the Hc form transforms into cHc. The crystal structures of these important AFm phases were successfully solved and refined in the R3c space group of the trigonal crystal system. Hc has the unit-cell parameters a = 5.7757 (1) and c = 48.812 (2) Å, and cHc the unit-cell parameters a = 5.7534 (1) and c = 46.389 (1) Å. The two crystal structures are composed of positively charged main layers, [Ca(4)Al(2)(OH)(12)](2+), and negatively charged interlayers, [OH(2n)(CO(3))(1 - n)·4H(2)O](2-). The structure of the main layers is typical of the AFm family. Conversely, the interlayer region has a characteristic structure built up from water molecules and statistically distributed anions. In the interlayer, the Hc carbonate and hydroxyl anions are distributed in a 0.25:0.5 ratio, whereas the ratio of the anions in the cHc interlayers is 0.4:0.2.
RESUMO
The performance of Li+ ion batteries (LIBs) is hindered by steep Li+ ion concentration gradients in the electrodes. Although thick electrodes (≥300 µm) have the potential for reducing the proportion of inactive components inside LIBs and increasing battery energy density, the Li+ ion concentration gradient problem is exacerbated. Most understanding of Li+ ion diffusion in the electrodes is based on computational modeling because of the low atomic number (Z) of Li. There are few experimental methods to visualize Li+ ion concentration distribution of the electrode within a battery of typical configurations, for example, coin cells with stainless steel casing. Here, for the first time, an interrupted in situ correlative imaging technique is developed, combining novel, full-field X-ray Compton scattering imaging with X-ray computed tomography that allows 3D pixel-by-pixel mapping of both Li+ stoichiometry and electrode microstructure of a LiNi0.8 Mn0.1 Co0.1 O2 cathode to correlate the chemical and physical properties of the electrode inside a working coin cell battery. An electrode microstructure containing vertically oriented pore arrays and a density gradient is fabricated. It is shown how the designed electrode microstructure improves Li+ ion diffusivity, homogenizes Li+ ion concentration through the ultra-thick electrode (1 mm), and improves utilization of electrode active materials.
RESUMO
To explore an effective route of customizing the superelasticity (SE) of NiTi shape memory alloys via modifying the grain structure, binary Ni55Ti45 (wt) alloys were fabricated in as-cast, hot swaged, and hot-rolled conditions, presenting contrasting grain sizes and grain boundary types. In situ synchrotron X-ray Laue microdiffraction and in situ synchrotron X-ray powder diffraction techniques were employed to unravel the underlying grain structure mechanisms that cause the diversity of SE performance among the three materials. The evolution of lattice rotation, strain field, and phase transformation has been revealed at the micro- and mesoscale, and the effect of grain structure on SE performance has been quantified. It was found that (i) the Ni4Ti3 and NiTi2 precipitates are similar among the three materials in terms of morphology, size, and orientation distribution; (ii) phase transformation happens preferentially near high-angle grain boundary (HAGB) yet randomly in low-angle grain boundary (LAGB) structures; (iii) the smaller the grain size, the higher the phase transformation nucleation kinetics, and the lower the propagation kinetics; (iv) stress concentration happens near HAGBs, while no obvious stress concentration can be observed in the LAGB grain structure during loading; (v) the statistical distribution of strain in the three materials becomes asymmetric during loading; (vi) three grain lattice rotation modes are identified and termed for the first time, namely, multi-extension rotation, rigid rotation, and nondispersive rotation; and (vii) the texture evolution of B2 austenite and B19' martensite is not strongly dependent on the grain structure.
RESUMO
Correction for 'High-coercivity hexaferrite ceramics featuring sub-terahertz ferromagnetic resonance' by Evgeny A. Gorbachev et al., Mater. Horiz., 2022, 9, 1264-1272, DOI: https://doi.org/10.1039/D1MH01797G.
RESUMO
Herein, we demonstrate for the first time compact ferrite ceramics with giant coercivity. The materials are manufactured via sintering single-domain Sr0.67Ca0.33Fe8Al4O19 particles synthesized by a citrate-nitrate auto-combustion method. The obtained ceramics show coercivities up to 22.5 kOe and natural ferromagnetic resonance frequencies (NFMR) in a sub-THz range of 160-282 GHz. At a maximum density of 95%, the sample displays coercivity of 18.5 kOe, which is the highest value among dense ferrite materials reported so far. In addition, we report an unusual blueshift of the NFMR frequency from 160 to 200 GHz, which occurs during material sintering.